Page 2
IMPORTANT THIS DOCUMENTATION IS PUBLISHED BY CANON INC., JAPAN, TO SERVE AS A SOURCE OF REFERENCE FOR WORK IN THE FIELD. SPECIFICATIONS AND OTHER INFORMATION CONTAINED HEREIN MAY VARY SLIGHTLY FROM ACTUAL MACHINE VALUES OR THOSE FOUND IN ADVERTISING AND OTHER PRINTED MATTER.
Page 3
INTRODUCTION This Service Manual contains basic data and figures for the NP6320 needed to service the machine in the field. Chapter 1 General Description introduces the copier's features and specifications, shows how to operate the copier, and explains how copies are made.
System Configuration The NP6320 is designed to accommodate the following for fully automated copy work: ADF-A1 A stack of documents may be placed for automatic pick-up and feed. Control Card V With the card, the volume of copy work may be put under control.
HQ jumping toner. • The copier uses Canon’s own HQ (high quality) jumping toner for reproduction of clear characters and photos. • The toner is a single-component type, which provides stable images.
Note: EEPROM is a type of ROM in which data may be erased or stored newly. For this reason, the NP6320’s RAM and ROM are not backed up by a lithium battery. Note: The NP6320 is equipped with an A/D converter and, therefore, its microprocessor can read analog signals.
Page 178
Guide to Troubleshooting Tables The troubleshooting procedures in this manual are prepared in the form of tables, rather than flow charts. Study the following for an idea of how to consult the tables. EX. AC power is absent. Cause/Fault Step Checks YES/NO Remedies...
Page 304
This pubication is printed on 70% reprocessed paper. PRINTED IN JAPAN (IMPRIME AU JAPON) 1299AB0.91-1 Download Service Manual And Resetter Printer at http://printer1.blogspot.com...