Chapter 2 Standards And Adjustments; Mechanical - Canon GP215 Service Handbook
Hide thumbs
Also See for GP215:
- Installation instructions (4 pages) ,
- Service manual (458 pages) ,
- Service manual (458 pages)
Table of Contents
Advertisement
CHAPTER 2 STANDARDS AND ADJUSTMENTS
A. Mechanical
1
Image Leading Edge Margin
(REGIST; registration roller
ON timing)
Select 'REGIST' (4th screen) in service mode
(*3*; ADJUST) and adjust so that the image lead-
ing edge margin is 2.5 ±1.5 mm in Direct.
Figure 2-201
2
Left/Right Registration (front)
a. Pick-Up from the Cassette
Check to make sure that the margin on the
front side is 2.5 ±1.5 mm when paper is picked up
from each cassette.
(–)
(+)
2.5±1.5mm
0
2
4
6
8
10
Figure 2-202
Otherwise, perform the following:
1) Slide out the cassette to be adjusted.
2) Remove the two screws q, and remove the
horizontal registration adjustment assembly.
2.5±1.5mm
3) Loosen the hex screw, and slide the horizon-
tal registration plate toward the rear to adjust.
Hex screw diameter
STANDARDS AND ADJUSTMENTS
Horizontal registration
adjustment assembly
Figure 2-203
(front)
Horizontal
registration
plate
4mm
Figure 2-204
2
1
(rear)
Hex screw
2–1
Advertisement
Table of Contents
Troubleshooting
