Specification ... . . 25 Back Cover Clever use saves electricity Thank you very much for purchasing this Panasonic product. Please read this manual before use for your safety. ●...
Safety Instructions Make sure to comply with the following instructions. This section describes what must to be complied with in order to prevent personal injury or damage to property. Each item is grouped according to the level of risk/damage which may ■...
Page 3
WARNING About the power plug/cord ■ DO NOT <May cause fire or electric shock> Do not damage, modify, bend, pull, twist or bundle the power Prohibited ● plug/cord. Do not place a heavy item on the power plug/cord. Do not place the power plug/cord between heavy items. Do not remove the plug from the power supply with a wet hand.
Page 4
WARNING Installation ■ DO NOT <May cause fire or electric shock> Do not use the product outdoors. Prohibited ● Do not install the product in a place which may contact water. ● <May cause fire or electric shock> Contact a licensed service provider for installation service. ●...
Page 5
WARNING Use this product for normal wine. ● -Wine (Use for any other purpose may cause quality loss of the contents). <May cause flame or explosion> In the event of a gas leakage, open a window without touching ● the product and plug. Safety Instructions Make sure to comply with the following instructions.
Page 6
CAUTION During use ■ DO NOT Do not throw any articles into the product. ● Prohibited Do not strike the glass surface with the articles and avoid any ● hard impact. Do not place any item weighing 20 kg or more on the shelf. ●...
Part Name Model number : SBC-P729K / SMR-P729 Temperature Fluorescent lamp controller display (Upper) Inside evaporator (Rear) Door handle Shelf Front discharge opening Lock plate Front discharge opening Stand Power cord Rear of the product Earth wire CMT-6-P110-113-00-0.indd 7 CMT-6-P110-113-00-0.indd 7 05/15/12 8:09 AM 05/15/12 8:09 AM...
Installation Where to install If the product is used or stored in a hot spring or coastal area, it may be ■ damaged (due to sulfur or salt). If the product is used in a very cold or freezing location it may be damaged. ■...
Page 10
Installation Instructions for earthing Make sure the earthing work has been done correctly before use. For a socket with an earth terminal. ■ Product Socket with earth terminal Earth terminal Earth wire Earth terminal Make sure to earth the electrical connection for safe use of the product. ■...
Operation Introduction Use the plug supplied with the product. ■ Single-phase socket Use the electric cord supplied. with earth terminal Remove packaging materials and tapes, ■ and then leave the product for a while for ventilation. Accessories are kept inside the product. Check if anything is missing ■...
Page 12
Operation Re-start Leave the product for at least 5 minutes before re-starting. ■ If the product is re-started immediately after switching off, the overload ■ protection unit or a wiring breaker may trip, or an excessive load may be applied to the compressor, which will result in failure. Temperature adjustment of wine cooler Temp.
Page 13
The inside temperature rises during defrosting, however this does not affect the merchandise since the defrosting period is short. Shelf installation Type 1 (For models : SBC-P245K / SMR-P245) ■ Shelf : Suitable spaces are provided for wine. Insert the shelf into the ●...
Page 14
Operation Shelf installation For model : SBC-P245K / SMR-P245 Install the shelf on the bar directly. Install lower basket on the inner barrel. For model : SBC-P729K / SMR-P729 SBC-P929K / SMR-P929 Guard Tilt the shelf by placing Rear side one side of the shelf on the support piece.
Page 15
Second shelf = 18 bottles First shelf = 18 bottles Model SBC P929K, SMR-P929 Locking the door For model : SBC-P245K / SMR-P245 ■ To lock the door of the product, turn the ● key counter clockwise at the bottom of the door as far as you can.
Operation For model : SBC-P729K / SMR-P729 ■ SBC-P929K / SMR-P929 The door may be locked for security. ■ Use a commercially available key. ■ Insert the key into the hole of the padlock on the body and the door to lock ■...
Page 17
How to checkup and service Door glass Remove any water with a dry cloth since condensation may form on the glass easily during the rainy season. Remove any dirt accumulation in the same manner as above, both outside and inside. Condenser Conduct once each half year Caution...
Page 18
How to checkup and service How to replace inner incandescent lamp For model : SBC-P245K / SMR-P245 ■ How to replace incandescent lamp ● Remove the power cord from the socket. Open the door. Remove 2 screws securing the lamp cover and display panel. Then remove lamp cover from display panel.
How to checkup and service How to replace the interior fluorescent lamp For model : SBC-P729K / SMR-P729 ■ SBC-P929K / SMR-P929 Remove the power plug from the socket. Open the door. Remove the screws securing either the right and left cap. Remove the inside fluorescent cover.
Page 20
■ After cleaning, install the water tray securely. The water tray of model The water tray of model SBC-P729K / SMR-P729 SBC-P245K / SMR-P245 SBC-P929K / SMR-P929 is installed at the rear side is installed inside the of product. machine room.
Page 21
How to checkup and service How to clean the power plug Clean periodically Remove the power plug from the socket, and remove any dust or dirt on the terminals. Also, remove any dust and dirt around the power cord. Wait 5 minutes before reconnecting the power cord after cleaning.
Warning If the unit is not in use temporarily or in storage Be careful not to store in a place where children may play. ■ If a young child is locked in, the door cannot be opened from the inside. Secure the door with tape or rope after inserting a piece of wood in order ■...
Page 23
Troubleshooting Trouble Check items Actions Items inside <Check the power supply circuit> the product Is the socket plugged in? Plug the socket in securely. ⇒ ● are not Is the power supply cut off? Check the power supply source. ⇒ ●...
Troubleshooting When the ambient temperature or humidity is high, condensation may form on the glass face. This is not a product failure. Necessary information Trouble (in detail as much as possible) Model number (You may find details in the badge) Serial number Your name, address, telephone number, route (Please inform the building/room number and...