Pogo (10-Pin) Docking Connector Board - HP Pavilion x2 Detachable Maintenance And Service Manual
Hide thumbs
Also See for Pavilion x2 Detachable:
- Maintenance and service manual (88 pages) ,
- Product end-of-life disassembly instructions (5 pages)
Table of Contents
Advertisement
POGO (10-pin) docking connector board
Description
POGO (10-pin) docking connector board (includes cable)
POGO (10-pin) docking connector board for products equipped with a hard drive (includes cable)
Before removing the POGO-pin (10-pin) docking connector, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the back cover (see
a.
Battery (see
b.
Audio jack board (see
c.
Speakers (see
d.
Touch board (see
e.
System board (see
f.
Wireless antenna (see
g.
Power/volume button board (see
h.
Webcam module (see
i.
Middle frame (see
Remove the POGO (10-pin) docking connector board:
1.
Release the ZIF connector (1) that secures the POGO (10-pin) docking connector board to the display
panel assembly.
Back cover on page
Back cover on page
Battery on page
25)
Audio jack board on page
Speakers on page
27)
Touch board on page
System board on page
Wireless antenna on page
Power/volume button board on page
Webcam module on page
Middle frame on page
23).
23), and then remove the following components:
26)
29)
30)
33)
36)
38)
POGO (10-pin) docking connector board
Spare part number
814723-001
833623-001
833624-001
34)
39
Hide quick links:
Advertisement
Table of Contents
