Table of Contents
Advertisement
SPECIFICATIONS
Specification
Type
Speaker unit(s)
1. Super tweeter
2. Tweeter
3. Woofer
Input power (IEC)
Output sound pressure
Cross over frequency
Frequency range
Dimensions (W x H x D)
Mass
Notes :
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
System : SC-VK650GC-S
System : SC-VK650GCPS
ORDER NO. MD0603107C3
3 way, 3 speaker system (Bass
Impedance 4
Piezo type
6 cm cone type
16 cm cone type
100 W (Max)
82 dB/W (1.0 m)
4.16 kHz, 10 kHz
30 Hz to 28 kHz (-16 dB)
38 Hz to 21 kHz (-10 dB)
220 mm x 330 mm x 182 mm
Music Center : SA-VK650GC-S
Front Speaker : SB-VK650GC-S
Subwoofer : SB-WVK650GC-S
Music Center : SA-VK650GCPS
Front Speaker : SB-VK650GC-S
Subwoofer : SB-WVK650GC-S
1
Speaker System
SB-VK650GC
Colour
(S)... Silver Type
reflex)
2.6 kg
Advertisement
Table of Contents
Related Manuals for Panasonic SB-VK650GC
Summary of Contents for Panasonic SB-VK650GC
- Page 1 Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. Music Center : SA-VK650GC-S System : SC-VK650GC-S Front Speaker : SB-VK650GC-S Subwoofer : SB-WVK650GC-S Music Center : SA-VK650GCPS System : SC-VK650GCPS Front Speaker : SB-VK650GC-S...
-
Page 2: Assembling And Disassembling
Music Center : SA-VK650GCSS System : SC-VK650GCSS Front Speaker : SB-VK650GC-S Subwoofer : SB-WVK650GC-S Music Center : SA-VK650GCTS System : SC-VK650GCTS Front Speaker : SB-VK650GC-S Subwoofer : SB-WVK650GC-S Music Center : SA-VK650GN-S System : SC-VK650GN-S Front Speaker : SB-VK650GC-S Subwoofer : SB-WVK650GC-S... -
Page 3: Disassembly Flow Chart
Below is the list of disassembly sections - Disassembly of Front panel assembly - Disassembly of Ceramic buzzer - Disassembly of Tweeter - Disassembly of Woofer 1.1. Disassembly flow chart The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the servicing. - Page 4 Step 2: Secure the wooden cabinet assembly firmly, then remove the front panel from the wooden cabinet assembly as shown in the picture. 1.3. Disassembly of Ceramic buzzer Follow (step 1) to (step 2) in item 1.2. Step 1: Remove the glue from wire assembly. 1.4.
- Page 5 Step 1: Detach the (+) black and (-) yellow wires. Step 2: Remove 4 screws. 1.5. Disassembly of Woofer Follow (step 1) to (step 2) in item 1.2.
- Page 6 Step 1: Detach the (+) red and (-) black wires. Step 2: Remove 4 screws. - Disassembly of Wooden cabinet assembly Follow (step 1) to (step 2) in item 1.2. Follow (step 1) in item 1.4.
-
Page 7: Connection Of The Speaker Cables
Follow (step 1) in item 1.5. 2. Connection of the Speaker Cables - Be sure to connect speaker cables before connecting the AC power supply cord. - The load impedance of any speaker used with this unit must be 4 - Be sure to connect the cable from the right speaker to the right terminal and the cable from the left speaker to the left terminal. - Page 8 Notes on speaker use - You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. - Reduce the volume in the following cases to avoid damage. - When playing distorted sound. - When the speakers emit strange noise (howling) from a / microphone or record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument.
-
Page 9: Exploded View
4. Cover walls and windows with a thick curtain. 5. Keep your speakers at least 10 mm away from the system for proper ventilation. 6. Place the subwoofer on the floor or a strudy shelf so that it would not cause vibration. - Page 10 4.2. Packaging...
-
Page 11: Replacement Parts List
5. Replacement Parts List Notes : - Important safety notice : When replacing any of these components, be sure to use only manufacturer’s specified parts shown in the parts list. - [M] markings in the Remarks columns indicates parts supplied by PAVCSG.