Page 1 OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
Page 2: Separate Purchase
(60PK7 *** , 60PK9 *** ) Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG Plasma TV. Wireless LAN for Broadband/ Wireless Media Box...
Page 3: Table Of Contents
CONTENTS PREPARATION Product/Service Information ......39 Network Test ............39 Simple Manual ..........40 Accessories ............. A-1 Selecting the Programme List ......41 Front Panel Controls ........A-2 Input List ............43 Back Panel Information ........A-3 Input Label ............44 Stand Installation ..........A-4 SIMPLINK ............45 Back Cover for Wire Arrangement ....
Page 4 CONTENTS MHEG (MULTIMEDIA AND TIME SETTING HYPERMEDIA INFORMATION CODING EXPERT GROUP)(IN DIGITAL MODE) Clock Setup .............129 Auto On/Off Time Setting ........130 Switch on MHEG ..........97 Sleep Timer Setting .........131 Select a Programme .........97 PARENTAL CONTROL / RATINGS Button Function in Listing Mode .......98 Button Function in NOW/NEXT Mode ....98 Set Password &...
Page 5: Preparation
PREPARATION PLASMA TV Models : 50/60PK7 *** , 50/60PK9 *** ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. ■ Image shown may differ from your TV. LIGHT ENERGY AV MODE...
Page 6: Front Panel Controls
PREPARATION FRONT PANEL CONTROLS NOTE ►TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
Page 7: Back Panel Information
BACK PANEL INFORMATION ■ Image shown may differ from your TV. OPTICAL AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT RS-232C IN WIRELESS (CONTROL & SERVICE) RGB IN (PC) CONTROL VIDEO L(MONO) AUDIO ANTENNA /DVI IN VIDEO AUDIO Power Cord Socket Audio/Video Input This TV operates on an AC power.
Page 8: Stand Installation
PREPARATION STAND INSTALLATION (only 50PK7***, 50PK9***) ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
Page 9: Back Cover For Wire Arrangement
BACK COVER FOR HOW TO REMOVE THE WIRE ARRANGEMENT CABLE MANAGEMENT CLIP ■ Image shown may differ from your TV. ■ Image shown may differ from your TV. After connecting the cables as necessary, install Cable Holder as shown and bun- Hold the Cable Management Clip with both dle the cables.
Page 10: Not Using The Desk-Type Stand
PREPARATION NOT USING THE DESK- CAREFUL INSTALLATION TYPE STAND ADVICE ■ You should purchase necessary components ■ Image shown may differ from your TV. to fix the TV safety and secure to the wall on When installing the wall-mounted unit, use the the market.
Page 11: Desktop Pedestal Installation
Model Screw Quantity (A * B) 50PK7 *** 400 * 400 ■ We recommend the use of a LG Brand wall 60PK7 *** 600 * 400 mounting bracket when mounting the TV to a wall. 50PK9 *** 400 * 400 ■...
Page 12: Remote Control Key Functions
PREPARATION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. Switches the TV on from standby or off to standby. (POWER) LIGHT You can turn the light of the remote control button ENERGY AV MODE INPUT...
Page 13 ENERGY AV MODE INPUT LIGHT ENERGY AV MODE INPUT SAVING 0 to 9 number Selects a programme. button Selects numbered items in a menu. (Space) Opens an empty space on the screen keyboard. LIST Displays the programme table. (► p.41) PQRS Q.VIEW Returns to the previously viewed programme.
Page 14 PREPARATION VOLUME UP Adjusts the volume. /DOWN ENERGY AV MODE INPUT MARK Select the input to apply the Picture Wizard LIGHT settings. Mark and un-mark programmes in the USB menu. ENERGY AV MODE INPUT Displays the selected favourite programme. SAVING Shifts the Character or Number for NetCast menu.
Page 15: External Equipment Setup
EXTERNAL EQUIPMENT SETUP ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket)
Page 16: Connecting With A Component Cable
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 50/60 PK950. ■ Image shown may differ from your TV. CONNECTING WITH A COMPONENT CABLE This TV can receive Digital RF/Cable signals without an external digital set-top box.
Page 17: Connecting With An Hdmi Cable
CONNECTING WITH AN HDMI CABLE AUDIO IN (RGB/DVI) Connect the HDMI output of the external equipment (digital set- WIRELESS RGB IN (PC) CONTROL top box, DVD, etc.) to HDMI/DVI IN 1, HDMI/DVI IN 2, HDMI/ DVI IN 3, HDMI/DVI IN 4 jack on the TV. Turn on the external equipment.
Page 18: Connecting With An Hdmi To Dvi Cable
EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI TO DVI CABLE Connect the digital set-top box or the DVI out- OPTICAL AUDIO IN DIGITAL put of the PC to HDMI/DVI IN 1, HDMI/DVI IN (RGB/DVI) AUDIO OUT RS-232C IN WIRELESS RGB IN (PC) (CONTROL &...
Page 19: Connecting With An Rf Cable
CONNECTING WITH AN RF CABLE To avoid picture noise (interference), allow adequate distance between the VCR and TV. Connect the ANT OUT socket of the VCR to AUDIO R R R R R the ANTENNA IN socket on the TV. ANTENNA Connect the antenna cable to the ANT IN socket of the VCR.
Page 20: Connecting With A D-Sub 15 Pin Cable
EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's set- tings. OPTICAL AUDIO IN DIGITAL Connect the RGB output of the PC to the RGB (RGB/DVI) AUDIO OUT RS-232C IN...
Page 21: External Equipment Wireless Connection
LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately. When you connect the Wireless Ready Dongle (included with the Wireless Media Box) to the TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly.
Page 22: Supported Display Resolution
EXTERNAL EQUIPMENT SETUP SUPPORTED DISPLAY RESOLUTION RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode Horizontal Horizontal Vertical Vertical Resolution Frequency Resolution Frequency Frequency (Hz) Frequency (Hz) (kHz) (kHz) 720x400 31.469 70.08 31.47 59.94 720x480 640x480 31.469 59.94 31.47 800x600 35.156 56.25 720x576 31.25 800x600 37.879 60.31...
Page 23: Screen Setup For Pc Mode
SCREEN SETUP FOR PC MODE Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. SCREEN PICTURE Move Prev. Move Resolution • Brightness • Sharpness Auto Config. • Colour •...
Page 24 EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
Page 25 Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] SCREEN Move Prev. PICTURE Move 1024 x 768 Resolution • Brightness 1280 x 768 •...
Page 26: Adjustment For Screen Position, Size, Phase
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually. This function works in the following mode : RGB[PC]. SCREEN Prev.
Page 27: Network Setup
NETWORK SETUP Wired Network Connection This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication. OPTICAL AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT RS-232C IN WIRELESS...
Page 28: Wired Network Setup
EXTERNAL EQUIPMENT SETUP Wired Network Setup If wired and wireless networks are both available, wired is the preferred method. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For detail information, contact your internet provider or router manual. If you already set the Network Setting NETWORK...
Page 29 ■ This feature requires an always-on broadband internet connection. ■ You do not need to connect to a PC to use this function. ■ If Network Setting is not working, check your network conditions. Check the LAN cable and make sure your router has DHCP turned on if you wish to use the Auto Setting. ■...
Page 30 ► Turn off all unused network equipment in your service. For details, contact your ISP. local home network. Some devices may gener- ► LG is not responsible for any malfunction of the ate network traffic. TV and/or the internet connection feature due to ►...
Page 31: Wireless Network Connection
Wireless Network Connection The LG Wireless LAN for Broadband/DLNA Adaptor, allows the TV to connect to a wireless lan network. The network configuration and connection method may vary depending on the equipment in use and the network environment. Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.
Page 32: Wireless Network Setup
EXTERNAL EQUIPMENT SETUP Wireless Network Setup Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. If you already set the Network Setting NETWORK Move Select the wireless network setting type. •...
Page 33 When a security code is already set PIN (Personal Identification Number) If you want to connect the AP (Access Point) or router with PIN, use this feature. Selecting AP Connecting with PIN mode Select AP you want to connect. Page 1/1 Insert PIN number at the AP webpage and press ‘Connect’...
Page 34 EXTERNAL EQUIPMENT SETUP Simple setting (WPS-button mode) If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it’s available to use your access point or wireless router within 120 counts. You do not need to know the access point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
Page 35: Your Tv Screen
Ad-hoc Mode This is the method of communicating directly with the machine to communicate without AP. This is the same as connecting two PCs with a cross cable. Select the wireless network setting type. Setting Ad-hoc network Setting Ad-hoc network Select the wireless network setting type.
Page 36: Network Status
EXTERNAL EQUIPMENT SETUP Network Status Network Status NETWORK Move • Network Setting : Wired • Network Status : Not connected • Network Status : Internet is connected Network connecting • Legal Notice Setting Test Close Select the wireless network setting type. Network Setting Select the wireless network setting type.
Page 37: Watching Tv / Programme Control
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the / I, INPUT or P button on the TV or press the POWER, INPUT, P...
Page 38: Quick Menu
WATCHING TV / PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture for- Audio Language : Selects the sound output.
Page 39: On Screen Menus Selection And Adjustment
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. • Press the RED button, you can check the Display each menu. Customer Support menu. • Press the GREEN button, you can check the Simple Manual menu.
Page 40 WATCHING TV / PROGRAMME CONTROL ■ Image shown may differ from your TV. Input List NETWORK Move Move • Network Setting : Wired NETWORK • Network Status : Internet is connected INPUT Antenna USB1 USB2 Component1 • Legal Notice Component2 HDMI1 HDMI2 HDMI3...
Page 41: Auto Programme Tuning
AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 200. But the number may differ slightly depending on broadcasting signals.
Page 42: Manual Programme Tuning
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. SETUP SETUP Move Move ◄ ► Auto Tuning Auto Tuning ● ● UHF CH. Manual Tuning Manual Tuning Manual Tuning Manual Tuning ●...
Page 43 MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. SETUP SETUP Move Move Auto Tuning Auto Tuning ● ● ◄ ► Manual Tuning Manual Tuning Manual Tuning Manual Tuning ●...
Page 44: Assigning A Station Name
WATCHING TV / PROGRAMME CONTROL SETUP SETUP Move Move Auto Tuning Auto Tuning ● ● ◄ ► Manual Tuning Manual Tuning Manual Tuning Manual Tuning ● ● ● ● ● Storage Programme Edit Programme Edit ● ● ● System ● Band V/UHF ●...
Page 45: Programme Edit
PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu.
Page 46 WATCHING TV / PROGRAMME CONTROL IN DTV/RADIO MODE ■ Skipping a programme number • When programmes are to be skipped, the skipped programme shows in blue and Select a programme number to be skipped. these programmes will not be selected by the P buttons during TV viewing.
Page 47 ■ Skipping a programme number • When a programme number is skipped it means that you will be unable to select it Select a programme number to be skipped. using the P button during normal TV viewing. • If you wish to select a skipped programme, BLUE Turn the programme number to blue.
Page 48 WATCHING TV / PROGRAMME CONTROL ■ Selecting favourite programme group Select your desired programme. Display a pop-up window where Favourite group can be changed. Select a Favourite group.
Page 49: Software Update
You can update the software by connecting the TV directly to the software update server. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your TV. Software Update ◄...
Page 50 WATCHING TV / PROGRAMME CONTROL ■ When setting “Software Update” Occasionally, a transmission of Download starts when "Yes" is TV is restarted when down- updated digital software infor- selected. At this time, pro- load is completed. mation will result in the following gressing pop-up window does menu on the TV screen.
Page 51: Picture/Sound Test
PICTURE/SOUND TEST This function is a customer support function that can execute picture and sound tests. Software Update Do you have a problem in this test Picture Test Picture Test SETUP PICTURE AUDIO TIME LOCK screen? Sound Test Signal Test Product/Service Info.
Page 52: Diagnostics
This displays the signal information and service name of the selected MUX. (*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple chan- nels.)) Engineering Diagnostics Manufacturer : LG Electronics Inc. Software Update Model/Type : 50PK950-AA Software Version : V01.03.00...
Page 53: Product/Service Information
PRODUCT/SERVICE INFORMATION This function is a customer support function that can see product/service information and customer service center information. Software Update Picture Test Sound Test SETUP PICTURE AUDIO TIME LOCK Signal Test Product/Service Info. Product/Service Info. Network Test NETWORK INPUT MY MEDIA GAME OPTION...
Page 54: Simple Manual
WATCHING TV / PROGRAMME CONTROL SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. ■ Image shown may differ from your TV. SETUP PICTURE AUDIO...
Page 55: Selecting The Programme List
SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. Exit Mini Glossary Programme List ▼ Page 1/3 Displayed when the 1 ABC TV Sydney Locked Programme. 7 7 Digital 9 Nine Digital 10 ABC2 11 ABC TV 12 ABC HDTV...
Page 56 WATCHING TV / PROGRAMME CONTROL ■ Paging through a programme list Return to normal TV viewing. Turn the pages. list ■ Displaying the favourite programme Favourite List Exit ◄ ►Favourite Pr. Group ◄ Group ► 1 ABC TV Sydney 12 ABC HDTV 70 7 HD Digital 90 Nine Digital HD Pr.Edit...
Page 57: Input List
INPUT LIST HDMI and AV can be recognized by a detect pin and thus enabled only when an external device approves voltage. By using TV/RAD button, you can move from External Input to RF Input and to the last watched pro- gramme in DTV/RADIO/TV mode.
Page 58: Input Label
WATCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source. ■ Image shown may differ from your TV. Input Label Input List Move ◄ ► ◄ ► Antenna USB1 USB2 Component1 Component1 ◄ ► Component2 HDMI1 HDMI2 HDMI3 HDMI4...
Page 59: Simplink
SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
Page 60 WATCHING TV / PROGRAMME CONTROL Connecting to Home Theater with the SIMPLINK logo. Connect the HDMI/DVI IN 1, HDMI/DVI IN 2, OPTICAL AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT RS-232C IN HDMI/DVI IN 3, HDMI/DVI IN 4 terminal on the RELESS (CONTROL &...
Page 61: Simplink Functions
SIMPLINK Functions Disc playback Control connected AV devices by pressing the , OK, ►, ▀ , l l, ◄◄ and ►► buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional set- tings.
Page 62: Av Mode
WATCHING TV / PROGRAMME CONTROL AV MODE You can select the optimal images and sounds when connecting AV devices to external input. Disables the AV MODE. Optimizes video and audio for watching movies. ꔧCinema Sport Optimizes video and audio for watching sports events. Game Optimizes video and audio for playing games.
Page 63: Initializing(Reset To Original Factory Settings)
INITIALIZING(RESET TO ORIGINAL FACTORY SETTINGS) This function initializes all settings. But the settings of Day and Night of the Picture Mode cannot be initialized. It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup.
Page 64: Netcast
EXPRESSLY ACKNOWLEDGE AND AGREE THAT THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. LG ELECTRONICS EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO ANY CONTENT AND SERVICES, EITHER...
Page 65 Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time, without notice, and LG makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which LG has no control.
Page 66: Netcast Menu
► To view the owner’s manual that provided by the Content Provider, visit our website at http://www.lg.com. ► For service that requires log in, join the applicable service on the website using the PC and log in through the TV to enjoy various additional functionalities.
Page 67: Bigpond
Bigpond (Only Australia) About BigPond Movies on NetCast BigPond Movies is a service that allows you to watch video content on your TV using your Internet connection. Access Hollywood blockbusters, award-winning Australian films and a great selection of TV shows from BigPond Movies – without leaving your living room! Getting started Press the [NetCast] button on your remote control.
Page 68 NETCAST Choose from the following options on the BigPond Movies menu: ● Movies: View movies by category ● Television: View TV shows by category ● Sign in or join now: Create a BigPond Movies account for the first time or sign in to an existing account ●...
Page 69 For additional questions relating to your BigPond Movies service, please visit www.bigpond.com/lgtv. Minimum Internet Requirements: The LG BigPond Movies service requires a minimum data speed of 3.5MBps (ADSL 2, ADSL 2+, cable or FTTx) to function correctly. Please contact your Internet Service Provider or BigPond to upgrade or migrate your service.
Page 70: Movie Online
NETCAST MOVIE ONLINE Movie Online is a video sharing website where users can upload, view, and share video clips. Movie Online Screen Components Movie Online menu Videos list Set the option menu. Return to NetCast menu. Return to TV viewing. NOTE ►...
Page 71: Using The Remote Control
Movie Online Service menu ● Home: You can watch the popular video in real time. ● Featured: The featured videos list will be displayed. ● Popular: The best rated videos list from Movie Online server will be displayed. ● Most Viewed: The most viewed videos list will be displayed. ●...
Page 72: Weather Info
►By default, New York, London and Paris are registered and the user can add/delete cities from Favorite City. ►LG is not responsible for the accuracy of the weather forecast. ►Applicable weather information can differ from the actual weather depending on the information...
Page 73: Photo Album
PHOTO ALBUM Photo Album is an application that appreciates digital image files. Photo Album Screen Components Photo Album menu Photos list Corresponding buttons on the remote control Select the desired photo. The selected photo file is displayed. Return to NetCast menu. Return to TV viewing.
Page 74: To Use A Usb Or Pc Device
TO USE A USB OR PC DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically. “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activat- When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu.
Page 75 Precautions when using the USB device ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programme may not be recognized. ►...
Page 76: Dlna
TO USE A USB OR PC DEVICE DLNA About DLNA This TV is a DLNA Certified digital media product. It can display and play a movie, photo and music content from your DLNA server. The Digital Living Network Alliance (DLNA) is a cross-industry organ- ization of consumer electronics, computing industry and mobile device companies.
Page 77 Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows. Requirement PC system before you install Nero MediaHome 4 Essentials ■ Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows®...
Page 78 TO USE A USB OR PC DEVICE Sharing files and folders After installing Nero MediaHome, you must add folders you wish to share. Double-click the Nero MediaHome 4 Essentials icon on the desktop. Click Network icon on the left and define your network name in the Network name field. The Network name you enter will be recognized by your TV.
Page 79 Playing back shared contents You can display and play movie, photo and music content stored on your computer or other DLNA media servers. Start the server on your computer or other device that connected on your home network. Select MY MEDIA. Select Movie List, Photo List or Music List.
Page 80: Movie List
TO USE A USB OR PC DEVICE MOVIE LIST You can play movie files on a USB or PC storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files.
Page 81 Supported DivX file File Extensions Codec Profile/Level Support Explanation Advanced Profile@Level 3 VC-1 Advanced Profile Only streams compliant (e.g. 720p60, 1080i60, 1080p30) to SMPTE 421M VC-1 Video Simple Profile@Medium Level (e.g. CIF, QVGA) VC-1 Simple and Main standard are supported. .asf Profiles Main Profile@High Level (e.g.
Page 82: Screen Components
TO USE A USB OR PC DEVICE Screen Components You can also adjust USB in the INPUT menu. Select Movie List. Select MY MEDIA. Moves to upper level folder Page 1/1 Movie List Current page/Total pages Corresponding buttons on the Drive1 Page 1/1 USB1 External...
Page 83 Movie Selection ■ When playing movie files Page 1/1 Movie List Drive1 Page 1/1 USB1 External M002 02:30:25 Move Play Page Change Mark MARK Change Device To Photo List Exit Change Numbers Mark Mode Use the P button to navigation in the •...
Page 84 TO USE A USB OR PC DEVICE ■ When selected movie files are played Page 1/1 Movie List Mark Mode Drive1 Page 1/1 USB1 External M002 02:30:25 Move Mark Page Change Mark MARK Play Marked Exit Mark All Unmark All Exit Mark Mode When one or more movie files are •...
Page 85 Using the remote control Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically. GREEN Mark all movie files on the screen. YELLOW Deselect all marked movie files. BLUE Exit the Mark Mode. Return to normal TV viewing.
Page 86 TO USE A USB OR PC DEVICE Using the Movie List function, play Choose options. Set Video Play. Set Video. Set Audio. Close ◄► ► 01:02:30 / 02:30:25 ■ ► ◄◄ ►► Option Hide Exit Q.MENU Show the Option menu. Select Set Video Play., Set Video.
Page 87 Using the remote control ■ Stop the playing movie file. Press the PLAY ( ► ) button to return to normal playback. ► During playback, press the Pause ( II ) button. ■ Still screen is displayed. ■ If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state.
Page 88 TO USE A USB OR PC DEVICE ■ When you select the Set Video Play, Set Video Play. Picture Size Full ◄ ► Audio Language ◄ ► Subtitle ◄ ► ● Language English ◄ ► ● Code page Default ◄ ►...
Page 89 ■ When you select the Set Video, ■ Image shown may differ from your TV. Set Video. Picture Mode Standard ◄ ► ● Contrast ◄ ● Brightness ◄ ► ● Sharpness ◄ ► ● Colour ◄ ► ● Tint ● Colour Temp. ●...
Page 90: Photo List
TO USE A USB OR PC DEVICE PHOTO LIST You can view photo files on USB or PC storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode.
Page 91 Photo Selection ■ When playing photo files Page 1/1 Photo List Drive1 Page 1/1 USB1 External Move View Page Change Mark MARK Change Device To Music List Change Numbers Mark Mode Exit Use the P button to navigation in the •...
Page 92 TO USE A USB OR PC DEVICE ■ When selected photo files are displayed Page 1/1 Photo List Mark Mode Drive1 Page 1/1 USB1 External Move Mark Page Change Mark MARK View Marked Exit Mark All Unmark All Exit Mark Mode When one or more photos are marked, you •...
Page 93 How to view photo Detailed operations are available on full-sized photo view screen. Page 1/1 Photo List USB1 External Drive1 Page 1/1 Move View Page Change MARK Mark Change Device To Music List Change Numbers Mark Mode Exit 01_a.jpg 2008/12/10 1920 x 1080 479 KB ◄...
Page 94 TO USE A USB OR PC DEVICE Select the 01_a.jpg 2008/12/10 Slideshow, 1920 x 1080 479 KB BGM, (Rotate), � ◄ ► Option, Hide or Exit. button to select the previous • ◄ 2/13 ► or next photo. Hide Slideshow Option Exit Q.MENU...
Page 95 Using the Photo List function Choose options. Set Photo View. ◄ ► Set Video. Set Audio. Close ◄ ► 2/13 Slideshow Option Hide Exit Q.MENU ► ■ Show the Option menu. Select Set Photo View., Set Video. or Set Audio.. NOTE ►...
Page 96 TO USE A USB OR PC DEVICE ■ When you select the Set Photo View, Set Photo View. Slide Speed Fast ◄ ► Drive1 ● Repeat ◄ ► ● Random ◄ ► Previous Select Slide Speed or BGM. Make appropriate adjustments. ■...
Page 97 ■ When you select the Set Audio, Set Audio. Sound Mode Standard ◄ ► Auto Volume ◄ ► Clear Voice II ◄ ► Balance ◄ ► Previous Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p.
Page 98: Music List
TO USE A USB OR PC DEVICE MUSIC LIST You can play music files on USB or PC storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your TV.
Page 99 Music Selection Page 1/1 Music List Drive1 USB1 External Page 1/1 001. - S001 002. -S002 003. S003 004. - S004 03:43 04:45 01:30 02:37 005. - S005 01:58 Move Play Page Change Mark MARK Change Device To Movie List Change Numbers Mark Mode Exit...
Page 100 TO USE A USB OR PC DEVICE ■ When selected music files are played Page 1/1 Music List Mark Mode USB1 External Drive1 Page 1/1 001. - S001 002. -S002 003. S003 004. - S004 03:43 04:45 01:30 02:37 005. - S005 01:58 Move Mark...
Page 101 Using the Music List function, play Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 USB1 External Choose options. Set Audio Play. ► Set Audio. 001. - S001 002. -S002 003. S003 004. - S004 005. - S005 03:43 04:45 01:30 02:37...
Page 102 TO USE A USB OR PC DEVICE Using the remote control ■ Stop the playing music file. Press the PLAY ( ► ) button to return to normal playback. ► When you press the Pause ( II ) button while playing the file, the playback will be paused.
Page 103 ■ When you select the Set Audio, Set Audio. Sound Mode Standard ◄ ► Auto Volume ◄ ► Clear Voice II ◄ ► Balance ◄ ► Previous Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. (Refer to p.
Page 104: Divx Registration Code
TO USE A USB OR PC DEVICE DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) MY MEDIA You must register your device to...
Page 105: Deactivation
DEACTIVATION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web-server and are blocked from activating more devices. DivX VOD allowed the consumer to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had to contact DivX Support and request deletion.
Page 106: Game
GAME GAME Allows you to enjoy the games installed on the TV. Game SETUP PICTURE AUDIO TIME LOCK JUMP HOLE IN ONE WHACK A MOLE SUDOKU COOKING BURGER NETWORK INPUT MY MEDIA OPTION GAME SAVING CRYSTAL INVADER URGENT SURVIVAL Exit Press OK( ) to set programme settings.
Page 107: Epg(Electronic Programme Guide)(In Digital Mode)
EPG(ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) (Except New Zealand) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
Page 108: Switch On/Off Epg
EPG (ELECTRONIC PROGRAMME GUIDE) SWITCH ON/OFF EPG Switch on or off EPG. SELECT A PROGRAMME Select desired programme. BUTTON FUNCTION IN NOW/NEXT GUIDE MODE You can view a programme being broadcasted and one scheduled to follow. Programme Guide Change EPG mode. ▲...
Page 109: Button Function In 8 Day Guide Mode
BUTTON FUNCTION IN 8 DAY GUIDE MODE Programme Guide Change EPG mode. ▲ The Wiggles Show 22 Dec. 2006 10:15 DTV 1 ABC TV Sydney 22 Dec. 2006 10:03 ~ 10:15 Fri. 22 Dec. 10:00 11:00 Enter Date setting mode. GREEN Th...
Page 110: Button Function In Remind Setting Mode
EPG (ELECTRONIC PROGRAMME GUIDE) BUTTON FUNCTION IN REMIND SETTING MODE Sets only a start time for the reminder. Switch off Manual Timer mode. Manual Timer Select the date to schedule. Wed. 12 Aug. 2009 13:46 YELLOW Change to Guide mode. Sun.
Page 111: Mheg
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION CODING EXPERT GROUP) (IN DIGITAL MODE) (Only New Zealand) This feature is enabled only in New Zealand. - In New Zealand, pressing the Guide key will display MHEG EPG provided by New Zealand on the screen. This system has an MHEG(Multimedia and hypermedia information coding expert group) to help your navi- gation through all the possible viewing options.
Page 112: Button Function In Listing Mode
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION CODING EXPERT GROUP)(IN DIGITAL MODE) BUTTON FUNCTION IN LISTING MODE Select the Broadcast Programme Information. Select Channel. Change to Next Week or Prev Day. YELLOW Change to Next Day or Today. BLUE Next Week EPG/Guide The MHEG will disappear after moving to a selected channel.
Page 113: Picture Control
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema Zoom. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
Page 114 PICTURE CONTROL • 4:3 • Zoom The following selection will allow you to view a picture The following selection will allow you to view with an original 4:3 aspect ratio, gray bars will appear the picture without any alteration, while filling on both the left and right of the screen.
Page 115: Picture Wizard
PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example.
Page 116: Energy Saving
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode.
Page 117: Preset Picture Settings
PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Optimizes power consumption. Optimizes video for watching movies. ꔧCinema ꔧBright Room This is the specification to optimize TV viewing in Bright Room. Sport Optimizes video for watching sports events.
Page 118 PICTURE CONTROL Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the • Picture Mode menu based on the programme category. • When the Intelligent sensor function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
Page 119: Manual Picture Adjustment
MANUAL PICTURE ADJUSTMENT Picture Mode-User option Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture.
Page 120: Picture Improvement Technology
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset”...
Page 121: Expert Picture Control
EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos. Image shown may differ from your TV.
Page 122 PICTURE CONTROL *This feature is not available for all models. ■ Adjusts the contrast to keep it at the best level according to the bright- Dynamic Contrast ness of the screen. The picture is improved by making bright parts bright- (Off/Low/High) er and dark parts darker.
Page 123 Colour Filter ■ This is the function to filter the specific colours of the video. You can use the RGB filter to set colour saturation and hue accurately. (Off/Red/Green/Blue) This is the function to adjust the overall colour of the screen to the feeling you want. Method : 2 Points a.
Page 124: Picture Reset
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE PICTURE Move Move • Brightness • Brightness • Sharpness • Sharpness • Colour • Colour All picture settings will be reset. • Tint •...
Page 125: Image Sticking Minimization (Ism) Method
IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods.
Page 126: Mode Setting
PICTURE CONTROL MODE SETTING We recommend setting the TV to “Home Use ” mode for the best picture in your home environment. “Store Demo ” mode is an optimal setting for displaying at stores. OPTION OPTION Move Move Language(Language) Language(Language) ●...
Page 127: Demo Mode
DEMO MODE It is not possible to use Demo Mode in Home Use mode. In Store Demo, Demo Mode is automatically set to On. Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset.
Page 128: Sound & Language Control
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each programme.
Page 129: Clear Voice Ii
CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better. AUDIO AUDIO Move Move Auto Volume : Off ● Auto Volume : Off ● ● Clear Voice II ◄ ► Clear Voice II Clear Voice II : Off : Off...
Page 130: Preset Sound Settings-Sound Mode
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the Treble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appro- priate sound options based on the programme content.
Page 131: Sound Setting Adjustment -User Mode
INFINITE SOUND Select this option to sound realistic. Infinite Sound : Infinite Sound is a patented Select AUDIO. LG proprietary sound processing technology that strives immersive 5.1 surround sound impression with front two loudspeakers. Select Infinite Sound. Select On or Off.
Page 132: Balance
SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO AUDIO Move Move Auto Volume : Off Auto Volume : Off ● ● Clear Voice II : Off Clear Voice II : Off ●...
Page 133: Tv Speakers On/ Off Setup
TV SPEAKERS ON/ OFF SETUP You can adjust the TV internal speaker status. In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers. AUDIO AUDIO Move...
Page 134: Dtv Audio Setting (In Digital Mode Only)
SOUND & LANGUAGE CONTROL DTV AUDIO SETTING (IN DIGITAL MODE ONLY) When different audio types exist in an input signal, this function allows you to select the audio type you want. AUDIO AUDIO Move Move Sound Mode : Standard Sound Mode : Standard ●...
Page 135: Selecting Digital Audio Out
SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output Dolby Digital if a channel is broadcast with Dolby Digital audio. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital.
Page 136: Audio Reset
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO AUDIO Move Move Sound Mode : Standard Sound Mode : Standard ● ● • Infinite Sound : Off • Infinite Sound : Off •...
Page 137: I/Ii
I/II STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY) When a programme is selected, the sound information for the station appears with the programme number and station name. Select Audio. Select the sound output. Broadcast On Screen Display Mono MONO Stereo STEREO Dual (Except for New Zealand) (Except for New Zealand) DUAL I, DUAL II, DUAL I+II...
Page 138: Nicam Reception (In Analogue Mode Only)
SOUND & LANGUAGE CONTROL NICAM RECEPTION (IN ANALOGUE MODE ONLY) (Except for New Zealand) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. When NICAM mono is received, you can select NICAM MONO or FM MONO.
Page 139: Speaker Sound Output Selection
SPEAKER SOUND OUTPUT SELECTION In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers. Select the sound output. Audio signal from audio L input is sent to the left loudspeaker and audio signal from L+R: audio R input is sent to the right loudspeaker.
Page 140: Country Selection
SOUND & LANGUAGE CONTROL COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. S elect your desired language. S elect your country. * If you want to change Country Select OPTION.
Page 141: Language Selection (In Digital Mode Only)
LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
Page 142 SOUND & LANGUAGE CONTROL Audio Language OSD Information < Audio Language Selection > Display Status Not Available ► When two or more audio languages are broadcast, you can MPEG Audio select the audio language. Dolby Digital Audio Audio for “Visual Impaired” Audio for “Hearing Impaired”...
Page 143: Time Setting
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock manually in Manual mode. You must set the time correctly before using on/off timer function. < Only Australia > When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
Page 144: Auto On/Off Time Setting
TIME SETTING AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to stand- by mode unless a button has been pressed.
Page 145: Sleep Timer Setting
SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. Select Sleep Timer. Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 min. When you switch the TV off, the preset sleep timer is cancelled.
Page 146: Parental Control / Ratings
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. If a channel is locked, enter the password to unlock it temporarily. LOCK LOCK Move Move Set Password Set Password ●...
Page 147: Block Programme
BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System ”On”. Enter a password to watch a blocked programme. Programme Edit Favourite Group : Page 1/1...
Page 148: Parental Control (In Digital Mode Only)
PARENTAL CONTROL / RATINGS PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you switch the set off.
Page 149: External Input Blocking
EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function in Lock System ”On” ■ Image shown may differ from your TV. ● ◄ ► LOCK LOCK Move Move ● Set Password Set Password ●...
Page 150: Key Lock
PARENTAL CONTROL / RATINGS KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off. LOCK LOCK Move...
Page 151: Teletext
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the- minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
Page 152: Top Text
TELETEXT TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. ■ Block / group / page selection With the blue button you can progress from block to block.
Page 153: Special Teletext Functions
SPECIAL TELETEXT FUNCTIONS ■ Press the T. OPT button and then use button to select the Text Option menu. Text Option ■ Index Index Time Select the each index page. Hold Reveal ■ Time Update When viewing a TV programme, select this menu to display the time at the top right Close hand corner of the screen.
Page 154: Digital Teletext
DIGITAL TELETEXT *This function works in New Zealand. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.
Page 155: Appendix
APPENDIX TROUBLESHOOTING The TV does not operate properly. ■ Check to see if there is any object between the TV and the remote con- trol causing an obstruction. Ensure you are pointing the remote control The remote control directly at the TV. does not work ■...
Page 156 APPENDIX The audio function does not work. ■ Press the + or - button. Picture OK & No ■ Sound muted? Press MUTE button. sound ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? No output from one ■...
Page 157: Maintenance
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of luke- warm water and a little fabric softener or dish washing detergent.
Page 158: Product Specifications
APPENDIX PRODUCT SPECIFICATIONS 50PK9 *** 60PK9 *** MODELS 50PK950-AA 60PK950-AA Dimensions with stand 1190.0 mm x 804.5 mm x 294.5 mm 1408.8 mm x 937.9 mm x 384.0 mm (Width x Height x Depth) without stand 1190.0 mm x 737.0 mm x 52.4 mm 1408.8 mm x 860.7 mm x 52.4 mm with stand 34.8 kg...
Page 159: Ir Codes
IR CODES This feature is not available for all models. Code (Hexa) Function Note Energy Saving R/C BUTTON POWER R/C BUTTON(POWER ON/OFF) INPUT R/C BUTTON RATIO R/C BUTTON TV/RAD R/C BUTTON Q.MENU R/C BUTTON MENU R/C BUTTON GUIDE R/C BUTTON R/C BUTTON Up ( R/C BUTTON...
Page 160: External Control Device Setup
APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an OPTICAL DIGITAL AUDIO OUT RS-232C IN external control device (such as a computer or an (CONTROL & SERVICE) RGB IN (PC) A/V control system) to control the product’s func- VIDEO R R R R R AUDIO...
Page 161: Set Id
Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► OPTION OPTION Move Move Language(Language) Language(Language) ● ● Country : Australia Country : Australia ● ● ● ● Hard of Hearing( Hard of Hearing( ISM Method : Normal ISM Method...
Page 162: Communication Parameters
APPENDIX Communication Parameters ■ Baud rate : 9600 bps ( UART ) ■ Use a crossed (reverse) cable. ■ Data length : 8 bits ■ Parity : None ■ Stop bit : 1 bit ■ Communication code : ASCII code Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr]...
Page 163 01. Power (Command: k a) 04. Volume Mute (Command: k e) ► To control Power On/Off of the set. ► To control volume mute on/off. You can also adjust mute using the MUTE button on Transmission remote control. [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Power Off 01 : Power On...
Page 164 APPENDIX 09. Tint (Command: k j) 13. Treble (Command: k r) ► To adjust the screen tint. ► To adjust treble. You can also adjust tint in the PICTURE menu. You can also adjust treble in the AUDIO menu. Transmission Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][r][ ][Set ID][ ][Data][Cr]...
Page 165 17. ISM Method (Command: j p) 20. Tune Command (Command: m a) ► To control the ISM method. You can also adjust ISM ► Select channel to following physical number. Method in OPTION menu. Transmission Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] [j][p][ ][Set ID][ ][Data][Cr] Data00 : High channel data Data 02: Orbiter...
Page 166 APPENDIX 22. Key(Command: m c) ► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 151. [c][ ][Set ID][ ][OK/NG][Data][x] 23. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure...
Page 167: Open Source Software Notice
This offer is valid for a period of three (3) years from the date of the distribution of this product by LG Electronics. You can obtain a copy of the GPL, LGPL, MPL licenses on the CD-ROM provided with this product.
Page 168 APPENDIX copyright © 2000 SuSE, Inc. copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. copyright © 2004, 2005, 2007, 2008 Red Hat, Inc. copyright © 2004 Nicholas Miell copyright © 2005 Lars Knoll & Zack Rusin, Trolltech copyright ©...
Page 169: Open Source License
OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
Page 170 APPENDIX 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, pro- vided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;...
Page 171 If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
Page 172 APPENDIX NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 173 GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Page 174 APPENDIX Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver- sion of the Library.
Page 175 Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
Page 176 APPENDIX c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
Page 177 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new prob- lems or concerns.
Page 178 APPENDIX MOZILLA PUBLIC LICENSE Version 1.1 --------------- 1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor.
Page 179 (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.
Page 180 APPENDIX (b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this infor- mation in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License.
Page 181 6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL"...
Page 182 APPENDIX 10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R.
Page 184 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. Model : Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Serial No.

This manual is also suitable for:

60pk9 series 50pk9 series 50pk7 series

LG 60PK7 series Owner's Manual

Quick Links

Related Manuals for LG 60PK7 series

Summary of Contents for LG 60PK7 series

This manual is also suitable for:

Table of Contents