Table of Contents
Advertisement
Error information page
When [Error (Detail)] appears in the self-diagnosis display of the [Projector status] screen, click it to display the
error details.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1
Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[FAILED]:
Indicates that there is a problem.
r [FAILED] items
Item
[MAIN CPU BUS]
[FAN]
[INTAKE AIR TEMPERATURE]
[OPTICS MODULE TEMPERATURE]
[LD MODULE TEMPERATURE]
[LOW-TEMPERATURE]
[LD STATUS]
[INTAKE AIR TEMP.SENSOR]
[OPTICS MODULE TEMP.SENSOR]
[LD MODULE TEMP.SENSOR]
[BATTERY]
[PHOSPHOR WHEEL]
[COLOR WHEEL]
[COVER OPEN]
Chapter 5 Operations — Web control function
There is a problem with the microcomputer circuitry. Consult your dealer.
There is a problem with the internal cooling fan or the fan drive circuit. Consult your
dealer.
The intake air temperature is too high. The projector may be used in an environment
where the temperature is high, such as near a heating appliance.
The temperature around the optics module inside the projector is high. The projector
may be used in an environment where the temperature is high, such as near a heating
appliance.
The temperature of the light source is high. The projector is possibly used in an
environment where the temperature is high, such as near a heating appliance.
The internal temperature of the projector or ambient temperature is low. Projection
cannot be started until the internal temperature of the projector or ambient temperature
becomes warm.
The light source failed to turn on or off. Wait for a while until the light source cools off,
and then turn on the power.
There is a problem with the intake temperature detection sensor. Consult your dealer.
There is a problem with the temperature detection sensor around the optics module
inside the projector. Consult your dealer.
There is a problem with the temperature sensor of the light source. Consult your dealer.
Replacement of built-in battery is required. Consult your dealer.
There is a problem with the phosphor wheel or phosphor wheel drive circuit. Consult
your dealer.
There is a problem with the color wheel or color wheel drive circuit. Consult your dealer.
There is a problem with attachment of the outer case. Consult your dealer.
1
Description
ENGLISH - 107
Advertisement
Table of Contents
