Canon GP405 Service Manual page 396

Hide thumbs Also See for GP405:

Table of Contents

CHAPTER 12 INSTALLATION

5) If group control is not planned, go to step

11). If group control is planned, set the

method of input, mode of control, and

paper size to suit the needs of the user.

Shift 3 of the DIP switch (SW5-3) of the

copy data controller to ON.

Figure 12-513

6) Connect the connector [3] of the Keypad-

A1 to the connector J3 [4] of the copy data

Figure 12-514

7) Press the switch (SW2) on the copy data

controller to start service mode.

Figure 12-515

8) Set the method of input.

8-1) Set the card/ID input using the Keypad-

A1. (Initially, card input is selected.)

8-2) To change from card input to ID input,

perform the following:

To change from ID input t card input

(requires a Card Reader-1), go to 8-4).

MANAGE=CARD will be indicated.

8-3) Press the 2 key, and press the ENT key.

MANAGE=ID will be indicated.

8-4) To change to card input,

When MANAGE=ID is indicated,

the 1 key and then the ENT key.

MANAGE=CARD will be indicated.

Table 11-502

Show Quick Links

Chapters

Table of Contents