Card Reader Board - HP pavilion series Maintenance And Service Manual
(model numbers 14-av001 through 14-av099
Hide thumbs
Also See for pavilion series:
- Reference manual (175 pages) ,
- Quick start manual (152 pages) ,
- User manual (130 pages)
Table of Contents
Advertisement
Card reader board
NOTE:
The card reader board spare part kit does not include the card reader board cable. The card reader
board cable is available using spare part number 856204-001.
Description
Card reader board
Before removing the card reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the card reader board:
1.
Release the ZIF connector (1) to which the card reader board cable is connected, and then disconnect
the card reader board cable from the system board.
2.
Detach the card reader board cable (2) from the keyboard/top cover. (The card reader board cable is
attached to the keyboard/top cover with double-sided adhesive.)
3.
Remove the Phillips PM2.0×2.2 broad head screw (3) that secures the card reader board to
the keyboard/top cover.
4.
Release the card reader board (4) by sliding it to the right until it clears the retention clip (5) built into
the keyboard/top cover.
Bottom cover on page
Battery on page
26).
24).
Component replacement procedures
Spare part number
863315-001
31
Advertisement
Table of Contents
