Table of Contents
Advertisement
Progressive video
≥ This problem is caused by the editing method or material
There is ghosting
when progressive
used on DVD-Video, but should be corrected if you use
output is on.
interlace output. Change "VIDEO OUT (I/P)" in "VIDEO" tab
to "INTERLACE". (14)
≥ If the unit is connected to the television through VIDEO OUT
Pictures not in
progressive
or S VIDEO OUT
output.
≥ When progressive output is on, closed captions will not be
Closed captions
§1
not displayed.
displayed.
Sound incorrect
≥ Set Advanced Surround to "OFF". (13)
Sound distorted.
≥ Set Attenuator to "ON" if it causes distortion. (13)
≥ If you have connected a digital amplifier which does not
Piercing noise
comes from the
include decoder, be sure to set "DOLBY DIGITAL", "MPEG
speakers.
to "PCM" and set "DTS" to "OFF" in "AUDIO" tab. (15)
≥ None of the audio effects work when the unit is outputting
Effects do not
work.
bitstream signals from the COAXIAL terminal. (6)
≥ Some audio effects do not work or have less effect with
some discs.
Recording
≥ You cannot record MP3.
Cannot record to
≥ You cannot record DVDs that have protection preventing
digital recording
equipment.
digital recording.
≥ You cannot record DVDs if the recording equipment cannot
(Incorrect sound
recorded.)
handle signals with a sampling frequency of 48 kHz.
≥ Make the following settings:
– Advanced Surround:
– DOWN SAMPLING:
– DOLBY DIGITAL/MPEG
– DTS:
§2
, output will be interlace.
OFF (13)
ON (15)
§3
:
PCM (15)
OFF (15)
Unit displays
≥ You inserted a disc the unit cannot play; insert one it can. (4)
"noPLAy"
≥ You inserted a blank disc.
≥ You inserted a disc that has not been finalized. (4)
≥ The disc may be dirty. (18)
"U11"
≥ You haven't inserted the disc correctly: Insert it correctly. (8)
≥ Trouble may have occurred. The number following "H"
"H∑∑"
(∑∑ stands for a
depends on the status of the unit. Turn the unit off and then
number.)
back to ON. Alternatively, turn the unit off, disconnect the AC
mains lead, and then reconnect it.
≥ If the service numbers fail to clear, note the service number
and contact a qualified service person.
≥ You haven't inserted a disc: Insert one.
"nodISC"
≥ You haven't inserted the disc correctly: Insert it correctly. (8)
§3
Television displays
≥ The operation is prohibited by the unit or disc.
"/"
≥ You haven't inserted a disc: Insert one.
"NODISC"
≥ You inserted a disc the unit cannot play; insert one it can. (4)
"THIS TYPE OF
≥ You inserted a disc that has not been finalized. (4)
DISC CANNOT BE
≥ You inserted a blank disc.
PLAYED. PLEASE
INSERT A
DIFFERENT
DISC."
≥ You can only play DVD-Video if their region number is the
"THIS DISC MAY
NOT BE PLAYED
same or includes the same region number as the unit or if
IN YOUR
the DVD-Video is marked "ALL". Confirm the region number
REGION."
for the unit on the rear panel. (Cover)
[Unit\with\PX\printed\on\the\outer\packaging]
§1
§2
[Except[The\United\Kingdom]
[The\United\Kingdom,\Australia\and]N.Z.]
§3
17
Hide quick links:
Advertisement
Table of Contents
