Table of Contents
Advertisement
12.1.3. How to Install the IC
1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins.
*Check the accuracy of the IC setting with the corresponding soldering foil.
2. Apply flux to all pins of the FLAT PACKAGE IC.
3. Solder the pins, sliding the soldering iron in the direction of the arrow.
12.1.4. How to Remove a Solder Bridge
1. Lightly resolder the bridged portion.
2. Remove the remaining solder along the pins using a soldering iron as shown in the figure below.
KX-TG2511AL/KX-TG2512AL/KX-TG2513AL/KX-TGA250AZ
59
Advertisement
Table of Contents
Troubleshooting
