Epson PowerLite S17 Installation Handbook
Hide thumbs
Also See for PowerLite S17:
- Quick setup (4 pages) ,
- User manual (209 pages) ,
- Operation manual (109 pages)
Advertisement
Quick Links
Epson PowerLite S17 / W17 / X17
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted to the ceiling, if necessary.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.
Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful
removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side
of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you
open the lamp cover.
4. Slide the lamp cover out and lift it off.
INSTALLATION HA NDBOOK
Maintenance
1
Advertisement
Related Manuals for Epson PowerLite S17
Summary of Contents for Epson PowerLite S17
- Page 1 INSTALLATION HA NDBOOK Epson PowerLite S17 / W17 / X17 Maintenance Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury.
- Page 2 INSTALLATION HA NDBOOK Epson PowerLite S17 / W17 / X17 Maintenance 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 6. Grasp the raised section of the lamp and gently pull the lamp out of the projector.
- Page 3 INSTALLATION HA NDBOOK Epson PowerLite S17 / W17 / X17 Maintenance 7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.
- Page 4 INSTALLATION HA NDBOOK Epson PowerLite S17 / W17 / X17 Maintenance 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage.