Chipset - Asus Pundit P3-PH5 User Manual
Desktop barebone
Hide thumbs
Also See for Pundit P3-PH5:
- Installation manual (56 pages) ,
- Installation manual (80 pages) ,
- Installation manual (80 pages)
Table of Contents
Advertisement
5.4.4
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause the system to
NorthBridge Configuration
NorthBridge Configuration
North Bridge chipset Configuration
Memory Remap Feature
Configure DRAM Timing by SPD
Initiate Graphic Adapter
Internal Graphic Mode Select
Fixed Graphic Memory Size
DVMT Graphic Memory Size
PEG Port Configuration
PEG Force x1
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-
bit operating system. Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according to
the DRAM SPD (Serial Presence Detect). When disabled, you can manually
set the DRAM timing parameters through the DRAM sub-items.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphic Mode Select [Enabled, 8MB]
Allows you to select the amount of system memory used by the Internal
graphics device.
Configuration options: [Disabled] [Enabled,1MB] [Enabled, 8MB]
ASUS Pundit P3-PH5
malfunction.
[Disabled]
[Enabled]
[PEG/PCI]
[Enabled, 8MB]
[128MB]
[128MB]
[Disabled]
Configure North Bridge
feature.
ENABLED: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLED: Do not allow
remapping of memory
5-23
Advertisement
Table of Contents
