KX-TG1062CM/KX-TG1063CSK/KX-TGA106CM 1 Safety Precautions 1.1. For Service Technicians • Repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires, injury or electric shock, which can be caused by improper repair work.
KX-TG1062CM/KX-TG1063CSK/KX-TGA106CM 2.2.1. Suggested PbF Solder There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper (Sn+Ag+Cu), you can also use Tin and Copper (Sn+Cu), or Tin, Zinc, and Bismuth (Sn+Zn+Bi). Please check the manufacturer's specific instructions for the melting points of their products and any precautions for using their product with other materials.
KX-TG1062CM/KX-TG1063CSK/KX-TGA106CM 3 Specifications Note: • Design and specifications are subject to change without notice. Note for service: • Operation range: Up to 300 m outdoors, Up to 50 m indoors, depending on the condition. • Optional headset: RP-TCA86, RP-TCA94, RP-TCA95...
KX-TG1062CM/KX-TG1063CSK/KX-TGA106CM 4 Location of Controls and Components Refer to the Operating Instructions. Note: You can download and refer to the Operating Instructions (Instruction book) on TSN Server. 5 Installation Instructions Refer to the Operating Instructions. Note: You can download and refer to the Operating Instructions (Instruction book) on TSN Server.
KX-TG1062CM/KX-TG1063CSK/KX-TGA106CM 7 Schematic Diagram 7.1. For Schematic Diagram 7.1.1. Base Unit (Schematic Diagram (Base Unit_Main)) Notes: 1. DC voltage measurements are taken with voltmeter from the negative voltage line. 2. The schematic diagrams may be modified at any time with the development of new technology.
Page 15
KX-TG1062CM/KX-TG1063CSK/KX-TGA106CM W 0.15mm L 20+/-2mm 3rd layer R807 RXON L801 C827 TP_ANT1 RX_RF C826 RF_RXn *C859 C803 1.5p DA801 RF_RXp W 0.125mm L 7.6mm CP+3.0V Gap 0.125mm W 0.15mm W 0.15mm 1st layer L 5.0mm L 5.0mm 1st layer 1st layer C172 K0.1u...
STAND, WALLMOUNT (for KX-TG1062CM) (for KX-TG1063CSK) ABS-HB PNHS1079Z SPACER, BATTERY COVER PNKK1027Z1 LID, BATTERY PNLC1008ZM CHARGER UNIT ASS'Y (RTL) Note: (*1) The rechargeable Ni-MH batery HHR-4DPA is available through sales route of Panasonic. (*2) Attach the SPACER (A9) to the exact location described above.