hit counter script
Panasonic KX-TG2360JXS Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Answering Machine
  5. KX-TG2360JXS
  6. Service manual

Panasonic KX-TG2360JXS Service Manual

Digital cordless answering system silver version for asia, middle near east and other areas
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Telephone Equipment
KX-TG2360JXS
KX-TGA236JXS
Digital Cordless Answering System
Silver Version
(for Asia, Middle Near East and Other Areas)
© 2004 Panasonic Communications Co., Ltd. All
rights
reserved.
distribution is a violation of law.
ORDER NO. KM40402342C3
Unauthorized
copying
and

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TG2360JXS

Summary of Contents for Panasonic KX-TG2360JXS

  • Page 1 ORDER NO. KM40402342C3 Telephone Equipment KX-TG2360JXS KX-TGA236JXS Digital Cordless Answering System Silver Version (for Asia, Middle Near East and Other Areas) © 2004 Panasonic Communications Co., Ltd. All rights reserved. Unauthorized copying distribution is a violation of law.

  • Page 2: Table Of Contents

    KX-TG2360JXS / KX-TGA236JXS Note: Because CONTENTS 2 to 9 are the extracts from the Operating Instructions of this model, they are subject to change without notice. Please refer to the original Operating Instructions for further information. CONTENTS Page Page 1 ABOUT LEAD FREE SOLDER (PbF: Pb free) 11 ASSEMBLY INSTRUCTIONS 1.1.
  • Page 3 KX-TG2360JXS / KX-TGA236JXS 17.3. Power Supply Circuit 24.3. Removing Solder from Between Pins 17.4. Reset Circuit 25 CABINET AND ELECTRICAL PARTS (Base Unit) 17.5. Locator/Intercom Mode 26 CABINET AND ELECTRICAL PARTS (Handset) 17.6. Telephone Line Interface 27 ACCESSORIES AND PACKING MATERIALS 17.7.

  • Page 4: About Lead Free Solder (Pbf: Pb Free)

    KX-TG2360JXS / KX-TGA236JXS 1 ABOUT LEAD FREE SOLDER (PbF: Pb free) Note: In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that contains lead. We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn), Silver (Ag), and Copper (Cu).

  • Page 5: How To Recognize That Pb Free Solder Is Used

    KX-TG2360JXS / KX-TGA236JXS 1.2. How to recognize that Pb Free solder is used 1.2.1. Base Unit PCB IC300 IC201 IC901 IC601 Marked (Component View) Marked (Flow Solder Side View) Note: The location of the “PbF” mark is subject to change without notice.
  • Page 6 KX-TG2360JXS / KX-TGA236JXS 1.2.2. Handset PCB IC204 IC201 IC901 IC202 IC203 Marked (Component View) Note: The location of the “PbF” mark is subject to change without notice.

  • Page 7: For Service Technicians

    KX-TG2360JXS / KX-TGA236JXS 2 FOR SERVICE TECHNICIANS ICs and LSIs are vulnerable to static electricity. When repairing, the following precautions will help prevent recurring malfunctions. 1. Cover the plastic parts boxes with aluminum foil. 2. Ground the soldering irons. 3. Use a conductive mat on the worktable.

  • Page 8: Battery

    KX-TG2360JXS / KX-TGA236JXS 4 BATTERY 4.1. Standard Battery Life 4.1.1. Battery Charge 4.1.2. Battery Strength 4.1.3. Recharge Note for service: The battery strength may not be indicated correctly if the battery is disconnected and connected again, even after it is fully...

  • Page 9: Battery Replacement

    KX-TG2360JXS / KX-TGA236JXS 4.1.4. Battery Information 4.2. Battery Replacement...

  • Page 10: Location Of Controls

    KX-TG2360JXS / KX-TGA236JXS 5 LOCATION OF CONTROLS 5.1. Base unit...

  • Page 11: Handset

    KX-TG2360JXS / KX-TGA236JXS 5.2. Handset...

  • Page 12: Display

    KX-TG2360JXS / KX-TGA236JXS 6 DISPLAY 6.1. Base Unit Display...

  • Page 13: Troubleshooting (Handset Lcd)

    KX-TG2360JXS / KX-TGA236JXS 6.2. Troubleshooting (Handset LCD) The following will be displayed when the unit needs your attention. Cross Reference: Erasing an Item in the Phone Book (P.35)

  • Page 14: Settings

    KX-TG2360JXS / KX-TGA236JXS 7 SETTINGS 7.1. Connections 7.2. Connecting an Optional Headset...

  • Page 15: Function Menu Table

    KX-TG2360JXS / KX-TGA236JXS 7.3. Function Menu Table Cross Reference: Direct Commands (P.20)

  • Page 16: Date And Time

    KX-TG2360JXS / KX-TGA236JXS 7.4. Date and Time...

  • Page 17: Dialing Mode

    KX-TG2360JXS / KX-TGA236JXS 7.5. Dialing Mode 7.6. Line Mode...

  • Page 18: Voice Enhancer Technology

    KX-TG2360JXS / KX-TGA236JXS 7.7. Voice Enhancer Technology...

  • Page 19: Ringer Tone

    KX-TG2360JXS / KX-TGA236JXS 7.8. Ringer Tone...

  • Page 20: Direct Commands

    KX-TG2360JXS / KX-TGA236JXS 7.9. Direct Commands...

  • Page 21: Operation

    KX-TG2360JXS / KX-TGA236JXS 8 OPERATION 8.1. Answering System 8.1.1. Greeting Message...
  • Page 22 KX-TG2360JXS / KX-TGA236JXS 8.1.2. Caller’s Recording Time...
  • Page 23 KX-TG2360JXS / KX-TGA236JXS 8.1.3. Message Alert...
  • Page 24 KX-TG2360JXS / KX-TGA236JXS 8.1.4. Erasing Messages...

  • Page 25: For Call Waiting Service Users

    KX-TG2360JXS / KX-TGA236JXS 8.2. For Call Waiting Service Users 8.3. Using the PAUSE Key...

  • Page 26: Dial Lock

    KX-TG2360JXS / KX-TGA236JXS 8.4. Dial Lock...

  • Page 27: Flash Button

    KX-TG2360JXS / KX-TGA236JXS 8.5. FLASH Button...

  • Page 28: Remote Operation From A Touch Tone Phone

    KX-TG2360JXS / KX-TGA236JXS 8.6. Remote Operation from a Touch Tone Phone 8.6.1. Remote Code...
  • Page 29 KX-TG2360JXS / KX-TGA236JXS 8.6.2. Voice Menu...
  • Page 30 KX-TG2360JXS / KX-TGA236JXS 8.6.3. Direct Remote Operation...

  • Page 31: Phone Book

    KX-TG2360JXS / KX-TGA236JXS 8.7. Phone Book 8.7.1. Storing Names And Numbers Cross Reference: Chain Dial (P.34)
  • Page 32 KX-TG2360JXS / KX-TGA236JXS...
  • Page 33 KX-TG2360JXS / KX-TGA236JXS 8.7.2. Dialing from the Phone Book...
  • Page 34 KX-TG2360JXS / KX-TGA236JXS 8.7.3. Chain Dial...
  • Page 35 KX-TG2360JXS / KX-TGA236JXS 8.7.4. Editing an Item in the Phone Book Cross Reference: Dialing from the Phone Book (P.33) 8.7.5. Erasing an Item in the Phone Book Cross Reference: Dialing from the Phone Book (P.33)

  • Page 36: Troubleshooting

    KX-TG2360JXS / KX-TGA236JXS 9 TROUBLESHOOTING Cross Reference: (*1) Re-registering a Handset (P.49) (*2) Battery Charge (P.8) (*3) Dial Lock (P.26)
  • Page 37 KX-TG2360JXS / KX-TGA236JXS Cross Reference: (*4) Dial Lock (P.26) (*5) Message Alert (P.23) (*6) Connecting an Optional Headset (P.14)
  • Page 38 KX-TG2360JXS / KX-TGA236JXS Cross Reference: (*7) Caller’s Recording Time (P.22) (*8) Erasing Messages (P.24) (*9) Remote Code (P.28) (*10) “To turn on the Answering System” in Direct Remote Operation (P.30) (*11) Date and Time (P.16)
  • Page 39 KX-TG2360JXS / KX-TGA236JXS Cross Reference: (*12) BATTERY (P.8) (*13) Connections (P.14) (*14) Dialing Mode (P.17) (*15) Battery Charge (P.8) (*16) Recharge (P.8) (*17) Battery Replacement (P.9) (*18) Date and Time (P.16)

  • Page 40: Disassembly Instructions

    KX-TG2360JXS / KX-TGA236JXS 10 DISASSEMBLY INSTRUCTIONS 10.1. Base Unit Shown in Fig.- To Remove Remove Lower Cabinet Screws (2.6 × 14)..(A) × 5 Main P.C. Board Tape and Solder Screws (2.6 × 8)...(B) × 8...

  • Page 41: Handset

    KX-TG2360JXS / KX-TGA236JXS 10.2. Handset Shown in Fig.- To Remove Remove Rear Cabinet Screws (2.6 × 12)..(C) × 2 Follow the procedure. Main P.C. Board Tape and Solder Screw (2.6 × 12)..(D) × 1 Screws (2.6 × 9)..(E) × 2...

  • Page 42: Assembly Instructions

    KX-TG2360JXS / KX-TGA236JXS 11 ASSEMBLY INSTRUCTIONS 11.1. Fix the LCD to P.C. Board (Handset)

  • Page 43: Troubleshooting Guide

    KX-TG2360JXS / KX-TGA236JXS 12 TROUBLESHOOTING GUIDE Cross Reference: Note: Check Power (P.44) (*1) When a user claims that the unit disconnects a call right after the greeting message and no incoming messages can Error Message Table (P.44) be recorded, this symptom can not be reappeared with TEL Check Playback (P.46)

  • Page 44: Check Power

    KX-TG2360JXS / KX-TGA236JXS 12.1. Check Power Cross Reference: Note: Power Supply Circuit (P.73) DSP is IC501. Reset Circuit (P.75) 12.2. Error Message Table Display Symptom Remedy The initialization was tried, but it could not be done. 1. Check the peripheral circuit of Flash Memory visually.

  • Page 45: Check Record

    KX-TG2360JXS / KX-TGA236JXS 12.3. Check Record BASE UNIT a) Not record Greeting Message b) Not record Incoming Message c) How to change the Auto Disconnect activation (time) Some Telephone Company lines (fiber or cable) ON Hook and OFF Hook voltages are lower than conventional lines, which may cause a malfunction of Auto Disconnect detection.To solve this problem, try changing the Auto Disconnect activation (time)

  • Page 46: Check Playback

    KX-TG2360JXS / KX-TGA236JXS 12.4. Check Playback Cross Reference: Note: Power Supply Circuit (P.73) Flash Memory is IC701. DSP is IC501. 12.5. Check Sp-phone Transmission Cross Reference: Note: Telephone Line Interface (P.76) Flash Memory is IC701. SIGNAL ROUTE (P.85) DSP is IC501.

  • Page 47: Check Sp-Phone Reception

    KX-TG2360JXS / KX-TGA236JXS 12.6. Check Sp-phone Reception Cross Reference: Note: Telephone Line Interface (P.76) Flash Memory is IC701. SIGNAL ROUTE (P.85) DSP is IC501. 12.7. Check Battery Charge Note: DSP is IC501.

  • Page 48: Check Link

    KX-TG2360JXS / KX-TGA236JXS 12.8. Check Link (*1) Refer to Finding Out the Defective Part (P.49). Cross Reference: RF Check Flowchart (P.50)

  • Page 49: Check The Rf Part

    KX-TG2360JXS / KX-TGA236JXS 12.9. Check the RF Part 12.9.1. Finding Out the Defective Part After All the Checkings or Repairing Re-register Handset (to be checked) to Base Unit (to be checked) and HS to BU Regular unit (working). 12.9.1.1. Re-registering a Handset...
  • Page 50 KX-TG2360JXS / KX-TGA236JXS 12.9.2. RF Check Flowchart Each item (1a ~5) of RF Check Flowchart corresponds to Check Table for RF part. Please refer to the each item. Cross Reference: Check Table for RF part (P.51)
  • Page 51 KX-TG2360JXS / KX-TGA236JXS 12.9.3. Check Table for RF part Item BU checking HS checking 1a Link confirmation Normal 1. Re-resister HS Regular Unit (working) to BU. 1. Re-resister HS to BU of Regular Unit (working). 2. Press [Talk] key of the HS Regular Unit to 2.
  • Page 52 KX-TG2360JXS / KX-TGA236JXS 12.9.4. RF-DSP interface signal wave form...

  • Page 53: Check Handset Transmission

    KX-TG2360JXS / KX-TGA236JXS 12.10. Check Handset Transmission Cross Reference: SIGNAL ROUTE (P.85). 12.11. Check Handset Reception Cross Reference: SIGNAL ROUTE (P.85). Note: When checking the RF UNIT, Refer to Check the RF Part (P.49) 12.12. Check Caller ID Cross Reference: Telephone Line Interface (P.76).

  • Page 54: Test Mode

    KX-TG2360JXS / KX-TGA236JXS 13 TEST MODE 13.1. Test Mode Flow Chart for Base Unit 13.1.1. TX Burst Mode and Adjust X’tal Mode...
  • Page 55 KX-TG2360JXS / KX-TGA236JXS 13.1.2. RX-CW TEST Mode...
  • Page 56 KX-TG2360JXS / KX-TGA236JXS 13.1.3. Test Link Mode Note: (*1) for factory use only.

  • Page 57: Test Mode Flow Chart For Handset

    KX-TG2360JXS / KX-TGA236JXS 13.2. Test Mode Flow Chart for Handset 13.2.1. TX Burst Mode...
  • Page 58 KX-TG2360JXS / KX-TGA236JXS 13.2.2. RX-CW TEST Mode...
  • Page 59 KX-TG2360JXS / KX-TGA236JXS 13.2.3. Test Link Mode Note: (*1) LCD displays the Channel number. (exception: default/ CH00 = 1ch.) (*2) for factory use only.
  • Page 60 KX-TG2360JXS / KX-TGA236JXS 13.2.4. Adjustment flow (X’tal mode and Batt Low Mode) Cross Reference (*1) Adjustment Battery Low Detector Voltage (Handset) (P.61) Note: (*2) These are the default values. (*3) These values may not be fixed depending on the battery strength.

  • Page 61: X801 (Base Unit), X201 (Handset) Check

    KX-TG2360JXS / KX-TGA236JXS 13.3. X801 (Base Unit), X201 (Handset) Check Equipment: Frequency counter Check Point for measurement: BCK Checking tolerance: 13.824MHz ± 100Hz 13.3.1. Check and Adjustment X801 (Base Unit) Frequency 1. Set up Base Unit in TEST mode. 2. Press following keys in order to Adjust Crystal mode. [LOCATOR], [LOCATOR], [LOCATOR], [ ] or [ ], [ ], [ ] * Check BCK frequency.

  • Page 62: Base Unit Reference Drawing

    13.5. Base Unit Reference Drawing When connecting the Simulator and Equipments for checking, please refer to the illustration below. 13.5.1. Component View FREQUENCY COUNTER (*1) RSSI RA703 RA704 Q201 C311 IC300 C942 IC201 C308 Q202 C307 Q354 D301 RSSI IC901 C317 C981 L301...
  • Page 63 13.5.2. Flow Solder Side View AF OSC AF OSC OSCILLOSCOPE AF VOLT METER LOOP SIMULATOR LED722 Ring BELL SIMULATOR Call_ID LED720 SIMULATOR DCM2 DC VOLT MICP1 LED723 METER MICM1 R352 R355 R356 DCP2 R353 R351 TXD2 LED721 D306 C304 R571 C309 C301 C570...

  • Page 64: Handset Reference Drawing

    13.6. Handset Reference Drawing When connecting the Simulator and Equipments for checking, please refer to the illustration below. AC VOLT METER FREQUENCY MIC_M OSCILLOSCOPE COUNTER (*1) 1.1kHz RSSI MIC_P MIC LOAD L205 D212 D218 RSSI L207 X201 RECEIVER D217 Q207 RA201 CHG1 VSS2...

  • Page 65: Frequency Table

    KX-TG2360JXS / KX-TGA236JXS 13.7. FREQUENCY TABLE Channel TX/RX Frequency TEST MODE Frequency Channel TX/RX Frequency TEST MODE Frequency (MHz) (MHz) (MHz) (MHz) 2400.914355 2400.724512 2457.994043 2457.804199 2401.808203 2401.618359 2458.887891 2458.698047 2402.698096 2402.508252 2459.777783 2459.587939 2403.591943 2403.402100 2460.671631 2460.481787 2404.481836 2404.291992 2461.561523...

  • Page 66: How To Clear User Setting

    KX-TG2360JXS / KX-TGA236JXS 13.8. How to Clear User Setting The operation reset the unit to Factory setting. (Erase recording Voice messages, Stored phone numbers, Caller list and etc.) This operation should not be performed for a usual repair. 13.8.1. Base unit 13.8.2.

  • Page 67: Description

    KX-TG2360JXS / KX-TGA236JXS 14 DESCRIPTION 14.1. Frequency The frequency range of 2400MHz~2480MHz is used. Transmitting and receiving channel between base unit and handset is same frequency. Refer to the Frequency Table. 14.2. FHSS (Frequency Hopping Spread Spectrum) This telephone is using an IC chip which has similar specification to WDCT (World Digital Cordless Telephone) and is the cordless telephone system that can use multiple portable unit simultaneously.
  • Page 68 KX-TG2360JXS / KX-TGA236JXS 14.2.1. TDD Frame Format 14.2.2. TDMA system This system is the cycles of 10ms, and has four duplex paths, so it is possible to perform four duplex communications simultaneously. In 1 slot 1.25ms, the 10ms of voice data is transmitted.

  • Page 69: Signal Flowchart In The Whole System

    KX-TG2360JXS / KX-TGA236JXS 14.3. Signal Flowchart in the Whole System Reception CN101 of the base unit is connected to the TEL line, and signal is entered through the bridge diode D101. While talking, the relay (Q104) is turned ON and amplified at the Q150, then led to DSP (IC501). The DSP encodes ADPCM and TDD/TDMA with FHSS to TX-DATA.

  • Page 70: Explanation Of Link Data Communication

    KX-TG2360JXS / KX-TGA236JXS 15 EXPLANATION OF LINK DATA COMMUNICATION 15.1. Calling 15.2. To Terminate Communication 15.3. Ringing...

  • Page 71: Block Diagram (Base Unit)

    DATA IC300 IC301, Q301, D303 VCCR RX_EN TX_EN 3.3V 4.0V VCCA SCHTRL REGULATOR CONVERTOR RSSI VCCPA VBATT2 IC601 2.5V REGULATORS CHARGE_CONTACT Q381 Q382 IC701 INT 1 CHARGE FLASH DETECT MEMORY Q350, Q351, Q354 CHARGE CONTROL KX-TG2360JXS BLOCK DIAGRAM (Base Unit)

  • Page 72: Circuit Operation (Base Unit)

    KX-TG2360JXS / KX-TGA236JXS 17 CIRCUIT OPERATION (Base Unit) General Description: (DSP, Flash Memory) is a digital speech/signal processing system that implements all the functions of speech compression, record and playback, and memory management required in a digital telephone answering machine.

  • Page 73: Flash Memory (Ic701)

    KX-TG2360JXS / KX-TGA236JXS 17.1.2. The Meaning of the Motion of Pin 128 · The period of Host Power Up (Hardware Initialization) In this period, the host sets up some registers in order to wake up the system. · The period of Host Reset (Software Initialization) In this period, the host reads the parameter from the memory and initializes module.
  • Page 74 KX-TG2360JXS / KX-TGA236JXS 17.3.1. Charge Circuit The voltage from the AC is supplied to the charge circuits. Normal charge of maximum 6-hours is started soon after the Handset is placed on the base unit. Then it changes to Trickle charge to prevent from overcharging.

  • Page 75: Reset Circuit

    KX-TG2360JXS / KX-TGA236JXS 17.4. Reset Circuit Function: This circuit is used to initialize the microcomputer when it incorporates an AC adaptor. Circuit Operation: When the AC Adaptor is inserted into the unit, then the voltage is shifted by IC300 and power is supplied to the DSP.

  • Page 76: Locator/Intercom Mode

    KX-TG2360JXS / KX-TGA236JXS 17.5. Locator/Intercom Mode 1. Press the base LOCATOR/INTERCOM button, then a beep is output from pins 35 and 37 of IC501, and blinks on the SP- PHONE LED (LED 721) is caused by pin 15 of IC501.

  • Page 77: Auto Disconnect Circuit

    KX-TG2360JXS / KX-TGA236JXS 17.7. Auto Disconnect Circuit Function: This circuit is used to detect the fact that another telephone connected to the same line is OFF-HOOK while the unit is in a receiving status or OGM transmitting status. Circuit Operation: The voltage of pin50 of IC501 is monitored.

  • Page 78: Parallel Connection Detect Circuit

    KX-TG2360JXS / KX-TGA236JXS 17.8. Parallel Connection Detect Circuit Function: In order to disable call waiting and stutter tone functions when using telephones connected in parallel, it is necessary to have a circuit that judges whether a telephone connected in parallel is in use or not. This circuit determines whether the telephone connected in parallel is on hook or off hook by detecting changes in the T/R voltage.

  • Page 79: Calling Line Identification (Caller Id)

    KX-TG2360JXS / KX-TGA236JXS 17.9. Calling Line Identification (Caller ID) Function: The caller ID is a chargeable ID which the user of a telephone circuit obtains by entering a contract with the telephone company to utilize a caller ID service. For this reason, the operation of this circuit assumes that a caller ID service contract has been entered for the circuit being used.

  • Page 80: Block Diagram (Handset)

    KX-TG2360JXS / KX-TGA236JXS 18 BLOCK DIAGRAM (Handset) IC202 D213 MOD_EN RXGAIN RSTN D207 D208 IC205 D205 D206 IC203 VBATT2 3.0V IC201 HSMIP HSMIN INT_1 INT 1 IC204 2.5V KX-TGA236JXS BLOCK DIAGRAM (Handset)

  • Page 81: Circuit Operation (Handset)

    KX-TG2360JXS / KX-TGA236JXS 19 CIRCUIT OPERATION (Handset) 19.1. Construction The circuit mainly consists of DSP and RF unit as shown in the block diagram. 19.1.1. DSP:IC201 19.1.1.1. Function · Battery Low, Power down defect circuit · Ringer Generation · Interface circuit RF unit, speaker, mic, LED, Key scan, LCD, Headset 19.1.1.2.

  • Page 82: Power Supply Circuit

    KX-TG2360JXS / KX-TGA236JXS 19.2. Power Supply Circuit Voltage is supplied separately to each block. Block Diagram (Handset Power) KEY, BACK +3.6V BATTERY LIGHT BATT+ +3.6V BATT- LEDS Q207 +3.0V REG +3.0V IC203 IC201 D213 CHARGE1 EEPROM IC202 D207 D208 Q212...

  • Page 83: Charge Circuit

    KX-TG2360JXS / KX-TGA236JXS 19.3. Charge Circuit When the handset is put on the cradle of the Base unit or the optional charger, the power is supplied from CHARGE2 and CHARGE1 terminals to charge the battery via D205 (D207), R268, Q212. The voltage between CHARGE2 and CHARGE1 flows D213 ->...

  • Page 84: Sending Signal

    KX-TG2360JXS / KX-TGA236JXS 19.5. Sending Signal The voice signal from the microphone input to DSP (42-43). CN203 is the headset jack. When the headphone is connected, the Q206 detect it. The input from the microphone of the handset (MIN, MIP) is cut and the microphone signal from the headset is input to DSP (39).

  • Page 85: Signal Route

    KX-TG2360JXS / KX-TGA236JXS 20 SIGNAL ROUTE Each signal route is as follows.

  • Page 86: Cpu Data (Base Unit)

    KX-TG2360JXS / KX-TGA236JXS 21 CPU DATA (Base Unit) 21.1. IC501 Description High High_Z Description High High_Z INT0 63 TXMOD 64 VREFR L1_BELL 65 RSSI L1_RLY Off Hook On Hook 66 VCCR AC_DOWN_DET High 67 GNDPLL KEY_STB_F Active 68 VCCPLL KEY_STB_E...

  • Page 87: Cpu Data (Handset)

    KX-TG2360JXS / KX-TGA236JXS Note: Description High High_Z 125 VCC · The mark “*” in the I/O column means the port is 126 NC controlled by the firmware. 127 FLASH_SCK High Middle · Data in the blank columns are omitted because of the...

  • Page 88: Explanation Of Ic Terminals (Rf Unit)

    KX-TG2360JXS / KX-TGA236JXS 23 EXPLANATION OF IC TERMINALS (RF Unit) 23.1. IC901...

  • Page 89: How To Replace Aflat Package Ic

    KX-TG2360JXS / KX-TGA236JXS 24.3. Removing Solder from 24 HOW TO REPLACE A Between Pins FLAT PACKAGE IC 1. Add a small amount of solder to the bridged pins. 24.1. Preparation 2. With a hot iron, use a sweeping motion along the flat part of the pin to draw the solder from between the adjacent pads.

  • Page 90: Cabinet And Electrical Parts (Base Unit)

    KX-TG2360JXS / KX-TGA236JXS 25 CABINET AND ELECTRICAL PARTS (Base Unit)

  • Page 91: Cabinet And Electrical Parts (Handset)

    KX-TG2360JXS / KX-TGA236JXS 26 CABINET AND ELECTRICAL PARTS (Handset)

  • Page 92: Accessories And Packing Materials

    KX-TG2360JXS / KX-TGA236JXS 27 ACCESSORIES AND PACKING MATERIALS...

  • Page 93: Terminal Guide Of The Ic S, Transistors And Diodes

    KX-TG2360JXS / KX-TGA236JXS 28 TERMINAL GUIDE OF THE IC´S, TRANSISTORS AND DIODES 28.1. Base Unit 28.2. Handset...

  • Page 94: Replacement Parts List

    KX-TG2360JXS / KX-TGA236JXS 29 REPLACEMENT PARTS Ref. Part No. Part Name & Description Remarks PQAS5P13Y SPEAKER LIST PQBC10404Z1 BUTTON, MESSAGE AS-HB PQHR11030Z GUIDE, LED ABS-HB Note: PQSA10098U ANTENNA PQSX10258Z KEYBOARD SWITCH, TAM 1. RTL (Retention Time Limited) PQSX10261V KEYBOARD SWITCH, DIAL...
  • Page 95 KX-TG2360JXS / KX-TGA236JXS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks L901 MQLRE18NJF COIL R543 ERJ2GEJ472X 4.7K L903 MQLRF4N7DF2 COIL R570 ERJ2GEJ473 L904 MQLRE22NJF COIL R571 ERJ3GEYJ123 L905 MQLRF10NJF COIL R572 ERJ3GEYJ102...

  • Page 96: Handset

    KX-TG2360JXS / KX-TGA236JXS Ref. Part No. Part Name & Description Remarks 29.2. Handset C511 ECUE1A104KBQ 29.2.1. Cabinet and Electrical Parts C512 ECUE1A104KBQ C553 ECUE1A104KBQ Ref. Part No. Part Name & Description Remarks C554 ECUE1A104KBQ C560 ECST0JY106 PQGG10254Z1 GRILLE, LCD C591...
  • Page 97 KX-TG2360JXS / KX-TGA236JXS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks D217 MA8047 DIODE(SI) R268 ERJ3GEYJ102 D218 MA8047 DIODE(SI) R269 ERJ3GEYJ102 D219 MA8047 DIODE(SI) R270 ERJ3GEYJ102 D220 MA8047 DIODE(SI) R275 ERJ2GEJ104 100K...

  • Page 98: Accessories And Packing Materials

    KX-TG2360JXS / KX-TGA236JXS Ref. Part No. Part Name & Description Remarks C311 ECUE1H3R0CCQ C312 ECUE1A104KBQ C901 ECUE1H100DCQ C903 ECUE1H100DCQ C904 ECUE1H010CCQ C910 ECUE1H010CCQ C911 ECUE1H100DCQ C915 ECUE1H100DCQ C917 ECUE1H100DCQ C918 ECUE1H100DCQ C921 ECUE1H100DCQ C922 ECUE1H100DCQ C937 ECUE1H471KBQ 470P C938 ECUE1H100DCQ...

  • Page 99: For Schematic Diagram

    KX-TG2360JXS / KX-TGA236JXS 30 FOR SCHEMATIC DIAGRAM 30.1. Base Unit (SCHEMATIC DIAGRAM (Base Unit)) Notes: 1. DC voltage measurements are taken with voltmeter from the negative voltage line. 2. This schematic diagram may be modified at any time with the development of new technology.

  • Page 100: Schematic Diagram (Base Unit)

    KX-TG2360JXS / KX-TGA236JXS 31 SCHEMATIC DIAGRAM (Base Unit) RF UNIT I/F PAD IC601 2.5V REG 2.5V VOUT C618 Cont K470P C763 RADIO_EN C774 C778 C773 C772 C770 C771 C769 R807 C768 C767 C762 C761 RSSI1 TXD2 C812 R805 K0.1 Q800...
  • Page 101 680p(3216) (10) RX T/R (11) C120 NC C111 K680P R114 390K -20dBm IN (12) DCIN0 C121 NC R115 390K C112 K680P (13) (14) TX T/R -16.5dBm OUT Q106 (15) (16) BELL (17) NC: No Components KX-TG2360JXS SCHEMATIC DIAGRAM (Base Unit)

  • Page 102: Schematic Diagram (Handset)

    KX-TG2360JXS / KX-TGA236JXS 32 SCHEMATIC DIAGRAM (Handset) -16.5dBm OUT CN203 L206 C225 6V22 R232 HEADSET-DET Q206 MIC2 MIC1 L204 TP_ANT L205 -45dBm IN HEADSET-JACK HANDSET SP R226 RSSI TX_DATA R227 OSC_IN R321 (10) (11) RA201 MOD_EN C324 C321 IC206 4.7K...
  • Page 103 KX-TG2360JXS / KX-TGA236JXS RSSI C312 K0.1 L202 NC R276 560 R286 Q204 L203 NC 3.0V X201 13.824MHz R295 NC (10) (11) R242 R241 (12) (13) R222 (14) (15) (16) CHARGE_DET C216 C303 (17) MICM 81 RF_RESET VCCPLL C214 K0.1 -45dBm...

  • Page 104: Schematic Diagram (Rf Part)

    K1000P(1608) SHCTRL TP_TESTP TESTN TC_CTRL FL901 C901 L909 C911 L903 C915 3.3nH TP_DEMOD SDIO 4.7nH D10P D10P D10P TP_TESTN C980 K0.01 RX_DATA R933 RF_RESET RSSI L990 1uH(1608) DMOD C992 J120P OSC_IN NC: No Components KX-TG2360JXS, KX-TGA236JXS SCHEMATIC DIAGRAM (RF Part)

  • Page 105: Circuit Board (Base Unit)

    C381 D381 C161 L402 C709 C109 C710 L376 L401 L377 R110 D101 D161 R125 C711 D102 D376 D377 D401 D402 SA104 C114 C712 C101 C102 WHITE YELLOW MICP MICM Intercom Mic Intercom Speaker KX-TG2360JXS CIRCUIT BOARD (Component View (Base Unit))

  • Page 106: Flow Solder Side View

    MICP1 LED723 MICM1 R352 R355 R356 R353 R351 TXD2 LED721 D306 C304 R571 C309 C301 C570 R303 R572 IC301 Q570 C303 Q301 D303 R301 R305 LED724 C302 R300 L302 C310 ANTG KX-TG2360JXS CIRCUIT BOARD (Flow Solder Side View (Base Unit))

  • Page 107: Circuit Board (Handset)

    35 CIRCUIT BOARD (Handset) 35.1. Component View BCK (13.824MHz) RSSI PDN RST MICM MICP C311 D213 R284 C312 L205 R254 C242 C309 D212 D218 R255 RSSI R286 R264 L207 R285 R246 R257 X201 C269 R256 R276 C306 RECEIVER L202 R248 R245 R241 C298...

  • Page 108: Flow Solder Side View

    35.2. Flow Solder Side View CA203 C210 LED207 LED204 R218 LED202 R217 R202 R204 RA207 LED206 R201 R203 LED201 LED203 LED205 C211 CA202 KX-TGA236JXS CIRCUIT BOARD (Flow Solder Side View (Handset))
  • Page 109 KX-TG2360JXS / KX-TGA236JXS I.N. KXTG2360JXS KXTGA236JXS...

This manual is also suitable for:

Kx-tga236jxsKx-tg2360jx

Table of Contents