Table of Contents
Advertisement
Installing the optional iDRAC port card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Ensure that you follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Keep the Phillips #2 screwdriver ready.
4.
Remove the cooling shroud.
5.
If installed, remove the expansion card riser.
Steps
1.
Align and insert the tabs on the iDRAC port card into the slots on the chassis.
2.
Insert the iDRAC port card into the connector on the system board.
3.
Tighten the screws that secure the iDRAC port card holder to the system board.
Figure 55. Installing the iDRAC port card
1.
iDRAC port card holder
3.
screw (2)
2.
iDRAC port
4.
SD vFlash media card
131
Advertisement
Table of Contents
Troubleshooting
