Table of Contents
Advertisement
[Setup via recorder's main monitor]
[Start/End date and time]
Set up the rule of the Start/End date and time of day-
light saving time.
It is displayed when "Auto" is selected in "Daylight
saving time".
Select "Designate by day of the week" or "Designate
by date" as a method to assign the starting (In) and
ending (Out) date and time of daylight saving time.
Important:
• Setting is impossible when the interval between
start (In)/end (Out) is less than an hour.
[Auto time adjustment]
Select a method of auto clock adjustment from the
following.
Off: Does not adjust the time automatically.
Slave: Receives a signal from the ALARM/CON-
TROL connector on the rear panel of the
recorder and adjusts the clock. When the sig-
nal is received and if the clock is within 29
minutes ± the hour, the time will be adjusted to
00 minutes 00 seconds.
[Language] tab
Select the display language for the main monitor and for the web browser on the PC.
[Language]
Japanese/ English/ Français/ Español/ Deutsch/
Italiano/ Русский/ Português/ ไทย/ 中文
Default: English
Master: Outputs a signal from ALARM/CONTROL
connector on the rear panel of the recorder
and adjusts time of other equipment. When
you select "Master", the setting of "Operation
time and date" to set the time for time adjust-
ment will be displayed.
Default: Off
[Operation time and date]
Set time to output a signal from ALARM/CONTROL
connector. It is displayed when you select "Master"
of the "Auto time adjustment".
Default: 00:00
11
Advertisement
Table of Contents
