hit counter script
Panasonic PT-53TW53G Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Projection TV
  5. PT53TW53G - 53" PROJECTION TV HD
  6. Service manual
Panasonic PT-53TW53G Service Manual

Panasonic PT-53TW53G Service Manual

Hdtv monitor
Hide thumbs Also See for PT-53TW53G:
Table of Contents

Advertisement

Quick Links

Download this manual
MTNC030835A1
B19 Canada:B02
HDTV Monitor
PT-53TW53G / PT-56TW53G
P8
Please file and use this manual together with the service manual for
PT-53WX53G order number MTNC030518C1.
1

Advertisement

Table of Contents
loading

Related Manuals for Panasonic PT-53TW53G

Summary of Contents for Panasonic PT-53TW53G

  • Page 1 MTNC030835A1 B19 Canada:B02 HDTV Monitor PT-53TW53G / PT-56TW53G Please file and use this manual together with the service manual for PT-53WX53G order number MTNC030518C1.

  • Page 2: Safety Precautions

    1. Safety precautions General guidelines An isolation transformer should always be used during the servicing of a receiver whose chassis is not isolated from AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injuryfrom electrical shocks. It will also protect the receiver from being damaged by accidental shorting that may occur during servicing.
  • Page 3 Leakage current hot check Plug the AC cord directly into the AC outlet. Do not use an isolation transformer during the check. Connect a 1.5k 10 watt resistor in parallel with a 0.15 F capacitor between an exposed metallic part and ground. Use earth ground, for example a water pipe. Using a DVM with a 1000 ohms/volt sensitivity or higher, measure the AC potential across the resistor.

  • Page 4: About Lead Free Solder (Pbf)

    2. About lead free solder (PbF) NOTE Lead is listed as (Pb) in the periodic table of elements. / In the information below, Pb will refer to lead solder, and PbF will refer to Lead Free Solder. / The lead free solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).

  • Page 5: Important Safety Tests

    Suggested Pb free solder There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also beused. 3. Important safety tests Measuring H.V. The anode caps are cemented to the CRTs.
  • Page 6 Note: Reinsert the anode lead into the FBT distributor until it is tightly and fully seated. Turn the locking cap clockwise to lock in place. (EHT) Protector operation check With the cabinet back removed, apply a nominal 120V A.C. to the PTV. Over voltage test Preparation: 1.

  • Page 7: Service Notes

    2. Turn PTV ON. 3. Adjust the picture or brightness controls so that the DVM reads 12.4 ± 0.4 volts. 4. Increase the variable power supply until set turns off. The set should turn off at 12.4 ± 0.4 volts (DVM) and high voltage less than 36.4kV.
  • Page 8 2. Without pulling up, carefully twist the component with tweezers to break the adhesive. 3. Do not reuse removed leadless or chip components since they are subject to stress fracture during removal. Chip component installation 1. Put a small amount of solder on the board soldering pads. 2.
  • Page 9 3. Remove the solder from all the pads of the Flat IC by using a de solder braid 4. Position the new Flat IC in place (apply the pins of the Flat IC to the soldering pads where the pins need to be soldered). Properly determine the positions of the soldering pads and pins by correctly aligning the polarity symbol 5.
  • Page 10 IMPORTANT To protect against possible damage to the solid state devices due to arcing or static discharge, make certain that all ground wires are securely connected CAUTION The power supply circuit is above earth ground and the chassis cannot be polarized. Use an isolation transformer when servicing the receiver to avoid damage to the test equipment or to the chassis.
  • Page 11 6. Receiver feature table...
  • Page 12 FEATURE/MODEL PT-53TW53G / PT-56TW53G CHASSIS AP827 MICRO 256K MENU LANGUAGE ENG/SPAN/FR CLOSE CAPTION V-CHIP (USA/CANADA CHANNEL INFO BANNER VIDEO INPUT SKIP SKIP CHANNEL COUNT PIP (1T), 2T PIP (2T), 2T SPLIT 2T SPLIT REMOTE CONTROL (W/LIGHT) EUR7603Z90 CRT SUPPLIER MDDA (CENTAUR)

  • Page 13: Board Description Table

    7. Board description table BOARD PART NUMBER DESCRIPTION A-BOARD TNP2AH045AA MAIN CHASSIS D-BOARD TNP2AH046 POWER SUPPLY * DC-BOARD TNP2AA120 CONVERGENCE CIRCUIT * DV-BOARD TNP2AA114 DVI BOARD * DG-BOARD TNP2AA126 PIP PROCESSING, SPLIT, SEARCH, FORMATS LB-BOARD TNP2AA147 BLUE PRT LR-BOARD TNP2AA145 RED PRT LG-BOARD TNP2AA146...
  • Page 14 Speakers replacement 1. Remove the speaker grille. 2. Each speaker is secured to the cabinet with (4) screws. 3. Disconnect the R and L speaker lead connectors from the speaker units. Keyboard and front A/V inputs removal 1. Remove the speaker grille. 2.
  • Page 15 Front cabinet removal 1. Remove the speaker grille. 2. Remove the plastic frame by removing the screws around the lower speaker areas. 3. Remove the screws from the front cabinet located on the front bottom. 4. Remove all the screws from the back cabinet that holds the front cabinet (top and sides).
  • Page 16 4. Remove all the screws from the back cabinet that holds the front cabinet (top and sides). 5. Remove the back lower cover 6. Remove all the screws from the lower sides of theback cabinet. Mirror removal The mirror is attached inside the back cabinet cover. Carefully remove the cabinet cover to access its interior surface and remove the screws securing the brackets that hold the mirror at the top and sides to the mirror.
  • Page 17 Note: The Protective and lenticular screens are in one screen (Protective lenticular) Main chassis block 1. Remove the back lower cabinet cover. 2. The main chassis block is secured to the cabinet by screws at front, behind the Speaker Grill and inside on the bottom of the optical frame).
  • Page 18 8.1. Chassis assembly The chassis assembly shown in figure includes all the electrical and optical (light box) components Chassis front view A-Board 1. A-Board is secured to the chassis tray with five screws. 2. The A-Board is mated to the D-Board by four flexible connectors (male side of connectors): A1, A2, A3 &...
  • Page 19 D-Board 1. D-Board is secured to the chassis tray with five screws. 2. The D-Board is mated to the A-Board by four connectors (female side of connectors): D1, D2, D3 & D4. To remove this board, unplug the connectors on the A-Board pulling from the sides of each connector.
  • Page 20 NOTE: This board is non-serviceable. Except for JK002 (DVI AUDIO CONNECTOR) and JK002 (DVI CONNECTOR) / When removing this board pull carefully. DC-Board 1. Plugs onto the D-Board at the D21, D22 and D23 (DC1, DC2 and DC3 respectively) connectors. NOTE: This board is non-serviceable.
  • Page 21 To facilitate CRT replacement, the complete CRT mounting chassis does not need to be removed. 1. Remove the main chassis block from the cabinet. 2. Remove the optical bracket metal cover (rear side) by removing (6) screws from back, (2) screws from top, and (2) screws from each side.
  • Page 22 Focus pack location 8. Release CRT anode lead from CRT chassis wire clamp and all other wires from holders. 9. Loosen a screw that secures the DY and remove it from the CRT neck. Caution: To insure protection against x ray radiation, the lens must be mounted in place at all times when power is applied to the PTV CRT replacement 1.
  • Page 23 2. Lay CRT face down on a soft cloth. 3. Note position of yoke with centering tabs and remove from defective CRT. 4. Remove CRT DAG ground from defective CRT. Mount it on the replacement CRT exactly as it was on the defective CRT. Note: Replacement CRT is supplied with H.V.
  • Page 24 8.3. PTV screen assemblies Screen assemblies Note: The Protective and lenticular screens are in one screen (Protective lenticular) 8.4. Screen assemblies warning When storing or disposing of screen assemblies, be sure not to place them in direct sunlight. These screens may act as a magnifying glass and could cause a fire.
  • Page 25 9. Conductor views 9.1. K and G-Board printed circuit 10. Schematics 10.1. Schematic diagrams notes...
  • Page 27 10.2. Notas de los diagramas esquematicos...

  • Page 29: Parts Location

    10.3. A-Board schematic 1 of 5 10.4. A-Board schematic 2 of 5 10.5. A-Board schematic 3 of 5 10.6. A-Board schematic 4 of 5 10.7. A-Board schematic 5 of 5 11. Parts location 12. Parts list 12.1. Description of abbreviations guide...
  • Page 30 12.2. Parts list Ref. No. Part No. Part Name & Description Remarks CAPACITORS C001 ECA1CM470B CAP E 47UF/16V PT-53TW53G C002 TCJ2VC1H220J CAP C 22PF-J-50V C003 TCJ2VC1H220J CAP C 22PF-J-50V C004 F2A1H4R7A162 CAP E 4.7UF-50V C005 F2A1H2R2A162 CAP E 2.2UF-50V C006 ECA0JM332E CAP E 3300UF-6.3V...
  • Page 31 Ref. No. Part No. Part Name & Description Remarks C304 ECKW2H103PU8 CAP C .01UF-P-500V C305 F2A1H470A162 CAP E 47UF-50V C306 F2A2E100A025 CAP E 10UF-250V C307 ECKR1H103ZF5 CAP C .01UF-Z-50V C312 ECKC3D102KBN CAP C 1000PF-K-2KV C313 ECKR2H102KB5 CAP C 1000PF-K-500V C331 F2A1H470A162 CAP E 47UF-50V C332...
  • Page 33 Ref. No. Part No. Part Name & Description Remarks C522 ECWH20182JVY CAP P 1800PF-J-2KV C523 ECWH20182JVY CAP P 1800PF-J-2KV C524 ECQB1224JF3 CAP P .22UF-J-100V C525 ECEA1HN220UB CAP E 22UF/50V C526 F2A2E101A026 CAP E 100UF-250V C527 ECKR2H102KB5 CAP C 1000PF-K-500V C528 F2A1H470A162 CAP E 47UF-50V C531...
  • Page 34 Ref. No. Part No. Part Name & Description Remarks C843 ECA1VM222B CAP E 2200UF-35V C844 ECKR3A331KBP CAP C 330PF-K-1KVDC C845 ECA1VM222B CAP E 2200UF-35V C846 ECKR3A331KBP CAP C 330PF-K-1KVDC C848 F2A1C101A159 CAP E 100UF-16V C849 ECKR1H223ZF5 CAP C .022UF-Z-50V C851 ECQV1H104JL3 CAP P .10UF-J-50V C852...
  • Page 35 CAP C .1UF-Z-50V C1505 F2A1C101A159 CAP E 100UF-16V C1506 TCJ2VF1H103Z CAP C .01UF-Z-50V C1508 F2A1C101A159 CAP E 100UF-16V C1509 ECEA1HKA010B CAP E 1.0UF-50V PT-53TW53G C1509 ECJ2VF1C105Z CAP C 1.0UF-Z-16V PT-56TW53G C1510 TCJ2VF1H103Z CAP C .01UF-Z-50V C1511 TCJ2VC1H471J CAP C 470PF-J-50V C1513 ECEA1EN101UB...
  • Page 36 Ref. No. Part No. Part Name & Description Remarks C2330 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2331 F2A1H100A162 CAP E 10UF-50V C2332 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2333 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2334 TCJ2VF1H103Z CAP C .01UF-Z-50V C2335 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2337 ECA50YT2R2KB CAP E 2.2UF-50V C2338...
  • Page 37 TCJ2VB1H333K CAP C .033UF-K-50V C2456 TCJ2VB1H333K CAP C .033UF-K-50V C2457 TCJ2VB1H222K CAP C 2200PF-K-50V PT-56TW53G C2457 TCJ2VB1H472K CAP C 4700PF-K-50V PT-53TW53G C2458 TCJ2VB1H222K CAP C 2200PF-K-50V PT-56TW53G C2458 TCJ2VB1H472K CAP C 4700PF-K-50V PT-53TW53G C2459 ECJ2VB1C104K CAP C .1UF-K-16V PT-53TW53G C2459 ECJ2VB1C224K CAP C .22UF-K-16V PT-56TW53G...
  • Page 38 Ref. No. Part No. Part Name & Description Remarks C3038 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3039 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3040 ECJ2VF1C104Z CAP C .1UF-Z-16V C3043 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3044 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3045 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3046 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3047...
  • Page 39 Ref. No. Part No. Part Name & Description Remarks C3110 TCJ2VB1H102K CAP C 1000PF-K-50V C3111 TCJ2VB1H102K CAP C 1000PF-K-50V C3112 ECJ2VF1H104Z CAP C .1UF-Z-50V C3113 ECJ2VF1H104Z CAP C .1UF-Z-50V C3114 ECJ2VF1H104Z CAP C .1UF-Z-50V C3119 ECEA1CKA100B CAP E 10UF-16V C4335 ECJ2VF1H104Z CAP C .1UF-Z-50V C7001...
  • Page 40 Ref. No. Part No. Part Name & Description Remarks D372 MA2C18800E DIODE D407 MA3X152K0L DIODE D409 MA3X152K0L DIODE D410 MA3X152K0L DIODE D411 MA3X152K0L DIODE D451 B0EAKC000003 DIODE RECTIFIER D452 B0EAKC000003 DIODE RECTIFIER D453 B0EAKC000003 DIODE RECTIFIER D454 B0EAKC000003 DIODE RECTIFIER D455 B0EAKC000003 DIODE RECTIFIER...
  • Page 41 Ref. No. Part No. Part Name & Description Remarks D837 MA3X152K0L DIODE D870 B0JCME000025 DIODE D871 B0JCME000025 DIODE D876 B0JCME000025 DIODE D885 MA2062-BTP DIODE D886 MA2120-ATP DIODE D887 MA2062-BTP DIODE D895 MA2C165001VT DIODE D902 MA2C18800E DIODE D933 MA2C18800E DIODE D953 B0ZAZ0000047 DIODE D962...
  • Page 42 SI-8050J INT CKT IC872 SI-8090J INT CKT IC873 C0DAAZG00006 INT CKT IC880 AN78N12-LB INT CKT IC1101 TVR2AJ159S MPU EEPROM PT-53TW53G, PT-56TW53G IC1112 TVR2AJ158S CONVERGENCE EEPROM PT-53TW53G, PT-56TW53G IC1501 AN6562S-E1 INT CKT IC2201 AN5849S-E1V INT CKT IC2302 C1AA00000645 INT CKT IC2303...
  • Page 43 L305 EXCELSA39E FERRITE BEAD Ref. No. Part No. Part Name & Description Remarks L307 EXCELSA39V FERRITE BEAD L323 EXCELSA39V FERRITE BEAD L325 EXCELSA39E FERRITE BEAD L331 ELESN100JA COIL PEAKING 10UH L332 ELESN6R8JA COIL PEAKING 6.8UH L333 G0C560KA0021 COIL PEAKING 56UH L334 ELESN4R7KA COIL PEAKING 4.7UH...
  • Page 44 Ref. No. Part No. Part Name & Description Remarks L895 TALL08T220KA TRANSFORMER LINE FILTER L901 EXCELSA35T FERRITE BEAD L902 EXCELSA35T FERRITE BEAD L903 EXCELSA35T FERRITE BEAD L931 ELESN100JA COIL PEAKING 10UH L933 EXCELSA35T FERRITE BEAD L934 EXCELSA35T FERRITE BEAD L935 EXCELSA35T FERRITE BEAD L961...
  • Page 45 Ref. No. Part No. Part Name & Description Remarks Q373 2SC3942LB TRANSISTOR Q374 B1BAAN000025 TRANSISTOR Q375 B1BCAN000004 TRANSISTOR Q393 2SC3942LB TRANSISTOR Q394 B1BAAN000025 TRANSISTOR Q395 B1BCAN000004 TRANSISTOR Q406 2SD601ARTX TRANSISTOR Q501 B1CEML000001 TRANSISTOR Q502 2SK2847LBMAT TRANSISTOR Q503 2SD601ARTX TRANSISTOR Q509 2SC1473QR TRANSISTOR Q510...
  • Page 46 Ref. No. Part No. Part Name & Description Remarks Q1504 B1BAAV000003 TRANSISTOR Q1505 2SC3311ATA TRANSISTOR Q2301 2SB709ARTX TRANSISTOR Q2302 2SB709ARTX TRANSISTOR Q2304 2SD601ARTX TRANSISTOR Q2306 UN2215TX TRANSISTOR Q2307 2SB709ARTX TRANSISTOR Q2313 2SD601ARTX TRANSISTOR Q2314 2SD601ARTX TRANSISTOR Q2451 2SD601ARTX TRANSISTOR Q2452 2SD601ARTX TRANSISTOR Q2501...
  • Page 47 Ref. No. Part No. Part Name & Description Remarks R080 ERDS2TJ222T RES C 2.2K-J-1/4W R081 ERDS2TJ222T RES C 2.2K-J-1/4W R082 ERDS2TJ332T RES C 3.3K-J-1/4W R083 ERDS2TJ512T RES C 5.1K-J-1/4W R084 ERDS2TJ912T RES C 9.1K-J-1/4W R086 ERDS2TJ681T RES C 680-J-1/4W R087 ERDS2TJ331T RES C 330-J-1/4W R088...
  • Page 48 Ref. No. Part No. Part Name & Description Remarks R372 ER0S2THF82R0 RES M 82.0-F-1/4W R375 ERDS2TJ470T RES C 47-J-1/4W R376 ERG7ZJ272 RES M 2.7K-J-7W R379 ERDS2TJ563T RES C 56K-J-1/4W R380 ERDS2TJ821T RES C 820-J-1/4W R383 ERG12SJ101P RES M 100-J-1W R384 ERDS1FJ330P RES C 33-J-1/2W R385...
  • Page 49 Ref. No. Part No. Part Name & Description Remarks R522 ER0S2THF7151 RES M 7.15K-F-1/4W R523 ERDS2TJ275T RES C 2.7MEG-J-1/4W R525 ERJ6GEYJ272V RES M 2.7K-J-1/10W R534 ER0S2THF1203 RES M 12K-F-1/4W R535 ERDS2TJ222T RES C 2.2K-J-1/4W R536 ERDS2TJ101T RES C 100-J-1/4W R537 ERJ6GEYJ272V RES M 2.7K-J-1/10W R538...
  • Page 50 Ref. No. Part No. Part Name & Description Remarks R866 ERJ6GEYJ332V RES M 3.3K-J-1/10W R867 ERJ6GEYJ472V RES M 4.7K-J-1/10W R880 TSF39402 FUSE 4.0A/125V R881 TSF39402 FUSE 4.0A/125V R888 ERJ6GEYJ102V RES M 1K-J-1/10W R889 ERJ6ENF1581V RES M 158-F-1/10W R895 ERDS2TJ560T RES C 56-J-1/4W R901 ERDS2FJ122T RES C 1.2K-J-1/2W...
  • Page 51 Ref. No. Part No. Part Name & Description Remarks R959 ERDS2TJ471T RES C 470-J-1/4W R961 ERDS2FJ122T RES C 1.2K-J-1/2W R962 ERDS2TJ103T RES C 10K-J-1/4W R963 ERDS2TJ683T RES C 68K-J-1/4W R964 ERDS2TJ683T RES C 68K-J-1/4W R965 ERDS2TJ103T RES C 10K-J-1/4W R966 ERDS2TJ122T RES C 1.2K-J-1/4W R967...
  • Page 52 R2315 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2316 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2317 ERJ6GEYJ683V RES M 68K-J-1/10W R2318 ERJ6ENF4701V RES M 4.7K-F-1/10W PT-53TW53G R2318 ERJ6ENF5601V RES M 5.6K-F-1/10W PT-56TW53G R2320 ERJ12YJ101U RES M 100-J-1/2W R2321 ERJ6ENF5232V RES M 5.32K-F-1/10W PT-53TW53G R2321 ERJ6ENF5362V RES M 53.6K-F-1/10W PT-56TW53G...
  • Page 53 RES M 10K-J-1/10W R2350 ERJ6ENF1202V RES M 12K-F-1/10 R2351 ERJ6GEYJ473V RES M 47K-J-1/10W R2352 ERJ6GEYJ472V RES M 4.7K-J-1/10W R2353 ERJ6ENF4701V RES M 4.7K-F-1/10W PT-53TW53G R2353 ERJ6ENF5601V RES M 5.6K-F-1/10W PT-56TW53G R2354 ERJ6GEYJ103V RES M 10K-J-1/10W R2355 ERJ6GEYJ683V RES M 68K-J-1/10W R2356 ERJ6GEYJ223V...
  • Page 54 Ref. No. Part No. Part Name & Description Remarks R2538 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2539 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2541 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2542 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2543 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2568 ERJ6ENF6801V RES M 6.8K-F-1/10W R2569 ERJ6ENF8201V RES M 8.2K-F-1/10W R2570...
  • Page 55 Ref. No. Part No. Part Name & Description Remarks R3044 ERDS2TJ221T RES C 220-J-1/4W R3045 ERJ6ENF3600V RES M 360-F-1/10W R3046 ERDS2TJ221T RES C 220-J-1/4W R3047 ERJ6GEYJ184V RES M 180K-J-1/10W R3048 ERJ6GEYJ184V RES M 180K-J-1/10W R3049 ERJ6GEYJ561V RES M 560-J-1/10W R3050 ERJ6ENF3300V RES M 330-F-1/10W R3051...
  • Page 56 Ref. No. Part No. Part Name & Description Remarks R3116 ERJ6GEYJ102V RES M 1K-J-1/10W R3120 ERJ6GEYJ271V RES M 270-J-1/10W R3123 ERJ6GEYJ271V RES M 270-J-1/10W R3127 ERJ6GEYJ102V RES M 1K-J-1/10W R3128 ERJ6GEYJ102V RES M 1K-J-1/10W R3132 ERJ6GEYJ271V RES M 270-J-1/10W R3135 ERJ6GEYJ271V RES M 270-J-1/10W R3157...
  • Page 57 A/B LENS TKG2AA50121 MIRROR PT-53TW53G TKG2AA50131 MIRROR PT-56TW53G TMW2AX0041B MIRROR BRACKET SIDE TMW2AX0161 MIRROR BRACKET TOP TKG2AH50641 LENTICULAR AND PROTECTIVE SCREEN PT-53TW53G TKG2AH50651 LENTICULAR AND PROTECTIVE SCREEN PT-56TW53G TKG2AH50661 FRESNELSCREEN PT-56TW53G TKG2AH50631 FRESNEL SCREEN PT-53TW53G TKZ2AM50041C SCREEN BRACKET PT-56TW53G TKZ2A06011...
  • Page 58 M004 TBL2AH30071 CASTER Ref. No. Part No. Part Name & Description Remarks TKD2AX3121S INNER BARRIER BOARD PT-53TW53G EASG16P559A2 SPEAKER (WOOFER) EASG8P533A2 SPEAKER (MEDIUM) EASG5PH508A2 SPEAKER (TWEETER TKP2AA0792 SPEAKER GRILLE PT-53TW53G TKP2AA0872 SPEAKER GRILLE PT-56TW53G TBX2AA2701 BUTTON 7-KEY TKP2AA0801 LED PANEL...
  • Page 59 K-BOARD TNP2AA138 G-BOARD TNP2AA137 PT-53TW53G, PT-56TW53G...
  • Page 60 A-BOARD TNP2AH045AA PT-53TW53G, PT-56TW53G...
  • Page 61 A-BOARD TNP2AH045AA PT-53TW53G, PT-56TW53G...
  • Page 62 A-BOARD TNP2AH045AA PT-53TW53G, PT-56TW53G...
  • Page 63 A-BOARD TNP2AH045AA PT-53TW53G, PT-56TW53G...
  • Page 64 A-BOARD TNP2AH045AA PT-53TW53G, PT-56TW53G...
  • Page 65 Order No. MTNC030518C1 B19 Canada: B02 HDTV MONITOR PT-53WX53G / PT-56WX53G / PT-47WX53G / PT-47WX33G / PT- 47WXC43G / PT-4743G...
  • Page 66 A - BOARD - TNP2AH045 IC3002 IC3001 IC2302 IC2451 ..0.00 ..4.43 ..3.91 ..4.30 ..-22.42 ..4.46 .
  • Page 67 A - BOARD - TNP2AH045 Q031 Q931 Q932 Q933 Q934 Q945 Q2301 Q2302 Q2304 0.72 4.50 1.96 10.80 10.80 10.20 19.47 19.47 0.00 0.13 10.80 3.88 19.45 19.45 0.00 -0.12 0.00 19.47 0.00 3.88 1.30 10.20 10.18 10.80 13.40 13.40 0.00 Q2306 Q2307...
  • Page 68 D - BOARD - TNP2AH046 Q406 Q503 Q512 Q513 Q551 Q606 Q803 Q854 0.59 0.00 5.74 0.27 -0.22 0.00 20.28 138.60 0.00 11.16 11.92 5.75 -85.20 9.82 0.00 0.00 0.00 0.00 5.80 0.00 0.00 0.00 20.28 138.90 Q1503 Q1504 Q1505 Q7006 Q7007 Q7060...
  • Page 69 V OUT R3008 Q3011 A-BOARD R3003 V OUT1 Y-IN R3095 CV/SY Y/VOUT1 R3013 C-IN R3094 TNR001 SC/PB COUT1 TV1-V IC3001 A/V SWITCH R3010 R3112 Y-IN TNR002 CV/Y Y/VOUT2 TV2-V C-IN R3111 SC/PB COUT2 R3011 R3026 R3028 A/V 4 G-BOARD PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G VIDEO BLOCK DIAGRAM...
  • Page 70 YUV 1 YUV 2 Y-IN MAIN Y CV/SY/Y YOUT1 MAIN PB PBOUT1 C-IN SC/PB MAIN PR PROUT 1 IC3002 A/V SWITCH SUB Y Y-IN YOUT2 CV/Y SUB PB PBOUT2 C-IN SUB PR SC/PB PROUT2 DV-BOARD IC5102 MAIN CONVERTER CLOSED CAPTION RIN GIN BIN &...
  • Page 71 ANALOG Y VIN+ IC4507 DATA IN DATA OUT DIGITAL Y 5M FIFO 20-16 YUV 5-9 IC4506 10 Bit YUV 0-4 27-23 156,155,154,148,147, 153-149 136-132 138,137,131,130,129 FIN 0-4 FIN 5-9 YUV 0-9 51-60 141-13 FO 0-9 VIN3 Y IN/OUT Y IN/OUT YIN 0-9 38-47 154-14...
  • Page 72 IC4525 64MBit SDRAM ANALOG Y A0-A10 DQ0-DQ31 2,4,5,7,8,10,11,13,74,76,77,79 25,26,27,60,61 80,82,83,85,31,33,34,36,37,39 VIN+ 62,63,64,65,66 40,42,45,47,48,50,51,53,54,56 DIGITAL Y 20-16 YUV 5-9 DATA IN/OUT ADDRESS IC4506 10 Bit YUV 0-4 27-23 228-221 229,220,231 256-249 214-207 245-238 203-196 A0-A7 A8,A9,BS SD0-SD7 SD8-SD15 SD16-SD23SD24-SD31 -132 N 5-9 YUV 0-9 51-60 141-132...
  • Page 74 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G LR-BOARD TNP2AA145...
  • Page 76 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G LG-BOARD TNP2AA146...
  • Page 78 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G LB-BOARD TNP2AA147...
  • Page 79 4743G G-BOARD TNP2AA090AA K-BOARD TNP2AA089AA R-BOARD TNPA0615AB PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-...
  • Page 80 G-BOARD TNP2AA095 K-BOARD TNP2AA089 R-BOARD TNP2A0615 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G...
  • Page 81 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DV-BOARD TOP-VIEW TNP2AA114...
  • Page 82 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DV-BOARD TOP-VIEW TNP2AA114...
  • Page 83 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DV-BOARD TNP2AA114...
  • Page 84 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DV-BOARD TNP2AA114...
  • Page 85 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DV-BOARD TNP2AA114...
  • Page 86 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DV-BOARD BOTTOM-VIEW TNP2AA114...
  • Page 87 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DV-BOARD BOTTOM-VIEW TNP2AA114...
  • Page 88 VIEW PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TOP-VIEW TNP2AA126...
  • Page 89 VIEW PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TOP-VIEW TNP2AA126...
  • Page 90 VIEW PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TOP-VIEW TNP2AA126...
  • Page 91 VIEW PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TOP-VIEW TNP2AA126...
  • Page 92 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TNP2AA126...
  • Page 93 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TNP2AA126...
  • Page 94 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TNP2AA126...
  • Page 95 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TNP2AA126...
  • Page 96 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TNP2AA126...
  • Page 97 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD TNP2AA126...
  • Page 98 VIEW PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD BOTTOM-VIEW TNP2AA126...
  • Page 99 VIEW PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD BOTTOM-VIEW TNP2AA126...
  • Page 100 VIEW PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD BOTTOM-VIEW TNP2AA126...
  • Page 101 VIEW PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DG-BOARD BOTTOM-VIEW TNP2AA126...
  • Page 102 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DC-BOARD TOP-VIEW TNP2AA120...
  • Page 103 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DC-BOARD TOP-VIEW TNP2AA120...
  • Page 104 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DC-BOARD TNP2AA120...
  • Page 105 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DC-BOARD TNP2AA120...
  • Page 106 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DC-BOARD BOTTOM-VIEW TNP2AA120...
  • Page 107 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G DC-BOARD BOTTOM-VIEW TNP2AA120...
  • Page 108 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G D-BOARD TNP2AH046...
  • Page 109 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G D-BOARD TNP2AH046...
  • Page 110 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G D-BOARD TNP2AH046...
  • Page 111 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G D-BOARD TNP2AH046...
  • Page 112 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G D-BOARD TNP2AH046...
  • Page 113 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G D-BOARD TNP2AH046...
  • Page 114 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G D-BOARD TNP2AH046...
  • Page 115 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G A-BOARD TNP2AH045...
  • Page 116 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G A-BOARD TNP2AH045...
  • Page 117 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G A-BOARD TNP2AH045...
  • Page 118 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G A-BOARD TNP2AH045...
  • Page 119 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G A-BOARD TNP2AH045...
  • Page 120 PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G A-BOARD TNP2AH045...
  • Page 121 A/V 1 A/V 2 TNR001 AUDIO IN C3052 C3051 C3049 C3048 C3014 R3016 R3019 R3021 R3018 R3110 C2211 R3110 C3093 MPX IN C3032 R3014 R OUT 1 R OUT C3066 R3096 IC2201 L OUT 1 C3030 R3012 IC3001 L OUT R3114 C3104 A/V SWITCH...
  • Page 122 YUV 1 YUV 2 C3014 C3015 C3019 C3020 R3110 R3116 R3120 R3127 R3002 C2452 R2451 Q2452 R OUT 1 OUT B IC2451 SOUND IC3002 PROCESSOR A/V SWITCH R3001 C2451 R2452 L OUT 1 OUT A Q2451 R2333 R3100 R3099 R2324 C2330 R2325 C3101...
  • Page 123 AUDIO MUTE FROM MPU R2451 L2331 R2334 C2371 Q2452 IN R MUTE OUT R IC2302 AUDIO OUT R2335 C2375 R2452 L2332 IN L Q2451 OUT L R2333 R2338 C2330 R2325 IC2304 C2332 R2348 VAO MUTE FROM MPU AUDIO MUTE CIRCUIT AUDIO MUTE FROM MPU PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G AUDIO BLOCK DIAGRAM...
  • Page 124 A-Board TNP2AH045 2.74 Vp-p 6.32 Vp-p 5.60 Vp-p 5.84 Vp-p A15 PIN 9 (VM OUT) A15 PIN 6 (GREEN OUT) A15 PIN 4 (RED OUT) A15 PIN 2 (BLUE OUT) 3.88 Vp-p 3.52 Vp-p 1.15 Vp-p 2.52 Vp-p A3 PIN 11 (FBP TO CONV) A3 PIN 9 (VD TO CONV) A4 PIN 1 (V-SAW) A15 PIN 11 (S-ABL)
  • Page 125 D-Board TNP2AH046 0.65 Vp-p 1.6K Vp-p 14.8 Vp-p IC701 PIN 3 Q551-C Q551-B 13.0 Vp-p 3.56Vp-p IC701 PIN 7 IC701 PIN 6 LG-Board TNP2AA146 28.0 Vp-p TP22 (HEATER) PT-53WX53G PT-56WX53G PT-47WX53G PT-47WX33G PT-47WXC43G PT-4743G...
  • Page 126 1. Safety precautions General guidelines An isolation transformer should always be used during the servicing of a receiver whose chassis is not isolated from AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injuryfrom electrical shocks. It will also protect the receiver from being damaged by accidental shorting that may occur during servicing.
  • Page 127 Hot check circuit Insulation test Connect an insulation tester between an exposed metallic part and A.C. line. Apply 1080VAC/60Hz for 1 second. Confirm that the current measurement is 0.5mA ~ 2.0mA. Repeat test with other metallic exposed parts. X ray radiation WARNING The potential source of x ray radiation in the PTV set is in the high voltage section and the picture tube.
  • Page 128 CAUTION - Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 °F (30 ~ 40 °C) higher. Please use a high temperature soldering iron and set it to 700 ± 20 °F (370 ± 10 °C). - Pb free solder will tend to splash when heated too high (about 1100 °F or 600 °C).
  • Page 129 3. Important safety tests Measuring H.V. The anode caps are cemented to the CRTs. To gain access for high voltage measurement, remove the red CRT’s anode lead from the flyback transformer distributor. Grasp the anode lead protective cap at its bottom and squeeze it against thelocking cap body inside, rotate 1/4 turn counter clockwise and pull the anode lead sleeve out of the FBT distributor.
  • Page 130 high voltage distributor on FBT. DVM and power supply connection 5. Connect the 15 ~ 25 V DC variable power supply positive lead to D34 or IC802 pin 2 (D Board) and negative lead to heat sink of Q551 or D825 Procedures: 1.
  • Page 131 holes in the board to mount standard transistors or diodes. Some chips capacitor or resistor board solder pads may have holes through the board,however the hole diameter limits standard resistor replacement to 1/8 watt. Standard capacitor may also be limited for the same reason. It is recommended that identical components be used.
  • Page 132 1. Remove the solder from all of the pins of a Flat IC by using a desolder braid 2. Put the iron wire under the pins of the Flat IC and pull it in the direction indicated while heating the pins using a soldering iron. A small awl can be used instead of the iron wire.
  • Page 133 6. Check with a magnifier for solder bridge between the pins or for dry joint between pins and soldering pads. To remove a solder bridge, use a de solder braid as shown in the figure below IMPORTANT To protect against possible damage to the solid state devices due to arcing or static discharge, make certain that all ground wires are securely connected CAUTION...
  • Page 134 5. PTV Location of controls...

  • Page 135: Receiver Feature Table

    6. Receiver feature table FEATURE/MODEL PT-53WX53G / PT-53WX53G/PT-47WX53G / PT- 47WX53G CHASSIS AP825 MICRO 256K MENU LANGUAGE ENG/SPAN/FR CLOSE CAPTION V-CHIP (USA/CANADA CHANNEL INFO BANNER VIDEO INPUT SKIP SKIP CHANNEL COUNT PIP (1T), 2T PIP (2T), 2T SPLIT 2T SPLIT REMOTE CONTROL (W/LIGHT) EUR7603Z90 CRT SUPPLIER...
  • Page 136 FEATURE/MODEL PT-53WX53G / PT-53WX53G/PT-47WX53G / PT- 47WX53G BASS/BALANCE/TREBLE CONTROL AI SOUND SURROUND SPATIALIZER/BBE A/V IN (REAR/FRONT) 4(3/1) A/V PROGRAM OUT AUDIO OUT (FAO: F, VAO:V) F, V COMPONENT INPUT (Y, Pb, Pr) S-VHS INPUT (REAR/FRONT) HDMI/HDCP INPUT DVI/HDCP Note: Specifications are subject to change without notice or obligation. FEATURE/MODEL PT-47WX33G PT-47WXC43G...
  • Page 137 FEATURE/MODEL PT-47WX33G PT-47WXC43G BASS/BALANCE/TREBLE CONTROL AI SOUND SURROUND SPATIALIZER/BBE A/V IN (REAR/FRONT) 4(3/1) 4(3/1) A/V PROGRAM OUT AUDIO OUT (FAO: F, VAO:V) F, V F, V COMPONENT INPUT (Y, Pb, Pr) S-VHS INPUT (REAR/FRONT) HDMI/HDCP INPUT DVI/HDCP DVI/HDCP Note: Specifications are subject to change without notice or obligation.
  • Page 138 FEATURE/MODEL PT-4743G CHASSIS AP825 MICRO 256K MENU LANGUAGE ENG/SPAN/FR CLOSE CAPTION V-CHIP (USA/CANADA CHANNEL INFO BANNER VIDEO INPUT SKIP SKIP CHANNEL COUNT PIP (1T), 2T PIP (2T), 2T SPLIT 2T SPLIT REMOTE CONTROL (W/LIGHT) EUR7603Z90 CRT SUPPLIER MDDA (CENTAUR) SCREEN PROT SCREEN PACKED SEPARATELY CHASSIS COMB FILTER...
  • Page 139 7. Board description table BOARD PART NUMBER DESCRIPTION A-BOARD TNP2AH045 MAIN CHASSIS D-BOARD TNP2AH046 POWER SUPPLY * DC-BOARD TNPAA120 CONVERGENCE CIRCUIT * DV-BOARD TNP2AA114 DVI BOARD * DG-BOARD TNP2AA126 PIP PROCESSING, SPLIT, SEARCH, FORMATS LB-BOARD TNP2AA147 BLUE PRT LR-BOARD TNP2AA145 RED PRT LG-BOARD TNP2AA146...
  • Page 140 Note: For additional information for this remote please refer to the owner’s manual section remote operation, listed on the parts list section. 9. Location of controls (EUR7613Z40 remote)

  • Page 141: Eeprom Copy Jig

    Note: For additional information for this remote please refer to the owner’s manual section remote operation, listed on the parts list section. 10. Auto diagnosis feature This receiver incorporates a new self diagnosis feature. With this new feature will be easier for the technician to detect the failures.
  • Page 142 This PTV has a feature that allows to clone convergence and main EEPROM data adjustments from a PTV to other by connecting a jig to the PTV set. A jig part number TXFJIG01SER, is available through Matsushita/Panasonic Services. Preparation: To connect this jig, remove the lower back cover as instructed on disassembly for service section on this service manual and insert the jig into A10 connector located on the A-Board.
  • Page 143 - EXT to copy from jig to internal EEPROM. 5. Then select from and press ACTION on remote: - 480i_p format - 1080i format - Z480i format (480i ZOOM mode) - NOT USE to back up data - ALL to copy all convergence data from internal EEPROM - D480i (default factory preset) - D1080i (default factory preset) NOTE:...
  • Page 144 NOTE: All the measurements are in DC with a digital multimeter, color bar pattern, picture settings normalized and sound set to minimum. 13. Chassis& boards layout (location of main components) Chassis and boards layout...
  • Page 145 A-BOARD...
  • Page 146 D-BOARD...
  • Page 147 R-BOARD VIEW DC-BOARD TOP VIEW...
  • Page 148 DC-BOARD BOTTOM VIEW DV-BOARD...
  • Page 149 DG-BOARD TOP VIEW DG-BOARD BOTTOM VIEW...
  • Page 150 14. Disassembly for service NOTE: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be reconnected using jumper leads, if necessary, before power is applied to PTV for service. Speaker grille removal Some models come with three pieces (sides for speakers and center cover); Speaker grille(s), it is secured to the cabinet of the PTV or on the sides.
  • Page 151 Keyboard and front A/V inputs removal 1. Remove the speaker grille. 2. Unplug the connectors from the keyboard and front A/V inputs assemblies. Remove the screws from the control panel and tilt the front panel assembly upward and release it from the front cabinet. Then remove the screws affixing the keyboardand front A/V inputs to the control panel.
  • Page 152 Back cabinet removal 1. Remove the back lower cover. (Detailed previously). 2. The top back cover (plastic shell) is secured with (14) screws around its perimeter. See figure for screws location. 3. Be careful not to damage the mirror secured to the underside of the back cover.
  • Page 153 Screen frame removal 1. Remove the speaker grille. Disconnect the cables leading to the keyboard and the AV panels and remove the keyboard and AV panel assembly. The assembly is secured by three (3) screws. 2. At this point the front cover is held only by four screws, be careful not to push the cabinet forward.
  • Page 154 4. Remove the horizontal barrier panel at the back of the cabinet. 5. Unplug connectors (K1, G1 and speaker connectors) and pull out the main chassis block. Note: Main chassis block can be serviced either in normal position or laying on its back (protect hookup terminal from damage).
  • Page 155 14.1. Chassis assembly The chassis assembly shown in figure includes all the electrical and optical (light box) components Chassis front view A-Board 1. A-Board is secured to the chassis tray with five screws. 2. The A-Board is mated to the D-Board by four flexible connectors (male side of connectors): A1, A2, A3 &...
  • Page 156 D-Board 1. D-Board is secured to the chassis tray with five screws. 2. The D-Board is mated to the A-Board by four connectors (female side of connectors): D1, D2, D3 & D4. To remove this board, unplug the connectors on the A-Board pulling from the sides of each connector. NOTE: Some tie-wraps that secure the wire dressings may need to be unfastened for chassis removal.
  • Page 157 NOTE: This board is non-serviceable. Except for JK002 (DVI AUDIO CONNECTOR) and JK002 (DVI CONNECTOR) / When removing this board pull carefully. DC-Board 1. Plugs onto the D-Board at the D21, D22 and D23 (DC1, DC2 and DC3 respectively) connectors. NOTE: This board is non-serviceable.
  • Page 158 To facilitate CRT replacement, the complete CRT mounting chassis does not need to be removed. 1. Remove the main chassis block from the cabinet. 2. Remove the optical bracket metal cover (rear side) by removing (6) screws from back, (2) screws from top, and (2) screws from each side. CRT replacement 3.
  • Page 159 Focus pack location 8. Release CRT anode lead from CRT chassis wire clamp and all other wires from holders. 9. Loosen a screw that secures the DY and remove it from the CRT neck. Caution: To insure protection against x ray radiation, the lens must be mounted in place at all times when power is applied to the PTV CRT replacement 1.
  • Page 160 2. Lay CRT face down on a soft cloth. 3. Note position of yoke with centering tabs and remove from defective CRT. 4. Remove CRT DAG ground from defective CRT. Mount it on the replacement CRT exactly as it was on the defective CRT. Note: Replacement CRT is supplied with H.V.
  • Page 161 The optical block mounting has holes to allow for the different size projection screens. These mounts will adjust to projection screens. If the optical block is removed for service or is replaced, it is important that the correct mounting holesare used. 14.3.

  • Page 162: B+ Voltages Table

    15. B+ voltages table Preparation: Set the following controls - Picture to Normal - Bright to Normal - Volume to MIN (0) Procedure: 1. Apply a NTSC COLOR BAR pattern 2. Connect the negative lead of the digital voltmeter to TPGND1 (cold ground).
  • Page 163 16. CRT Set Up CAUTION: Insure yoke plugs on the A Board are reconnected before turning the PTV ON to prevent damage to the horizontal output transistor and/or CRTs. 1. Connect test generator to the antenna terminal and set for a monoscope pattern.
  • Page 164 VOL (RIGHT/LEFT);press ACTION, to save press ACTION again or OTHER to exit without saving. Procedure: NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set top box DTV decoder. 1. Enter to service mode and set the following default DATA NTSC NTSC...
  • Page 165 (use for minor adjustment or for final adjustment, for complete adjustment see following section.) Electrical Adjustment NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a NTSC crosshatch with dots pattern Lens focus adjustment...
  • Page 166 6. Repeat steps for green only. 7. Set VIDEO “C_OFF” DAC from 00 to 03, and project only blue. 8. Repeat steps for blue only. 16.2.1. Focus - Optical lens adjustment Optical adjustments NOTE: This adjustment normally should not require resetting unless the lens has been replaced or adjustment has changed.

  • Page 167: Electronic Adjustments

    This adjustment is intended to correct the horizontal position of the picture NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a NTSC pattern that lets adjust the image to correct vertical size (see above note).
  • Page 168 17.3. Centering magnets adjustment NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. Procedures: 1. Apply a NTSC crosshatch pattern with dots. 2. Set VIDEO “C_OFF” DAC from 00 to 01 to project only green.
  • Page 169 This adjustment is intended to make the picture vertically proportional (top, center and bottom) for NTSC mode NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a NTSC pattern that lets adjust the image to correct vertical linearity (see above note).
  • Page 170 This adjustment is intended to correct the vertical size of the picture for HD 1080i mode. NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set top box DTV decoder. 1. Apply a HD 1080i pattern that lets adjust the image to correct vertical...
  • Page 171 This adjustment is intended to correct the vertical size of the picture for NTSC ZOOM mode NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set top box DTV decoder. 1. Apply a NTSC pattern that lets adjust the image to correct vertical size (see above note) 2.
  • Page 172 This adjustment is intended to correct the horizontal position of the picture for NTSC mode NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a HD 1080i pattern that lets adjust the image to correct horizontal position of the image.
  • Page 173 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. Procedure: 1. Apply a NTSC pattern that lets adjust the image to correct curved sides (see above note) 2. Set VIDEO “C_OFF” DAC from 00 to 01 to project only green.
  • Page 174 This adjustment is intended to adjust horizontal size of the picture for NTSC mode. NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a NTSC pattern that lets adjust the horizontal size.
  • Page 175 17.18. White balance adjustment NOTE: 1080i, 480p, 480I pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. Prior to this adjustment, perform sub-contrast adjustment. This adjustment requires that the service use skills in observing what a screen without color should look like (white picture).
  • Page 176 17.19. NTSC Color adjustment (TINT, B-Y_G, R-Y_A) NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. This adjustment requires that the servicer use its skills in observing what a colorbar pattern should looks like.
  • Page 177 17.20. 1080i Color adjustment (TINT, B-Y_G, R-Y_A) NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Set same settings as NTSC adjustment 2. Apply a 1080i signal, and repeat adjustments as from step 2 in NTSC adjustment.
  • Page 178 sure that color is not set so that it appears dull and washed out. Look for natural colors, try to adjust the picture to appear as a normalphotograph. 17.22. MTS circuit adjustment Note: It is important to adjust the MTS circuit in the order shown below. The MTS circuit adjustment require two steps: 1.
  • Page 179 Procedure: 1. Set PTV to Stereo Mode (in the audio menu). 2. Apply the following signal from the RF signal generator: / Video: 100 IRE flat field, 30% modulation. / Audio: 300Hz, 30% modulation, stereo (left only) (70dB ± 5dB, 75 OPEN, P/S 10dB).

  • Page 180: Convergence Adjustment

    EEPROM copy jig can be used to back-up the data before to performadjustments. NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. IMPORTANT NOTICE: It is strongly recommended to first read and understand the following section prior to make any adjustment.
  • Page 181 Procedure: Apply the convergence alignment template to the PTV screen frame to converge the green raster only. Remove the convergence alignment template following this alignment. The red and blue rasters can then be aligned to the green raster. Raster Set-Up: 1.
  • Page 182 12. Press “TV/VIDEO” key on remote to enter “OSD_POS” mode. 13. Press “5” key on remote so that monoscope pattern appears (superimpose mode) 14. Move cursor by pressing VOL right - left and CH up - down so that cursor center overlap monoscope pattern center 15.
  • Page 183 When “7” is pressed and the data is saved, it will overwrite the factory default. 18.1. Coarse adjustment mode (COARSE) NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. NOTE: It is strongly recommended to first read and understand the following section prior to make any adjustment.
  • Page 184 2. Press “2” repeatedly and apply the pattern of border and cross. 3. Press RECALL to display values 4. Adjust size so that the line of the border closes to the screen frame at top, bottom, left and right, by pressing CH up-down and VOL right-left “SIZE”...
  • Page 185 “PIN” mode adjustment 13. Press “7” then “ACTION” key on remote to save changes 14. Adjust by pressing VOL right-left (see figure) 15. Press “7” then “ACTION” key on remote to save changes “CORNER” mode adjustment 16. Enter to KEY “G-KEY” mode by pressing TV/VIDEO. 17.
  • Page 186 horizontal line center match with the marks on screen frame, if linearity is not good enough, repeat adjustments. 19. Enter to “STATIC” mode by pressing TV/VIDEO. 20. Press “1” or “3” repeatedly until green and red only are shown. 21. Adjust “R-STATIC” so that the center of red overlaps with the center of green “STATIC”...
  • Page 187 27. Enter to SIZE “R-SIZE” mode by pressing TV/VIDEO 28. Adjust so that the line on the border closes to the screen frame at top, bottom, left and right (see figure) 29. Enter to PIN “R-PIN” mode by pressing TV/VIDEO 30.
  • Page 188 18.2. Fine adjustment mode (FINE) (convergence) NOTE: It is strongly recommended to first read and understand the following section prior to make any adjustment. / Convergence adjustment must be perform for 480i-p (same for interlace & progressive), ZOOM 480i and 1080i. HELPFUL HINT: The easiest way to adjust convergence is to start adjusting from the center of the screen to the borders in all the convergence adjustments.
  • Page 189 PRESS BUTTON 1(go) or change color view 3(back) change pattern 4 (only FINE change crossed sections mode) overlap save data copy from clear POWER exit RECALL display values R-TUNE cycle colors TV/VIDEO change mode TV/VIDEO (3 switch convergence mode (FINE/ secs) COARSE) When “7”...
  • Page 190 right - left and CH up - down. PROCEDURE: 1. To Enter to “G-EASY” mode (for green): - Select “EASY” DAC - Press POWER on remote - Press TV/VIDEO (repeatedly) to select mode. - Press R-TUNE (repeatedly) to select color 2.
  • Page 191 11. To move the cursor press MUTE on the remote (cursor flashes), then move the cursor to any of the positions for “EASY” mode 12. This adjustment may help to make rounded lines become straight lines. 13. Adjust to make lines as straight as possible 14.
  • Page 192 20. When slightly adjustment is needed, use “ORIG. POINT” mode. 21. To enter to “G-ORIG. POINT” (for green) mode press TV/VIDEO. 22. With “ORIG. POINT”, the adjustment data changes by 1 step, this allows more detail in the adjustment. Display values on screen by pressing RECALL on remote 23.
  • Page 193 29. Perform adjustments for red so that red overlaps green, do not move green. 30. Press “1 or 3” on the remote until yellow (red and green) and blue appears, do not move green or red. 31. Perform adjustments so that blue overlaps Yellow (red and green). 32.
  • Page 194 2. Confirm that horizontal and vertical center of the picture is located in the center of the screen. 3. Check that the image is proportional horizontally and vertically, proportion is different on every aspect. 18.4. Convergence alignment template The convergence alignment template is a grid approximately the size of the viewing screen used to ensure the proper size and shape of the alignment rasters.

  • Page 195: Service Mode (Electronic Controls)

    TXFQD04ESER1 for 56” is available through Matsushita/Panasonic Services 19. Service Mode (electronic controls) This receiver has electronic technology using the IC bus concept. It performs as a control function and it replaces many mechanical controls. Instead of adjusting mechanical controls individually, many of the control functions are now performedby using “on screen display menu”.
  • Page 196 For some adjustments is required to perform adjustment for each format; convergence adjustment must be performed for 480i-p (same for interlace & progressive),ZOOM 480i and 1080i. A 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 19.2. Exiting the service mode: This PTV goes out from service mode when it is unplugged or turned OFF.
  • Page 197 19.3. Service adjustment default values for items REGISTER DESCRIPTION FORMAT NTSC 480i ZOOM 1080i COLOR COLOR B_Y-G MAGENTA TINT ADJ TINT TINT R_Y-A YELLOW TINT ADJ BRIGH SUB-BRIGHTNESS 01 F6 CONT SUB-CONTRAST CUT-R RED CUT-OFF 02 00 CUT-B BLUE CUT-OFF 02 00 R DR RED DRIVE...
  • Page 198 Important notice: Since Widescreen 16:9 and non-widescreen 4:3 PTVs use the same light box, for this reason is important to set it to the correct version (16:9 or 4: 3). To check this plese see “Instructional flow chart for format aspect switching”...
  • Page 199 19.5. Instructional flow for service mode...

  • Page 201: Conductor Views

    20. Reference of PDF links color 21. Conductor views...

  • Page 202: Block Diagrams

    21.1. A-Board 1 of 2 21.2. A-Board 2 of 2 21.3. D-Board 1 of 2 21.4. D-Board 2 of 2 21.5. DG-Board top view 1 of 4 21.6. DG-Board top view 2 of 4 21.7. DG-Board top view 3 of 4 21.8.

  • Page 203: Schematic Diagrams

    22.2. Video block diagram 23. Schematic diagrams 23.1. Schematic diagrams notes...
  • Page 205 23.2. Notas de los diagramas esquematicos...
  • Page 207 23.3. A-Board schematic 1 of 4 23.4. A-Board schematic 2 of 4 23.5. A-Board schematic 3 of 4 23.6. A-Board schematic 4 of 4 23.7. D-Board schematic 1 of 5 23.8. D-Board schematic 2 of 5 23.9. D-Board schematic 3 of 5 23.10.

  • Page 208: Parts List

    23.27. Voltages 23.28. Waveforms 24. Parts location 25. Parts list 25.1. Description of abbreviations guide...
  • Page 209 25.2. Parts list Ref. No. Part No. Part Name & Description Remarks CAPACITORS C002 TCJ2VC1H220J CAP C 22PF-J-50V C003 TCJ2VC1H220J CAP C 22PF-J-50V C004 F2A1H4R7A162 CAP E 4.7UF-50V C005 F2A1H2R2A162 CAP E 2.2UF-50V C006 ECA0JM332E CAP E 3300UF-6.3V C008 F2A1H4R7A162 CAP E 4.7UF-50V C009 TCJ2VC1H220J...
  • Page 210 Ref. No. Part No. Part Name & Description Remarks C306 F2A2E100A025 CAP E 10UF-250V C307 ECKR1H103ZF5 CAP C .01UF-Z-50V C312 ECKC3D102KBN CAP C 1000PF-K-2KV C313 ECKR2H102KB5 CAP C 1000PF-K-500V C331 F2A1H470A162 CAP E 47UF-50V C332 ECKR1H103ZF5 CAP C .01UF-Z-50V C333 F2A1H470A162 CAP E 47UF-50V C334...
  • Page 212 Ref. No. Part No. Part Name & Description Remarks C526 F2A2E101A026 CAP E 100UF-250V C527 ECKR2H102KB5 CAP C 1000PF-K-500V C528 F2A1H470A162 CAP E 47UF-50V C531 ECA160V33UE CAP E 33UF/160V C533 ECKR2H101KB5 CAP C 100UF-K-500V C535 ECA1EM471E CAP E 470UF-25V C601 EEUFC1C331B CAP E 330UF-16V C602...
  • Page 213 Ref. No. Part No. Part Name & Description Remarks C852 ECA1EM101B CAP E 100UF-25V C854 F2A1C101A159 CAP E 100UF-16V C855 ECJ2VF1H104Z CAP C .1UF-Z-50V C876 ECJ3VF1H224Z CAP C .22UF-Z-50V C877 ECA0JM221B CAP E 220UF-6.3V C878 EEUFC1V561B CAP E 560UF-35V C879 EEUFC1C471LB CAP E 470UF-16V C880...
  • Page 215 Ref. No. Part No. Part Name & Description Remarks C1103 TCJ2VB1C104K CAP C .1UF-K-16V C1105 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C1112 TCJ2VF1H103Z CAP C .01UF-Z-50V C1113 ECEA1CKA101B CAP E 100UF-16V C1502 ECQE6104KFB CAP P 100UF-K-100V C1503 ECQE6104KFB CAP P 100UF-K-100V C1504 ECJ2VF1H104Z CAP C .1UF-Z-50V C1505...
  • Page 217 Ref. No. Part No. Part Name & Description Remarks C2361 TCJ2VB1H471K CAP C 470PF-K-50V C2362 TCJ2VB1H471K CAP C 470PF-K-50V C2363 TCJ2VB1H682K CAP C 6800PF-K-50V C2364 ECJ3VB1H104K CAP C .1UF-K-50V C2365 ECJ3VB1H104K CAP C .1UF-K-50V C2367 ECQB1H224JF3 CAP P .22UF-J-50V C2368 TCJ2VB1H333K CAP C .033UF-K-50V C2369...
  • Page 219 Ref. No. Part No. Part Name & Description Remarks C3034 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3035 F2A1C101A159 CAP E 100UF-16V C3036 F2A1C101A159 CAP E 100UF-16V C3037 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3038 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3039 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3040 ECJ2VF1H104Z CAP C .1UF-Z-50V C3043...
  • Page 221 Ref. No. Part No. Part Name & Description Remarks C3106 TCJ2VB1H102K CAP C 1000PF-K-50V C3109 TCJ2VB1H102K CAP C 1000PF-K-50V C3110 TCJ2VB1H102K CAP C 1000PF-K-50V C3111 TCJ2VB1H102K CAP C 1000PF-K-50V C3112 ECJ2VF1H104Z CAP C .1UF-Z-50V C3113 ECJ2VF1H104Z CAP C .1UF-Z-50V C3114 ECJ2VF1H104Z CAP C .1UF-Z-50V C3119...
  • Page 223 Ref. No. Part No. Part Name & Description Remarks D407 MA3X152K0L DIODE D409 MA3X152K0L DIODE D410 MA3X152K0L DIODE D411 MA3X152K0L DIODE D451 B0EAKC000003 DIODE RECTIFIER D452 B0EAKC000003 DIODE RECTIFIER D453 B0EAKC000003 DIODE RECTIFIER D454 B0EAKC000003 DIODE RECTIFIER D455 B0EAKC000003 DIODE RECTIFIER D456 B0EAKC000003 DIODE RECTIFIER...
  • Page 224 Ref. No. Part No. Part Name & Description Remarks D885 MA2062-BTP DIODE D886 MA2120-ATP DIODE D887 MA2062-BTP DIODE D895 MA2C165001VT DIODE D902 MA2C18800E DIODE D933 MA2C18800E DIODE D953 B0ZAZ0000047 DIODE D962 MA2C18800E DIODE D973 B0ZAZ0000047 DIODE D983 B0ZAZ0000047 DIODE D1002 MA3X152K0L DIODE D1502...
  • Page 225 Ref. No. Part No. Part Name & Description Remarks F801 K5D632AD0002 FUSE 6.3A/125V INTEGRATED CIRCUITS IC451 C1AA00000521 VERTICAL OUT IC701 AN6914S-E1 INT CKT IC801 AN8029 INT CKT IC802 C0EAS0000025 INT. CKT. IC804 B0EBKM000016 DIODE RECTIFIER IC805 AN78M12LB INT CKT IC811 0N3171RLF OPTO COUPLER IC871...
  • Page 226 Ref. No. Part No. Part Name & Description Remarks L510 EXCELDR25V FERRITE BEAD L511 EXCELDR25V FERRITE BEAD L515 EXCELDR25V FERRITE BEAD L516 EXCELDR25V FERRITE BEAD L555 ELH5L718 COIL L701 ELESN100KA COIL PEAKING 10UH L702 EXCELSA35T FERRITE BEAD L703 ELC18B152L FILTER L704 ELC18B151G FILTER...
  • Page 227 Ref. No. Part No. Part Name & Description Remarks L2502 ELESN100JA COIL PEAKING 10UH L3003 ELESN102JA COIL PEAKING 1000UH L3006 ELESN102JA COIL PEAKING 1000UH L3008 ELESN560JA COIL PEAKING 56UH L3009 ELESN100JA COIL PEAKING 10UH L3010 ELESN560JA COIL PEAKING 56UH L3011 ELESN100JA COIL PEAKING 10UH L3012...
  • Page 229 Ref. No. Part No. Part Name & Description Remarks Q907 2SA720TA TRANSISTOR Q931 2SD601ARTX TRANSISTOR Q932 2SD601ARTX TRANSISTOR Q933 2SD601ARTX TRANSISTOR Q934 2SA720TA TRANSISTOR Q935 2SC1318ATA TRANSISTOR Q936 2SC1318ATA TRANSISTOR Q937 2SA720TA TRANSISTOR Q938 2SB1321ARA TRANSISTOR Q941 2SD1992ARA TRANSISTOR Q944 2SD601ARTX TRANSISTOR Q945...
  • Page 231 Ref. No. Part No. Part Name & Description Remarks Q3013 2SD601ARTX TRANSISTOR Q3014 2SD601ARTX TRANSISTOR Q3015 2SD601ARTX TRANSISTOR Q7006 2SD601ARTX TRANSISTOR Q7007 2SD601ARTX TRANSISTOR Q7060 2SB709ARTX TRANSISTOR Q7061 2SD601ARTX TRANSISTOR RELAYS RL801 K6B1ADA00010 RELAY RL802 K6B1ADA00010 RELAY RESISTORS JS063 ERDS2TJ124T RES C 120K-J-1/4W R001 ERJ6GEYJ221V...
  • Page 232 Ref. No. Part No. Part Name & Description Remarks R345 ERDS2TJ470T RES C 47-J-1/4W R347 ERG7ZJ272 RES M 2.7K-J-7W R348 ERDS2TJ563T RES C 56K-J-1/4W R349 ERDS2TJ821T RES C 820-J-1/4W R350 ERG12SJ101P RES M 100-J-1W R351 ERDS1FJ330P RES C 33-J-1/2W R352 ERDS1FJ330P RES C 33-J-1/2W R353...
  • Page 233 Ref. No. Part No. Part Name & Description Remarks R472 ERDS2TJ331T RES C 330-J-1/4W R501 ERJ6GEYJ104V RES M 100K-J-1/10W R502 ERJ6GEYJ680V RES M 68-J-1/10W R503 ERG2FJ180H RES M 18-J-2W R504 ERG3FJ271H RES M 270-J-3W R505 ERG1SJ120P RES M 12-J-1W R506 ERX1SJR47P RES M .47-J-1W R512...
  • Page 234 Ref. No. Part No. Part Name & Description Remarks R822 ERJ6GEYJ222V RES M 2.2K-J-1/10W R832 ERD75TAJ825 RES C 8.2MEG-J-3/4W R833 ERJ6GEYJ101V RES M 100-J-1/10W R835 ERDS2TJ101T RES C 100-J-1/4W R836 ERJ6GEYJ101V RES M 100-J-1/10W R839 ERJ6GEYJ222V RES M 2.2K-J-1/10W R840 ERJ6GEYJ101V RES M 100-J-1/10W R846...
  • Page 235 Ref. No. Part No. Part Name & Description Remarks R946 ERQ14AJ100P RES F 10-J-1/4W R947 ERQ14AJ220P RES F 22-J-1/4W R948 ERDS2FJ122T RES C 1.2K-J-1/2W R949 ERDS2TJ103T RES C 10K-J-1/4W R950 ERDS2TJ683T RES C 68K-J-1/4W R951 ERDS2TJ683T RES C 68K-J-1/4W R952 ERDS2TJ103T RES C 10K-J-1/4W R953...
  • Page 237 Ref. No. Part No. Part Name & Description Remarks R1516 ERJ6GEYJ101V RES M 100-J-1/10W R1517 ERJ6ENF3571V RES M 3.57K-F-1/10W R1518 ERG2SJD333L RES M 33K-J-2W R1519 ERDS2TJ101T RES C 100-J-1/4W R1520 ERDS2TJ221T RES C 220-J-1/4W R1521 ER0S2THF1500 RES M 150-F-1/4W R1522 ERC12GK103D RES C 10K-K-1/2W R1523...
  • Page 239 Ref. No. Part No. Part Name & Description Remarks R2357 ERJ6ENF1303V RES M 130K-F-1/10W R2358 ERJ6GEYJ223V RES M 22K-J-1/10W R2359 ERJ6GEYJ683V RES M 68K-J-1/10W R2360 ERJ6ENF4701V RES M 4.7K-F-1/10W R2361 ERJ6ENF1202V RES M 12K-F-1/10 R2362 ERJ12YJ101U RES M 100-J-1/2W R2363 ERJ6ENF5232V RES M 5.32K-F-1/10W R2364...
  • Page 240 Ref. No. Part No. Part Name & Description Remarks R3007 ERJ6GEYJ102V RES M 1K-J-1/10W R3008 ERJ6GEYJ750V RES M 75-J-1/10W R3009 ERDS2TJ221T RES C 220-J-1/4W R3010 ERJ6GEYJ221V RES M 220-J-1/10W R3011 ERDS2TJ221T RES C 220-J-1/4W R3012 ERJ6GEYJ562V RES M 5.6K-J-1/10W R3013 ERJ6GEYJ221V RES M 220-J-1/10W R3014...
  • Page 242 Ref. No. Part No. Part Name & Description Remarks R3064 ERJ6GEYJ221V RES M 220-J-1/10W R3065 ERJ6GEYJ221V RES M 220-J-1/10W R3069 ERJ6GEYJ221V RES M 220-J-1/10W R3070 ERJ6GEYJ221V RES M 220-J-1/10W R3071 ERJ6GEYJ561V RES M 560-J-1/10W R3072 ERJ6GEYJ561V RES M 560-J-1/10W R3073 ERJ6GEYJ221V RES M 220-J-1/10W R3075...
  • Page 244 Ref. No. Part No. Part Name & Description Remarks R7027 ERJ6GEYJ332V RES M 3.3K-J-1/10W R7029 ERJ6GEYJ332V RES M 3.3K-J-1/10W R7030 ERJ6GEYJ222V RES M 2.2K-J-1/10W R7031 ERJ6GEYJ222V RES M 2.2K-J-1/10W R7032 ERJ6GEYJ332V RES M 3.3K-J-1/10W R7034 ERJ6GEYJ273V RES M 27K-J-1/10W R7035 ERJ6GEYJ472V RES M 4.7K-J-1/10W R7036...
  • Page 245 TKP2AA0699S SIDE GRILLE (L) / PT-56WX53G TKP2AA06910S SIDE GRILLE (R) / PT-56WX53G TXFKP02FSER ASSY CENTER GRILLE / PT-56WX53G TBM2AA0012 BADGE PANASONIC TKP2AA0649S CONTROL PANEL / PT-53WX53G, PT-47WX53G TKP2AA06496S CONTROL PANEL / PT-47WXC43G, PT-4743G, / PT-47WX33G TKP2AA06492S CONTROL PANEL PT-56WX53G TBX2AA0161G...
  • Page 246 Ref. No. Part No. Part Name & Description Remarks ENPE2A001 SPLITTER 2RF TXFKP07GSER ASSY REAR BRACKET KFT7CP336F DISTRIBUTOR M006 TXFJIG01SER EEPROM COPY JIG JK1001 TJB2AA0471 TERMINAL FRONT A/V JK3001 TJB2AA0311 TERMINAL REAR A/V JK5001 DV2R024NKB EDI CONNECTOR (DVI) JK5002 TJB2AA0411 TERMINAL VIDEO M007 TMM2AE10171...

This manual is also suitable for:

Pt-56tw53g

Table of Contents