Asus Ez Flash 2 Utility - Asus Pundit P3-PH5 User Manual
Desktop barebone
Hide thumbs
Also See for Pundit P3-PH5:
- Installation manual (56 pages) ,
- Installation manual (80 pages) ,
- Installation manual (80 pages)
Table of Contents
Advertisement
2.
Copy the original or the latest motherboard BIOS file to the bootable floppy disk.
5.1.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2> during the Power-On Self-Test (POST).
To update the BIOS using EZ Flash 2:
1.
Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2.
Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.
3.
You can launch the EZ Flash 2 by two methods.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
A:
Note
[Enter] Select or Load
[Tab] Switch
(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash2
and press <Enter> to enable it.
You can switch between drives by pressing <Tab> before the correct file
is found. Then press <Enter>.
4.
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
•
This function can support devices such as USB flash disk, or floppy disk
with FAT 32/16 format only.
•
Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUS Pundit P3-PH5
ASUSTek EZ Flash 2 BIOS ROM Utility V3.00
SST 49LF008 FWH
Current ROM
P5B-VM
0024 [0101]
05/16/06
A:\
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[B] Backup
[ESC] Exit
[Up/Down/Home/End] Move
5-3
Advertisement
Table of Contents
