Power Connector Cable - HP pavilion series Maintenance And Service Manual
(model numbers 14-av001 through 14-av099
Hide thumbs
Also See for pavilion series:
- Reference manual (175 pages) ,
- Quick start manual (152 pages) ,
- User manual (130 pages)
Table of Contents
Advertisement
Reverse this procedure to install the speakers.
Power connector cable
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
a.
Battery (see
b.
WLAN module (see
c.
Fan (see
d.
System board (see
Remove the power connector cable:
▲
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
40
Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page
26)
WLAN module on page
Fan on page
33)
System board on page
24), and then remove the following components:
29)
34)
Spare part number
808155-010
Advertisement
Table of Contents
