Connections (With Scart Leads) - Panasonic DMR-E60 Operating Instructions Manual
Hide thumbs
Also See for DMR-E60:
- Operating instructions manual (64 pages) ,
- Firmware instructions (6 pages) ,
- Operating instructions manual (75 pages)
Table of Contents
Advertisement
Follow the step-by-step guide below.
AV2 (DECODER/EXT) 21-pin Scart socket
AC Input socket
AC Mains lead (supplied)
Satellite Receiver (not supplied)
6
To AC Mains socket
21-pin Scart socket (TV)
1
Connect the aerial to the RF Input socket of the DVD
Recorder.
RF IN
This unit
R - AUDIO - L
OPTICAL
DIGITAL AUDIO OUT
(PCM/BIT STREAM)
R - AUDIO - L
2
Connect the RF lead from the RF Output socket of
the DVD Recorder to the TV aerial input socket.
This unit
R - AUDIO - L
OPTICAL
RF OUT
DIGITAL AUDIO OUT
(PCM/BIT STREAM)
R - AUDIO - L
3
Connect the AV1 21-pin scart socket to TV scart
socket (optional).
≥This is necessary for Download from TV with Q Link function.
≥If you use Panasonic TV with RGB output capability and want
to receive RGB signals, connect this unit to the AV1 socket
on the TV.
This unit
AV1 ( TV )
4
Connect the AV2 21-pin scart socket to the DVD
Recorder Scart Socket on your Satellite Receiver/
Digital Sat receiver. If you are not connecting a
Satellite Receiver, skip this step. (See pages 15, 58)
This unit
Satellite Receiver
AV2 ( DECODER/DECODEUR/EXT )
Connections (with Scart leads)
RF Output socket
AV1 (TV) 21-pin Scart socket
R - AUDIO - L
VIDEO
S-VIDEO
OPTICAL
DIGITAL AUDIO OUT
R - AUDIO - L
VIDEO
S-VIDEO
(PCM/BIT STREAM)
6
21-pin Scart socket (DVD)
RF IN
VIDEO
S-VIDEO
AV1 (TV)
RF OUT
AV2 (DECODER/EXT)
VIDEO
S-VIDEO
TV
RF IN
VIDEO
S-VIDEO
AV1 (TV)
RF OUT
AV2 (DECODER/EXT)
VIDEO
S-VIDEO
RF IN
R - AUDIO - L
VIDEO
S-VIDEO
AV1 (TV)
OPTICAL
RF OUT
DIGITAL AUDIO OUT
AV2 (DECODER/EXT)
R - AUDIO - L
VIDEO
S-VIDEO
(PCM/BIT STREAM)
RF IN
R - AUDIO - L
VIDEO
S-VIDEO
AV1 (TV)
OPTICAL
DIGITAL AUDIO OUT
RF OUT
AV2 (DECODER/EXT)
(PCM/BIT STREAM)
R - AUDIO - L
VIDEO
S-VIDEO
RF Input socket
Aerial
(not supplied)
1
RF IN
Aerial Input
AV1 (TV)
socket
RF OUT
AV2 (DECODER/EXT)
2
RF lead
(supplied)
3
Necessary for
TV with Q Link
4
Necessary for Connecting
a Satellite Receiver
5
5
Connect the TV scart socket of your Satellite
Receiver to the AV1 scart socket of your TV
(optional). If you are not connecting a Satellite
Receiver, skip this step.
6
Plug the TV, DVD Recorder and Satellite Receiver
into the mains as shown at top of the page.
Hint
≥Q Link offers a range of convenient functions. For example,
downloading of the tuning positions of all available television
stations into your unit's memory if you connect the unit to your
television with a fully wired 21-pin Scart cable (not supplied).
Features similar to Q Link have different names and may not
work the same.
- [Q Link] is a registered trademark of Panasonic.
- [DATA LOGIC] is a registered trademark of Metz.
- [Easy Link] is a registered trademark of Philips.
- [Megalogic] is a registered trademark of Grundig.
- [SMARTLINK] is a registered trademark of Sony.
TV
For details, refer to your television's operating instructions or
consult your dealer.
≥Unlike in most commercially available 21-pin Scart cables, all 21
pins of one plug on a fully wired 21-pin Scart cable are connected
to the matching pins on the other end of the cable.
Reference:
≥If the TV set is equipped with a 21-pin scart socket that features
Y/C signal separation, set the "AV1 Output" to "S-Video"
(see page 63) so that you can play back with high picture quality
and use a fully-wired 21-pin Scart lead (not supplied) to connect
the DVD Recorder to the TV.
13
TV [with or without Q link function]
(not supplied)
AV2 socket
AV1 socket
6
To AC Mains socket
Note:
21-pin Scart leads are not supplied.
Satellite Receiver
TV
Hide quick links:
Advertisement
Table of Contents
