Setting up
Adjusting adjustable feet
Install the projector on a flat surface so that the front of the projector is parallel to the screen surface and the
projection screen is rectangular.
If the screen is tilted downward, the projection screen can be adjusted to be rectangular by adjusting the
adjustable feet. The adjustable feet can also be used to adjust the projector to be level when it is tilted in a
horizontal direction.
Extend the adjustable feet by rotating in the direction shown in the figure and retract by rotating in the opposite
direction.
Attention
z Hot air is expelled from the air exhaust port. Do not touch the air exhaust port directly when adjusting the
adjustable feet. (
44 - ENGLISH
page 26)
Adjustable range
Front adjustable feet: 12 mm (15/32")
Rear adjustable feet: 12 mm (15/32")