Samsung 650 User Manual page 115
Series 6
Hide thumbs
Also See for 650:
- User manual (230 pages) ,
- Quick setup manual (117 pages) ,
- Quick start manual (7 pages)
Table of Contents
Advertisement
T oubles oot-ng
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Poor picture quality.
Poor sound quality.
No picture or sound.
No sound or sound is too low at
maximum volume.
Picture rolls vertically.
The TV operates erratically.
The TV won't turn on.
Remote control malfunctions
Digital broadcasting screen problem.
The image is too light or too dark.
The image is too large or too small.
The visual qualities of digital
channels vary.
Screen is black and power indicator
light blinks steadily.
Although the TV caption shows HO,
the visual quality is not satisfactory.
A distorted picture appears in the
corner of the screen.
Small brightness variations are
observed in localized areas of
screen.
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
__________ _____ __ _ __ _ _ __ __ __ __ __ _
_
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
First, check the volume of units connected to your TV (digital broadcasting receiver,
OVO, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Check all connections.
Unplug the TV for 30 seconds, then try operating it again.
_ ___ _____ __ __ _
Make sure the wall outlet is working.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Press the TV button to put your remote control in the TV mode.
Make sure the remote has batteries.
Check that the "+" and"-" ends of the batteries are inserted correctly.
•
Please check the digital signal strength and input antenna.
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Adjust the Size settings.
The visual qualities of digital channels may vary depending on the original production
method (analog or digital).
- If the original production method is digital: High visual quality.
I
-
If the original production method is analog: The digital program displayed on the
I
screen is originally an analog program which has been converted to digital.
The visual quality is of an SO(Standard Definition) grade.
_
On your computer; check the Power and Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
On your equipment check (STB, OVO, etc) ; Power and Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The HO(High Definition) caption that appears when switching channels or when
pressing the Information button on the remote control means the selected channel is
a digital channel. If the broadcasting station converts an analog signal into digital and
transmits the signal, the visual quality may not be perfect.
If Just Scan is selected in some external devices, a distorted picture may appear in
the corner of the screen. This symptom is caused by external devices, not the TV.
Some users might observe small brightness variations in localized areas when very
bright or dark signals are applied. These are normal production variations and do not
diminish the TVs viewing experience.
• The display panel used for the OLP TV is composed of many tiny pixels.
These pixels may occasionally appear on the screen.
Engli~h
-11
Advertisement
Table of Contents
Troubleshooting
