Radius-Server Deadtime (Bng) - Cisco NCS 5000 Series Manual
System security command reference for cisco ncs 5000 series
routers
Hide thumbs
Also See for Cisco NCS 5000 Series:
- Hardware installation manual (72 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
radius-server deadtime (BNG)
radius-server deadtime (BNG)
To improve RADIUS response times when some servers are unavailable and cause the unavailable servers to
be skipped immediately, use the radius-server deadtime command in the XR Config mode. To set deadtime
to 0, use the no form of this command.
radius-server deadtime value
no radius-server deadtime value
Syntax Description
value
Command Default
Dead time is set to 0.
Command Modes
XR Config mode
Command History
Release
Release 6.0
Usage Guidelines
A RADIUS server marked as dead is skipped by additional requests for the duration of minutes unless all
other servers are marked dead and there is no rollover method.
Task ID
Task ID
aaa
Examples
This example specifies five minutes of deadtime for RADIUS servers that fail to respond to authentication
requests for the radius-server deadtime command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# radius-server deadtime 5
System Security Command Reference for Cisco NCS 5000 Series Routers
44
Length of time, in minutes, for which a RADIUS server is skipped over by transaction
requests, up to a maximum of 1440 (24 hours). The range is from 1 to 1440. The default
value is 0.
Authentication, Authorization, and Accounting Commands
Modification
This command was introduced.
Operations
read, write
- Quick Links:
- Secure Shell Commands
- Sftp
Hide quick links:
Advertisement
Table of Contents
