Table of Contents
Advertisement
[Setup via recorder's main monitor]
Important:
• For a camera whose compression method is [MJPEG],
"10 ips / 15 ips / 30 ips" cannot be selected.
• If a camera whose compression method is
[MJPEG] is included, [MJPEG] camera is set to
"5 ips" even if "10 ips / 15 ips / 30 ips" is set by
slider bar of frame rate setting. You can confirm
the current setting value with [Advanced setup >]
in Recording setup (All cameras).
[Image quality]
Select the recording image quality.
NQ (Normal): Standard quality
FQ (Fine): High quality
SF (Super Fine): Super fine quality
XF (Extra Fine): Extra fine quality
Default: FQ
Important:
• For a camera whose compression method is
[MJPEG], "XF" cannot be set.
• If a camera whose compression method is [MJPEG]
is included, [MJPEG] camera is set to "SF" even if
"XF" is set by slider bar of image quality setting. You
can confirm the current setting value with [Advanced
setup >] in Recording setup (All cameras).
[Referenced recording days]
Calculates and displays the total number of days for
which recording on the hard disk drives is available.
Configure the advanced settings for schedule recording
[Advanced schedule setup]
Up to 16 schedule patterns can be set. Up to 6 time zones of the schedule recording or event recording can be
set for each schedule.
Clicking the [Advanced >] button in the "Schedules" field will open the "Advanced schedule setup" page.
■ Days to record
Select the actions to be taken on each day of the
week based on a time table. [●] indicates the
selected state, [○] the unselected state.
Note:
• The referenced recording days will be displayed cor-
rectly only when the settings have been saved while
the recorder has recognized the camera correctly.
• The referenced recording days will be calculated
based on the assumption that recording is started
on Monday. The special day settings are not taken
into account.
• This value excludes the HDD consumption for the
event/emergency recording.
• If a camera manufactured by other than
Panasonic is used, the value of "Referenced
recording days" will not be displayed.
• "*" preceding an item indicates that the item has
been changed on the "Advanced recording setup"
page.
• When configured to perform recording in high res-
olution and high quality, recording may sometimes
not be performed at the specified rate. When
there may be possibility to fail recording at the
specified rate while using only Panasonic cam-
eras, the confirmation window will be displayed.
[Advanced >] button
The "Advanced recording setup" will be displayed.
Each camera can be set up separately for recording.
(☞ Page 38)
Time table1: Recording according to Time table1.
Time table2: Recording according to Time table2.
Off: Neither schedule nor event recording will take
place.
■ Event recording
Set the recording duration in the event that an alarm
occurs and the recording duration before an alarm
occurs.
[Event recording duration]
Set the recording duration in the event that an alarm
occurs.
2 s/ 5 s/ 10 s/ 20 s/ 30 s/ 1 min/ 2 min/ 3 min/
5 min/ 10 min/ 15 min
36
Advertisement
Table of Contents
