hit counter script
ABB Relion 615 Series Point List Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Industrial Equipment
  5. Relion 615 series
  6. Point list manual

ABB Relion 615 Series Point List Manual

Feeder protection and control
Hide thumbs Also See for Relion 615 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
®
Relion
615 series
Feeder Protection and Control
REF615
DNP3 Point List Manual

Advertisement

Table of Contents
loading

Related Manuals for ABB Relion 615 Series

Summary of Contents for ABB Relion 615 Series

  • Page 1 ® Relion 615 series Feeder Protection and Control REF615 DNP3 Point List Manual...
  • Page 3 Document ID: 1MRS756711 Issued: 2012-05-11 Revision: D Product version: 4.0 © Copyright 2012 ABB. All rights reserved...
  • Page 4 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license.
  • Page 5 In case any errors are detected, the reader is kindly requested to notify the manufacturer. Other than under explicit contractual commitments, in no event shall ABB be responsible or liable for any loss or damage resulting from the use of this manual or the application of the equipment.
  • Page 6 (EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.

  • Page 7: Table Of Contents

    Table of contents Table of contents Section 1 Introduction...............7 This manual..................7 Intended audience................7 Product documentation...............7 Product documentation set............7 Document revision history.............8 Related documentation..............8 Symbols and conventions..............9 Symbols..................9 Document conventions..............9 Functions, codes and symbols............10 Section 2 DNP3 data mappings.............13 Overview...................13 Supported functions................13 Point list for REF615 Ver.4.0 FE01-09..........15 Binary inputs................15 LD0.ARCSARC1 Fault arc protection stage 1......16...
  • Page 8 Table of contents LD0.DPHHPDOC1 Three-phase directional overcurrent protection - high stage (1)............21 LD0.EFHPTOC1 Non-directional earth-fault and sensitive earth-fault protection - high stage 1......21 LD0.EFIPTOC1 Non-directional earth-fault and sensitive earth-fault protection - instantaneous stage 1......21 LD0.EFLPTOC1 Non-directional earth-fault and sensitive earth-fault protection - low stage 1......21 LD0.EFLPTOC2 Non-directional earth-fault and sensitive earth-fault protection - low stage 2......22 LD0.EFPADM1 Admittance-based earth-fault protection...
  • Page 9 Table of contents LD0.PHPTOV1 Phase overvoltage protection - stage 1..28 LD0.PHPTOV2 Phase overvoltage protection - stage 2..28 LD0.PHPTOV3 Phase overvoltage protection - stage 3..28 LD0.PHPTUV1 Phase undervoltage protection - stage 1.....................28 LD0.PHPTUV2 Phase undervoltage protection - stage 2.....................28 LD0.PHPTUV3 Phase undervoltage protection - stage 3.....................29 LD0.PSPTUV1 Positive-sequence undervoltage protection - stage 1..............29...
  • Page 10 Table of contents CTRL.DCCSWI2 Controllable disconnector (2) control..36 CTRL.ESCSWI2 Controllable earth switch (1) control ..36 LD0.DARREC1 Autoreclosing reset signals......37 LD0.DNPGGIO1 Parameter setting group control....37 LD0.LLN0/LPHD1 Reset indications and LEDs, reset device..................37 LD0.PEMMXU1 Reset accumulated energy values....37 DR.RDRE1 Disturbance recorder..........38 LD0.SPCGGIO1 Multipurpose binary outputs (1)....38 LD0.SPCGGIO2 Multipurpose binary outputs (2)....38 LD0.SRGAPC1 Multipurpose binary outputs - flip-flop resets (1)................39...
  • Page 11 Table of contents LD0.RESVMMXU1 Residual voltage (1)........45 LD0.SECRSYN1 Synchrocheck line and bus state....45 LD0.T1PTTR1 Temperature protection values (1)....45 LD0.VMMXU1 Voltage measurement ........45 LD0.VSMSQI1 Sequence of voltage measurement....46 Section 3 DNP3 protocol implementation........47 DNP3 device profile................47 DNP3 implementation table..............49 Section 4 Glossary.................53 REF615 Point List Manual...

  • Page 13: Section 1 Introduction

    Section 1 1MRS756711 D Introduction Section 1 Introduction This manual The point list manual describes the outlook and properties of the data points specific to the IED. The manual should be used in conjunction with the corresponding communication protocol manual. Intended audience This manual addresses the communication system engineer or system integrator responsible for pre-engineering and engineering for communication setup in a...

  • Page 14: Document Revision History

    C/2010-06-11 Content updated to correspond to the product version D/2012-05-11 Content updated to correspond to the product version Download the latest documents from the ABB Web site http://www.abb.com/substationautomation. 1.3.3 Related documentation Name of the document Document ID DNP3 Communication Protocol Manual...

  • Page 15: Symbols And Conventions

    Section 1 1MRS756711 D Introduction Symbols and conventions 1.4.1 Symbols The caution icon indicates important information or warning related to the concept discussed in the text. It might indicate the presence of a hazard which could result in corruption of software or damage to equipment or property.

  • Page 16: Functions, Codes And Symbols

    Section 1 1MRS756711 D Introduction 1.4.3 Functions, codes and symbols Table 1: REF615 functions, codes and symbols Function IEC 61850 IEC 60617 IEC-ANSI Protection Three-phase non-directional overcurrent PHLPTOC1 3I> (1) 51P-1 (1) protection, low stage Three-phase non-directional overcurrent PHHPTOC1 3I>> (1) 51P-2 (1) protection, high stage PHHPTOC2...
  • Page 17 Section 1 1MRS756711 D Introduction Function IEC 61850 IEC 60617 IEC-ANSI Three-phase overvoltage protection PHPTOV1 3U> (1) 59 (1) PHPTOV2 3U> (2) 59 (2) PHPTOV3 3U> (3) 59 (3) Positive-sequence undervoltage protection PSPTUV1 U1< (1) 47U+ (1) Negative-sequence overvoltage protection NSPTOV1 U2>...
  • Page 18 Section 1 1MRS756711 D Introduction Function IEC 61850 IEC 60617 IEC-ANSI Disturbance recorder RDRE1 Three-phase current measurement CMMXU1 Sequence current measurement CSMSQI1 I1, I2, I0 I1, I2, I0 Residual current measurement RESCMMXU1 Three-phase voltage measurement VMMXU1 Residual voltage measurement RESVMMXU1 Sequence voltage measurement VSMSQI1 U1, U2, U0...

  • Page 19: Section 2 Dnp3 Data Mappings

    Section 2 1MRS756711 D DNP3 data mappings Section 2 DNP3 data mappings Overview This document describes the DNP3 data points and structures available in REF615 Ver.4.0. The data points are unmapped as a default on the DNP3 level. The point lists describe a superset of all DNP3 data available through the standard configurations A, B, C, D, E, F, G, H and I including the optional functionalities.
  • Page 20 Section 2 1MRS756711 D DNP3 data mappings IEC 61850 FE01 FE02 FE03 FE04 FE05 FE06 FE07 FE08 FE09 DEFLPDEF2 ● ● ● ● ● ● DEFHPDEF1 ● ● ● ● ● ● EFPADM1 EFPADM2 EFPADM3 WPWDE1 WPWDE2 WPWDE3 INTRPTEF1 ● ●...

  • Page 21: Point List For Ref615 Ver.4.0 Fe01-09

    Section 2 1MRS756711 D DNP3 data mappings IEC 61850 FE01 FE02 FE03 FE04 FE05 FE06 FE07 FE08 FE09 CBXCBR1 ● ● ● ● ● ● ● ● ● DCXSWI1 ● ● ● ● ● ● ● DCXSWI2 ● ● ● ●...

  • Page 22: Ld0.Arcsarc1 Fault Arc Protection Stage 1

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.1 LD0.ARCSARC1 Fault arc protection stage 1 Table 4: LD0.ARCSARC1 Fault arc protection stage 1 IEC 61850 name SA name Description Values LD0.ARCSARC11 .FADet.stVal ARC_FLT_DET Arc detected 1=Detected LD0.ARCPTRC11 .Op.general OPERATE Operate 1=Operate 2.3.1.2 LD0.ARCSARC2 Fault arc protection stage 2 Table 5:...

  • Page 23: Ctrl.dxxxxx1 Controllable Disconnector (1)

    Section 2 1MRS756711 D DNP3 data mappings IEC 61850 name SA name Description Values CTRL.CCBRBRF1 .OpEx.general TRBU Failure ext.trip 1=Failure .OpIn.general TRRET Operate, re-trip 1=Operate .Str.general CB_FAULT_AL Start, timer running 1=Start 2.3.1.5 CTRL.Dxxxxx1 Controllable disconnector (1) Table 8: CTRL.Dxxxxx1 Controllable disconnector (1) IEC 61850 name SA name Description...

  • Page 24: Ctrl.exxxxx1 Controllable Earth Switch (1)

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.7 CTRL.Exxxxx1 Controllable earth switch (1) Table 10: CTRL.Exxxxx1 Controllable earth switch (1) IEC 61850 name SA name Description Values CTRL.ESCILO1 .EnaCls.stVal ENA_CLOSE Close enabled 1=Enabled .EnaOpn.stVal ENA_OPEN Open enabled 1=Enabled .ItlByPss.stVal ITL_BYPASS Interlocking bypass 1=Bypassed CTRL.ESCSWI1...

  • Page 25: Ld0.Darrec1 Autorecloser

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.11 LD0.DARREC1 Autorecloser Table 14: LD0.DARREC1 Autorecloser IEC 61850 name SA name Description Values LD0.DARREC1 .PrgRec1.stVal INPRO_1 AR 1st reclose 1=In progress .PrgRec2.stVal INPRO_2 AR 2nd reclose 1=In progress .PrgRec3.stVal INPRO_3 AR 3rd reclose 1=In progress .PrgRec4.stVal INPRO_4...

  • Page 26: Ld0.Deflpdef1 Directional Earth-Fault Protection - Low Stage 1

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.13 LD0.DEFLPDEF1 Directional earth-fault protection - low stage 1 Table 16: LD0.DEFLPDEF1 Directional earth-fault protection - low stage 1 IEC 61850 name SA name Description Values LD0.DEFLPTOC1 Low stage (1) .Op.general OPERATE -Operate 1=Operate .Str.general START...

  • Page 27: Ld0.Dphhpdoc1 Three-Phase Directional Overcurrent Protection - High Stage (1)

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.17 LD0.DPHHPDOC1 Three-phase directional overcurrent protection - high stage (1) Table 20: LD0.DPHHPDOC1 Three-phase directional overcurrent protection - high stage (1) IEC 61850 name SA name Description Values LD0.DPHHPTOC1 High stage (1) .Op.general OPERATE -Operate 1=Operate...

  • Page 28: Ld0.Eflptoc2 Non-Directional Earth-Fault And Sensitive Earth-Fault Protection - Low Stage 2

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.21 LD0.EFLPTOC2 Non-directional earth-fault and sensitive earth-fault protection - low stage 2 Table 24: LD0.EFLPTOC2 Non-directional earth-fault and sensitive earth-fault protection - low stage 2 IEC 61850 name SA name Description Values LD0.EFLPTOC2 Low stage (2) .Op.general OPERATE...

  • Page 29: Ld0.Frpfrq2 Frequency Protection (2)

    Section 2 1MRS756711 D DNP3 data mappings IEC 61850 name SA name Description Values .Op.general OPR_OFRQ -Operate 1=Operate LD0.FRPTUF1 Underfrequency .Op.general OPR_UFRQ -Operate 1=Operate LD0.FRPFRC1 Frequency gradient .Op.general OPR_FRG -Operate 1=Operate 2.3.1.26 LD0.FRPFRQ2 Frequency protection (2) Table 29: LD0.FRPFRQ2 Frequency protection (2) IEC 61850 name SA name Description...

  • Page 30: Ld0.Inphar1 Three-Phase Inrush Detection

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.29 LD0.INPHAR1 Three-phase inrush detection Table 32: LD0.INPHAR1 Three-phase inrush detection IEC 61850 name SA name Description Values LD0.INRPHAR1 .Str.general General start 1=Start 2.3.1.30 LD0.INTRPTEF1 Transient/intermittent earth-fault protection Table 33: LD0.INTRPTEF1 Transient/intermittent earth-fault protection IEC 61850 name SA name Description...

  • Page 31: Ctrl.lln0 Local/Remote State (Also Present In Dnp Iin-Bits)

    Section 2 1MRS756711 D DNP3 data mappings IEC 61850 name SA name Description Values .Op.phsC -phsC Operate 1=Operate .Str.general -General Start 1=Start .Str.phsA -phsA Start 1=Start .Str.phsB -phsB Start 1=Start .Str.phsC -phsC Start 1=Start 2.3.1.33 CTRL.LLN0 Local/remote state (also present in DNP IIN-bits) Table 36: CTRL.LLN0 Local/remote state (also present in DNP IIN-bits) IEC 61850 name...

  • Page 32: Ld0.Mvgapc2 Multipurpose Binary Inputs (2)

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.36 LD0.MVGAPC2 Multipurpose binary inputs (2) Table 39: LD0.MVGAPC2 Multipurpose binary inputs (2) IEC 61850 name SA name Description Values LD0.MVGAPC2 .Q1.stVal Input 1 signal 0/1=Off/On .Q2.stVal Input 2 signal 0/1=Off/On .Q3.stVal Input 3 signal 0/1=Off/On .Q4.stVal Input 4 signal...

  • Page 33: Ld0.Pdnsptoc1 Phase Discontinuity Protection

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.40 LD0.PDNSPTOC1 Phase discontinuity protection Table 43: LD0.PDNSPTOC1 Phase discontinuity protection IEC 61850 name SA name Description Values LD0.PDNSPTOC1 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.1.41 LD0.PHHPTOC1 Phase overcurrent protection - high stage 1 Table 44: LD0.PHHPTOC1 Phase overcurrent protection - high stage 1 IEC 61850 name...

  • Page 34: Ld0.Phptov1 Phase Overvoltage Protection - Stage 1

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.45 LD0.PHPTOV1 Phase overvoltage protection - stage 1 Table 48: LD0.PHPTOV1 Phase overvoltage protection - stage 1 IEC 61850 name SA name Description Values LD0.PHPTOV1 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.1.46 LD0.PHPTOV2 Phase overvoltage protection - stage 2...

  • Page 35: Ld0.Phptuv3 Phase Undervoltage Protection - Stage 3

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.50 LD0.PHPTUV3 Phase undervoltage protection - stage 3 Table 53: LD0.PHPTUV3 Phase undervoltage protection - stage 3 IEC 61850 name SA name Description Values LD0.PHPTUV3 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.1.51 LD0.PSPTUV1 Positive-sequence undervoltage protection - stage 1...

  • Page 36: Ld0.Resvmmxu1 Residual Voltage Limit Supervision

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.55 LD0.RESVMMXU1 Residual voltage limit supervision Table 58: LD0.RESVMMXU1 Residual voltage limit supervision IEC 61850 name SA name Description Values LD0.RESVMMXU1 .HiAlm.stVal HIGH_ALARM High alarm 1=Alarm .HiWrn.stVal HIGH_WARN High warning 1=Warning 2.3.1.56 LD0.ROVPTOV1 Residual overvoltage protection (1) Table 59: LD0.ROVPTOV1 Residual overvoltage protection (1) IEC 61850 name...

  • Page 37: Ld0.Seqrfuf1 Fuse Failure Protection

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.60 LD0.SEQRFUF1 Fuse failure protection Table 63: LD0.SEQRFUF1 Fuse failure protection IEC 61850 name SA name Description Values LD0.SEQRFUF1 .Str.general FUSEF_U General start 1=Start .Str3Ph.general FUSEF_3PH Three-phase start 1=Start 2.3.1.61 LD0.SPCGGIO2 Multipurpose binary outputs - status (2) Table 64: LD0.SPCGGIO2 Multipurpose binary outputs - status (2) IEC 61850 name...

  • Page 38: Ld0.T1Pttr1 Thermal Protection (1)

    Section 2 1MRS756711 D DNP3 data mappings IEC 61850 name SA name Description Values .OpNumAlm.stVal OPR_ALM CB operations alarm 1=Alarm .OpNumLO.stVal OPR_LO CB operations lockout 1=Lockout .PresAlm.stVal PRES_ALM Low pressure alarm 1=Alarm .PresLO.stVal PRES_LO Low pressure lockout 1=Lockout .SprChaAlm.stVal SPR_CHR_ALM Spring charge time alarm 1=Alarm 2.3.1.63...

  • Page 39: Ld0.Trpptrc2 Global Conditioning (2)

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.67 LD0.TRPPTRC2 Global conditioning (2) Table 70: LD0.TRPPTRC2 Global conditioning (2) IEC 61850 name SA name Description Values .Op.general Operate input signal 1=Operate .Tr.general Trip output signal 1=Trip 2.3.1.68 LD0.VMHAI1 PQ - Voltage total harmonic distortion Table 71: LD0.VMHAI1 PQ - Voltage total harmonic distortion IEC 61850 name...

  • Page 40: Ld0.Wpwde3 Wattmetric-Based Earth-Fault Protection (3)

    Section 2 1MRS756711 D DNP3 data mappings 2.3.1.72 LD0.WPWDE3 Wattmetric-based earth-fault protection (3) Table 75: LD0.WPWDE3 Wattmetric-based earth-fault protection (3) IEC 61850 name SA name Description Values LD0.WPDSE3 .Str.general START Stage 3 start 1=Start .Op.general OPERATE Stage 3 operate 1=Operate 2.3.1.73 LD0.XAGGIO130 Physical I/O Table 76:...

  • Page 41: Ld0.Xggio120 Physical I/O

    Section 2 1MRS756711 D DNP3 data mappings IEC 61850 name SA name Description Values .Ind6.stVal X110-Input 6 1/0=ON/OFF .Ind7.stVal X110-Input 7 1/0=ON/OFF .Ind8.stVal X110-Input 8 1/0=ON/OFF .SPCSO1.stVal X110-Output 1 1/0=ON/OFF .SPCSO2.stVal X110-Output 2 1/0=ON/OFF .SPCSO3.stVal X110-Output 3 1/0=ON/OFF .SPCSO4.stVal X110-Output 4 1/0=ON/OFF 2.3.1.76 LD0.XGGIO120 Physical I/O...

  • Page 42: Binary Outputs

    Section 2 1MRS756711 D DNP3 data mappings 2.3.2 Binary outputs Table 81: Explanations of the binary output table columns Column name Description IEC 61850 Original IED data object identification. Described in the IEC 61850 format as name Logical Device.Logical Node and thereafter .Data Object.Data Attribute. Logical Node is the same as the application function block name.

  • Page 43: Ld0.Darrec1 Autoreclosing Reset Signals

    Section 2 1MRS756711 D DNP3 data mappings 2.3.2.5 LD0.DARREC1 Autoreclosing reset signals Table 86: LD0.DARREC1 Autoreclosing reset signals IEC 61850 name SA name Description Type LD0.DARREC1 .RsCnt.Oper.ctlVal AR reset all counters .RsRec.Oper.ctlVal AR reset 2.3.2.6 LD0.DNPGGIO1 Parameter setting group control Table 87: LD0.DNPGGIO1 Parameter setting group control IEC 61850 name...

  • Page 44: Dr.rdre1 Disturbance Recorder

    Section 2 1MRS756711 D DNP3 data mappings 2.3.2.9 DR.RDRE1 Disturbance recorder Table 90: DR.RDRE1 Disturbance recorder IEC 61850 name SA name Description Type DR.RDRE1 .MemClr.Oper.ctlVal Clear all records .RcdTrg.Oper.ctlVal Trig recording 2.3.2.10 LD0.SPCGGIO1 Multipurpose binary outputs (1) The binary outputs may be configured either as pulse- or persistent-type outputs. Pulse-type outputs are triggered with the write value "1".

  • Page 45: Ld0.Srgapc1 Multipurpose Binary Outputs - Flip-Flop Resets (1)

    Section 2 1MRS756711 D DNP3 data mappings Table 92: LD0.SPCGGIO2 Multipurpose binary outputs (2) IEC 61850 name SA name Description Type LD0.SPCGGIO2 .SPCS01.ctlVal Output 1 control On/Off .SPCS02.ctlVal Output 2 control On/Off .SPCS03.ctlVal Output 3 control On/Off .SPCS04.ctlVal Output 4 control On/Off .SPCS05.ctlVal Output 5 control...

  • Page 46: Ld0.Srgapc2 Multipurpose Binary Outputs - Flip-Flop Resets (2)

    Section 2 1MRS756711 D DNP3 data mappings 2.3.2.13 LD0.SRGAPC2 Multipurpose binary outputs - flip-flop resets (2) Table 94: LD0.SRGAPC2 Multipurpose binary outputs - flip-flop resets (2) IEC 61850 name SA name Description Type .Rs1.ctlVal Reset flip-flop 1 .Rs2.ctlVal Reset flip-flop 2 .Rs3.ctlVal Reset flip-flop 3 .Rs4.ctlVal...

  • Page 47: Ctrl.cbcswi1 Cb 4-Pole (2 Bit) Position Value

    Section 2 1MRS756711 D DNP3 data mappings 2.3.3.1 CTRL.CBCSWI1 CB 4-pole (2 bit) position value Table 97: CTRL.CBCSWI1 CB 4-pole (2 bit) position value IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.CBCSWI1 Intermediate=0; Off=1; On=2; .Pos.stVal POSITION Bad=3 0…3 0,3,0,3 2.3.3.2...

  • Page 48: Ctrl.dcsxswi2 Disconnector 2, 4-Pole (2 Bit) Position Values

    Section 2 1MRS756711 D DNP3 data mappings 2.3.3.6 CTRL.DCSXSWI2 Disconnector 2, 4-pole (2 bit) position values Table 102: CTRL.DCSXSWI2 Disconnector 2, 4-pole (2 bit) position values IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.DCSXSWI2 Intermediate=0; Off=1; On=2; .Pos.stVal POSITION Bad=3 0…3...

  • Page 49: Ctrl.essxswi2 Earth Switch 2, 4-Pole (2 Bit) Position Values

    Section 2 1MRS756711 D DNP3 data mappings 2.3.3.11 CTRL.ESSXSWI2 Earth switch 2, 4-pole (2 bit) position values Table 107: CTRL.ESSXSWI2 Earth switch 2, 4-pole (2 bit) position values IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.ESSXSWI2 Intermediate=0; Off=1; On=2; .Pos.stVal POSITION Bad=3...

  • Page 50: Ctrl.lln0 Local Remote Station Off

    Section 2 1MRS756711 D DNP3 data mappings 2.3.3.16 CTRL.LLN0 Local remote station off Table 112: CTRL.LLN0 Local remote station off IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.LLN0 Off=0; Loc=1; Rem=2; .LocRem.stVal Station=3 0…3 0,3,0,3 2.3.3.17 LD0.LPHD1 System values Table 113: LD0.LPHD1 System values IEC 61850 name...

  • Page 51: Ld0.Rescmmxu1 Residual Current (1)

    Section 2 1MRS756711 D DNP3 data mappings 2.3.3.20 LD0.RESCMMXU1 Residual current (1) Table 116: LD0.RESCMMXU1 Residual current (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.RESCMMXU1 .A.res.instCVal.mag I0_INST Residual current 0.00..40.0 [xIn] 0,40,0,4000 2.3.3.21 LD0.RESVMMXU1 Residual voltage (1) Table 117: LD0.RESVMMXU1 Residual voltage (1) IEC 61850 name...

  • Page 52: Ld0.Vsmsqi1 Sequence Of Voltage Measurement

    Section 2 1MRS756711 D DNP3 data mappings IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.VMMXU1.PPV Phase-to-phase voltage 0.00…4.00 .phsAB.cVal.mag U_DB_AB -phsAB magnitude [xUn] 0,4,0,400 0.00…4.00 .phsBC.cVal.mag U_DB_BC -phsBC magnitude [xUn] 0,4,0,400 0.00…4.00 .phsCA.cVal.mag U_DB_CA -phsCA magnitude [xUn] 0,4,0,400 2.3.3.25 LD0.VSMSQI1 Sequence of voltage measurement Table 121:...

  • Page 53: Section 3 Dnp3 Protocol Implementation

    Implementation table and the point list tables, provides a complete configuration/interoperability guide for communicating with a device. Table 122: Device profile document DNP3 device profile document Vendor name: ABB Oy Device name: REF615 Highest DNP level supported: Device function: For requests: Level 2+ ○...
  • Page 54 Section 3 1MRS756711 D DNP3 protocol implementation DNP3 device profile document ○ Sometimes ● Configurable as: "Only when reporting event data", or "When reporting event data or multi-fragment messages" Timeouts while waiting for: Data link ○ None ○ Fixed at ____ ○...

  • Page 55: Dnp3 Implementation Table

    Section 3 1MRS756711 D DNP3 protocol implementation DNP3 device profile document ○ Configurable ○ When device restarts ○ Only certain objects ○ When status flags change ○ Sometimes (attach explanation) ○ ENABLE/DISABLE UNSOLICITED No other options are permitted. function codes supported Default counter object/variation: Counters roll over at: ●...
  • Page 56 Section 3 1MRS756711 D DNP3 protocol implementation Table 123: Implementation table OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) Object Variation Function codes Qualifier codes number number Description Function codes (dec) Qualifier codes (hex) (dec) (hex) Binary 1 (read) 00, 01 (start-stop) input –...
  • Page 57 Section 3 1MRS756711 D DNP3 protocol implementation OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) 16-bit 1 (read) 00, 01 (start-stop) 129 (response) 00, 01 (start-stop) 2 (default) analog 06 (no range, or all) 17, 28 (index) input 07, 08 (limited qty) 17, 28 (index) 32-bit...
  • Page 58 Section 3 1MRS756711 D DNP3 protocol implementation OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) Time delay 129 (response) 07 (limited qty) fine (qty = 1) Not defined Class 0 1 (read) 06 (no range, or all) data Class 1 1 (read) 06 (no range, or all)

  • Page 59: Section 4 Glossary

    Section 4 1MRS756711 D Glossary Section 4 Glossary 615 series Series of numerical IEDs for low-end protection and supervision applications of utility substations, and industrial switchgear and equipment CROB Control relay output block Common time of occurrence. The time and date CTO object is an information object that represents the absolute time of day.
  • Page 64 Contact us ABB Oy Distribution Automation P.O. Box 699 FI-65101 VAASA, Finland Phone +358 10 22 11 +358 10 22 41094 www.abb.com/substationautomation...

This manual is also suitable for:

Ref615

Table of Contents