Related Manuals for Panasonic SW-9501-S
Summary of Contents for Panasonic SW-9501-S
- Page 1 DVD-R DRIVE UNIT SW-9501-S / SW-9501-T INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : SCSI...
-
Page 2: Table Of Contents
DVD-R DRIVE UNIT SW-9501-S / SW-9501-T INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : SCSI TABLE OF CONTENTS IMPORTANT SAFETY NOTICE 1. PRECAUTIONS WHEN OPERATING ..............A-6 1.1 PRECAUTIONS WHEN TRANSPORTING ............A-6 1.2 INSTALLATION LOCATION ................A-6 1.3 PRECAUTIONS FOR USE ................ -
Page 3: Important Safety Notice
(2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt to disassemble the cabinet. (Model SW-9501-S only) For USA F E D E R A L C O M M U N I C A T I O N S C O M M I S S I O N ( F C C ) R A D I O... - Page 4 LASER SAFETY INFORMATION Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, Subchapter J in effect as of date of manufacture. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laser products.
- Page 5 VORSICHT– CAUTION – L ASER RADIATION WHEN OPEN LASERSTRAHLUNG, WENN ABDECKUNG AVOID EXPOSURE TO BEAM GEOFFNET, NICHT DEM STRAHL AUSSETZEN ADVARSEL – ADVARSEL– º º º º º L ASERSTRALING NAR DEKSEL APNES. LASERSTRALING VED ABNING. º º º º UNNGA EKSPONERING FOR STRALEN UNDGA UDSÆTTELSE FOR STRALING VARNING –...
- Page 6 LASER Specification Type: Semiconductor laser GaAlAs Wave Length: 655 ~ 664 nm θ Divergence: = 76.6 ° ± 4 ° Output Power: Read = 0.7 mW Write = 17 mW Laser-Daten: (For German) Typ: GaAlAs-Halbleiter-Laser Wellenlänge: 655 ~ 664 nm θ...
-
Page 7: Important Safety Instructions
E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance, indicating a need for service. For Model SW-9501-S This product can be used with the attached power cord only. For Model SW-9501-T... - Page 8 INTRODUCTION This DVD-R drive features 650 nm Laser Wave Length & 4.7GB DVD-R Media Writing technology. DVD-R disc is compact disc memory that you can written high capacity digital data on the area one time and read with this DVD-R drive. This drive unit uses DVD-R discs which bear the following mark.
-
Page 9: Precautions When Operating
CHAPTER 1 PRECAUTIONS WHEN OPERATING 1.1 PRECAUTIONS WHEN TRANSPORTING To avoid damage * Keep the original packing materials for the drive unit. * Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing. 1.2 INSTALLATION LOCATION Do not place unit in the following environments. - Page 10 Do not write on the recording / reading side, or paste paper to the surface of the disc. When labelling a disc for identification purposes, write only on the premarked label side using a soft, felt tip marker. Do not store the disc in a place where the temperature is high.
-
Page 11: Parts And Functions
CHAPTER 2 PARTS AND FUNCTIONS 2.1 FRONT VIEW DISC TRAY Accepts a disc. BUSY INDICATOR Lights when data is being accessed from the disc. WRITING INDICATOR Lights when the drive is writing onto the writable disc. EMERGENCY EJECT HOLE Insert an instrument such as straightened paper clip into this hole to manually eject the tray. -
Page 12: Rear View
2.2 REAR VIEW SCSI INTERFACE CONNECTOR Connects to host computer’s SCSI interface connector. AC (IN) CONNECTOR Connects to AC power outlet using AC power cord. SCSI ID SWITCH Set ID-Number of SCSI interface. Push ( ID No. : Down ) Push ( ID No. -
Page 13: Connections
CHAPTER 3 CONNECTIONS 3.1 CONNECTING VIEW AC (IN) SCSI connector on the rear Connector side of the drive unit Interface Cable AC Power Cord To SCSI Connector on Host Computer To AC Power Outlet CAUTION : Input voltage changes automatically within a range of 100 V ~ to 240 V ~ . A-10... -
Page 14: Guide To Operation
CHAPTER 4 GUIDE TO OPERATION 4.1 INSTALLATIONS • Starting the drive. Turn on the power supply. Press the eject button. The tray is ejected from the drive. Place the disc in the tray with the disc's label facing up. Press the eject button or press the tray lightly as in the following figure. The tray is retracted automatically. -
Page 15: General Description
CHAPTER 5 GENERAL DESCRIPTION 5.1 FEATURE SUMMARY Embedded SCSI-2 Interface. High Capacity Digital Data Write and Read Available. Coped with 650 nm Laser Wave Length & 4.7GB DVD-R Media Writing. TILT Servomechanism Equipped. 5.2 SYSTEM SET UP Hardware System [ Example of SCSI system set-up ] This unit consists as SCSI Device and basically must be installed in SCSI System. -
Page 16: Specification Summary
CHAPTER 6 SPECIFICATION SUMMARY 6.1 PERFORMANCE Disc diameter 12cm, 8cm Disc speed (DVD Single Layer 1x mode) *1 570 ~ 1390 r/min (CLV) *2 (DVD Dual Layer 1x mode) 630 ~ 1530 r/min (CLV) Data capacity Reading 3.95 / 4.7 GBytes (DVD-R) 4.7 GBytes (DVD-ROM Single Layer) 8.5 GBytes (DVD-ROM Dual Layer) Writing... -
Page 17: Error Rates
6.2 ERROR RATES • Soft read errors Less than 10 • Hard read errors Less than 10 6.3 GENERAL PERFORMANCE Power requirement 100 – 240 V ~ AUTO 0.34 – 0.17 A 50 / 60 Hz Dimensions (W x H x D) 190 x 62.8 x 270 mm Weight 2500 g [ typical ]... -
Page 18: Before Requesting Service
CHAPTER 7 BEFORE REQUESTING SERVICE 7.1 TROUBLESHOOTING (1) There are many kinds of problems caused by misuse. When a problem occurs, check the table below which describes possible problems occurring with your DVD-R drive. (2) If the DVD-R drive is not operating correctly and you cannot restore operation by following the detailed procedures in the table below, do not remove the cover of the units or adjust further. - Page 19 Weight and dimensions shown are approximate. Specifications are subject to change without notice. LMQT00427 Created in Japan...