Panasonic VL-V700 Series Quick Start Manual
Video intercom system for apartment complexes
Hide thumbs
Also See for VL-V700 Series:
- Installation and operating instructions manual (68 pages) ,
- Installation manual (122 pages) ,
- Installation and operating instructions manual (96 pages)
Advertisement
Quick Links
VL-V900
Lobby Station
Key Features
• Large-capacity, expandable:
The system supports up to 560 room units (main monitors) and 3 lobby stations.
Optional devices such as cameras, access controllers (door openers, key switches, card scanners, etc.), electric locks, and a TV monitor can be connected.
The system can be integrated with a Panasonic PBX system used by facility staff.
Extension boxes can be used to increase the number of lobby stations that can be used in the system. Up to 3 extension boxes can be connected to the control
box, and up to 6 lobby stations can be connected to each extension box. In all, the system supports up to 18 lobby stations.
• Easy to install, configure and maintain:
The system mainly needs only 2 wire cables (1 pair of cables), and minimal equipment.
System settings can be configured in advance using a computer, and uploaded on-site via USB connection.
System settings can be configured on-site using a lobby station, main monitor, and PBX extension telephone.
System events can be logged on an optional SD card (up to 90,000 images captured by a lobby station camera with text logs).
• Convenient features for residents, visitors, and facility staff:
The system can be used in the "room mode" (visitors can call rooms directly) or "reception mode" (visitors calls are routed through a receptionist).
Visitors can use a lobby station to call residents or facility staff.
Residents can use their room monitors to monitor lobby stations and optional cameras, and can allow visitors to enter the lobby and lift.
Residents can use their room monitors to make emergency calls to facility staff. (Not available with the VL-MW251)
Facility staff can make and receive calls to and from residents and visitors.
Wiring Diagram
Lobby Station
[ VL-V900 ] up to 3 units (up to 18*)
Extension Box
[ VL-V703 ] up to 3 units
Control Box
[ VL-V700 ] up to 1 unit
Distribution Box [ VL-V701 ] up to 28 units
Main Monitor
up to 560 units
Lift Controller
[ VL-V702 ] up to 15 units (up to 3 Lifts)
*Up to 18 Lobby Ststion can be installed by adding Extension Boxes.
Lobby Station (up to 18)
(6 lobby station for each
Extension Box (3)
extension box)
NP
OFF
ON
DC IN
V700
K-IN
K-OUT
L1
L2
C1
C2
S1
S2
COAX
NP
NP
Power
Supply
12 V DC
Lobby Station #6
NP
Lobby Station #5
Power
Lobby Station #4
Supply
Unit
Lobby Station #3
Access
controller
Lobby Station #2
(input)
Electric
lock
(output)
NP: Non-polarised
Accessory Information
For the Lobby Station
Flush mount box x1, Screw for Flush mount box (4 mm x 25 mm) x4, Hex wrench x1, Power supply
unit x1 (AC cable is not included.)
Screw for power supply unit (4 mm x 40 mm) x2, Cable binder x2
For the Control Box, Distribution Box, Lift Controller, Extension Box
Screw for mounting the box (3.8 mm x 20 mm) x2, Power supply unit x1 (AC cable is not included.)
Screw for power supply unit (4 mm x 40 mm) x2, Cable binder x3
Optional Accessories
Main Monitor
5-inch
(Smartphone Connect
wide
Model)
VL-MVN511
VL-V900
VL-V700
Control Box
Main Monitor
Distribution Box #1-1
(up to 20)
NP
NP
NP
Control Box (1)
NP
NP
Branch #1
Power
NP
Supply
Branch #2
Unit
Branch #3
Branch #4
PBX
PC
RJ11
USB
TV Monitor
DC IN
NP
NP
Power Supply Unit
Lift Controller
(up to 15 for Relay)
Lift Controller
(up to 3 for Binary)
1
DIP SW 1 : ON
DC IN
NP
Main Monitor
(DECT Wireless Monitor &
7-inch
Wired Monitor Connect Model)
wide
VL-MWD272
Video Intercom System
for Apartment complexes
VL-V700
and
VL-V701
VL-V702
Distribution Box /
Lift Controller
Repeater Box
Repeater
Distribution Box #1-2
#1
NP
NP
#20
NP
NP
NP
NP
Power
Power
Supply Unit
Supply Unit
IN
OUT
DIP
Repeater
Termination
switches
switch
switch
Wiring Distance
Wiring run
Lobby Station - Control Box
Control Box - Distribution Box (Standard Mode)
Distribution Box (Standard Mode) - Main Monitor
Control Box - Distribution Box (Repeater Mode)
Distribution Box (Repeater Mode) - Distribution Box (Standard Mode)
Setup tool, USB driver, manual and
the latest firmware
Download information is available at the
following web site.
http://panasonic.net /pcc/support /intercom/v900
Main Monitor
(2.4GHz Wireless
Monitor Connect Model)
VL-MW251
series
VL-V703
Extension Box
Distribution
Distribution
Distribution
Distribution
Box #1-3
Box #1-4
Box #1-5
Box #1-6
Distribution box
DIP switches
Repeater switch Termination switch
ON
(off)
#1-1
OFF
1 2 3 4 5 6 7 8
ON
(on)
Repeater
OFF
1 2 3 4 5 6 7 8
ON
(off)
#1-2
OFF
1 2 3 4 5 6 7 8
ON
(off)
#1-3
OFF
1 2 3 4 5 6 7 8
ON
(off)
#1-4
OFF
1 2 3 4 5 6 7 8
ON
#1-5
(off)
OFF
1 2 3 4 5 6 7 8
ON
#1-6
(off)
OFF
1 2 3 4 5 6 7 8
ON
#1-7
(off)
OFF
1 2 3 4 5 6 7 8
*Use PE(polyethylene)-insulated cables.
Wire diameter
0.65 mm (22 AWG) 1.2 mm (17 AWG)
100 m
100 m
100 m
100 m
100 m
Main Monitor
5-inch
3.5-inch
wide
(Standard Model)
VL-MV26
Distribution
Box #1-7
(off)
(on)
(off)
(off)
(off)
(off)
(off)
(on)
200 m
200 m
200 m
200 m
200 m
Advertisement
Related Manuals for Panasonic VL-V700 Series
Summary of Contents for Panasonic VL-V700 Series
- Page 1 Optional devices such as cameras, access controllers (door openers, key switches, card scanners, etc.), electric locks, and a TV monitor can be connected. The system can be integrated with a Panasonic PBX system used by facility staff. Extension boxes can be used to increase the number of lobby stations that can be used in the system. Up to 3 extension boxes can be connected to the control box, and up to 6 lobby stations can be connected to each extension box.
- Page 2 Supported functions Support for electric lock releasing (entrance unlocking) x 1 USB connection Dip switch Supported control methods Extend Lobby Stations VIDEO-IN (recommended Panasonic CCTV) x 1 (provide PC application / English) Mode change 1:1 control (Relay signalling) • •...