Table of Contents
Advertisement
4.2.3.
Binary Value Objects Instance
Binary value objects allow to monitor inverter status and send command such as
RUN/STOP command.
Commandable objects can be used for priority-array and relinquish-default property.
Binary
Object Name
Value ID
#0
RUN/STOP ACT
#1
FWD/REV ACT
#2
FAULT ACT
#4
HAND/AUTO ACT
#6
MAINT REQ
#7
DRIVE READY
#8
AT SETPOINT
#10
RUN/STOP CMD
#11
FWD/REV CMD
#14
FAULT RESET
#15
MBOX READ
#16
MBOX WRITE
#18
SP1PRESET
#19
SP2PRESET
#20
SP3PRESET
#21
SPTSEL
#22
CMDSEL
R=Read-only, W=Writable, C=Commandable.
Description
Indicates the drive run status
(This object access to parameter fd01 bit10)
Indicates the motor rotation's direction
(This object access to parameter fd01 bit9)
Indicates the drive's fault status
Indicates if the drive is locally controlled or not
Commutative operation time alarm status
(This object access to parameter fc91 bit10)
The VSD is ready and waits a start command
(This object access to parameter fd01 bit14)
The VSD has reached the target speed
Commands a drive start
Commands a motor direction's change
Command to reset faults
Command to read parameter
Command to write parameter
Preset speed operation frequency 1
Preset speed operation frequency 2
Preset speed operation frequency 3
Frequency priority selection
(This object access to parameter fa06 bit14)
Command priority selection
(This object access to parameter fa06 bit15)
- 12 -
E6581440
Active/
Access
Inactive Text
RUNS/READY
R
REV/FWD
FAULTED/NONE
HAND/AUTO
YES/NO
READY/NOT
R
READY
REACHED/NO
START/STOP
C
REV/FWD
C
RESET/NO
C
READ/RESET
W
WRITE/RESET
W
SP1/NONE
C
SP2/NONE
C
SP2/NONE
C
ENABLED/OFF
ENABLED/OFF
R
R
R
R
R
C
C
Advertisement
Table of Contents
