Table of Contents
Advertisement
Quick Links
Specifications
Power supply:
Power consumption:
Power consumption in standby mode:
approx. 1 W
Dimensions:
Mass:
Signal system:
Operating temperature range:
Operating humidity range:
Region number:
Discs played [8 cm or 12 cm]:
(1)
DVD (DVD-Video)
(2)
DVD-RAM (DVD-VR compatible, JPEG formatted discs)
(3)
DVD-R/RW/+R/+RW (DVD-Video compatible)
(4)
CD-Audio (CD-DA)
(5)
SVCD (Conforming to IEC62107)
(6)
CD, CD-R/CD-RW (CD-DA, Video CD, SVCD, MP3, WMA,
JPEG formatted discs)
(7)
MP3/WMA
lThe total combined maximum number of recognizable
audio and picture contents and groups:
lCompatible compression rate:
MP3:
WMA:
(8)
JPEG
lExif Ver 2.1 JPEG Baseline files
lThe total combined maximum number of recognizable
audio and picture contents and groups:
AC220-240 V, 50/60 Hz
11 W
430 (W)×249 (D)×43 (H) mm
2.2 kg
NTSC, PAL 625/50, PAL
525/60
+5 to +35°C
5 to 90 % RH (no
condensation)
Region No.3
4000 audio and picture
contents and 400 groups.
between 32 kbps and 320 kbps
between 48 kbps and 320 kbps
4000 audio and picture
contents and 400 groups.
DVD-K29GCS
DL4.1 Mechanism Series
Colour
(S).......................Silver Type
lPicture resolution:
(9)
HighMAT Level 2 (Audio and Image)
Video output:
Output level:
Output terminal:
S video output:
Y output level:
C output level:
Output terminal:
Component video output:
Y output level:
P
output level:
B
P
output level:
R
Output terminal:
Number of terminals:
Audio output:
Output level:
Output terminal:
Number of terminals:
2 channel:
Audio performance:
(1)
Frequency response:
lDVD (linear audio):
lCD audio:
(2)
S/N ratio:
lCD audio:
(3)
Dynamic range:
lDVD (linear audio):
© 2005 Matsushita Electric Industrial CO., Ltd. All
rights
reserved.
distribution is a violation of law.
ORDER NO.CHM0505009CE
DVD / CD Player
between 320×240 and
6144×4096 pixels
(Sub sampling is 4:2:2 or 4:2:0)
1 Vp-p (75 Ω)
Pin jack (1 system)
1 Vp-p (75 Ω)
NTSC; 0.286 Vp-p (75 Ω)
PAL; 0.300 Vp-p (75 Ω)
S terminal (1 system)
[NTSC: 525(480)p / 525(480)i,
PAL: 625(576)p / 625(576)i]
1 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
Pin jack (Y: green, P
: bule,
B
P
: red)
R
1 system
2 Vrms (1 kHz, 0 dB)
Pin jack
1 system
4 Hz-22 kHz (48 kHz sampling)
4 Hz-44 kHz (96 kHz sampling)
4 Hz-20 kHz
115 dB
100 dB
Unauthorized
copying
and
Advertisement
Table of Contents
Related Manuals for Panasonic DVD-K29GCS
Summary of Contents for Panasonic DVD-K29GCS
-
Page 1: Specifications
Ver 2.1 JPEG Baseline files lThe total combined maximum number of recognizable audio and picture contents and groups: 4000 audio and picture contents and 400 groups. DVD-K29GCS DL4.1 Mechanism Series Colour (S)...Silver Type lPicture resolution: HighMAT Level 2 (Audio and Image) -
Page 2: Table Of Contents
DVD-K29GCS lCD audio: Total harmonic distortion: lCD audio: Digital audio output: Coaxial digital output: Pickup Wave length: Laser power: Note: Specifications are subject to change without notice. Mass and dimensions are approximate. Solder: This model uses lead free solder (PbF). - Page 3 16.4. MODULE P.C.B. (2/2) (FOIL SIDE) 16.5. OPERATION P.C.B. & MIC P.C.B. 17 EXPLODED VIEWS 17.1. CASING PARTS & MECHANISM SECTION EXPLODED VIEW 17.2. MECHANISM SECTION EXPLODED VIEW 17.3. PACKING & ACCESSORIES SECTION EXPLODED VIEW 18 REPLACEMENT PARTS LIST DVD-K29GCS...
-
Page 4: Safety Precautions
DVD-K29GCS 1 SAFETY PRECAUTIONS 1.1. GENERAL GUIDELINES 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed. -
Page 5: Precaution Of Laser Diode
· Pb free solder will tend to splash when heated too high (about 1100°F/ 600°C). When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the soldering points with the Pb free solder until it melts enough. DVD-K29GCS... -
Page 6: Prevention Of Static Electricity Discharge
DVD-K29GCS 5 PREVENTION OF STATIC ELECTRICITY DISCHARGE The laser diode in the traverse unit (optical pickup) may brake down due to static electricity of clothes or human body. Use due caution to electrostatic breakdown when servicing and handling the laser diode. -
Page 7: Disassembling The Casing And Checking P.c.b.s
6 DISASSEMBLING THE CASING AND CHECKING P.C.B.S 6.1. Disassembly Procedure 6.2. Casing Parts and P.C.B. Positions DVD-K29GCS... -
Page 8: Top Panel
DVD-K29GCS 6.3. Top Panel 1. Unscrew the screws. 6.4. Front Panel 1. Release the tabs. 2. Release the tabs. 3. Remove the connectors. 6.5. Mic P.C.B. and Operation P.C.B. 1. Pull out the mic volume knob. 2. Unscrew the screws. -
Page 9: Module P.c.b
3. Press each tab with the nipper to module PCB vertically. 6.7. Mechanism Unit 1. Unscrew the screws. 2. Remove the connectors. 6.8. Rear Panel 1. Unscrew the screws. 2. Release the tabs. 6.9. Mother P.C.B. and Power SW P.C.B. 1. Unscrew the screws. DVD-K29GCS... -
Page 10: Service Position
DVD-K29GCS 6.10. Service Position 6.10.1. Servicing position of the Module P.C.B. 6.10.2. Servicing position of the Mother P.C.B. 6.10.3. List of the Extension Cables... -
Page 11: Assembling And Disassembling The Mechanism Unit
2. Slide the lever (A) further by bending the tab at the right side of the lever A in the right direction. (The right groove opens and the boss becomes seen.) 3. Open the lever (B) to left. (The 2 grooves at the left side open.) 4. Remove the traverse unit DVD-K29GCS... -
Page 12: Tray
DVD-K29GCS 7.3. Tray 1. Slide the guide tray unit while pressing the stopper in the arrow direction, and remove the guide tray unit. 2. Raise the loading unit. 3. Slide the lever in the arrow direction till it stops and pull the tray out. -
Page 13: Loading Section
4. Remove the belt. 5. Unlock the tab and remove the pulley. 6. Remove the relay gear. 7. Turn the change lever in the arrow direction till it stops. 8. Hook the change lever spring on the change lever project part temporarily. DVD-K29GCS... -
Page 14: Loading Motor P.c.b
DVD-K29GCS 9. Pull the lever (B) in the bottom side to your side and remove the change lever. 10. Remove the drive rack, the sub rack and the drive gear. 7.5. Loading motor P.C.B. 1. Unscrew the screws... -
Page 15: Optical Pickup Unit
3. The Intermediate FFC may be cut off if an excessive force is applied to it. Use caution when handling the Intermediate FFC. 4. The antistatic FPC is connected to the new optical pickup unit. After replacing the optical pickup unit and connecting the fIntermediate FFC, cut off the antistatic FPC. DVD-K29GCS... - Page 16 DVD-K29GCS 7.6.2. Procedure for Disassembling the Optical Pickup Unit 1. Move the optical pickup unit in the arrow direction till it stops. 2. Unscrew the screws. 3. Remove the drive rack. 4. Unscrew the screw 5. Slide the shaft in the arrow direction.
-
Page 17: Traverse Motor
3. Install the shaft top to the holder. 4. The intermediate FFC is fixed as shown below. 7.7. Traverse Motor 1. Unscrew the screws. 2. Remove the cover while lifting the inner gear. 3. Remove the solders. 4. Remove the traverse motor. DVD-K29GCS... - Page 18 DVD-K29GCS...
-
Page 19: Self-Diagnosis Function And Service Modes
"NO DISC" is displayed. As a guideline, you should replace the optical pickup when the value of the laser drive current is more than 55. Note: Press the power button to turn on the power, and check the value within three minutes before the unit warms up. (Otherwise, the result will be incorrect.) DVD-K29GCS... -
Page 20: Service Mode Table
DVD-K29GCS 8.2. Service Mode Table 1 The service modes can be activated by pressing various button combination on the player and remote control unit. Player buttons Remote control unit buttons PAUSE OPEN/CLOSE FUNCTION PAUSE PAUSE QUICK OSD OPEN/CLOSE 8.3. DVD Self Diagnostic Function-Error Code... -
Page 21: Last Error Code Saved During No Play
CPPM (*1) DISC EEPROM CPPM (IC8611) (*1) DISC EEPROM (IC8611) (IC8001) FROM (IC8651) (IC8001) EEPROM Serial (IC8611) communicat ion on lone FROM (IC8651) Setting task System computer internal error code 0xDOBF 0xDOC0 0xDOC1 0xDOC2 0xDOC3 0xDOC4 0xDOC5 DVD-K29GCS Defect 4... -
Page 22: Service Mode Table 2
DVD-K29GCS 8.5. Service mode table 2 Pressing various button combinations on the player and remote control unit can activate the service modes. - Page 23 DVD-K29GCS...
-
Page 24: Sales Demonstration Lock Function
DVD-K29GCS 8.6. Sales demonstration lock function This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function. "LOC" is displayed on the unit, and ordinary operation is disabled. 8.6.1. Setting The sales demonstration lock is set by simultaneously pressing STOP button on the player and POWER button on the remote control unit for 1 second or longer. -
Page 25: Service Precautions
6. Turn off the power. Note: If the AC power supply is shut out during version-up due to a power failure, the version-up is improperly carried out. In such a case, replace the FROM and carry out the version-up again. DVD-K29GCS... -
Page 26: Adjustment Procedures
DVD-K29GCS 10 ADJUSTMENT PROCEDURES 10.1. Service Tools and Equipment Application Tilt adjustment DVD test disc TORX screw driver (T6) Inspection Extension cable (module P.C.B. to mother P.C.B.) Extension cable (module P.C.B. to mother P.C.B.) Others Hanarl Grease Drysurf Confirmation CD test disc... -
Page 27: Optical Adjustment
Play test disc or any other disc to make sure there is no picture degradation in the inner, middle and outer peripheries, and no audio skipping. After adjustment is finished, lock each adjustment screw in position using screw lock. DVD-K29GCS Disc DVDT-S15 or DVDT-S01... - Page 28 DVD-K29GCS 10.4.1.4. Procedure for screw lock Please perform a screw lock in which by the side of the tip or head of an adjustment screw. <When a screw lock is performed to the tip part side of an adjustment screw>...
-
Page 29: Abbreviations
PLL CLOCK PDVD DVD TRACKING PHASE DIFFERENCE PEAK CAP. FOR PEAK HOLD PLLCLK CHANNEL PLL CLOCK PLLOK PLL LOCK PWMCTL PWM OUTPUT CONTROL PWMDA PULSE WAVE MOTOR DRIVE A PWMOA, B PULSE WAVE MOTOR OUT A, B DVD-K29GCS TORQUE CONTROL... - Page 30 DVD-K29GCS INITIAL/LOGO READ ENABLE RFENV RF ENVELOPE RF PHASE DIFFERENCE OUTPUT (CD-ROM) REGISTER SELECT RSEL RF POLARITY SELECT RESET RESERVE SBI0, 1 SERIAL DATA INPUT SBO0 SERIAL DATA OUTPUT SBT0, 1 SERIAL CLOCK SERIAL DATA CLOCK SCKR AUDIO SERIAL CLOCK RECEIVER...
-
Page 31: Voltage Chart
11.4 -10.3 11.9 11.8 11.8 IC1151 -4.4 -4.4 -8.0 -8.0 -7.9 -8.7 -9.2 -9.2 -9.2 -10.3 -10.2 -7.5 -10.4 -10.4 -9.2 -9.2 -9.2 -9.2 -9.3 Q1082 Q1126 Q4751 Q4924 -4.2 -3.7 Q4949 Q4950 QR4307 QR4308 -10.6 -10.4 DVD-K29GCS -8.0 -9.2... -
Page 32: Module P.c.b
DVD-K29GCS 12.2. MODULE P.C.B. Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. -
Page 33: Mic
Ref No. Q8562 MODE PLAY STOP Ref No. QR8111 MODE PLAY STOP 12.3. MIC P.C.B. IC4671 Ref No. MODE PLAY -10.3 STOP -10.1 IC8651 IC8651 IC8651 Q8551 Q8552 QR8431 11.8 12.0 Q8560 Q8561 QR8571 IC4691 -10.3 11.8 -10.1 12.0 DVD-K29GCS... - Page 34 DVD-K29GCS...
-
Page 35: Block Diagram
MODULE P.C.B. IC8001 IC8651 FRONT-END PROCESSOR/ OPTICAL DISC CONTROLLER/ DIGITAL SERVO CONTROLLER/ AV DECODER 16Mbit FLASH IC8611 16Kbit EEP ROM IC8051 64Mbit SDRAM DVD-K29GCS MIC P.C.B. IC4671, IC4691 IC8421 MIXL AUDIO CONVERTER MIXR DIGITAL AUDIO OUT (COAXIAL) IC3501 VIDEO OUT(LINE) VIDEO DRIVER MOTHER P.C.B. -
Page 36: Power Supply Block Diagram
DVD-K29GCS 13.2. POWER SUPPLY BLOCK DIAGRAM PRIMARY CIRCUIT L1001 D1011,C1011 T1021 AC SOCKET P1001 VA1002 SURGE LINE RECTIFIER KILLER FILTER POWER TRANSFORMER F1001 IC1021 CONSTANT VOLTAGE CONTROL Q1051 SECONDARY CIRCUIT IC6001 NSW+9V AUDIO NSW-12V OP AMPS Q1125 REG. D+1.2V Q1126... -
Page 37: Servo Block Diagram
LEVEL VO4- ACT T- SHIFT VO5+ ACT F+ VO5- ACT F- LEVEL SHIFT MUTE3 TRAY MUTE MUTE CLOSE SW TRAY CLOSE S2601 OPEN SW TRAY OPEN S2602 DVD-K29GCS SERVO BLOCK DIAGRAM DVD-K29GCS ACTUATOR TRACKING COIL FOCUS COIL IC6001 (OPERATION CPU) -
Page 38: Video Block Diagram
DVD-K29GCS 13.4. VIDEO BLOCK DIAGRAM OPTICAL PICK-UP UNIT IC8651 (16M FLASH ROM) ADDRESS DATA ADDRESS A18 16 DQ15 IC8001 (DV2) RFINN RFINP ADDRESS IC8051 (64M SDRAM) ADDRESS MEMORY ADDRESS 12bit NEXOE NEXWE NEXCE EXADT0 MEMORY DATA 16bit DQ10 DQ11 DATA... - Page 39 DVD-K29GCS VIDEO BLOCK DIAGRAM VIDEO MAIN SIGNAL IC3501 (VIDEO DRIVE) BIAS COUT DRIVER 6.75MHz CVBS -6dB DRIVER CLAMP YOUT DRIVER 6.75MHz BIAS MUTE 1.4V MUTE CLAMP CYIN CYOUT DRIVER 13.5MHz BIAS CBIN CBOUT DRIVER 6.75MHz BIAS CRIN CROUT DRIVER 6.75MHz IC3501-11 1.2Vp-p(20usec./div.)
-
Page 40: Audio Block Diagram
DVD-K29GCS 13.5. AUDIO BLOCK DIAGRAM IC8001 (DV2) DACCK SMUTE/CSM STBDAC ACKS/C CLK SBT3 DIF0/CDTI STO3 LRCK LRCK BICK SRCK SDTI ADOUT3 IC8001-171 5Vp-p(10usec./div.) Q4751 IECOUT IC8421-10,11 0.44Vp-p(0.5msec./div.) IC8421 MCLK (AUDIO D/A CONVERTER) DE-EMPHASIS CLOCK µP CONTROL DIVIDER AOUTL INTERFACE ∆Σ... -
Page 41: Interconnection Schematic Diagram & Schematic Diagram Notes
AUDIODIGITAL ADAC5V ADAC5V CR/PR/R CR/PR/R VGND VGND CB/PB/B CB/PB/B VGND VGND Y/PY/G Y/PY/G VGND VGND VGND VGND LOADING MOTOR P.C.B. DVD-K29GCS MIC P.C.B. FP6103 P4602 DGND DGND FP6154 P4601 MICDET MICDET MICOUT MICOUT ADGND ADGND OPERATION P.C.B. FP6102 FP6101 REMOCON REMOCON NSW+3.3V... -
Page 42: Schematic Diagram Notes
DVD-K29GCS 14.2. SCHEMATIC DIAGRAM NOTES This schematic diagram may be modified at any time with the development of new technology. Important safety notice: Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purpose of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. -
Page 43: Schematic Diagram
25V100 TP1109 IC1101 R1191 C0DAEMB00003 C1197 100K (SHUNT REG.) IC1195 C0DBFGC00008 (REG.NSW+3.3V) C1102 R1107 R1102 R1101 1200 C1196 DVD-K29GCS R1103 C1195 0.01 C1101 R1106 C1110 1000P 1200 POWER SUPPLY SECTION 0.68 1200 (MOTHER P.C.B.(1/2)) SCHEMATIC DIAGRAM DVD-K29GCS D+1.2V ADGND VGND... -
Page 44: Front & Av Out Section (Mother P.c.b. (2/2)) Schematic Diagram
DVD-K29GCS 15.2. FRONT & AV OUT SECTION (MOTHER P.C.B. (2/2)) SCHEMATIC DIAGRAM A+5V D+5V M+9V D+1.2V L3801 ADGND G0C680JA0019 AGND MGND C3825 6V1000 RESET FLH+ FLH- TO FP8102 MODULE P.C.B. FP3501 OP CPU-STAT OP CPU-CMD OP CPU-CLK TRAY MUT TRAY DRV... - Page 45 (MUTE) R4947 R4948 R4414 R4415 R4402 R4401 8.2K 8.2K R4950 1.2K R4940 R4951 Q4940 B1ABCF000138 (ATTENUATOR) DVD-K29GCS FRONT & AV OUT SECTION(MOTHER P.C.B.(2/2)) SCHEMATIC DIAGRAM R4417 Q4950 2SD0601ARL (SWITCHING) QR4308 UNR211100L (SWITCHING CTL.) R4404 QR4307 UNR221100L R4403 (SWITCHING) DVD-K29GCS R4949 10K...
- Page 46 DVD-K29GCS ZA4701 RMCC0001 ZA4751 K4CZ01000027 C4781 C4703 25V47 R4752 R4751 Q4751 B1ABCF000138 C4751 (AMP) 25V47 R4753 C4752 R4755 25V47 R4756 R4754 L3501 G0C220JA0019 C3505 C3518 6V47 C3509 1 C3506 0.01 C3508 1 POWER SW P.C.B. CL6026 PJ6101 KEY-SCAN1 DGND STBY LED...
-
Page 47: Module Schematic Diagram
1000P CL8234 C8111 IC8251 C0GBG0000054 (MOTOR DRIVE) IC8111 C0CBCBD00018 (REG.D+3.3V) C8113 TL8111 470P C8241 0.1 C8242 0.1 C8112 R8254 0 C8425 6V33 C8423 0.1 C8426 R8421 DVD-K29GCS MODULE SCHEMATIC DIAGRAM DVD-K29GCS QR8111 XP0621400L (SWITCHING) QR8571 B1GDCFEC0001 (SWITCHING) CL8571 D8571 MA2J72800L... - Page 48 P8(SDA) CL8027 VDD33 MMOD CL8024 CL8612 CL8611 R8021 C8011 R8022 RX8021 10KX2 CL8241 CL8243 C8031 CL8033 CL8032 CL8031 DVD-K29GCS MODULE SCHEMATIC DIAGRAM C8027 C8026 C8025 C8024 C8023 C8022 2200P IC8001 RFKVDS39BKIT (DV2) R8201 2200 C8217 C8012 C8013 C8203 C8204 C8218 C8207 0.1...
- Page 49 2 4 6 8 RX8015 RX8016 RX8017 RX8018 22X2 82X4 82X4 82X4 C8057 C8056 2200P C8051 C8052 C8651 C8652 DVD-K29GCS MODULE SCHEMATIC DIAGRAM VIDEO MAIN SIGNAL C8601 R8601 IC8601 RESET C0EBE0000384 (RESET) CL8034 IC8051 C3ABPG000133 (SD RAM) CL8561 C8055 CL8551 IC8651...
-
Page 50: Mic Schematic Diagram
DVD-K29GCS 15.4. MIC SCHEMATIC DIAGRAM J4671 K2HB102J0038 LB4673 J0JCC0000120 MIC 1 J4672 K2HB102J0038 LB4671 J0JCC0000120 MIC 2 LB4674 J0JCC0000120 R4677 C4681 R4680 R4557 50V1 220K 1.2K C4678 R4678 0.001 R4567 1.2K R4679 C4679 C4682 16V22 C4695 16V22 IN1+ IN1- IC4671... -
Page 51: Print Circuit Board
16 PRINT CIRCUIT BOARD 16.1. MOTHER P.C.B. MOTHER P.C.B. DVD-K29GCS LOADING MOTOR P.C.B. POWER SW P.C.B. DVD-K29GCS MOTHER P.C.B.(VEP76116C) POWER SW P.C.B.(VEP76117A) LOADING MOTOR P.C.B.(VEP70114A) -
Page 52: Mother P.c.b. & Module P.c.b. Address Information
DVD-K29GCS 16.2. MOTHER P.C.B. & MODULE P.C.B. ADDRESS INFORMATION MOTHER P.C.B. Transistors Test Point Q1045 CL6001 Q1051 CL6002 Q1081 CL6003 Q1082 CL6004 Q1115 CL6005 Q1125 CL6006 Q1126 CL6007 Q4302 CL6008 Q4422 CL6009 Q4423 CL6010 Q4751 CL6011 Q4924 CL6012 Q4940 CL6013... -
Page 53: Module P.c.b. (1/2) (Component Side)
16.3. MODULE P.C.B. (1/2) (COMPONENT SIDE) MODULE P.C.B. (1/2) (COMPONENT SIDE) DVD-K29GCS MODULE P.C.B. (1/2) (VEP73122N) DVD-K29GCS... -
Page 54: Module P.c.b. (2/2) (Foil Side)
DVD-K29GCS 16.4. MODULE P.C.B. (2/2) (FOIL SIDE) MODULE P.C.B. (2/2) (FOIL SIDE) DVD-K29GCS MODULE P.C.B. (2/2) (VEP73122N) -
Page 55: Operation P.c.b. & Mic P.c.b
16.5. OPERATION P.C.B. & MIC P.C.B. OPERATION P.C.B. Inntegrated Circuit IC4671 IC4691 ADDRESS INFORMATION MIC P.C.B. DVD-K29GCS OPERATION P.C.B. (REP70123A) DVD-K29GCS MIC P.C.B. Connectors P4601 P4602 DVD-K29GCS MIC P.C.B. (REP74103A) - Page 56 DVD-K29GCS...
-
Page 57: Exploded Views
DVD-K29GCS 17 EXPLODED VIEWS 17.1. CASING PARTS & MECHANISM SECTION EXPLODED VIEW... -
Page 58: Mechanism Section Exploded View
DVD-K29GCS 17.2. MECHANISM SECTION EXPLODED VIEW... -
Page 59: Packing & Accessories Section Exploded View
DVD-K29GCS 17.3. PACKING & ACCESSORIES SECTION EXPLODED VIEW... -
Page 60: Replacement Parts List
DVD-K29GCS 18 REPLACEMENT PARTS LIST Notes: *Important safety notice: Components identified characteristics important for safety. Furthermore, special parts which have purposes of fire- retardant (resistors), high-quality sound (capacitors), low- noise (resistors), etc. are used. When replacing any of components, be sure to use only manufacture’s specified parts shown in the parts list. - Page 61 C8303 F1G1C104A083 C8304 ECJ1VB0J105K C8307 F1G1C104A083 C8308 ECJ0EC1H150J C8311 F1G1C104A083 C8312 ECJ1VB0J105K C8421 F2G0J101A083 DVD-K29GCS Part Name & Remarks Description 50V 0.01U 50V 0.01U 16V 0.1U 6.3V 100U 4V 330U 50V 2200P 16V 0.1U F1G1C104A042 6.3V 1U 16V 0.1U F1G1C104A042 6.3V 1U...
- Page 62 DVD-K29GCS Ref. Part No. Part Name & Description C8422,2 F1G1C104A083 16V 0.1U C8425 F2G0J330A083 6.3V 33U C8426 F1G1C104A083 16V 0.1U C8501 ECJ3YB1A106K 10V 10U C8502- F1G1C104A083 16V 0.1U C8505 ECJ0EC1H221J 50V 220P C8506 ECJ0EC1H101J 50V 100P C8550 F2G0J330A031 6.3V 33U...
- Page 63 ERJ3GEYJ103V R4940 ERJ3GEYJ471 R4947,4 ERJ3GEYJ821 R4949 ERJ3GEYJ103V EROS2CKF1201 R4950 ERJ3GEYJ122 R4951 ERJ3GEYJ821 R6000 ERJ3GEY0R00 DVD-K29GCS Part Name & Remarks Description 1/10W 1.2K 1/10W 10K D0GB103JA002 1/10W 100K 1/10W 1K 1/10W 270 1/16W 3.6K 1/16W 1.3K 1/10W 120 1/10W 100K 1/10W 75...
- Page 64 DVD-K29GCS Ref. Part No. Part Name & Description R6002,0 ERJ3GEY0R00 1/10W 0 R6006 ERJ3GEYJ103V 1/10W 10K R6008 ERJ3GEYJ473V 1/10W 47K R6009 ERJ3GEYJ103V 1/10W 10K R6011 ERJ3GEYJ102V 1/10W 1K R6022 ERJ3GEY0R00 1/10W 0 R6023 ERJ3GEYJ103V 1/10W 10K R6024 ERJ3GEYJ272 1/10W 2.7K...