1 Service Navigation 1.1. System Information (SB-AKX32LM-K) SB-AKX32LM-K is use for the following main models: SC-AKX32LM-K 1.2. Front Speakers (SB-AKX32LM-K) The illustrations for the speakers will be described in this manual. • Disassembly and Assembly Instructions • Wiring Connection Diagram •...
3 Disassembly and Assembly Instructions “ATTENTION SERVICER” Some chassis components may have sharp edges. Be careful when disassembling and servicing. This section describes procedures for checking the operation and replacing the main components. For reassembly after operation checks or replacement, reverse the respective procedures. Special reassembly procedures are described only when required.
3.1. Disassembly of Front Panel Unit Step 4: Detach the Front Panel Unit slightly as arrow shown. Step 1: Remove 4 screws. Caution: Do not exert strong force as it may damage the wiring within. Step 2: Insert flathead screwdriver into the grooves and apply Step 5: Detach the yellow (+) and black (-) speaker wires.
Page 6
Step 6: Remove the Front Panel Unit. 3.1.2. Disassembly of Full Range Speaker (SP2) • Refer to “Disassembly of Front Panel Unit”. Step 1: Remove 4 screws. 3.1.1. Disassembly of Tweeter Speaker (SP1) • Refer to “Disassembly of Front Panel Unit”. Step 2: Detach the red (+) and black (-) speaker wires.
3.2. Replacement of Speaker Connector Housing 3.2.1. Disassembly Step 3: Insert the (-) speaker wire into the (-) hole of the speaker connector housing. Step 1: Use a paper clip push the Speaker Wire head until it Note: Push in the speaker wire until hear the “click” sound. hide inside the Speaker Connector Housing.
Page 11
Safety Ref. Part No. Part Name & Remarks Safety Ref. Part No. Part Name & Remarks Description Description CABINET AND CHAS- PACKING MATERIALS RPNM0217T/B POLYFOAM RYPM02851 FRONT PANEL ASS’Y RPFM0049 MIRAMAT BAG RKPM0135 SPEAKER BOX ASS’Y KN-MSA-22-02 SPK CONNECTOR LF (P8) HOUSING (WHITE) RKA0072-KJ LEG RUBBER...