Page 1
Supplement for Administrator Guide SIP Phone KX-HDV100 Model No. Please use this supplement manual together with the latest English Administrator Guide. Document Version 2016-08...
Page 2
Example: {mac} → 0080f0c571eb If the URL contains {MODEL}, it will be replaced with {MODEL} the device’s model name. Example: {MODEL} → KX-HDV100 If the URL contains {fwver}, it will be replaced with the {fwver} device’s firmware version. Example: {fwver} → 01.000 Note •...
Page 3
KX‐HDV100 Software File Version 02.040 or later 1. 4.5.4 VoIP Settings [Line 1] Change the followings in "SRTP Mode" on page 117 (Before) • SRTP • RTP/SRTP Value Range Note • When RTP/SRTP is selected, operation is in RTP mode. (After) • SRTP • RTP/SRTP Note Value Range •...
Page 4
KX‐HDV100 Software File Version 02.067 or later 1. 5.3.1 System Settings Add the following configuration parameter. FWD_DND_MENU_ENABLE BOOLEAN Value Format Specifies whether the "Fwd/DND" setting is displayed in MENU. Description ・Y: Displayed Value Range ・N: Not displayed Default Value BLOCK_ANONY_MENU_ENABLE Value Format BOOLEAN Specifies whether the "Block Anonymous" setting is displayed in MENU. Description ・Y: Displayed Value Range...
3. 5.3.18 SIP Settings Add the following configuration parameter. SIP_REPLACE_ENABLE_n SIP_REPLACE_ENABLE_1 Parameter Name Example Value Format BOOLEAN Description Specifies whether to use "Replaces Header". ・Y: Use "Replaces Header" Value Range ・N: Do not use "Replaces Header" Default Value SIP_INC_INVITE_RTP_MODE_n SIP_INC_INVITE_RTP_MODE_1 Parameter Name Example Value Format INTEGER...
5. 5.3.24 VQ Report by PUBLISH Add the following configuration parameter. VQREPORT_SEND_OPT_CODEC_ENABLE BOOLEAN Value Format Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when Description the codec is changed. ・Y: Send VQREPORT when a change of codec is detected Value Range ・N: Send VQREPORT at the end of a conversation Default Value...
Page 7
7. 5.3.28 Call Control Settings Add the following configuration parameter. FWD_SYNCHRO_FORCE_DISABLE_n FWD_SYNCHRO_FORCE_DISABLE_1 Parameter Name Example BOOLEAN Value Format Specifies whether to synchronize the Call Forward settings in Description FWD_DND_SYNCHRO_ENABLE_n. ・Y: Do not synchronize Value Range ・N: Synchronize Default Value CONF_SERVER_HOLD_ENABLE BOOLEAN Value Format Specifies whether to hold the call when connecting an N-party conference.
KX‐HDV100 Software File Version 02.100 or later 1. 4.2.2 Network Status Change the followings in "Setting Mode" on page 71. (Before) • Disable • LLDP Value Range • Manual (After) • Disable • LLDP • CDP Value Range • LLDP/CDP • Manual 2. 4.3.2 Ethernet Port Settings Add the following WEB setting.
4. 5.3.1 System Settings Add the following configuration parameter. CALL_SETTINGS_MENU_ENABLE BOOLEAN Value Format Specifies whether the "Call Settings" setting is displayed in MENU. Description ・Y: Displayed Value Range ・N: Not displayed Default Value DELAY_RING_TIME_n Parameter Name Example DELAY_RING_TIME_1 INTEGER Value Format Specifies the length of time, in seconds, until the unit rings.
Page 10
PCAP_ENABLE BOOLEAN Value Format Specifies whether to enable or disable packet capturing using the Wireshark Description utility (PCAP Remote). ・Y: Enable PCAP Remote Value Range ・N: Disable Default Value PCAP_REMOTE_ID STRING Value Format Specifies the ID of the IP phone whose packets will be captured using the Description Wireshark utility (PCAP Remote).
Page 11
5. 5.3.3 Ethernet Port Settings Add the following configuration parameter. CDP_ENABLE Value Format BOOLEAN Specifies whether to enable the CDP feature. Description ・Y: Enable CDP Value Range ・N: Disable Default Value Web User Interface Reference Enable CDP CDP_INTERVAL Value Format INTEGER Description Specifies the interval, in seconds, between sending CDP frames.
Page 12
8. 5.3.27 SRTP Settings Add the following configuration parameter. DISPLAY_SRTP_CALL_ENABLE BOOLEAN Value Format Selects whether an icon is displayed when the unit is using encrypted call mode Description (SRTP). ・Y: Display an icon for encrypted calls Value Range ・N: Disable Default Value 9.