Page 1: Sip Phone
SIP Phone KX-HDV230 Model No. Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. In this manual, the suffix of each model number is omitted unless necessary.
Page 2: Related Documentation
Briefly describes basic information about the installation of the unit. Operating Instructions Describes information about the installation and operation of the unit. Manuals and supporting information are provided on the Panasonic Web site at: http://www.panasonic.net/pcc/support/sipphone/ Technical Support When technical support is required, contact your phone system dealer/service provider.
Page 3: Table Of Contents
Table of Contents Table of Contents 1 Initial Setup .....................21 Setup ..........................22 1.1.1 Factory Defaults ......................22 1.1.2 Language Selection for the Unit ..................22 1.1.3 Basic Network Setup ......................22 1.1.4 Overview of Programming ....................25 1.1.5 Phone User Interface Programming ................26 1.1.5.1 Changing the Language for Phone User Interface Programming .......26 1.1.6 Web User Interface Programming ..................26...
Page 4 Table of Contents Ethernet Link Status ....................71 IP Address Mode ......................71 4.2.2.2 IPv4 ..........................72 Connection Mode ......................72 IP Address ........................72 Subnet Mask ......................72 Default Gateway .......................72 DNS1 ........................72 DNS2 ........................73 4.2.2.3 IPv6 ..........................73 Connection Mode ......................73 IP Address ........................73 Prefix .........................73 Default Gateway .......................73 DNS1 ........................74 DNS2 ........................74...
Page 5 Table of Contents PC VLAN ID ......................83 PC Priority .......................83 4.3.2.3 VLAN ...........................84 Enable VLAN ......................84 IP Phone VLAN ID ....................84 IP Phone Priority .....................84 PC VLAN ID ......................84 PC Priority .......................85 4.3.3 HTTP Client Settings ......................85 4.3.3.1 HTTP Client .........................85 HTTP Version ......................85 HTTP User Agent ......................86 Authentication ID .......................86...
Page 6 Table of Contents Enable Call Log (Line 1–6) ..................96 4.3.8 UC Settings ........................97 4.3.8.1 Presence Feature ......................97 Enable UC .........................97 Server Address ......................97 Local XMPP Port .......................97 User ID ........................98 Password ........................98 4.3.9 XML Application Settings ....................99 4.3.9.1 XML Application ......................99 Enable XMLAPP .......................99 User ID ........................99 Password ........................100...
Page 7 Table of Contents 4.4.3.1 Admin Password ......................112 Current Password ....................112 New Password ......................112 Confirm New Password ..................112 4.4.4 Time Adjust Settings ....................113 4.4.4.1 Synchronization (Synchronisation) ................113 Server Address .......................113 Synchronization Interval (Synchronisation Interval) ..........113 4.4.4.2 Time Zone .........................113 Time Zone .......................113 4.4.4.3 Daylight Saving Time (Summer Time) ...............114 Enable DST (Enable Summer Time) ..............114...
Page 8 Table of Contents SRV lookup Prefix for UDP ..................124 SRV lookup Prefix for TCP ..................125 SRV lookup Prefix for TLS ..................125 Local SIP Port ......................125 SIP URI ........................126 T1 Timer ........................126 T2 Timer ........................126 REGISTER Expires Timer ..................127 Enable Session Timer (RFC 4028) .................127 Session Timer Method ....................127 Enable 100rel (RFC 3262) ..................127 Enable SSAF (SIP Source Address Filter) .............128...
Page 9 Table of Contents First-digit Timeout ....................138 Inter-digit Timeout ....................138 Timer for Dial Plan ....................138 Enable # Key as delimiter ..................138 International Call Prefix ...................139 Country Calling Code ....................139 National Access Code .....................139 Default Line for Outgoing ..................139 Call Park Number ....................140 Enable Call Park Key ....................140 Park Retrieve Number ....................140 Park Retrieve Soft Key ....................140...
Page 10 Table of Contents 4.6.5.2 Busy Tone .........................151 Tone Frequencies ....................151 Tone Timings ......................151 4.6.5.3 Ringing Tone ......................152 Tone Frequencies ....................152 Tone Timings ......................152 4.6.5.4 Stutter Tone .......................152 Tone Frequencies ....................152 Tone Timings ......................153 4.6.5.5 Reorder Tone ......................153 Tone Frequencies ....................153 Tone Timings ......................153 4.6.6 Import Phonebook ......................154...
Page 11 Table of Contents IP_ADDR_MODE ......................186 CONNECTION_TYPE ....................186 STATIC_IP_ADDRESS .....................186 STATIC_SUBNET .....................186 STATIC_GATEWAY ....................187 USER_DNS1_ADDR ....................187 USER_DNS2_ADDR ....................188 DHCP_DNS_ENABLE ....................188 DHCP_HOST_NAME ....................188 DHCP_VENDOR_CLASS ..................188 CONNECTION_TYPE_IPV6 ..................189 STATIC_IP_ADDRESS_IPV6 ...................189 PREFIX_IPV6 ......................189 STATIC_GATEWAY_IPV6 ..................189 USER_DNS1_ADDR_IPV6 ..................190 USER_DNS2_ADDR_IPV6 ..................190 DHCP_DNS_ENABLE_IPV6 ..................190 5.3.3 Ethernet Port Settings ....................190 PHY_MODE_LAN .....................190 PHY_MODE_PC .......................191 VLAN_ENABLE ......................191...
Page 12 Table of Contents FIRM_VERSION ......................200 5.3.7 HTTP Settings ......................200 HTTP_VER ........................200 HTTP_USER_AGENT ....................200 HTTP_AUTH_ID ......................201 HTTP_AUTH_PASS ....................201 HTTP_PROXY_ENABLE ..................201 HTTP_PROXY_ADDR ....................202 HTTP_PROXY_PORT ....................202 HTTP_PROXY_ID .....................202 HTTP_PROXY_PASS ....................202 5.3.8 HTTPD/WEB Settings ....................202 HTTPD_LISTEN_PORT ....................202 HTTPD_PORTOPEN_AUTO ..................203 HTTPD_PORTCLOSE_TM ..................203 USER_ID ........................203 USER_PASS ......................203 ADMIN_ID .........................204 ADMIN_PASS ......................204 5.3.9...
Page 13 Table of Contents XML_INITIATE_KEY_SOFT1 ..................213 XML_INITIATE_KEY_SOFT2 ..................214 XML_INITIATE_KEY_SOFT3 ..................214 XMLAPP_FFKEY_ENABLE ..................214 5.3.11 XSI Settings ........................214 XSI_ENABLE ......................214 XSI_SERVER ......................215 XSI_SERVER_TYPE ....................215 XSI_SERVER_PORT ....................215 XSI_USERID_n ......................215 XSI_PASSWORD_n ....................216 XSI_PHONEBOOK_ENABLE_n ................216 XSI_PHONEBOOK_TYPE_n ..................216 XSI_CALLLOG_ENABLE_n ..................216 5.3.12 XMPP (UC-ONE) Settings ....................217 UC_ENABLE ......................217 UC_USERID ......................217 UC_PASSWORD ......................217 XMPP_SERVER ......................217...
Page 14 Table of Contents SNMP_ENABLE ......................226 SNMP_TRUST_IP .....................226 SNMP_TRUST_PORT ....................226 SNMP_RO_COMMUNITY_STRING .................226 SNMP_SECURITY_TYPE ..................227 SNMP_SECURITY_USER ..................227 SNMP_AUTH_TYPE ....................227 SNMP_AUTH_PASSWORD ..................227 SNMP_ENCRYPT_TYPE ..................227 SNMP_ENCRYPT_PASSWORD ................228 5.3.16 Multicast Paging Settings .....................228 MPAGE_ADDRm ......................228 MPAGE_IPV6_ADDRm .....................228 MPAGE_PORTm .......................228 MPAGE_PRIORITYm ....................229 MPAGE_LABELm .....................229 MPAGE_SEND_ENABLEm ..................229 MPAGE_CODEC .......................230 MPAGE_SP_VOL_EMERGENCY ................230 MPAGE_SP_VOL_PRIORITY ...................230...
Page 15 Table of Contents STUN_2NDSERV_PORT ..................240 STUN_INTVL ......................240 SIP_ADD_RPORT .....................240 PORT_PUNCH_INTVL ....................241 RTP_PORT_PUNCH_INTVL ..................241 5.3.22 SIP Settings ........................241 SIP_USER_AGENT ....................241 PHONE_NUMBER_n ....................242 SIP_URI_n .........................242 SIP_RGSTR_ADDR_n ....................242 SIP_RGSTR_PORT_n ....................243 SIP_PRXY_ADDR_n ....................243 SIP_PRXY_PORT_n ....................243 SIP_PRSNC_ADDR_n ....................243 SIP_PRSNC_PORT_n ....................244 SIP_OUTPROXY_ADDR_n ..................244 SIP_OUTPROXY_PORT_n ..................244 SIP_SVCDOMAIN_n ....................244 SIP_AUTHID_n ......................245 SIP_PASS_n ......................245 SIP_SRC_PORT_n ....................245...
Page 16 Table of Contents VOICE_MESSAGE_AVAILABLE ................256 SIP_INVITE_EXPIRE_n ....................257 SIP_FOVR_NORSP_n ....................257 SIP_FOVR_MAX_n ....................257 SIP_FOVR_MODE_n ....................257 SIP_FOVR_DURATION_n ..................258 SIP_ADD_ROUTE_n ....................258 SIP_REQURI_PORT_n .....................258 ADD_EXPIRES_HEADER_n ..................259 ADD_TRANSPORT_UDP_n ..................259 SIP_ADD_DIVERSION_n ..................259 TRANSFER_RECALL_TIM ..................260 SIGNAL_COMPRESSION_n ..................260 MAX_BREADTH_n ....................260 MUTIPART_BOUNDARY_DELIMITTER_n ..............260 RFC5626_KEEPALIVE_ENABLE_n .................261 RINGTONE_183_180_ENABLE_n ................261 SIP_403_REG_SUB_RTX_n ..................261 SIP_FORK_MODE_n ....................262 AKA_AUTHENTICATION_ENABLE_n ..............262 RFC2543_HOLD_ENABLE_n ...................262 SIP_HOLD_ATTRIBUTE_n ..................262...
Page 17 Table of Contents MIN_DELAY_n ......................271 NOM_DELAY_n ......................271 RTP_PORT_MIN .......................272 RTP_PORT_MAX ......................272 RTP_PTIME ......................272 RTP_TARGET_CHECK ....................272 RTCP_ENABLE_n .....................273 RTCP_INTVL_n ......................273 RTCP_SEND_BY_SDP_n ..................273 RTP_CLOSE_ENABLE_n ..................274 RTCPXR_ENABLE_n ....................274 5.3.27 SRTP Settings ......................274 SRTP_CONNECT_MODE_n ..................274 SRTP_MIX_CONFERENCE_ENABLE_n ..............275 SRTP_MIX_TRANSFER_ENABLE_n ...............275 SRTP_HELD_CALL_RTP_ENABLE .................275 5.3.28 VQ Report by PUBLISH ....................275 VQREPORT_COLLECTOR_ADDRESS ..............275 VQREPORT_COLLECTOR_PORT ................276 VQREPORT_SEND ....................276...
Page 18 Table of Contents ONHOOK_TRANSFER_ENABLE ................284 ONHOOK_HOLD_TRNS_ENABLE ................284 BLIND_TRANSFER_ENABLE ..................284 SYS_LOCK_ENABLE ....................284 SYS_LOCK_PASSWORD ..................285 PAUSE_INPUT_ENABLE ..................285 NUM_PLAN_PICKUP_DIRECT ................285 5.3.31 Flexible Key Settings ....................285 FLEX_BUTTON_FACILITY_ACTx ................285 FLEX_BUTTON_FACILITY_ARGx ................286 FLEX_BUTTON_LABELx ..................286 FLEX_BUTTON_QUICK_DIALx ................287 LONG_PRESS_KEY_SETTING_ENABLE ...............287 5.3.32 DSS Key Settings ......................287 DSS_BUTTON_FACILITY_ACTx ................287 DSS_BUTTON_FACILITY_ARGx ................288 DSS_BUTTON_LABELx ...................288 DSS_BUTTON_QUICK_DIALx .................289 5.3.33...
Page 19 Table of Contents HOLD_TONE_FRQ ....................298 HOLD_TONE_GAIN ....................298 BELL_CORE_PATTERN1_TIMING ................298 BELL_CORE_PATTERN2_TIMING ................298 BELL_CORE_PATTERN3_TIMING ................299 BELL_CORE_PATTERN4_TIMING ................299 BELL_CORE_PATTERN5_TIMING ................299 5.3.34 Call Control Settings .....................300 DEFAULT_LINE_SELECT ..................300 ANONYMOUS_CALL_ENABLE_n ................300 BLOCK_ANONYMOUS_CALL_ENABLE_n ..............300 HOTLINE_ENABLE ....................301 HOTLINE_NUMBER ....................301 HOTLINE_TIM ......................301 DISPLAY_NAME_n ....................301 VM_SUBSCRIBE_ENABLE ..................302 VM_NUMBER_n ......................302 DIAL_PLAN_n ......................302 DIAL_PLAN_NOT_MATCH_ENABLE_n ..............303 MACRODIGIT_TIM ....................303...
Page 20 Table of Contents 6 Useful Telephone Functions ...............313 Phonebook Import and Export ..................314 6.1.1 Import/Export Operation ....................316 6.1.2 Editing with Microsoft Excel ..................317 6.1.3 Exporting Data from Microsoft Outlook ................319 Dial Plan .........................320 6.2.1 Dial Plan Settings ......................320 Flexible Keys .........................322 6.3.1 Settings using Web User Interface Programming ............325 6.3.2...
Page 21: Initial Setup
Section 1 Initial Setup This section provides an overview of the setup procedures for the unit. Document Version 2015-07 Administrator Guide...
Page 22: Setup
Note • To select the display language for the unit, refer to the Operating Instructions on the Panasonic Web site (® see Introduction). • To select the display language for the Web user interface, see 4.4.1 Language Settings.
Page 23 1.1.3 Basic Network Setup Using a Static IP Address Specified by Your Network Administrator If IP addresses for network devices are specified individually by your network administrator, you will need to manually configure settings such as the IP address, subnet mask, default gateway, and DNS servers. For details about the required network settings, consult your network administrator.
Page 24 For details about the individual network settings that can be configured via the unit, refer to the Operating Instructions on the Panasonic Web site (® see Introduction). For details about configuring network settings via the Web user interface, see 4.3.1 Basic Network Settings.
Page 25: Overview Of Programming
1.1.4 Overview of Programming [ ]/[ ]: "Auto" ® • Select "Manual" to enter the addresses for DNS1 (primary DNS server) and, if necessary, DNS2 (secondary DNS server) manually, and then press To configure network settings automatically using RA [ ]/[ ]: "System Settings" ® [ ]/[ ]: "Network Settings"...
Page 26: Phone User Interface Programming
You can change the language used on the LCD. Because the language settings for the LCD of the unit are not synchronized, you must set the languages individually for the unit. For details about changing the setting, refer to the Operating Instructions on the Panasonic Web site (® see Introduction).
Page 27: Changing The Language For Web User Interface Programming
Opening/Closing the Web Port To access the Web user interface, you must open the unit’s Web port beforehand. For details, refer to the Operating Instructions on the Panasonic Web site (® see Introduction). Configuring Settings from the Unit To open the unit’s Web port [ ]/[ ]: "Basic Settings"...
Page 28 1.1.6 Web User Interface Programming To close the unit’s Web port [ ]/[ ]: "Basic Settings" ® [ ]/[ ]: "Other Option" ® [ ]/[ ]: "Embedded Web" ® [ ]/[ ]: "Off" for "Embedded Web" ® Configuring Settings from the Web User Interface To close the unit’s Web port In the Web user interface, click [Web Port Close].
Page 29: Accessing The Web User Interface
1.1.6 Web User Interface Programming Notice • Only one account can be logged in to the Web user interface at a time. If you try to access the Web user interface while someone is logged in, you will be denied access. •...
Page 30: Controls On The Window
1.1.6 Web User Interface Programming Controls on the Window The Web user interface window contains various controls for navigating and configuring settings. The following figure shows the controls that are displayed on the [Basic Network Settings] screen as an example: Note •...
Page 31: Entering Characters
1.1.6 Web User Interface Programming Button Function Cancel Discards changes. The settings on the current screen will return to the values they had before being changed. Refresh Updates the status information displayed on the screen. This button is displayed in the upper-right area of the [Network Status] and [VoIP Status] screens.
Page 32: Firmware Update
1.2.1 Firmware Update Result Message Description Applicable Screens Complete The operation has successfully completed. All screens except 4.6.7 Export Phonebook Failed (Parameter Error) The operation failed because: All screens • Some specified values are out of range or invalid. Failed (Memory Access The operation failed because: All screens •...
Page 33 1.2.1 Firmware Update For details, see Section 7 Firmware Update. Provisioning server Configuration file Firmware server Firmware A Download B Check for update C Firmware download and update Document Version 2015-07 Administrator Guide...
Page 34 1.2.1 Firmware Update Administrator Guide Document Version 2015-07...
Page 35: General Information On Provisioning
Section 2 General Information on Provisioning This section provides an overview of the configuration file programming procedures for the unit, including pre-provisioning and provisioning. Document Version 2015-07 Administrator Guide...
Page 36: Pre-Provisioning
2.1.3 Server Address Formats 2.1 Pre-provisioning 2.1.1 What is Pre-provisioning? Pre-provisioning is an auto-provisioning mechanism that automatically obtains the server address saved in the configuration file administered by the carrier or distributor. There are two methods for automatically obtaining the server address saved in the configuration file. SIP PnP The phone multicasts a SIP SUBSCRIBE message and obtains a provisioning server address via a SIP NOTIFY message.
Page 37: Obtaining A Provisioning Server Address Via Sip Pnp
Macro Expansion {MODEL} If the URL contains {MODEL}, it will be replaced with the device’s model name. Example: {MODEL} ® KX-HDV230 {fwver} If the URL contains {fwver}, it will be replaced with the device’s firmware version. Example: {fwver} ® 01.000 Note •...
Page 38: Obtaining A Provisioning Server Address From Dhcp Options
2.1.5 Obtaining a Provisioning Server Address from DHCP Options CFG_PRODUCT_FILE_PATH CFG_MASTER_FILE_PATH Provisioning server URL formats Format: <scheme>://<user>:<password>@<host>:<port>/<url-path>/<file name> <scheme> Mandatory Protocol (TFTP/FTP/HTTP/HTTPS) <user> Optional User name <password> Optional Password <host> Mandatory IP Address or Domain <port> Optional Port number <url-path> Optional Full path of the resource <file name>...
Page 39 2.1.5 Obtaining a Provisioning Server Address from DHCP Options KX-HDV230 DHCP Server Pre-provisioning Server KX-HDV230.cfg DHCP DISCOVER DHCP OFFER DHCP REQUEST DHCP ACK TFTP {MODEL}.cfg 200OK Obtain provisioning server information CFG_STANDARD_FILE_PATH CFG_PRODUCT_FILE_PATH CFG_MASTER_FILE_PATH Format for pre-provisioning files obtained from DHCP option 67 Format: <path>/<file name>...
Page 40 2.1.5 Obtaining a Provisioning Server Address from DHCP Options <user> Optional User name <password> Optional Password <host> Mandatory IP Address or Domain <port> Optional Port number <url-path> Optional Full path of the resource The obtained file is the <path>/<file name> set in DHCP option 67. If DHCP option 67 is not set, {MODEL}.cfg is obtained.
Page 41 2.1.5 Obtaining a Provisioning Server Address from DHCP Options Note • DHCP option 17 is enabled in the initial state and can be enabled and disabled from the configuration parameters ("DHCPV6_OPTION17_PROV_ENABLE"). KX-HDV230 DHCP Server Pre-provisioning Server KX-HDV230.cfg DHCPv6 REQUEST DHCPv6 REPLY TFTP {MODEL}.cfg...
Page 42: Provisioning
IP addresses of the DNS and NTP (Network Time Protocol) servers managed by your phone system dealer/ service provider. This configuration file is used by all the units. Example of the configuration file’s URL: http://prov.example.com/Panasonic/ConfigCommon.cfg Administrator Guide Document Version 2015-07...
Page 43 The same number of configuration files as models being used on the network are stored on the provisioning server, and units with the same model name download the corresponding configuration file. Example of the configuration file’s URL: http://prov.example.com/Panasonic/Config{MODEL}.cfg Note • When a unit requests the configuration file, "{MODEL}" is replaced by the model name of the unit.
Page 44: Downloading Configuration Files
Confirm that the provisioning server’s IP address/FQDN and directory are correct, and store the configuration files in the directory (e.g., http://provisioning.example.com/Panasonic/Config_Sample.cfg). Enter the IP address of the unit into the PC’s Web browser (® see 1.1.6.3 Before Accessing the Web User Interface).
Page 45 The configuration files are downloaded at specified intervals of time, set in minutes. In the example below, the unit has been programmed to download configuration files from the provisioning server every 3 days (4320 minutes). CFG_CYCLIC_INTVL="4320" KX-HDV230 Provisioning Server A Power on B 3 days later C 6 days later...
Page 46 2.2.4 Downloading Configuration Files Download Timing Explanation The configuration files are downloaded periodically under the following conditions: • In the configuration file, add the line, CFG_CYCLIC="Y". – Set an interval (minutes) by specifying "CFG_CYCLIC_INTVL". • In the Web user interface: –...
Page 47 Explanation At a specified time each day After the unit is powered on, it will download configuration files once per day at the specified time. CFG_RESYNC_TIME="02:00" KX-HDV230 Provisioning Server A power on at 12:00 B 02:00 C 02:00 : Check : Download •...
Page 48: Provisioning Server Setting Example
Panasonic/Config{MAC}.cfg" • CFG_MASTER_FILE_PATH="http://prov.example.com/ Panasonic/ConfigCommon.cfg" Directory on the provisioning Create the "Panasonic" directory just under the HTTP root directory of the server containing the provisioning server. configuration files File name of configuration Store the following configuration files in the "Panasonic" directory.
Page 49: Encryption
2.2.6 Encryption Example Provisioning Direction from the Server The following figure shows an example NOTIFY message from the server, directing the units to perform provisioning. The text "check-sync" is specified for "CFG_RESYNC_FROM_SIP". NOTIFY sip:1234567890@sip.example.com SIP/2.0 Via: SIP/2.0/UDP xxx.xxx.xxx.xxx:5060;branch=abcdef-ghijkl From: sip:prov@sip.example.com To: sip:1234567890@sip.example.com Date: Wed, 1 Jan 2014 01:01:01 GMT Call-ID: 123456-1234567912345678...
Page 50: Priority Of Setting Methods
2.3 Priority of Setting Methods To decrypt configuration files, the unit uses the encryption key registered to it beforehand. The unit determines the encryption status by checking the extension of the downloaded configuration file. For details about encrypting configuration files, contact the appropriate person in your organization. Extension of Configuration Configuration File Parameters Used for Decrypting File...
Page 51: Configuration File Specifications
To prevent the designated character sequence being altered by chance, it is recommended that the configuration file starts with the comment line shown below: # Panasonic SIP Phone Standard Format File # DO NOT CHANGE THIS LINE! • Configuration files must end with an empty line.
Page 52 "VM_NUMBER_6": for line 6 Note • The number of lines available varies depending on the phone being used, as follows: – KX-HDV230: 1–6 • Some parameter values can be specified as "empty" to set the parameter values to empty. Example: NTP_ADDR=""...
Page 53: Configuration File Examples
If an error occurs when attempting to set the IP Mode to IPv6, see To configure IP Mode (IPv4, IPv6, IPv4&IPv6) in Configuring the Network Settings of the Unit. 2.5 Configuration File Examples The following examples of configuration files are provided on the Panasonic Web site (® see Introduction). • Simplified Example of the Configuration File •...
Page 54: Example With Incorrect Descriptions
The following listing shows an example of a configuration file that contains incorrect formatting: An improper description is entered in the first line. A configuration file must start with the designated character sequence "# Panasonic SIP Phone Standard Format File #". Comment lines start in the middle of the lines.
Page 55: Phone User Interface Programming
Section 3 Phone User Interface Programming This section explains how to configure the unit by entering direct commands through the phone user interface. Document Version 2015-07 Administrator Guide...
Page 56: Phone User Interface Programming
3.1.1 Opening/Closing the Web Port 3.1 Phone User Interface Programming This section provides information about the features that can be configured directly from the unit, but that are not mentioned in the Operating Instructions. 3.1.1 Opening/Closing the Web Port To access the Web user interface, you must open the unit’s Web port beforehand. To open the unit’s Web port [ ]/[ ]: "Basic Settings"...
Page 57: Web User Interface Programming
Section 4 Web User Interface Programming This section provides information about the settings available in the Web user interface. Document Version 2015-07 Administrator Guide...
Page 58: Web User Interface Setting List
4.1 Web User Interface Setting List 4.1 Web User Interface Setting List The following tables show all the settings that you can configure from the Web user interface and the access levels. For details about each setting, see the reference pages listed. For details about setting up Web user interface programming, see 1.1.6 Web User Interface Programming.
Page 59 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. VoIP Status VoIP Status Line No. ü ü Page 75 Phone Number ü ü Page 75 VoIP Status ü ü Page 75 The access levels are abbreviated as follows: U: User;...
Page 60 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. PC Priority ü Page 83 VLAN Enable VLAN ü Page 84 IP Phone VLAN ID ü Page 84 IP Phone Priority ü Page 84 PC VLAN ID Page 84 ü...
Page 61 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. Name Attributes ü Page 93 Number Attributes ü Page 93 Display Name ü Page 93 Enable DNS SRV lookup ü Page 93 Xtended Service Xtended Service Enable Xtended Service Page 94 ü...
Page 62 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. Shortcut Key Settings Soft Key A (Left) ü Page 102 Soft Key B (Center) ü Page 102 Soft Key C (Right) ü Page 102 XML Phonebook LDAP URL ü...
Page 63 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. User Password User Password Current Password ü ü Page 110 Settings New Password ü ü Page 110 Confirm New Password ü ü Page 111 Admin Password Admin Password Current Password ü...
Page 64 4.1 Web User Interface Setting List VoIP Access Level Menu Item Section Title Setting Ref. SIP Settings User Agent User Agent ü Page 119 NAT Identity Enable Rport (RFC 3581) ü Page 120 Enable Port Punching for SIP ü Page 120 Enable Port Punching for ü...
Page 65 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. Enable 100rel (RFC 3262) ü Page 127 Enable SSAF (SIP Source ü Page 128 Address Filter) Enable c=0.0.0.0 Hold (RFC ü Page 128 2543) Transport Protocol ü...
Page 66 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. DTMF Type ü Page 134 Advanced RTP Packet QoS (DSCP) ü Page 134 RTCP Packet QoS (DSCP) ü Page 134 Enable RTCP ü Page 135 Enable RTCP-XR Page 135 ü...
Page 67 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. Park Retrieve Soft Key ü Page 140 Directed Call Pickup ü Page 141 Emergency Call Phone 1–5 ü Page 141 Numbers Call Rejection Phone 1–30 ü ü...
Page 68 4.1 Web User Interface Setting List Access Level Menu Item Section Title Setting Ref. Hotline Settings Hotline Enable ü Page 148 Hotline Number ü ü Page 148 Hotline Delay ü Page 148 Flexible Key Flexible Key Settings No. 1–24 – –...
Page 69: Status
4.2 Status Maintenance Access Level Menu Item Section Title Setting Ref. Provisioning Provisioning Standard File URL ü Page 158 Maintenance Maintenance Product File URL ü Page 158 Master File URL ü Page 158 Cyclic Auto Resync ü Page 159 Resync Interval ü...
Page 70: Version Information
4.2.1 Version Information 4.2.1 Version Information This screen allows you to view the current version information such as the model number and the firmware version of the unit. 4.2.1.1 Version Information Model Description Indicates the model number of the unit (reference only). Value Range Model number Operating Bank...
Page 71: Network Status
4.2.2 Network Status 4.2.2 Network Status This screen allows you to view the current network information of the unit, such as the MAC address, IP address, Ethernet port status, etc. Clicking [Refresh] updates the information displayed on the screen. 4.2.2.1 Network Common MAC Address Description Indicates the MAC address of the unit (reference only).
Page 72: Ipv4
4.2.2 Network Status 4.2.2.2 IPv4 Connection Mode Description Indicates whether the IP address of the unit is assigned automatically (DHCP) or manually (static) (reference only). • Value Range DHCP • Static IP Address Description Indicates the currently assigned IP address of the unit (reference only). Value Range IP address Subnet Mask...
Page 73: Dns2
4.2.2 Network Status DNS2 Description Indicates the specified IP address of the secondary DNS server (reference only). Note • If the secondary DNS server address is not specified, this field will be left blank. Value Range IP address of the secondary DNS server 4.2.2.3 IPv6 Connection Mode Description...
Page 74: Dns1
4.2.2 Network Status DNS1 Description Indicates the specified IP address of the primary DNS server (reference only). Note • If the primary DNS server address is not specified, this field will be left blank. Value Range IP address of the primary DNS server DNS2 Description Indicates the specified IP address of the secondary DNS server...
Page 75: Pc Port Vlan Priority
4.2.3 VoIP Status Value Range 0–4094 PC Port VLAN Priority Description Indicates the priority number (reference only) for the PC. Value Range 0–7 4.2.3 VoIP Status This screen allows you to view the current VoIP status of each line’s unit. Clicking [Refresh] updates the information displayed on the screen.
Page 76: Network
4.3.1 Basic Network Settings Value Range • Registered: The unit has been registered to the SIP server, and the line can be used. • Registering: The unit is being registered to the SIP server, and the line cannot be used. •...
Page 77: Ip Addressing Mode
4.3.1 Basic Network Settings "Embedded Web" on the unit (® see Opening/Closing the Web Port in 1.1.6.3 Before Accessing the Web User Interface). 4.3.1.1 IP Addressing Mode IP Addressing Mode Description Selects the IP addressing mode. Value Range • IPv4 •...
Page 78: Dhcp Host Name
4.3.1 Basic Network Settings DHCP Host Name Description Specifies the host name to option12 in DHCPv4 or option15 in DHCPv6. Note • This setting is available only when [Connection Mode] is set to [DHCP]. Value Range Max. 64 characters Default Value {MODEL} Configuration File Reference DHCP_HOST_NAME (Page 188)
Page 79: Auto Dns Via Dhcp
4.3.1 Basic Network Settings Default Value Not stored. Configuration File Reference STATIC_GATEWAY (Page 187) Auto DNS via DHCP Description Selects whether to enable or disable the DNS server obtained by DHCPv4. Note • This setting is available only when [Connection Mode] is set to [DHCP].
Page 80: Ip Address
4.3.1 Basic Network Settings Default Value DHCP Configuration File Reference CONNECTION_TYPE_IPV6 (Page 189) IP Address Description Specifies the IP address for IPv6. Note • This setting is available only when [Connection Mode] is set to [Static]. Value Range Max. 39 characters n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available] Default Value Not stored.
Page 81: Auto Dns Via Dhcp
4.3.2 Ethernet Port Settings Auto DNS via DHCP Description Selects whether to enable or disable the DNS server obtained by DHCPv6. Note • This setting is available only when [Connection Mode] is set to [DHCP]. Value Range • Yes: Use DNS obtained by DHCPv6 •...
Page 82: Link Speed/Duplex Mode
4.3.2 Ethernet Port Settings Note • When you change the settings on this screen and click [Save], after the message "Complete" has been displayed, the unit will restart automatically with the new settings applied. If a unit is on a call when "Complete"...
Page 83: Lldp
4.3.2 Ethernet Port Settings Default Value Auto Negotiation Configuration File Reference PHY_MODE_PC (Page 191) 4.3.2.2 LLDP Enable LLDP Description Selects whether to enable or disable the LLDP-MED feature. Note • You should specify "Yes" for only one of "Enable LLDP", or "Enable VLAN".
Page 84: Vlan
4.3.2 Ethernet Port Settings Default Value Configuration File Reference LLDP_VLAN_PRI_PC (Page 193) 4.3.2.3 VLAN Enable VLAN Description Selects whether to use the VLAN feature to perform VoIP communication securely. Note • You should specify "Yes" for only one of "Enable LLDP", or "Enable VLAN".
Page 85: Pc Priority
4.3.3 HTTP Client Settings Value Range 0–4094 Default Value Configuration File Reference VLAN_ID_PC (Page 192) PC Priority Description Selects the priority for the PC. Value Range 0–7 Default Value Configuration File Reference VLAN_PRI_PC (Page 192) 4.3.3 HTTP Client Settings This screen allows you to change the HTTP client settings for the unit in order to access the HTTP server of your phone system and download configuration files.
Page 86: Http User Agent
4.3.3 HTTP Client Settings Value Range • HTTP/1.0 • HTTP/1.1 Note • For this unit, it is strongly recommended that you select [HTTP/ 1.0]. However, if the HTTP server does not function well with HTTP/1.0, try changing the setting [HTTP/1.1]. Default Value HTTP/1.0 Configuration File Reference...
Page 87: Proxy Server
4.3.3 HTTP Client Settings 4.3.3.2 Proxy Server Enable Proxy Description Selects whether to enable or disable the HTTP proxy feature. Value Range • • Default Value Configuration File Reference HTTP_PROXY_ENABLE (Page 201) Proxy Server Address Description Specifies the IP address or FQDN of the proxy server. Value Range Max.
Page 88: Stun Settings
4.3.4 STUN Settings 4.3.4 STUN Settings This screen allows you to change the STUN Settings. 4.3.4.1 STUN STUN: Simple Traversal of UDP through NATs Server Address Description Specifies the host name or IP address of the STUN server for the CPE to send Binding Requests.
Page 89: Binding Interval
4.3.5 Multicast Paging Settings Binding Interval Description Specifies the interval of the sending binding request. Value Range 60–86400 Default Value Configuration File Reference STUN_INTVL (Page 240) 4.3.5 Multicast Paging Settings This screen allows you to change the Multicast Paging Settings for each channel Group. 4.3.5.1 Multicast Paging IPv4 Address (Group 1–5) Description...
Page 90: Ipv6 Address (Group 1-5)
4.3.5 Multicast Paging Settings IPv6 Address (Group 1–5) Description Specifies the IPv6 address for multi-cast paging for each channel group. {Priority: Group 5 > Group 4 > Group 3, Group2, Group1 (depending on the configuration)} Value Range FF00::/8 Default Value Not stored.
Page 91: Ldap Settings
4.3.6 LDAP Settings Configuration File Reference MPAGE_SEND_ENABLEm (Page 229) 4.3.6 LDAP Settings This screen allows you to change the LDAP Settings. 4.3.6.1 LDAP Enable LDAP Description Selects whether to enable or disable the LDAP service. Value Range • • Default Value Configuration File Reference LDAP_ENABLE (Page 219) Server Address...
Page 92: Port
4.3.6 LDAP Settings Default Value Not stored. Configuration File Reference LDAP_SERVER (Page 219) Port Description Specifies the port of server. Value Range 1–65535 Default Value Configuration File Reference LDAP_SERVER_PORT (Page 220) User ID Description Specifies the authentication ID required to access the LDAP server. Value Range Max.
Page 93: Number Filter
4.3.6 LDAP Settings Default Value (|(cn=%)(sn=%)) Configuration File Reference LDAP_NAME_FILTER (Page 221) Number Filter Description Specifies the number filter which is the search criteria for number look Value Range Max. 256 characters Default Value (|(telephoneNumber=%)(mobile =%)(homePhone =%)) Configuration File Reference LDAP_NUMB_FILTER (Page 221) Name Attributes Description...
Page 94: Xtended Service Settings
4.3.7 Xtended Service Settings Value Range • • Default Value Configuration File Reference LDAP_DNSSRV_ENABLE (Page 219) 4.3.7 Xtended Service Settings This screen allows you to change the Xtended Service Settings. 4.3.7.1 Xtended Service Enable Xtended Service Description Selects whether to enable or disable the Xsi service. Value Range •...
Page 95: Server Address
4.3.7 Xtended Service Settings Server Address Description Specifies the IP address or FQDN of the Xsi server. Value Range Max. 256 characters Default Value Not stored. Configuration File Reference XSI_SERVER (Page 215) Port Description Specifies the port of the Xsi server. Value Range 1–65535 Default Value...
Page 96: Enable Phonebook (Line 1-6)
4.3.7 Xtended Service Settings Enable Phonebook (Line 1–6) Description Selects whether to enable or disable the Xsi phonebook service. Value Range • • Default Value Configuration File Reference XSI_PHONEBOOK_ENABLE_n (Page 216) Phonebook Type (Line 1–6) Description Selects the type of Xsi phonebook. •...
Page 97: Uc Settings
4.3.8 UC Settings 4.3.8 UC Settings This screen allows you to change the UC Settings. 4.3.8.1 Presence Feature Enable UC Description Selects whether to enable the UC service. Value Range • • Default Value Configuration File Reference UC_ENABLE (Page 217) Server Address Description Specifies the IP address or FQDN of the XMPP server.
Page 98: User Id
4.3.8 UC Settings Value Range 1–65535 Default Value 5222 Configuration File Reference XMPP_PORT (Page 218) User ID Description Specifies the authentication ID required to access the UC server. Value Range Max. 128 characters Default Value Not stored. Configuration File Reference UC_USERID (Page 217) Password Description...
Page 99: Xml Application Settings
4.3.9 XML Application Settings 4.3.9 XML Application Settings This screen allows you to configure the various URLs used with the XML application feature. 4.3.9.1 XML Application Enable XMLAPP Description Selects whether to enable or disable the XML application feature. Value Range •...
Page 100: Password
4.3.9 XML Application Settings Password Description Specifies the authentication password used to access the XML application server. Value Range Max. 128 characters Default Value Not stored. Configuration File Reference XMLAPP_USERPASS (Page 210) Local XML Port Description Specifies the local HTTP port for XML application. Value Range 1–65535 Default Value...
Page 101: Talking Url
4.3.9 XML Application Settings Talking URL Description Specifies the URL that is accessed when the unit is on a call, to check for XML data. Value Range Max. 256 characters Default Value Not stored. Configuration File Reference XMLAPP_TALKING_URL (Page 212) Making Call URL Description Specifies the URL that is accessed when the unit makes a call, to check...
Page 102: Shortcut Key Settings
4.3.9 XML Application Settings Configuration File Reference XMLAPP_FFKEY_ENABLE (Page 214) 4.3.9.2 Shortcut Key Settings Soft Key A (Left) Description Specifies whether to enable the XML application or operate the telephone normally, when the corresponding button is pressed during standby mode. Value Range •...
Page 103: User Id
4.3.9 XML Application Settings Default Value Not stored. Configuration File Reference XMLAPP_LDAP_URL (Page 210) User ID Description Specifies the authentication ID required to access the LDAP server. Value Range Max. 128 characters Default Value Not stored. Configuration File Reference XMLAPP_LDAP_USERID (Page 210) Password Description Specifies the authentication password used to access the LDAP server.
Page 104: Acd Settings [Line1]-[Line6]
4.3.10 ACD Settings [Line1]–[Line6] 4.3.10 ACD Settings [Line1]–[Line6] Enable ACD Description Selects whether to enable the ACD. Value Range • • Default Value Configuration File Reference ACD_ENABLE_n (Page 223) Administrator Guide Document Version 2015-07...
Page 105: Call Center Settings [Line1]-[Line6]
4.3.11 Call Center Settings [Line1]–[Line6] 4.3.11 Call Center Settings [Line1]–[Line6] Enable Call Center Description Selects whether to add menu items for Call Center. Value Range • • Default Value Configuration File Reference CALL_CENTER_ENABLE_n (Page 223) Disposition Code Description Selects whether to enable the Disposition Code. Value Range •...
Page 106: Hoteling Event
4.4 System Default Value Configuration File Reference CC_CUSTOMER_ORG_TRACE_ENABLE_n (Page 224) Hoteling Event Description Selects whether to enable the Hoteling Event. Value Range • • Default Value Configuration File Reference CC_HOTELING_EVENT_n (Page 225) - User ID Description Specifies the authentication ID required to access the Hoteling service. Value Range Max.
Page 107: Language Settings
4.4.1 Language Settings 4.4.1 Language Settings This screen allows you to select the language used for the Web user interface. The language setting is only applicable when you log in to the Web user interface as User. Note • If you change the language while logged in to the Web user interface with the User account, the language will be changed after the message "Complete"...
Page 108: Web Language
4.4.1 Language Settings Value Range • en: English • es: Spanish • fr: French • de: German • it: Italian • da: Danish • nl: Dutch • sv: Swedish • fi: Finnish • el: Greek • hu: Hungarian • pt: Portuguese •...
Page 109: Language Settings
4.4.1 Language Settings Value Range • en: English • es: Spanish • fr: French • de: German • it: Italian • nl: Dutch • el: Greek • hu: Hungarian • pt: Portuguese • pl: Polish • sk: Slovakian • cs: Czech •...
Page 110: User Password Settings
4.4.2 User Password Settings 4.4.2 User Password Settings This screen allows you to change the password used to authenticate the User account when logging in to the Web user interface. Note • For security reasons, the characters entered for the password are masked by special characters, which differ depending on the Web browser.
Page 111: Confirm New Password
4.4.3 Admin Password Settings Default Value Not stored. Note • When a user logs in to the Web user interface for the first time, after clicking OK on the authentication dialog box, the [Initial User Password Settings] screen is displayed automatically to make the user set a password.
Page 112: Admin Password
4.4.3 Admin Password Settings 4.4.3.1 Admin Password Current Password Description Specifies the current password to use to authenticate the Administrator account when logging in to the Web user interface. Value Range 6–64 characters (except !, ", #, $, %, &, ', (, ), *, +, ,, /, :, ;, <, =, >, ?, [, ], ^, `, {, |, }, ~, \ and space) Default Value adminpass...
Page 113: Time Adjust Settings
4.4.4 Time Adjust Settings 4.4.4 Time Adjust Settings This screen allows you to enable automatic clock adjustment using an NTP server and configure the settings for DST (Daylight Saving Time), also known as Summer Time. 4.4.4.1 Synchronization (Synchronisation) Server Address Description Specifies the IP address or FQDN of NTP server.
Page 114: Daylight Saving Time (Summer Time)
4.4.4 Time Adjust Settings Default Value Configuration File Reference TIME_ZONE (Page 232) 4.4.4.3 Daylight Saving Time (Summer Time) Enable DST (Enable Summer Time) Description Selects whether to enable Daylight Saving Time (Summer Time). Value Range • • Default Value Configuration File Reference DST_ENABLE (Page 233) DST Offset (Summer Time Offset) Description...
Page 115: Day Of Week
4.4.4 Time Adjust Settings Day of Week Using the 2 following settings, specify on which day of the selected month DST (Summer Time) starts. For example, to specify the second Sunday, select [Second] and [Sunday]. Description Selects the number of the week on which DST (Summer Time) starts. •...
Page 116: Day Of Week
4.4.4 Time Adjust Settings Value Range • January • February • March • April • • June • July • August • September • October • November • December Default Value October Configuration File Reference DST_STOP_MONTH (Page 235) Day of Week Using the 2 following settings, specify on which day of the selected month DST (Summer Time) ends.
Page 117: Time
4.4.5 Advanced Settings Time Description Specifies the end time of DST (Summer Time) in minutes after 12:00 Value Range 0–1439 (min) Default Value Configuration File Reference DST_STOP_TIME (Page 236) 4.4.5 Advanced Settings This screen allows you to change the Soft Key function settings. 4.4.5.1 Soft Key during IDLE Status Soft Key A (Left) Description...
Page 118: Soft Key B (Center)
4.4.5 Advanced Settings Soft Key B (Center) Description Selects soft key (B) during IDLE state. Value Range • Phonebook • Menu • Outgoing Call Log • Incoming Call Log • Redial • Page (Used when performing Multicast Paging) Default Value Menu Configuration File Reference IDLE_SOFT_KEY_B (Page 305)
Page 119: Password For Unlocking
4.5.1 SIP Settings Password for Unlocking Description Specifies the password for unlocking the unit. Value Range Null, 4 digits (0–9) Default Value Not stored. Configuration File Reference SYS_LOCK_PASSWORD (Page 285) 4.5 VoIP This section provides detailed descriptions about all the settings classified under the [VoIP] tab. 4.5.1 SIP Settings This screen allows you to change the SIP settings that are common to all lines.
Page 120: Nat Identity
• If "{fwver}" is included in this field, it will be replaced with the firmware version of the unit. Default Value Panasonic-{MODEL}/{fwver} ({mac}) Configuration File Reference SIP_USER_AGENT (Page 241) 4.5.1.2 NAT Identity Enable Rport (RFC 3581) Description Selects whether to add the 'rport' parameter to the top Via header field value of requests generated.
Page 121: Sip Settings [Line 1]-[Line 6]
4.5.2 SIP Settings [Line 1]–[Line 6] Configuration File Reference RTP_PORT_PUNCH_INTVL (Page 241) 4.5.2 SIP Settings [Line 1]–[Line 6] This screen allows you to change the SIP settings that are specific to each line. 4.5.2.1 Basic Phone Number Description Specifies the phone number to use as the user ID required for registration to the SIP registrar server.
Page 122: Registrar Server Port
4.5.2 SIP Settings [Line 1]–[Line 6] Configuration File Reference SIP_RGSTR_ADDR_n (Page 242) Registrar Server Port Description Specifies the port number to use for communication with the SIP registrar server. Value Range 1–65535 Default Value 5060 Configuration File Reference SIP_RGSTR_PORT_n (Page 243) Proxy Server Address Description Specifies the IP address or FQDN of the SIP proxy server.
Page 123: Outbound Proxy Server Address
4.5.2 SIP Settings [Line 1]–[Line 6] Configuration File Reference SIP_PRSNC_PORT_n (Page 244) Outbound Proxy Server Address Description Specifies the IP address or FQDN of the SIP outbound proxy server. Value Range Max. 256 characters Default Value Not stored. Configuration File Reference SIP_OUTPROXY_ADDR_n (Page 244) Outbound Proxy Server Port Description...
Page 124: Advanced
4.5.2 SIP Settings [Line 1]–[Line 6] Configuration File Reference SIP_PASS_n (Page 245) 4.5.2.2 Advanced SIP Packet QoS (DSCP) Description Specifies the DSCP (Differentiated Services Code Point) level of DiffServ applied to SIP packets. Value Range 0–63 Default Value Configuration File Reference DSCP_SIP_n (Page 246) Enable DNS SRV lookup Description...
Page 125: Srv Lookup Prefix For Tcp
4.5.2 SIP Settings [Line 1]–[Line 6] SRV lookup Prefix for TCP Description Specifies a prefix to add to the domain name when performing a DNS SRV lookup using TCP. Note • This setting is available only when [Enable DNS SRV lookup] is set to [Yes].
Page 126: Sip Uri
4.5.2 SIP Settings [Line 1]–[Line 6] SIP URI Description Specifies the unique ID used by the SIP registrar server, which consists of "sip:", a user part, the "@" symbol, and a host part, for example, "sip:user@example.com", "2405551111_1". Note • When registering using a user ID that is not a phone number, you should use this setting.
Page 127: Register Expires Timer
4.5.2 SIP Settings [Line 1]–[Line 6] REGISTER Expires Timer Description Specifies the length of time, in seconds, that the registration remains valid. This value is set in the "Expires" header of the REGISTER request. Value Range 1–4294967295 Default Value 3600 Configuration File Reference REG_EXPIRE_TIME_n (Page 247) Enable Session Timer (RFC 4028)
Page 128: Enable Ssaf (Sip Source Address Filter)
4.5.2 SIP Settings [Line 1]–[Line 6] Enable SSAF (SIP Source Address Filter) Description Selects whether to enable SSAF for the SIP servers (registrar server, proxy server, and presence server). Value Range • • Default Value Configuration File Reference SIP_DETECT_SSAF_n (Page 255) Enable c=0.0.0.0 Hold (RFC 2543) Description Selects whether to enable the RFC 2543 Call Hold feature on this line.
Page 129: Voip Settings
4.5.3 VoIP Settings 4.5.3 VoIP Settings This screen allows you to change the VoIP settings that are common to all lines. 4.5.3.1 RTP RTP Packet Time Description Selects the interval, in milliseconds, between transmissions of RTP packets. Value Range • •...
Page 130: Maximum Rtp Port Number
4.5.3 VoIP Settings Maximum RTP Port Number Description Specifies the highest port number that the unit will use for RTP packets. Value Range 1424–59998 (even number only) Default Value 20000 Configuration File Reference RTP_PORT_MAX (Page 272) Telephone-event Payload Type Description Specifies the RFC 2833 payload type for DTMF tones.
Page 131: Alert Report Trigger
4.5.3 VoIP Settings Value Range • Disable • End of Session Report Using PUBLISH • Interval report Using PUBLISH • Alert Report Using PUBLISH Default Value Disable Configuration File Reference VQREPORT_SEND (Page 276) Alert Report Trigger Description Selects the trigger to notify the VQ report. Value Range •...
Page 132: Threshold Delay (Warning)
4.5.4 VoIP Settings [Line 1]–[Line 6] Threshold Delay (Warning) Description Specifies the criteria (warning) to send the VQ report when a delay occurs. Value Range 0–2000 Default Value Configuration File Reference ALERT_REPORT_DELAY_WARNING (Page 277) 4.5.4 VoIP Settings [Line 1]–[Line 6] This screen allows you to change the VoIP settings that are specific to each line.
Page 133: Pcma (Enable)
4.5.4 VoIP Settings [Line 1]–[Line 6] Value Range 1–255 Default Value Configuration File Reference CODEC_PRIORITYx_n (Page 268) PCMA (Enable) Description Selects whether to enable the PCMA codec for voice data transmission. Value Range • • Default Value Configuration File Reference CODEC_ENABLEx_n (Page 268) PCMA (Priority) Description...
Page 134: Pcmu (Priority)
4.5.4 VoIP Settings [Line 1]–[Line 6] Value Range • • Default Value Configuration File Reference CODEC_ENABLEx_n (Page 268) PCMU (Priority) Description Specifies the numerical order usage priority for the PCMU codec. Value Range 1–255 Default Value Configuration File Reference CODEC_PRIORITYx_n (Page 268) DTMF Type Description Selects the method for transmitting DTMF (Dual Tone Multi-Frequency)
Page 135: Enable Rtcp
4.5.4 VoIP Settings [Line 1]–[Line 6] Default Value Configuration File Reference DSCP_RTCP_n (Page 270) Enable RTCP Description Selects whether to enable or disable RTCP. Value Range • • Default Value Configuration File Reference RTCP_ENABLE_n (Page 273) Enable RTCP-XR Description Selects whether to enable or disable RTCP-XR. Value Range •...
Page 136: Enable Mixed Srtp & Rtp By Conference
4.6 Telephone Enable Mixed SRTP & RTP by Conference Description Selects whether to allow conferences where each participant can use either SRTP or RTP. Value Range • • Default Value Configuration File Reference SRTP_MIX_CONFERENCE_ENABLE_n (Page 275) Enable Mixed SRTP & RTP by Transfer Description Selects whether to allow call transfers between a user who is using SRTP and a user who is using RTP.
Page 137: Call Control
4.6.1 Call Control 4.6.1 Call Control This screen allows you to configure various call features that are common to all lines. 4.6.1.1 Call Control Send SUBSCRIBE to Voice Mail Server Description Selects whether to send the SUBSCRIBE request to a voice mail server.
Page 138: Conference Server Uri
4.6.1 Call Control Conference Server URI Description Specifies the URI for a conference server, which consists of "sip:", a user part, the "@" symbol, and a host part, for example, "sip:conference@example.com". Note • Availability depends on your phone system. Value Range Max.
Page 139: International Call Prefix
4.6.1 Call Control Value Range • Yes: # is treated as the end of dialing delimiter. • No: # is treated as a regular dialed digit. Default Value Configuration File Reference POUND_KEY_DELIMITER_ENABLE (Page 281) International Call Prefix Description Specifies the number to be shown in the place of the first "+" symbol when the phone number for incoming international calls contains "+".
Page 140: Call Park Number
4.6.1 Call Control Value Range • Line 1 • Line 2 • Line 3 • Line 4 • Line 5 • Line 6 Default Value Line 1 Configuration File Reference DEFAULT_LINE_SELECT (Page 300) Call Park Number Description Specifies the call parking number. Value Range 0–4 digits (0–9, *, #) Default Value...
Page 141: Directed Call Pickup
4.6.1 Call Control Value Range • Not Use • Soft Key A (Left) • Soft Key B (Center) • Soft Key C (Right) Default Value Not Use Configuration File Reference IDLE_SOFT_KEY_PARK_RETRIEVING (Page 283) Directed Call Pickup Description Specifies the feature number assigned to a BLF for performing call pickup.
Page 142: Call Control [Line 1]-[Line 6]
4.6.2 Call Control [Line 1]–[Line 6] 4.6.2 Call Control [Line 1]–[Line 6] This screen allows you to configure various call features that are specific to each line. 4.6.2.1 Call Features Display Name Description Specifies the name to display as the caller on the other party’s phone when you make a call.
Page 143: Enable Anonymous Call
4.6.2 Call Control [Line 1]–[Line 6] Value Range Max. 32 characters Default Value Not stored. Configuration File Reference VM_NUMBER_n (Page 302) Enable Anonymous Call Description Selects whether to make calls without transmitting the phone number to the called party. Value Range •...
Page 144: Enable Call Forwarding Always
4.6.2 Call Control [Line 1]–[Line 6] Enable Call Forwarding Always Description Selects whether to forward all incoming calls to a specified destination. Value Range • • Default Value Forwarding Number (Always) Description Specifies the phone number of the destination to forward all incoming calls to.
Page 145: Forwarding Number (No Answer)
4.6.2 Call Control [Line 1]–[Line 6] Forwarding Number (No Answer) Description Specifies the phone number of the destination to forward calls to when a call is not answered after it has rung a specified number of times. Value Range Max. 32 characters Default Value Not stored.
Page 146: Enable Call Park Notification
4.6.2 Call Control [Line 1]–[Line 6] Configuration File Reference FWD_DND_SYNCHRO_ENABLE_n (Page 307) Enable Call Park Notification Description Selects whether to respond to call park notifications from the server. Value Range • • Default Value Configuration File Reference CALLPARK_NOTIFICATION_ENABLE_n (Page 306) Enable Click to Call Description Selects whether to enable Click to Dial/Answer/Hold functions.
Page 147: Dial Plan
4.6.3 Hotline Settings 4.6.2.2 Dial Plan Dial Plan (max 1000 columns) Description Specifies a dial format, such as specific phone numbers, that control which numbers can be dialed or how to handle the call when making a call. For details, see 6.2 Dial Plan. Value Range Max.
Page 148: Hotline
4.6.4 Flexible Key Settings (No. 1–24) 4.6.3.1 Hotline Enable Description Selects whether to enable or disable the Hot line feature. Value Range • • Default Value Configuration File Reference HOTLINE_ENABLE (Page 301) Hotline Number Description Specifies the Hot line number. Value Range Max.
Page 149: Flexible Key Settings
4.6.4 Flexible Key Settings (No. 1–24) 4.6.4.1 Flexible Key Settings Type Description Selects the feature to be assigned to each flexible key. Value Range • One Touch Dial • • Line • • Wrap Up • Line Status • Call Forward •...
Page 150: Tone Settings
4.6.5 Tone Settings 4.6.5 Tone Settings This screen allows you to configure the dual-tone frequencies and ringtone patterns of each tone. 4.6.5.1 Dial Tone Tone Frequencies Description Specifies the dual-tone frequencies, in hertz, of dial tones using 2 whole numbers separated by a comma. Value Range 0, 200–2000 (0: No tone) Note...
Page 151: Tone Timings
4.6.5 Tone Settings Tone Timings Description Specifies the pattern, in milliseconds, of dial tones using up to 10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas. Note • The unit will not play the tone for the duration of the first value, play it for the duration of the second value, stop it for the duration of the third value, play it again for the duration of the fourth value, and so on.
Page 152: Ringing Tone
4.6.5 Tone Settings Configuration File Reference BUSY_TONE_TIMING (Page 295) 4.6.5.3 Ringing Tone Tone Frequencies Description Specifies the dual-tone frequencies, in hertz, of ringback tones using 2 whole numbers separated by a comma. Value Range 0, 200–2000 (0: No tone) Note •...
Page 153: Tone Timings
4.6.5 Tone Settings Configuration File Reference DIAL_TONE4_FRQ (Page 293) Tone Timings Description Specifies the pattern, in milliseconds, of stutter dial tones to notify that a voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Page 154: Import Phonebook
4.6.6 Import Phonebook Default Value 60,250,190 Note • Avoid setting 1–50 for any of the values. Configuration File Reference REORDER_TONE_TIMING (Page 296) 4.6.6 Import Phonebook This screen allows you to import phonebook data from a PC to the specified unit. For details, see 6.1.1 Import/ Export Operation.
Page 155: Export Phonebook
4.6.7 Export Phonebook Default Value Not stored. 4.6.7 Export Phonebook This screen allows you to save the phonebook data stored in the unit as a TSV file on a PC. For details, see 6.1.1 Import/Export Operation. Note • When you begin transferring the phonebook data, the "Now Processing File Data" screen is displayed, and the screen is periodically reloaded.
Page 156: Dss Console
4.6.8 DSS Console 4.6.8 DSS Console This screen allows you to configure various features for each DSS console key. Each DSS console supports 40 keys. DSS console 1 uses keys 1-40, DSS console 2 uses keys 41-80, etc. 4.6.8.1 DSS 1-5 Key (No. 1–200) Type Description Selects the feature to be assigned to each DSS console key.
Page 157: Parameter
4.7 Maintenance Value Range • One Touch Dial • • Line • • Wrap Up • Line Status • Call Forward • Phonebook • Call History • Simultaneous Ring • Hoteling (Hospitality) • Transfer • Blind Transfer • Conference • Directed Call Pickup •...
Page 158: Provisioning Maintenance
4.7.1 Provisioning Maintenance 4.7.1 Provisioning Maintenance This screen allows you to change the provisioning setup to download the configuration files from the provisioning server of your phone system. 4.7.1.1 Provisioning Maintenance Standard File URL Description Specifies the URL of the standard configuration file, which is used when every unit needs different settings.
Page 159: Cyclic Auto Resync
4.7.1 Provisioning Maintenance Value Range Max. 384 characters Default Value Not stored. Configuration File Reference CFG_MASTER_FILE_PATH (Page 195) Cyclic Auto Resync Description Selects whether the unit periodically checks for updates of configuration files. Value Range • • Default Value Configuration File Reference CFG_CYCLIC (Page 195) Resync Interval Description...
Page 160: Firmware Maintenance
4.7.2 Firmware Maintenance 4.7.2 Firmware Maintenance This screen allows you to perform firmware updates automatically. 4.7.2.1 Firmware Maintenance Enable Firmware Update Description Selects whether to perform firmware updates when the unit detects a newer version of firmware. Note • Manual firmware updates from the Web user interface (® see 4.7.3 Upgrade Firmware) can be performed regardless of this setting.
Page 161: Upgrade Firmware
4.7.4 Export Logging File 4.7.3 Upgrade Firmware This screen allows you to download the Upgrade Firmware data from a PC. Note • After the firmware has been successfully updated, the unit will restart automatically. 4.7.3.1 Upgrade Firmware File Name Description Specifies the path of the firmware file to be imported.
Page 162: Export Logging File
4.7.6 Restart 4.7.4.1 Export Logging File Logging File Type Description Selects the Logging File Type setting. Value Range • Power Down • Event • SIP Packet Note • The line break code for the log file is <LF>. • If a file is exported when Power Down is selected, the saved file is power.log.
Page 163 4.7.6 Restart Notice • The unit will restart even if it is being accessed through the phone user interface, or on calls. Document Version 2015-07 Administrator Guide...
Page 164 4.7.6 Restart Administrator Guide Document Version 2015-07...
Page 165: Configuration File Programming
Section 5 Configuration File Programming This section provides information about the configuration parameters used in the configuration files. Document Version 2015-07 Administrator Guide...
Page 166: Configuration File Parameter List
5.1 Configuration File Parameter List 5.1 Configuration File Parameter List The following tables show all the parameters that can be programmed using configuration file programming. For details about each parameter, see the reference pages listed. For details about configuration file specifications, see 2.4 Configuration File Specifications. System Settings Parameter Name Ref.
Page 167 5.1 Configuration File Parameter List Parameter Name Ref. Page 191 PHY_MODE_PC Page 191 VLAN_ENABLE Page 191 VLAN_ID_IP_PHONE Page 192 VLAN_PRI_IP_PHONE Page 192 VLAN_ID_PC Page 192 VLAN_PRI_PC Page 192 LLDP_ENABLE Page 193 LLDP_INTERVAL Page 193 LLDP_VLAN_ID_PC Page 193 LLDP_VLAN_PRI_PC Pre-Provisioning Settings Parameter Name Ref.
Page 168: Firmware Update Settings
5.1 Configuration File Parameter List Parameter Name Ref. CFG_FILE_KEY3 Page 197 CFG_FILE_KEY_LENGTH Page 198 CFG_ROOT_CERTIFICATE_PATH Page 198 CFG_CLIENT_CERT_PATH Page 198 CFG_PKEY_PATH Page 198 HTTP_SSL_VERIFY Page 199 Firmware Update Settings Parameter Name Ref. Page 199 FIRM_UPGRADE_ENABLE Page 199 FIRM_FILE_PATH FIRM_VERSION Page 200 HTTP Settings Parameter Name Ref.
Page 169: Xml Settings
5.1 Configuration File Parameter List Parameter Name Ref. Page 203 USER_PASS ADMIN_ID Page 204 Page 204 ADMIN_PASS TR-069 Settings Parameter Name Ref. ACS_URL Page 204 ACS_USER_ID Page 205 ACS_PASS Page 205 PERIODIC_INFORM_ENABLE Page 205 PERIODIC_INFORM_INTERVAL Page 205 PERIODIC_INFORM_TIME Page 206 CON_REQ_USER_ID Page 206 CON_REQ_PASS...
Page 170 5.1 Configuration File Parameter List Parameter Name Ref. Page 210 XMLAPP_LDAP_USERPASS XMLAPP_NPB_SEARCH_TIMER Page 211 Page 211 XMLAPP_LDAP_MAXRECORD Page 211 XML_HTTPD_PORT XML_ERROR_INFORMATION Page 211 Page 212 XMLAPP_START_URL Page 212 XMLAPP_INITIAL_URL Page 212 XMLAPP_INCOMING_URL Page 212 XMLAPP_TALKING_URL Page 213 XMLAPP_MAKECALL_URL Page 213 XMLAPP_CALLLOG_URL Page 213 XMLAPP_IDLING_URL...
Page 171 5.1 Configuration File Parameter List XMPP (UC-ONE) Settings Parameter Name Ref. Page 217 UC_ENABLE Page 217 UC_USERID Page 217 UC_PASSWORD Page 217 XMPP_SERVER Page 218 XMPP_PORT XMPP_TLS_VERIFY Page 218 XMPP_ROOT_CERT_PATH Page 218 XMPP_CLIENT_CERT_PATH Page 218 XMPP_PKEY_PATH Page 219 LDAP Settings Parameter Name Ref.
Page 172 5.1 Configuration File Parameter List Call Center Settings Parameter Name Ref. Page 223 CALL_CENTER_ENABLE_n Page 223 ACD_ENABLE_n ACD_LOGIN_CONDITION_n Page 223 ACD_LOGOUT_CONDITION_n Page 224 Page 224 CC_DISPOSITION_CODE_ENABLE_n Page 224 CC_CUSTOMER_ORG_TRACE_ENABLE_n Page 225 CC_HOTELING_EVENT_n Page 225 HOTELING_USERID_n Page 225 HOTELING_PASSWORD_n Page 225 CC_STATUS_EVENT_ENABLE_n SNMP Settings Parameter Name...
Page 173: Time Settings
5.1 Configuration File Parameter List Parameter Name Ref. Page 229 MPAGE_LABELm Page 229 MPAGE_SEND_ENABLEm MPAGE_CODEC Page 230 MPAGE_SP_VOL_EMERGENCY Page 230 MPAGE_SP_VOL_PRIORITY Page 230 MPAGE_DND_ENABLE Page 230 MPAGE_FUNCKEY_ENABLE Page 231 NTP Settings Parameter Name Ref. Page 231 NTP_ADDR TIME_SYNC_INTVL Page 231 Page 231 TIME_QUERY_INTVL Time Settings...
Page 174: Nat Settings
5.1 Configuration File Parameter List Network Phonebook (Common) Parameter Name Ref. ONLY_NPB_ENABLE Page 237 NETWORK_SEARCH_ENABLE Page 237 Language Settings Parameter Name Ref. Page 237 AVAILABLE_LANGUAGE Page 238 DEFAULT_LANGUAGE LANGUAGE_PATHx Page 238 LANGUAGE_VERx Page 238 Page 238 AVAILABLE_LANGUAGE_WEB Page 238 WEB_LANGUAGE WEB_LANGUAGE_PATHx Page 239 WEB_LANGUAGE_VERx...
Page 175 5.1 Configuration File Parameter List Parameter Name Ref. Page 242 SIP_URI_n Page 242 SIP_RGSTR_ADDR_n Page 243 SIP_RGSTR_PORT_n Page 243 SIP_PRXY_ADDR_n Page 243 SIP_PRXY_PORT_n Page 243 SIP_PRSNC_ADDR_n Page 244 SIP_PRSNC_PORT_n Page 244 SIP_OUTPROXY_ADDR_n Page 244 SIP_OUTPROXY_PORT_n Page 244 SIP_SVCDOMAIN_n Page 245 SIP_AUTHID_n Page 245 SIP_PASS_n...
Page 176 5.1 Configuration File Parameter List Parameter Name Ref. SIP_18X_RTX_INTVL_n Page 252 SIP_SUBS_EXPIRE_n Page 252 SUB_INTERVAL_RATE_n Page 253 SUB_RTX_INTVL_n Page 253 SIP_P_PREFERRED_ID_n Page 253 SIP_PRIVACY_n Page 253 ADD_USER_PHONE_n Page 254 SIP_ANM_DISPNAME_n Page 254 SIP_ANM_USERNAME_n Page 254 SIP_ANM_HOSTNAME_n Page 255 Page 255 SIP_DETECT_SSAF_n SIP_RCV_DET_HEADER_n Page 255...
Page 177: Codec Settings
5.1 Configuration File Parameter List Parameter Name Ref. AKA_AUTHENTICATION_ENABLE_n Page 262 Page 262 RFC2543_HOLD_ENABLE_n SIP_HOLD_ATTRIBUTE_n Page 262 SDP_USER_ID_n Page 263 Page 263 TELEVENT_PAYLOAD HOLD_SOUND_PATH_n Page 263 KEEP_EARLYMEDIA_n Page 264 RFC3327_SUPPORT_PATH Page 264 RFC4244_SUPPORT_HISTORY Page 264 RFC3319_SUPPORT_JOIN Page 264 RFC6947_DRAFT08_ALTC Page 265 RFC5627_SUPPORT_GRUU_n Page 265 ESCAPECODE_CONVERSION...
Page 178 5.1 Configuration File Parameter List DTMF Settings Parameter Name Ref. Page 269 DTMF_METHOD_n OUTBANDDTMF_VOL Page 269 INBANDDTMF_VOL Page 270 DTMF_SIGNAL_LEN Page 270 DTMF_INTDIGIT_TIM Page 270 RTP/RTCP/RTCP-XR Settings Parameter Name Ref. Page 270 DSCP_RTP_n Page 270 DSCP_RTCP_n MAX_DELAY_n Page 271 MIN_DELAY_n Page 271 NOM_DELAY_n Page 271...
Page 179 5.1 Configuration File Parameter List VQ Report by PUBLISH Parameter Name Ref. Page 275 VQREPORT_COLLECTOR_ADDRESS Page 276 VQREPORT_COLLECTOR_PORT Page 276 VQREPORT_SEND Page 276 ALERT_REPORT_TRIGGER Page 276 ALERT_REPORT_MOSQ_CRITICAL Page 277 ALERT_REPORT_MOSQ_WARNING Page 277 ALERT_REPORT_DELAY_CRITICAL Page 277 ALERT_REPORT_DELAY_WARNING VQREPORT_SIGNAL_COMPRESSION Page 277 uaCSTA Settings Parameter Name Ref.
Page 180 5.1 Configuration File Parameter List Parameter Name Ref. Page 281 RINGTONE_SETTING_n DISPLAY_NAME_REPLACE Page 281 NUMBER_MATCHING_LOWER_DIGIT Page 281 NUMBER_MATCHING_UPPER_DIGIT Page 282 FLASH_RECALL_TERMINATE Page 282 FLASHHOOK_CONTENT_TYPE Page 282 Page 282 NUM_PLAN_PARKING Page 282 CALLPARK_KEY_ENABLE Page 283 NUM_PLAN_PARK_RETRIEVING Page 283 IDLE_SOFT_KEY_PARK_RETRIEVING HOLD_RECALL_TIM Page 283 HOLD_TRANSFER_OPERATION Page 284 ONHOOK_TRANSFER_ENABLE...
Page 181 5.1 Configuration File Parameter List Parameter Name Ref. Page 288 DSS_BUTTON_FACILITY_ARGx Page 288 DSS_BUTTON_LABELx DSS_BUTTON_QUICK_DIALx Page 289 Tone Settings Parameter Name Ref. OUTSIDE_DIAL_TONE_FRQ Page 289 OUTSIDE_DIAL_TONE_GAIN Page 289 OUTSIDE_DIAL_TONE_RPT Page 289 OUTSIDE_DIAL_TONE_TIMING Page 290 CONFIRMATION_TONE5_FRQ Page 290 CONFIRMATION_TONE5_GAIN Page 290 REORDER_TONE_ENABLE Page 290 TONE_LEN_DISCONNECT...
Page 182 5.1 Configuration File Parameter List Parameter Name Ref. REORDER_TONE_RPT Page 295 Page 296 REORDER_TONE_TIMING Page 296 RINGBACK_TONE_FRQ RINGBACK_TONE_GAIN Page 296 RINGBACK_TONE_RPT Page 296 Page 297 RINGBACK_TONE_TIMING HOLD_ALARM_FRQ Page 297 HOLD_ALARM_GAIN Page 297 CW_TONE1_FRQ Page 297 CW_TONE1_GAIN Page 298 HOLD_TONE_FRQ Page 298 HOLD_TONE_GAIN Page 298 BELL_CORE_PATTERN1_TIMING...
Page 183 5.1 Configuration File Parameter List Parameter Name Ref. Page 303 INTERNATIONAL_ACCESS_CODE Page 304 COUNTRY_CALLING_CODE Page 304 NATIONAL_ACCESS_CODE Page 304 IDLE_SOFT_KEY_A Page 305 IDLE_SOFT_KEY_B Page 305 IDLE_SOFT_KEY_C Page 305 ADMIN_ABILITY_ENABLE Page 306 EMERGENCY_CALLx Page 306 CALL_REJECTIONx Page 306 CLICKTO_ENABLE_n Page 306 CALLPARK_NOTIFICATION_ENABLE_n Page 307 SHARED_CALL_ENABLE_n...
Page 184: General Information On The Configuration Files
Certain parameter names end with "_n". This signifies that these settings can be made to each line individually. The number of lines available varies depending on the phone being used, as follows: – KX-HDV230: 1–6 Value Format Each parameter value is categorized into Integer, Boolean, or String. Some parameters require a composite form such as "Comma-separated Integer"...
Page 185: Characters Available For String Values
5.3.1 System Settings Value Range Indicates the permitted value range of the parameter. Default Value Indicates the factory default value of the parameter. Actual default values may vary depending on your phone system dealer/service provider. Phone User Interface Reference Provides the reference page of the corresponding parameter in phone user interface programming. Web User Interface Reference Provides the reference page of the corresponding parameter in Web user interface programming.
Page 186: Basic Network Settings
5.3.2 Basic Network Settings 5.3.2 Basic Network Settings IP_ADDR_MODE Value Format INTEGER Description Specifies the IP addressing mode. Value Range • 0: IPv4 • 1: IPv6 • 2: IPv4&IPv6 Default Value Web User Interface Reference IP Addressing Mode (Page 77) CONNECTION_TYPE Value Format INTEGER...
Page 187: Static_Gateway
5.3.2 Basic Network Settings Description Specifies the subnet mask for IPv4. Note • This setting is available only when "CONNECTION_TYPE" is set to "0". • When you specify this parameter, you must specify "STATIC_IP_ADDRESS" together in a configuration file. Value Range Max.
Page 188: User_Dns2_Addr
5.3.2 Basic Network Settings USER_DNS2_ADDR Value Format IPADDR Description Specifies the IP address of the secondary DNS server for IPv4. Note • This setting is available only when "CONNECTION_TYPE" is set to "0". Value Range Max. 15 characters n.n.n.n [n=0–255] Default Value Empty string Web User Interface Reference...
Page 189: Connection_Type_Ipv6
5.3.2 Basic Network Settings Default Value Panasonic CONNECTION_TYPE_IPV6 Value Format INTEGER Description Specifies the IP address setting mode for IPv6. Value Range • 0: Static • 1: DHCP • 2: Stateless Autoconfiguration Default Value Web User Interface Reference Connection Mode (Page 79)
Page 190: User_Dns1_Addr_Ipv6
5.3.3 Ethernet Port Settings USER_DNS1_ADDR_IPV6 Value Format IPADDR-V6 Description Specifies the IP address of primary DNS server for IPv6. Value Range Max. 39 characters n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available] Default Value Empty string Web User Interface Reference DNS1 (Page 81) USER_DNS2_ADDR_IPV6 Value Format IPADDR-V6 Description...
Page 191: Phy_Mode_Pc
5.3.3 Ethernet Port Settings Web User Interface Reference LAN Port (Page 82) PHY_MODE_PC Value Format INTEGER Description Specifies the link speed and duplex mode of the PC port. Value Range • 1: Auto • 2: 100Mbps/Full Duplex • 3: 100Mbps/Half Duplex •...
Page 192: Vlan_Pri_Ip_Phone
5.3.3 Ethernet Port Settings VLAN_PRI_IP_PHONE Value Format INTEGER Description Specifies the priority number for the unit. Value Range 0–7 Default Value Web User Interface Reference IP Phone Priority (Page 84) VLAN_ID_PC Value Format INTEGER Description Specifies the VLAN ID for the PC. Value Range 0–4094 Default Value...
Page 193: Lldp_Interval
5.3.4 Pre-Provisioning Settings Web User Interface Reference Enable LLDP (Page 83) LLDP_INTERVAL Value Format INTEGER Description Specifies the interval, in seconds, between sending each LLDP frame. Value Range 1–3600 Default Value Web User Interface Reference Packet Interval (Page 83) LLDP_VLAN_ID_PC Value Format INTEGER Description...
Page 194: Option66_Enable
5.3.4 Pre-Provisioning Settings OPTION66_ENABLE Value Format BOOLEAN Description Specifies whether to enable or disable the DHCP option 66 provisioning. Note • The unit will try to download configuration files through the TFTP server, the IP address or FQDN of which is specified in the option number 66 field.
Page 195: Provisioning Settings
5.3.5 Provisioning Settings 5.3.5 Provisioning Settings CFG_STANDARD_FILE_PATH Value Format STRING Description Specifies the URL of the standard configuration file, which is used when every unit needs different settings. Value Range Max. 384 characters Default Value Empty string Web User Interface Reference Standard File URL (Page 158) CFG_PRODUCT_FILE_PATH Value Format...
Page 196: Cfg_Cyclic_Intvl
5.3.5 Provisioning Settings CFG_CYCLIC_INTVL Value Format INTEGER Description Specifies the interval, in minutes, between periodic checks for updates of the configuration files. Value Range 1–40320 Default Value 10080 Web User Interface Reference Resync Interval (Page 159) CFG_RESYNC_TIME Value Format STRING Description Specifies the time (hour:minute) that the unit checks for updates of configuration files.
Page 197: Cfg_Resync_Action
5.3.5 Provisioning Settings Description Specifies the value of the "Event" header sent from the SIP server to the unit so that the unit can access the configuration files on the provisioning server. Value Range Max. 15 characters Default Value check-sync Web User Interface Reference Header Value for Resync Event (Page 159) CFG_RESYNC_ACTION...
Page 198: Cfg_File_Key_Length
5.3.5 Provisioning Settings Value Range 32 characters Note • If an empty string is set for this parameter, decryption with this value is disabled. Default Value Empty string CFG_FILE_KEY_LENGTH Value Format INTEGER Description Specifies the key lengths in bits used to decrypt configuration files. Value Range 128,192, 256 Default Value...
Page 199: Http_Ssl_Verify
5.3.6 Firmware Update Settings HTTP_SSL_VERIFY Value Format INTEGER Description Specifies whether to enable the verification of the root certificate. • Value Range 0 (No verification of root certificate) • 1 (Simple verification of root certificate) • 2 (Precise verification of root certificate) Note •...
Page 200: Firm_Version
5.3.7 HTTP Settings Description Specifies the URL where the firmware file is stored. Note • This setting is available only when "FIRM_UPGRADE_ENABLE" is set to "Y". Value Range Max. 384 characters Default Value Empty string Web User Interface Reference Firmware File URL (Page 160) FIRM_VERSION Value Format STRING...
Page 201: Http_Auth_Id
5.3.7 HTTP Settings Value Range Max. 64 characters Note • If "{mac}" is included in this parameter, it will be replaced with the unit’s MAC address in lower-case. • If "{MAC}" is included in this parameter, it will be replaced with the unit’s MAC address in upper-case.
Page 202: Http_Proxy_Addr
5.3.8 HTTPD/WEB Settings HTTP_PROXY_ADDR Value Format STRING Description Specifies the IP address or FQDN of the proxy server. Value Range Max. 256 characters Default Value Empty string Web User Interface Reference Proxy Server Address (Page 87) HTTP_PROXY_PORT Value Format INTEGER Description Specifies the port of the proxy server.
Page 203: Httpd_Portopen_Auto
5.3.8 HTTPD/WEB Settings Default Value HTTPD_PORTOPEN_AUTO Value Format BOOLEAN Description Specifies whether the unit’s Web port is always open. Value Range • Y (Web port is always open) • N (Web port is closed [can be opened temporarily through phone user interface programming]) Notice •...
Page 204: Admin_Id
5.3.9 TR-069 Settings Description Specifies the password to use to authenticate the User account when logging in to the Web user interface. Value Range 6–64 characters (except !, ", #, $, %, &, ', (, ), *, +, ,, /, :, ;, <, =, >, ?, [, ], ^, `, {, |, }, ~, \ and space) Default Value Empty string (only before a user accesses the Web user interface for...
Page 205: Acs_User_Id
5.3.9 TR-069 Settings Value Range Max. 256 characters Default Value Empty string ACS_USER_ID Value Format STRING Description Specifies the user ID for the Auto-Configuration Server for using TR-069. Value Range Max. 256 characters (except ", &, ', :, <, >, and space) Default Value Empty string ACS_PASS...
Page 206: Periodic_Inform_Time
5.3.9 TR-069 Settings PERIODIC_INFORM_TIME Value Format STRING Description Specifies the time (UTC) to determine when the CPE will initiate the periodic Inform method calls. Note • Each Inform call must occur at this reference time plus or minus an integer multiple of the "PERIODIC_INFORM_INTERVAL". This "PERIODIC_INFORM_TIME"...
Page 207: Annex_G_Stun_Enable
5.3.9 TR-069 Settings Default Value Empty string ANNEX_G_STUN_ENABLE Value Format BOOLEAN Description Specifies whether or not the CPE can use STUN. This applies only to the use of STUN in association with the ACS to allow UDP Connection Requests. Value Range •...
Page 208: Annex_G_Stun_User_Id
5.3.9 TR-069 Settings ANNEX_G_STUN_USER_ID Value Format STRING Description Specifies the STUN user name to be used in Binding Requests (only if message integrity has been requested by the STUN server). Note • If the value for this setting is an empty string, the CPE must not send STUN Binding Requests with message integrity.
Page 209: Udp_Con_Req_Addr_Notify_Limit
5.3.10 XML Settings Description Specifies the minimum period, in seconds, that STUN Binding Requests can be sent by the CPE for the purpose of maintaining the binding in the Gateway. This limit applies only to Binding Requests sent from the UDP Connection Request address and port, and only those that do not contain the BINDING-CHANGE attribute.
Page 210: Xmlapp_Userid
5.3.10 XML Settings XMLAPP_USERID Value Format STRING Description Specifies the authentication ID required to access the XML application server. Value Range Max. 128 characters Default Value Empty string Web User Interface Reference User ID (Page 99) XMLAPP_USERPASS Value Format STRING Description Specifies the authentication password used to access the XML application server.
Page 211: Xmlapp_Npb_Search_Timer
5.3.10 XML Settings Description Specifies the authentication password used to access the LDAP server. Value Range Max. 128 characters Default Value Empty string Web User Interface Reference Password (Page 103) XMLAPP_NPB_SEARCH_TIMER Value Format INTEGER Description Specifies the time which is for searching XML phonebook. Value Range 1–65535 Default Value...
Page 212: Xmlapp_Start_Url
5.3.10 XML Settings XMLAPP_START_URL Value Format STRING Description Specifies the URL that is accessed when the unit starts up, to check for XML data. Value Range Max. 256 characters Default Value Empty string Web User Interface Reference Bootup URL (Page 100) XMLAPP_INITIAL_URL Value Format STRING...
Page 213: Xml_Initiate_Key_Soft1
5.3.10 XML Settings XMLAPP_MAKECALL_URL Value Format STRING Description Specifies the URL that is accessed when the unit makes a call, to check for XML data. Value Range Max. 256 characters Default Value Empty string Web User Interface Reference Making Call URL (Page 101) XMLAPP_CALLLOG_URL Value Format STRING...
Page 214: Xml_Initiate_Key_Soft2
5.3.11 XSI Settings XML_INITIATE_KEY_SOFT2 Value Format BOOLEAN Description Specifies whether to enable the XML application or operate the telephone normally, when the corresponding button is pressed during standby mode. Value Range • Y: Enable XML application • N: Normal operation Default Value Web User Interface Reference Soft Key B (Center) (Page 102)
Page 215: Xsi_Server
5.3.11 XSI Settings Default Value Web User Interface Reference Enable Xtended Service (Page 94) XSI_SERVER Value Format STRING Description Specifies the IP address or FQDN of the Xsi server. Value Range Max. 256 characters Default Value Empty string Web User Interface Reference Server Address (Page 95) XSI_SERVER_TYPE Value Format...
Page 216: Xsi_Password_N
5.3.11 XSI Settings XSI_PASSWORD_n Parameter Name Example XSI_PASSWORD_1, XSI_PASSWORD_2, ..., XSI_PASSWORD_6 Value Format STRING Description Specifies the authentication password required to access the Xsi server. Value Range Max. 128 characters Default Value Empty string Web User Interface Reference Password (Line 1–6) (Page 95) XSI_PHONEBOOK_ENABLE_n Parameter Name Example XSI_PHONEBOOK_ENABLE_1, XSI_PHONEBOOK_ENABLE_2, ...,...
Page 217: Xmpp (Uc-One) Settings
5.3.12 XMPP (UC-ONE) Settings Description Specifies whether to enable or disable the Xsi call log service. Value Range • Y: Enable Xsi call log • N: Disable Default Value Web User Interface Reference Enable Call Log (Line 1–6) (Page 96) 5.3.12 XMPP (UC-ONE) Settings UC_ENABLE Value Format...
Page 218: Xmpp_Port
5.3.12 XMPP (UC-ONE) Settings Description Specifies the IP address or FQDN of the XMPP server. Value Range Max. 256 characters Default Value Empty string Web User Interface Reference Server Address (Page 97) XMPP_PORT Value Format INTEGER Description Specifies the local XMPP port. Value Range 1–65535 Default Value...
Page 219: Xmpp_Pkey_Path
5.3.13 LDAP Settings XMPP_PKEY_PATH Value Format STRING Description Specifies the URI where the private key is stored. Value Range Max. 384 characters Default Value Empty string 5.3.13 LDAP Settings LDAP_ENABLE Value Format BOOLEAN Description Specifies whether to enable or disable the LDAP service. Value Range •...
Page 220: Ldap_Server_Port
5.3.13 LDAP Settings LDAP_SERVER_PORT Value Format INTEGER Description Specifies the port of the LDAP server. Value Range 1–65535 Default Value Web User Interface Reference Port (Page 92) LDAP_MAXRECORD Value Format INTEGER Description Specifies the maximum number of search results to be returned by the LDAP server.
Page 221: Ldap_Password
5.3.13 LDAP Settings Web User Interface Reference User ID (Page 92) LDAP_PASSWORD Value Format STRING Description Specifies the authentication password required to access the LDAP server. Value Range Max. 128 characters Default Value Empty string Web User Interface Reference Password (Page 92) LDAP_NAME_FILTER Value Format STRING...
Page 222: Ldap_Numb_Attribute
5.3.13 LDAP Settings LDAP_NUMB_ATTRIBUTE Value Format STRING Description Specifies the number attributes of each record which are to be returned in the LDAP search result. Value Range Max. 256 characters Default Value telephoneNumber,mobile,homePhone Web User Interface Reference Number Attributes (Page 93) LDAP_BASEDN Value Format STRING...
Page 223: Ldap_Pkey_Path
5.3.14 Call Center Settings Default Value Empty string LDAP_PKEY_PATH Value Format STRING Description Specifies the URI where the private key is stored. Value Range Max. 384 characters Default Value Empty string 5.3.14 Call Center Settings CALL_CENTER_ENABLE_n Parameter Name Example CALL_CENTER_ENABLE_1, CALL_CENTER_ENABLE_2, ..., CALL_CENTER_ENABLE_6 Value Format BOOLEAN...
Page 224: Acd_Logout_Condition_N
5.3.14 Call Center Settings Value Range • 0: Available • 1: Unavailable Default Value ACD_LOGOUT_CONDITION_n Parameter Name Example ACD_LOGOUT_CONDITION_1, ACD_LOGOUT_CONDITION_2, ..., ACD_LOGOUT_CONDITION_6 Value Format INTEGER Description Specifies the ACD state when logout to the ACD. Value Range • 0: Continue •...
Page 225: Cc_Hoteling_Event_N
5.3.14 Call Center Settings CC_HOTELING_EVENT_n Parameter Name Example CC_HOTELING_EVENT_1, CC_HOTELING_EVENT_2, ..., CC_HOTELING_EVENT_6 Value Format BOOLEAN Description Specifies whether to enable the Hoteling Event. • Value Range Y: Enable • N: Disable Default Value Web User Interface Reference Hoteling Event (Page 106) HOTELING_USERID_n Parameter Name Example HOTELING_USERID_1, HOTELING_USERID_2, ...,...
Page 226: Snmp Settings
5.3.15 SNMP Settings Value Range • Y: Enable • N: Disable Default Value Web User Interface Reference Status Event (Page 106) 5.3.15 SNMP Settings Note • Changing SNMP setting may require restarting the unit. SNMP_ENABLE Value Format BOOLEAN Description Specifies whether to enable SNMP feature. Value Range •...
Page 227: Snmp_Security_Type
5.3.15 SNMP Settings Default Value Empty string SNMP_SECURITY_TYPE Value Format INTEGER Description Specifies the security type of SNMPv3. Value Range 0: noAuthNoPriv 1: AuthNoPriv 2: AuthPriv Default Value SNMP_SECURITY_USER Value Format STRING Description Specifies the security user ID for authentication and encryption of SNMPv3.
Page 228: Snmp_Encrypt_Password
5.3.16 Multicast Paging Settings Value Range 0: DES 1: AES Default Value SNMP_ENCRYPT_PASSWORD Value Format STRING Description Specifies the encryption password of SNMPv3. Value Range 0, 8–64 characters Default Value Empty string 5.3.16 Multicast Paging Settings MPAGE_ADDRm Parameter Name Example MPAGE_ADDR1, MPAGE_ADDR2, …, MPAGE_ADDR5 Value Format IPADDR...
Page 229: Mpage_Prioritym
5.3.16 Multicast Paging Settings Value Format INTEGER Description Specifies the port number for multi-cast paging for each channel group. (m=1–5, the channel group) Value Range 0–65535 (0: not used) Default Value Web User Interface Reference Port (Group 1–5) (Page 90) MPAGE_PRIORITYm Parameter Name Example MPAGE_PRIORITY1, MPAGE_PRIORITY2, MPAGE_PRIORITY3...
Page 230: Mpage_Codec
5.3.16 Multicast Paging Settings Web User Interface Reference Enable Transmission (Group 1–5) (Page 90) MPAGE_CODEC Value Format INTEGER Description Specifies the codec for multi-cast paging. Value Range 0 : "G722" 1 : "PCMA" 2 : – 3 : "G729A" 4 : "PCMU" Default Value MPAGE_SP_VOL_EMERGENCY Value Format...
Page 231: Mpage_Funckey_Enable
5.3.17 NTP Settings MPAGE_FUNCKEY_ENABLE Value Format BOOLEAN Description Specifies whether to enable or disable the multicast paging key in function menu. Value Range • Y: Enable • N: Disable Default Value 5.3.17 NTP Settings NTP_ADDR Value Format STRING Description Specifies the IP address or FQDN of NTP server. Value Range Max.
Page 232: Time Settings
5.3.18 Time Settings 5.3.18 Time Settings LOCAL_TIME_ZONE_POSIX Value Format STRING Description Specifies a IEEE 1003.1 (POSIX)-compliant local time zone definition (e.g., "EST+5 EDT,M4.1.0/2,M10.5.0/2"). Note • If this parameter is specified, the following parameters are disabled, and operation will be based on this parameter. –...
Page 233: Dst_Enable
5.3.18 Time Settings Value Range -720–780 Note • Only the following values are available: -720 (GMT -12:00), -660 (GMT -11:00), -600 (GMT -10:00), -540 (GMT -09:00), -480 (GMT -08:00), -420 (GMT -07:00), -360 (GMT -06:00), -300 (GMT -05:00), -240 (GMT -04:00), -210 (GMT -03:30), -180 (GMT -03:00), -120 (GMT -02:00), -60 (GMT -01:00), 0 (GMT), 60 (GMT +01:00), 120 (GMT +02:00), 180 (GMT +03:00), 210 (GMT +03:30), 240 (GMT +04:00), 270...
Page 234: Dst_Start_Month
5.3.18 Time Settings Value Range 0–720 Note • This parameter is usually set to "60". Default Value Web User Interface Reference DST Offset (Summer Time Offset) (Page 114) DST_START_MONTH Value Format INTEGER Description Specifies the month in which DST (Summer Time) starts. Note •...
Page 235: Dst_Start_Time
5.3.18 Time Settings Description Specifies the day of the week on which DST (Summer Time) starts. Note • This parameter is disabled when the "LOCAL_TIME_ZONE_POSIX" parameter is specified. Value Range 0–6 – 0: Sunday – 1: Monday – 2: Tuesday –...
Page 236: Dst_Stop_Ordinal_Day
5.3.18 Time Settings DST_STOP_ORDINAL_DAY Value Format INTEGER Description Specifies the number of the week on which DST (Summer Time) ends. The actual end day is specified in "DST_STOP_DAY_OF_WEEK". For example, to specify the second Sunday, specify "2" in this parameter, and "0"...
Page 237: Network Phonebook (Common)
5.3.20 Language Settings Description Specifies the end time of DST (Summer Time) in minutes after 12:00 Note • This parameter is disabled when the "LOCAL_TIME_ZONE_POSIX" parameter is specified. Value Range 0–1439 Default Value Web User Interface Reference Time (Page 117) 5.3.19 Network Phonebook (Common) ONLY_NPB_ENABLE Value Format...
Page 238: Default_Language
5.3.20 Language Settings DEFAULT_LANGUAGE Value Format STRING Description Specifies the default language on the unit. Value Range en, es, fr, de, it, da, nl, sv, fi, el, hu, pt, pl, sk, cs, sh, ru, uk, tr, no, ro, ct, kk, me ® see 4.4.1.1 Selectable Language Default Value Web User Interface Reference IP Phone (Page 109)
Page 239: Web_Language_Pathx
5.3.21 NAT Settings Description Specifies the default language on the unit. en, es, fr, de, it, nl, el, hu, pt, pl, sk, cs, sh, ru, uk, tr, ro, ct, kk, me ® Value Range see 4.4.1.1 Selectable Language Default Value Web User Interface Reference Web Language (Page 109) WEB_LANGUAGE_PATHx...
Page 240: Stun_2Ndserv_Addr
5.3.21 NAT Settings Description Specifies the port of the primary STUN server. Value Range 1–65535 Default Value 3478 Web User Interface Reference Port (Page 88) STUN_2NDSERV_ADDR Value Format STRING Description Specifies the IP address or FQDN of the secondary STUN server. Value Range Max.
Page 241: Port_Punch_Intvl
• If "{fwver}" is included in this parameter, it will be replaced with the firmware version of the unit. Default Value Panasonic-{MODEL}/{fwver} ({mac}) Web User Interface Reference User Agent (Page 119) Document Version 2015-07 Administrator Guide...
Page 242: Phone_Number_N
5.3.22 SIP Settings PHONE_NUMBER_n Parameter Name Example PHONE_NUMBER_1, PHONE_NUMBER_2, ..., PHONE_NUMBER_6 Value Format STRING Description Specifies the phone number to use as the user ID required for registration to the SIP registrar server. Note • When registering using a user ID that is not a phone number, you should use the "SIP_URI_n"...
Page 243: Sip_Rgstr_Port_N
5.3.22 SIP Settings SIP_RGSTR_PORT_n Parameter Name Example SIP_RGSTR_PORT_1, SIP_RGSTR_PORT_2, ..., SIP_RGSTR_PORT_6 Value Format INTEGER Description Specifies the port number to use for communication with the SIP registrar server. Value Range 1–65535 Default Value 5060 Web User Interface Reference Registrar Server Port (Page 122) SIP_PRXY_ADDR_n Parameter Name Example SIP_PRXY_ADDR_1, SIP_PRXY_ADDR_2, ..., SIP_PRXY_ADDR_6...
Page 244: Sip_Prsnc_Port_N
5.3.22 SIP Settings Web User Interface Reference Presence Server Address (Page 122) SIP_PRSNC_PORT_n Parameter Name Example SIP_PRSNC_PORT_1, SIP_PRSNC_PORT_2, ..., SIP_PRSNC_PORT_6 Value Format INTEGER Description Specifies the port number to use for communication with the SIP presence server. Value Range 1–65535 Default Value 5060 Web User Interface Reference...
Page 245: Sip_Authid_N
5.3.22 SIP Settings Description Specifies the domain name provided by your phone system dealer/ service provider. The domain name is the part of the SIP URI that comes after the "@" symbol. Value Range Max. 256 characters Default Value Empty string Web User Interface Reference Service Domain (Page 123) SIP_AUTHID_n...
Page 246: Dscp_Sip_N
5.3.22 SIP Settings Default Value SIP_SRC_PORT_1="5060" SIP_SRC_PORT_2="5070" SIP_SRC_PORT_3="5080" SIP_SRC_PORT_4="5090" SIP_SRC_PORT_5="5100" SIP_SRC_PORT_6="5110" Web User Interface Reference Local SIP Port (Page 125) DSCP_SIP_n Parameter Name Example DSCP_SIP_1, DSCP_SIP_2, ..., DSCP_SIP_6 Value Format INTEGER Description Specifies the DSCP level of DiffServ applied to SIP packets. Value Range 0–63 Default Value...
Page 247: Sip_Tcp_Srv_Prefix_N
5.3.22 SIP Settings Value Format STRING Description Specifies a prefix to add to the domain name when performing a DNS SRV lookup using UDP. Note • This setting is available only when "SIP_DNSSRV_ENA_n" is set to "Y". Value Range Max. 32 characters Default Value _sip._udp.
Page 248: Reg_Interval_Rate_N
5.3.22 SIP Settings REG_INTERVAL_RATE_n Parameter Name Example REG_INTERVAL_RATE_1, REG_INTERVAL_RATE_2, ..., REG_INTERVAL_RATE_6 Value Format INTEGER Description Specifies the percentage of the "expires" value after which to refresh registration by sending a new REGISTER message in the same dialog. Value Range 1–100 Default Value REG_RTX_INTVL_n Parameter Name Example...
Page 249: Sip_Session_Time_N
5.3.22 SIP Settings Value Range • Y: Send un-REGISTER • N: Does not send Default Value SIP_SESSION_TIME_n Parameter Name Example SIP_SESSION_TIME_1, SIP_SESSION_TIME_2, ..., SIP_SESSION_TIME_6 Value Format INTEGER Description Specifies the length of time, in seconds, that the unit waits before terminating SIP sessions when no reply to repeated requests is received.
Page 250: Sip_Timer_T2_N
5.3.22 SIP Settings Default Value Web User Interface Reference T1 Timer (Page 126) SIP_TIMER_T2_n Parameter Name Example SIP_TIMER_T2_1, SIP_TIMER_T2_2, ..., SIP_TIMER_T2_6 Value Format INTEGER Description Specifies the maximum interval, in seconds, between transmissions of SIP messages. For details, refer to RFC 3261. Value Range •...
Page 251: Sip_Timer_D_N
5.3.22 SIP Settings SIP_TIMER_D_n Parameter Name Example SIP_TIMER_D_1, SIP_TIMER_D_2, ..., SIP_TIMER_D_6 Value Format INTEGER Description Specifies the value of SIP timer D (wait time for answer resending), in milliseconds. For details, refer to RFC 3261. Value Range 0, 250–64000 Default Value 5000 SIP_TIMER_F_n Parameter Name Example...
Page 252: Sip_100Rel_Enable_N
5.3.22 SIP Settings SIP_100REL_ENABLE_n Parameter Name Example SIP_100REL_ENABLE_1, SIP_100REL_ENABLE_2, ..., SIP_100REL_ENABLE_6 Value Format BOOLEAN Description Specifies whether to add the option tag 100rel to the "Supported" header of the INVITE message. For details, refer to RFC 3262. • Value Range Y (Enable 100rel function) •...
Page 253: Sub_Interval_Rate_N
5.3.22 SIP Settings SUB_INTERVAL_RATE_n Parameter Name Example SUB_INTERVAL_RATE_1, SUB_INTERVAL_RATE_2, ..., SUB_INTERVAL_RATE_6 Value Format INTEGER Description Specifies the percentage of the "expires" value after which to refresh subscriptions by sending a new SUBSCRIBE message in the same dialog. Value Range 1–100 Default Value SUB_RTX_INTVL_n Parameter Name Example...
Page 254: Add_User_Phone_N
5.3.22 SIP Settings ADD_USER_PHONE_n Parameter Name Example ADD_USER_PHONE_1, ADD_USER_PHONE_2, ..., ADD_USER_PHONE_6 Value Format BOOLEAN Description Specifies whether to add "user=phone" to the SIP URI in SIP messages. • Value Range Y (Add "user=phone") • N (Do not add "user=phone") Note •...
Page 255: Sip_Anm_Hostname_N
5.3.22 SIP Settings SIP_ANM_HOSTNAME_n Parameter Name Example SIP_ANM_HOSTNAME_1, SIP_ANM_HOSTNAME_2, ..., SIP_ANM_HOSTNAME_6 Value Format BOOLEAN Description Specifies whether to set an anonymous host name in the "From" header when making anonymous calls. • Value Range Y (Use "anonymous.invalid" for host name) •...
Page 256: Sip_Rcv_Det_Requri_N
5.3.22 SIP Settings Value Range • Y (Enable username check) • N (Disable username check) Note • If set to "Y", the unit will return an error reply when it receives the INVITE message with an incorrect target SIP URI. •...
Page 257: Sip_Invite_Expire_N
5.3.22 SIP Settings Default Value SIP_INVITE_EXPIRE_n Parameter Name Example SIP_INVITE_EXPIRE_1, SIP_INVITE_EXPIRE_2, ..., SIP_INVITE_EXPIRE_6 Value Format INTEGER Description Specifies the period, in seconds, in which the INVITE message will expire. Value Range 0, 60–65535 (0: Disable) Default Value SIP_FOVR_NORSP_n Parameter Name Example SIP_FOVR_NORSP_1, SIP_FOVR_NORSP_2, ..., SIP_FOVR_NORSP_6 Value Format...
Page 258: Sip_Fovr_Duration_N
5.3.22 SIP Settings Value Format BOOLEAN Description Specifies whether INVITE/SUBSCRIBE will also follow the REGISTER Failover result. Value Range • Y (INVITE/SUBSCRIBE will follow the REGISTER Failover result.) • N (INVITE/SUBSCRIBE will not follow the REGISTER Failover result.) Default Value SIP_FOVR_DURATION_n Parameter Name Example SIP_FOVR_DURATION_1, SIP_FOVR_DURATION_2, ...,...
Page 259: Add_Expires_Header_N
5.3.22 SIP Settings Value Range • Y (Add the port parameter) • N (Do not add the port parameter) Note • Request URI in REGISTER example: – If set to "Y", the port parameter is added to the Request-Line, as follows: Request-Line: REGISTER sip:192.168.0.10:5060 SIP/2.0 –...
Page 260: Transfer_Recall_Tim
5.3.22 SIP Settings Value Range 0–2 – 0: Do not add Diversion header information – 1: Use own diversion information only for the Diversion header – 2: Add diversion information to existing Diversion header Default Value TRANSFER_RECALL_TIM Value Format INTEGER Description Specifies the time that the original call is resumed when the forwarding party does not response by Refer method for call transfer.
Page 261: Rfc5626_Keepalive_Enable_N
5.3.22 SIP Settings Description Specifies the strings that indicates the boundary for Multipart Bodies. Value Range Max. 70 characters Default Value boundary1 RFC5626_KEEPALIVE_ENABLE_n Parameter Name Example RFC5626_KEEPALIVE_ENABLE_1, RFC5626_KEEPALIVE_ENABLE_2, ..., RFC5626_KEEPALIVE_ENABLE_6 Value Format BOOLEAN Description Specifies whether to use Keepalive that defined in RFC5626. Value Range •...
Page 262: Sip_Fork_Mode_N
5.3.22 SIP Settings SIP_FORK_MODE_n Parameter Name Example SIP_FORK_MODE_1, SIP_FORK_MODE_2, ..., SIP_FORK_MODE_6 Value Format BOOLEAN Description Specifies whether to use SIP Fork. Value Range • Y: Use SIP Fork • N: Not use SIP Fork Default Value AKA_AUTHENTICATION_ENABLE_n Parameter Name Example AKA_AUTHENTICATION_ENABLE_1, AKA_AUTHENTICATION_ENABLE_2, ..., AKA_AUTHENTICATION_ENABLE_6...
Page 263: Sdp_User_Id_N
5.3.22 SIP Settings Value Format INTEGER Description Specifies whether to set "a=inactive " or not when the call is on hold. Value Range • 0: send only • 1: inactive Default Value SDP_USER_ID_n Parameter Name Example SDP_USER_ID_1, SDP_USER_ID_2, ..., SDP_USER_ID_6 Value Format STRING Description...
Page 264: Keep_Earlymedia_N
5.3.22 SIP Settings Value Range 0–1 – 0: The unit’s hold tone is played. – 1: The network server’s hold tone (Music on hold) is played. Default Value KEEP_EARLYMEDIA_n Parameter Name Example KEEP_EARLYMEDIA_1, KEEP_EARLYMEDIA_2, ..., KEEP_EARLYMEDIA_6 Value Format BOOLEAN Description Specifies whether to continue Early Media call or not when 18x without SDP is received after Early Media connection is established while making a call.
Page 265: Rfc6947_Draft08_Altc
5.3.23 SIP-TLS Settings Value Range • Y: Adds supported: join • N: Does not add Default Value RFC6947_DRAFT08_ALTC Value Format BOOLEAN Description Specifies whether to support RFC6947 draft08 when the attvalue is not attached after altc. Value Range • Y: Performs ALTC by Draft08 •...
Page 266: Sip_Tls_Mode_N
5.3.23 SIP-TLS Settings Value Range • 0 (UDP) • 1 (TCP) • 2 (TLS) Default Value Web User Interface Reference Transport Protocol (Page 128) SIP_TLS_MODE_n Parameter Name Example SIP_TLS_MODE_1, SIP_TLS_MODE_2, ..., SIP_TLS_MODE_6 Value Format INTEGER Description Select the secure SIP protocol. Value Range •...
Page 267: Sip_Tls_Verify_N
5.3.24 CODEC Settings SIP_TLS_VERIFY_n Parameter Name Example SIP_TLS_VERIFY_1, SIP_TLS_VERIFY_2, ..., SIP_TLS_VERIFY_6 Value Format INTEGER Description Specifies whether to enable the verification of the root certificate. • Value Range 0: No verification • 1: Simple verification • 2: Precise verification Default Value SIP_TLS_ROOT_CERT_PATH Value Format STRING...
Page 268: Codec_Enablex_N
5.3.24 CODEC Settings Description Specifies whether to add an attribute line, "a=fmtp:18 annexb=no", to SDP when the codec is set to "G729A". Value Range • 0: Do not add "a=fmtp:18 annexb=no" • 1: Add "a=fmtp:18 annexb=no" Default Value CODEC_ENABLEx_n Parameter Name Example CODEC_ENABLEx_1, CODEC_ENABLEx_2, ..., CODEC_ENABLEx_6 Value Format BOOLEAN...
Page 269: Dtmf Settings
5.3.25 DTMF Settings Description Specifies the priority order for the codec. Note • The "x" character in the parameter title should be changed to one of the following numbers, according to the codec to be changed. – 0: G.722 – 1: PCMA –...
Page 270: Inbanddtmf_Vol
5.3.26 RTP/RTCP/RTCP-XR Settings Default Value INBANDDTMF_VOL Value Format INTEGER Description Specifies the volume (in decibels [dB]) of in-band DTMF tones. Value Range -46–0 Default Value DTMF_SIGNAL_LEN Value Format INTEGER Description Specifies the length of the DTMF signal, in milliseconds. Value Range 60–200 Default Value DTMF_INTDIGIT_TIM...
Page 271: Max_Delay_N
5.3.26 RTP/RTCP/RTCP-XR Settings Value Format INTEGER Description Specifies the DSCP level of DiffServ applied to RTCP/RTCP-XR packets. Value Range 0–63 Default Value Web User Interface Reference RTCP Packet QoS (DSCP) (Page 134) MAX_DELAY_n Parameter Name Example MAX_DELAY_1, MAX_DELAY_2, ..., MAX_DELAY_6 Value Format INTEGER Description...
Page 272: Rtp_Port_Min
5.3.26 RTP/RTCP/RTCP-XR Settings Description Specifies the initial delay, in 10-millisecond units, of the jitter buffer. Value Range 1–7 (´ 10 ms) Note • This setting is subject to the following conditions: – This value must be greater than or equal to "MIN_DELAY" –...
Page 273: Rtcp_Enable_N
5.3.26 RTP/RTCP/RTCP-XR Settings Description Specifies the diagnose level for received RTP. Value Range • 0: diagnose destination IP Address and port • 1: diagnose destination IP address • 2: diagnose destination port • 3: diagnose nothing Default Value RTCP_ENABLE_n Parameter Name Example RTCP_ENABLE_1, RTCP_ENABLE_2, ..., RTCP_ENABLE_6 Value Format BOOLEAN...
Page 274: Rtp_Close_Enable_N
5.3.27 SRTP Settings Default Value RTP_CLOSE_ENABLE_n Parameter Name Example RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2, ..., RTP_CLOSE_ENABLE_6 Value Format BOOLEAN Description Specifies whether to enable processing to close held RTP sockets. Value Range • Y (Enable RTP Close) • N (Disable RTP Close) Default Value RTCPXR_ENABLE_n Parameter Name Example RTCPXR_ENABLE_1, RTCPXR_ENABLE_2, ..., RTCPXR_ENABLE_6...
Page 275: Srtp_Mix_Conference_Enable_N
5.3.28 VQ Report by PUBLISH SRTP_MIX_CONFERENCE_ENABLE_n Parameter Name Example SRTP_MIX_CONFERENCE_ENABLE_1, SRTP_MIX_CONFERENCE_ENABLE_2, ..., SRTP_MIX_CONFERENCE_ENABLE_6 Value Format BOOLEAN Description Specifies whether to allow conferences where each participant can use either SRTP or RTP. Value Range • Y: Enable • N: Disable Default Value Web User Interface Reference Enable Mixed SRTP &...
Page 276: Vqreport_Collector_Port
5.3.28 VQ Report by PUBLISH Description Specifies the IP address or FQDN of the collector server. Value Range Max. 256 characters Default Value Empty string Web User Interface Reference Server Address (Page 130) VQREPORT_COLLECTOR_PORT Value Format INTEGER Description Specifies the port of the collector server. Value Range 1–65535 Default Value...
Page 277: Alert_Report_Mosq_Warning
5.3.28 VQ Report by PUBLISH Value Range 0–40 Default Value Web User Interface Reference Threshold MOS-LQ (Critical) (Page 131) ALERT_REPORT_MOSQ_WARNING Value Format INTEGER Description Specifies the warning criteria to send VQ report at the time of occurring the MOSQ. Value Range 0–40 Default Value Web User Interface Reference...
Page 278: Uacsta Settings
5.3.29 uaCSTA Settings 5.3.29 uaCSTA Settings UACSTA_ENABLE_n Parameter Name Example UACSTA_ENABLE_1, UACSTA_ENABLE_2, ..., UACSTA_ENABLE_6 Value Format BOOLEAN Description Specifies whether to enable or disable the uaCSTA feature. Value Range • Y: Enable • N: Disable Default Value UACSTA_UNIQUE_ID Value Format STRING Description Specifies the SIP-URI for registering to CSTA server.
Page 279: Csta_Rgstr_Addr
5.3.29 uaCSTA Settings Default Value 5060 CSTA_RGSTR_ADDR Value Format STRING Description Specifies the IP address or FQDN of the registrar server for CSTA. Value Range Max. 256 characters Default Value Empty string CSTA_RGSTR_PORT Value Format INTEGER Description Specifies the port of the registrar server for CSTA. Value Range 1–65535 Default Value...
Page 280: Csta_Rgstr_Pass
5.3.30 Telephone Settings Value Range Max. 128 characters Default Value Empty string CSTA_RGSTR_PASS Value Format STRING Description Specifies the authentication password for received REGISTER. Value Range Max. 128 characters Default Value Empty string 5.3.30 Telephone Settings POWER_ON_DISPLAY_LOGO_PATH Value Format STRING Description Specifies URI for logo image file displayed when power is turned on.
Page 281: Pound_Key_Delimiter_Enable
5.3.30 Telephone Settings Web User Interface Reference Inter-digit Timeout (Page 138) POUND_KEY_DELIMITER_ENABLE Value Format BOOLEAN Description Specifies whether the # key is treated as a regular dialed digit or a delimiter, when dialed as or after the second digit. Value Range •...
Page 282: Number_Matching_Upper_Digit
5.3.30 Telephone Settings NUMBER_MATCHING_UPPER_DIGIT Value Format INTEGER Description Specifies the maximum number of digits with which to match a phonebook entry with an incoming call’s caller ID. Value Range 0–15 Default Value FLASH_RECALL_TERMINATE Value Format BOOLEAN Description Specifies the function of the FLASH/RECALL button during a conversation.
Page 283: Num_Plan_Park_Retrieving
5.3.30 Telephone Settings Value Range • Y: Enable • N: Disable Default Value Web User Interface Reference Enable Call Park Key (Page 140) NUM_PLAN_PARK_RETRIEVING Value Format STRING Description Specifies the park retrieve number. Value Range 0–4 digits (0–9,*, #) Default Value Empty string Web User Interface Reference Park Retrieve Number (Page 140)
Page 284: Hold_Transfer_Operation
5.3.30 Telephone Settings HOLD_TRANSFER_OPERATION Value Format BOOLEAN Description Specifies whether to transfer a call by Hold button. • Value Range Y: Enable (Press the Hold button to transfer a call.) talk ® hold ® 2nd talk ® Transfer (or on-hook) •...
Page 285: Sys_Lock_Password
5.3.31 Flexible Key Settings Description Specifies whether to enable locking the unit. Value Range • Y: Enable • N: Disable Default Value Web User Interface Reference Enable IP Phone Lock (Page 118) SYS_LOCK_PASSWORD Value Format STRING Description Specifies the password for unlocking the unit. Value Range Null, 4 digits (0–9) Default Value...
Page 286: Flex_Button_Facility_Argx
5.3.31 Flexible Key Settings Value Format STRING Description x=1–24 Specifies a particular Facility Action for the flexible key. No facility action will be taken for the button if the string is empty or invalid. Note • If this parameter is specified, "FLEX_BUTTON_QUICK_DIALx"...
Page 287: Flex_Button_Quick_Dialx
5.3.32 DSS Key Settings Value Format STRING Description x=1–24 Specifies the name of flexible key to be displayed on the screen. Value Range Max. 20 characters Note • You can use Unicode characters for this setting. Default Value Empty string Web User Interface Reference Label Name (Page 149) FLEX_BUTTON_QUICK_DIALx...
Page 288: Dss_Button_Facility_Argx
5.3.32 DSS Key Settings Description x=1–200 Specifies a particular Facility Action for the flexible key. No facility action will be taken for the button if the string is empty or invalid. Note • If this parameter is specified, "DSS_BUTTON_QUICK_DIALx" should be an empty string. Value Range X_PANASONIC_IPTEL_LINE, X_PANASONIC_IPTEL_ONETOUCH,...
Page 289: Dss_Button_Quick_Dialx
5.3.33 Tone Settings Description x=1–200 Specifies the name of flexible key to be displayed on the screen. Value Range Max. 20 characters Note • You can use Unicode characters for this setting. Default Value Empty string Web User Interface Reference Label Name (Page 157) DSS_BUTTON_QUICK_DIALx Parameter Name Example...
Page 290: Outside_Dial_Tone_Timing
5.3.33 Tone Settings Description Specifies whether Second Dial Tone is repeated. Value Range 0: No Repeat 1: Repeat Default Value OUTSIDE_DIAL_TONE_TIMING Value Format Comma-separated Integer Description Specifies the pattern, in milliseconds, of Second Dial Tone using Max. 10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas. Value Range 0–16000 (msec) (0=Continuous) Default Value...
Page 291: Tone_Len_Disconnect
5.3.33 Tone Settings TONE_LEN_DISCONNECT Value Format INTEGER Description Specifies the duration, in seconds, that a disconnect tone will be heard when the other party ends a call and the unit is being used. Value Range 1–15 (s) Default Value DIAL_TONE1_FRQ Value Format Comma-separated Integer Description...
Page 292: Dial_Tone2_Frq
5.3.33 Tone Settings Description Specifies the pattern, in milliseconds, of Dial Tone 1 using up to 10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas. Note • It is recommended that you set a value of 60 milliseconds or more for the first value (off 1).
Page 293: Dial_Tone4_Frq
5.3.33 Tone Settings Description Specifies the pattern, in milliseconds, of Dial Tone 2 using up to 10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas. Note • It is recommended that you set a value of 60 milliseconds or more for the first value (off 1).
Page 294: Busy_Tone_Frq
5.3.33 Tone Settings Description Specifies the pattern, in milliseconds, of Dial Tone 4 (stutter dial tones) to notify that a voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2, on 2…) separated by commas. Note •...
Page 295: Busy_Tone_Timing
5.3.33 Tone Settings BUSY_TONE_TIMING Value Format Comma-separated Integer Description Specifies the pattern, in milliseconds, of busy tones using up to 10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas. Note • It is recommended that you set a value of 60 milliseconds or more for the first value (off 1).
Page 296: Reorder_Tone_Timing
5.3.33 Tone Settings REORDER_TONE_TIMING Value Format Comma-separated Integer Description Specifies the pattern, in milliseconds, of reorder tones using up to 10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas. Note • It is recommended that you set a value of 60 milliseconds or more for the first value (off 1).
Page 297: Ringback_Tone_Timing
5.3.33 Tone Settings RINGBACK_TONE_TIMING Value Format Comma-separated Integer Description Specifies the pattern, in milliseconds, of ringback tones using up to 10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas. Note • It is recommended that you set a value of 60 milliseconds or more for the first value (off 1).
Page 298: Cw_Tone1_Gain
5.3.33 Tone Settings CW_TONE1_GAIN Value Format INTEGER Description Specifies the gain, in decibels, of call waiting tone 1. Value Range -24–6 (dB) Default Value HOLD_TONE_FRQ Value Format Comma-separated Integer Description Specifies the dual-tone frequencies, in hertz, of the hold tone using 2 whole numbers separated by a comma.
Page 299: Bell_Core_Pattern3_Timing
5.3.33 Tone Settings Description Specifies the cadence, in milliseconds, of pattern ID 2, described in the LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14, using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by commas.
Page 300: Call Control Settings
5.3.34 Call Control Settings Value Range 0–5000 (0: Continuous) Note • Avoid setting 1–50 for any of the values. Default Value 5.3.34 Call Control Settings DEFAULT_LINE_SELECT Value Format INTEGER Description Specifies the line used to make an outgoing call when no line is specified in the dialing operation.
Page 301: Hotline_Enable
5.3.34 Call Control Settings Description Specifies whether to accept or reject the incoming call without the called party’s phone number. Value Range • Y: Enable anonymous call block • N: Disable Default Value Web User Interface Reference Enable Block Anonymous Call (Page 143) HOTLINE_ENABLE Value Format BOOLEAN...
Page 302: Vm_Subscribe_Enable
5.3.34 Call Control Settings Description Specifies the name to display as the caller on the other party’s phone when you make a call. Value Range Max. 24 characters Note • You can use Unicode characters for this setting. Default Value Empty string Web User Interface Reference Display Name (Page 142)
Page 303: Dial_Plan_Not_Match_Enable_N
5.3.34 Call Control Settings Value Range Max. 1000 characters Default Value Empty string Web User Interface Reference Dial Plan (max 1000 columns) (Page 147) DIAL_PLAN_NOT_MATCH_ENABLE_n Parameter Name Example DIAL_PLAN_NOT_MATCH_ENABLE_1, DIAL_PLAN_NOT_MATCH_ENABLE_2, ..., DIAL_PLAN_NOT_MATCH_ENABLE_6 Value Format BOOLEAN Description Specifies whether to enable dial plan filtering so that a call is not made when the dialed number does not match any of the dial formats specified in "DIAL_PLAN_n".
Page 304: Country_Calling_Code
5.3.34 Call Control Settings Value Range Max. 8 characters (consisting of 0–9, *, and #) Note • No other characters are allowed. Default Value Empty string Web User Interface Reference International Call Prefix (Page 139) COUNTRY_CALLING_CODE Value Format STRING Description Specifies the country/area calling code to be used for comparative purposes when dialing a number from the incoming call log that contains a "+"...
Page 305: Idle_Soft_Key_B
5.3.34 Call Control Settings IDLE_SOFT_KEY_B Value Format INTEGER Description Specifies the soft key (B) during IDLE state. • Value Range 1: Phonebook • 2: Menu • 3: Outgoing Call Log • 4: Incoming Call Log • 5: Redial • 6: Page Default Value Web User Interface Reference Soft Key B (Center) (Page 118)
Page 306: Emergency_Callx
5.3.34 Call Control Settings EMERGENCY_CALLx Parameter Name Example EMERGENCY_CALL1, EMERGENCY_CALL2, …, EMERGENCY_CALL5 Value Format STRING Description Specifies the emergency number. (Up to 5 emergency numbers) Value Range Max. 32 characters (except &, ", ', :, ;, <, >) Default Value Empty string Web User Interface Reference 1–5 (Page 141)
Page 307: Shared_Call_Enable_N
5.3.34 Call Control Settings Value Range • Y: Enable • N: Disable Default Value Web User Interface Reference Enable Call Park Notification (Page 146) SHARED_CALL_ENABLE_n Parameter Name Example SHARED_CALL_ENABLE_1, SHARED_CALL_ENABLE_2, ..., SHARED_CALL_ENABLE_6 Value Format BOOLEAN Description Specifies whether to enable the Shared Call feature of the SIP server, which is used to share one line among the units.
Page 308: Moh_Server_Uri_N
Value Format INTEGER Description Specifies the mode of FWD/DND synchronizing with server. Value Range • 1: as feature event • 2: Panasonic original • 3: Entel Default Value HOLD_AND_CALL_ENABLE Value Format BOOLEAN Description Specifies whether making new call after holding the call or not.
Page 309: Auto_Call_Hold
5.3.34 Call Control Settings AUTO_CALL_HOLD Value Format BOOLEAN Description Specifies whether calls are disconnected or held when an other line is selected while having a conversation. Value Range • Y (Enable Auto Call Hold) • N (Disable Auto Call Hold) Default Value SIP_RESPONSE_CODE_DND Value Format...
Page 310: Conference_Server_Uri
5.3.35 Logging Settings Value Range • Y (Volume returns to the default setting after each call) • N (Volume does not change after each call) Default Value CONFERENCE_SERVER_URI Value Format STRING Description Specifies the URI for a conference server, which consists of "sip:", a user part, the "@"...
Page 311: Logging_Level_Dns
5.3.35 Logging Settings Description Specifies the port of Syslog server. Value Range 1–65535 Default Value LOGGING_LEVEL_DNS Value Format INTEGER Description Specifies the log level of DNS. Value Range 0–6 Default Value LOGGING_LEVEL_NW1 Value Format INTEGER Description Specifies the log level of SNTP. Value Range 0–6 Default Value...
Page 312: Logging_Level_Stun
5.3.35 Logging Settings Default Value LOGGING_LEVEL_STUN Value Format INTEGER Description Specifies the log level of STUN. Value Range 0–6 Default Value LOGGING_LEVEL_NW2 Value Format INTEGER Description Specifies the log level of Xsi, XML, XMPP, LDAP. Value Range 0–6 Default Value LOGGING_LEVEL_CFGPARSE Value Format INTEGER...
Page 313: Document Version 2015-07 Administrator Guide
Section 6 Useful Telephone Functions This section explains phone number settings, dial plan settings, the phonebook import/export function, the Broadsoft XSI function, the BroadCloud (Presence) function and Pairing (Parallel Mode). Document Version 2015-07 Administrator Guide...
Page 314: Phonebook Import And Export
6.1 Phonebook Import and Export 6.1 Phonebook Import and Export This section explains how to import and export phonebook data. Phonebook data of the unit includes names and phone numbers. Phonebook data on the unit can be exported, edited with editor tools, and imported again. In addition, phonebook data created with other software can be imported into the unit.
Page 315: Import/Export File Format
6.1 Phonebook Import and Export Importing the Same Phonebook Data to other Units You can export the phonebook data created on a unit to a PC, and then import it into other units. You can also import phonebook data created on a PC to other units. Import/Export File Format The file format used for importing and exporting the phonebook data is "TSV".
Page 316: Import/Export Operation
6.1.1 Import/Export Operation Phonebook Data in Text Format Aaron MacDowel 1234001 Barbara Nicolls 1234002 Carl O’Brien 1234003 Dorothy Parker 1234004 ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· ···· A Record ID (Unique ID: 1–500) B Tab C Name (up to 24 characters) D Tab...
Page 317: Editing With Microsoft Excel
6.1.2 Editing with Microsoft Excel On the "Now Processing File Data" screen, click the text "HERE" in the displayed message, or wait until File Download window appears. Note • Depending on the security settings of your Web browser, pop-up menus might be blocked. If the file cannot be exported successfully, try the export operation again or change the security settings of your Web browser.
Page 318 6.1.2 Editing with Microsoft Excel Select All Files for the file type, select the exported phonebook data file, and click Open. On the Text Import Wizard - Step 1 of 3 window, click Next. Note • Regardless of what is selected for File origin, the file will be processed normally if the format is appropriate.
Page 319: Exporting Data From Microsoft Outlook
6.1.3 Exporting Data from Microsoft Outlook On the Text Import Wizard - Step 3 of 3 window, select all columns in Data preview, select Text in Column data format, and then click Finish. The TSV file will be opened. Note •...
Page 320: Dial Plan
6.2.1 Dial Plan Settings On the Export to a File window, click Finish. The data will be exported. Note • You can export data from Microsoft Outlook Express by using a similar procedure. It is also possible to export data from other applications that are compatible with Microsoft Excel. •...
Page 321 6.2.1 Dial Plan Settings Element Available Value Description Wildcard X, x Example: "12xxxxx" If the dialed phone number is "12" followed by any 5-digit number, the call is made immediately. Range Example: "[123]" If the dialed phone number is either one of "1", "2", or "3", the call is made immediately.
Page 322: Flexible Keys
6.3 Flexible Keys "DIAL_PLAN_NOT_MATCH_ENABLE_n" is set to "N" in a configuration file. The unit recognizes the end of dialing as follows: – The inter-digit timer expires (® see [Inter-digit Timeout] in 4.6.1.1 Call Control in the Web user interface or "INTDIGIT_TIM" in 5.3.30 Telephone Settings in the configuration file). –...
Page 323 6.3 Flexible Keys The following types of flexible keys are available: Button Description Lamp Indication One Touch Used to dial a previously set phone number with – Dial one touch. BLF (Busy Used to show the current status of another Off: The BLF extension is idle.
Page 324 6.3 Flexible Keys Button Description Lamp Indication Wrap Up The Wrap Up button alternates the setting of Off: Ready mode for incoming calls Wrap Up mode, Not Ready mode or Ready mode Red on: Unavailable for incoming calls. Flashing red slowly: Wrap Up In Wrap Up mode/Not Ready mode for incoming calls, incoming calls will not be received through the ACD (Automatic Call Distribution) group.
Page 325: Settings Using Web User Interface Programming
6.3.1 Settings using Web User Interface Programming Button Description Lamp Indication Transfer Used to transfer a call to the assigned extension in the key with confirmation, during a – conversation. Blind Used to transfer a call to the assigned extension Transfer in the key without confirmation, during a –...
Page 326 6.3.1 Settings using Web User Interface Programming Parameter 1 Parameter 2 Button Description Value Description Value Call History Classification • 0: Call History • 1: Missed Calls – – • 2: Incoming Calls • 3: Outgoing Calls Simultaneo Line No. 1–6 –...
Page 327: Settings Using Configuration File Programming
6.3.2 Settings using Configuration File Programming [Setting Example] The following screen shows an example of setting flexible keys. Description: • Button 1 is set to log in and log out of an ACD group on line 6. • Buttons 2, 6 and 10 are set to show the status of a certain extension. They can also be used to call that extension and transfer calls to it.
Page 328 6.3.2 Settings using Configuration File Programming Parameter 1 Parameter 2 Value Value 1 Value 2 Note X_PANASONIC_I Phone Number Line Number The total maximum number of PTEL_ONETOUC (Max. 32 (1–6) characters is 34. characters) Line 1 is set when value 2 is "1", "0", or "None".
Page 329 6.3.2 Settings using Configuration File Programming Parameter 1 Parameter 2 Value Value 1 Value 2 Note X_PANASONIC_I Phone Number PTEL_BLINDTRA (Max. 32 – – NSFER characters) X_PANASONIC_I Phone Number PTEL_CONFERE (Max. 32 – – characters) X_PANASONIC_I Phone Number Line Number PTEL_DIRECTPIC (Max.
Page 330: Broadsoft Xsi (Xtended Services Interface)
IP phone (the KX-HDV230) to "Anonymous Call". (5) Call Forward The Call Forward function forwards incoming calls to an IP phone (the KX-HDV230) to a specified phone number. * When Feature Key Synchronization is set (FWD_DND_SYNCHRO_ENABLE_n="Y", see Page 307), the Call Forward function will not operate as an XSI function.
Page 331: Xsi Service Settings
6.4.2 XSI Service Settings 6.4.2 XSI Service Settings Phone settings for using XSI services can be set using configuration parameters or the Web user interface (administrators only). See 4.3.7 Xtended Service Settings for making settings using the Web user interface. The following parameter names will be displayed and can be set as needed.
Page 332: Broadcloud (Presence)
6.5.2 BroadCloud (Presence) Function Settings 6.5 BroadCloud (Presence) 6.5.1 Outline The KX-HDV230 supports the following BroadCloud functions. (1) BroadCloud Buddies View the information of your Buddies. (2) BroadCloud Favorites View the information of your Buddies that have been marked as Favorites.
Page 333: Firmware Update
Section 7 Firmware Update This section explains how to update the firmware of the unit. Document Version 2015-07 Administrator Guide...
Page 334: Firmware Server Setup
7.3 Executing Firmware Update 7.1 Firmware Server Setup No special server is necessary for the firmware update. You can use an HTTP, HTTPS, FTP, or TFTP server as the firmware server by simply setting its URL. Note • It is recommended to select a time for updating in which the unit will not be used. (For details about the timing of updating configuration files, see 2.2.4 Downloading Configuration Files.) 7.2 Firmware Update Settings Firmware updates are provided by the manufacturer when necessary.
Page 335 For details about setting the timing of when configuration files are downloaded, see 2.2.4 Downloading Configuration Files. A Provisioning Server Address B Configuration File KX-HDV230 Provisioning Server Step 2 The unit compares the version number of the firmware in the configuration file to the unit’s current firmware version.
Page 336: Upgrade Firmware
7.4 Upgrade Firmware 7.4 Upgrade Firmware When an updated version of the firmware is provided on a Web site or other means, you can perform the firmware update manually using Web user interface programming. For details about the manual firmware update, see 4.7.3 Upgrade Firmware. To manually update the firmware In the Web user interface, click the [Maintenance] tab, and then click [Upgrade Firmware].
Page 337: Troubleshooting
Section 8 Troubleshooting This section provides information about troubleshooting. Document Version 2015-07 Administrator Guide...
Page 338: Troubleshooting
8.1 Troubleshooting 8.1 Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the unit from the AC outlet, then connect the AC adaptor again. If using PoE, disconnect the LAN cable, then connect the LAN cable again. General Use Problem Cause/Solution...
Page 339: Document Version
8.1 Troubleshooting Making/Answering Calls, Intercom Problem Cause/Solution The unit does not ring. • Check the VoIP status in the Web user interface and confirm that each line is registered properly (® see To check the setting status in the Web user interface in this section).
Page 340: Error Codes
8.1 Troubleshooting Time Problem Cause/Solution The time is not correct. • In the Web user interface, you can set NTP synchronization and DST (Summer Time) control to adjust the time automatically (® see 4.4.4 Time Adjust Settings). • If the time is still incorrect even after setting NTP synchronization, check the firewall and port forwarding settings on the router.
Page 341 8.1 Troubleshooting [ ]/[ ]: "Status" ® Export Logging File Export the log file using the Web user interface (→ see 4.7.4 Export Logging File). Document Version 2015-07 Administrator Guide...
Page 342 Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd. Panasonic System Networks Co., Ltd. 2015...

Panasonic KX-HDV230 Administrator's Manual

1 Initial Setup

2 General Information on Provisioning

3 Phone User Interface Programming

4 Web User Interface Programming

Quick Links

SIP Phone

Troubleshooting

Related Manuals for Panasonic KX-HDV230

Summary of Contents for Panasonic KX-HDV230