Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Projector Features Horizontal keystone adjuster Quick and Easy Set up, Projection, and Storage This allows you to quickly correct horizontal distortion in the projected • Turn the projector on and off by simply plugging in or unplugging. image. This is useful if you cannot install the projector parallel to the •...
Projector Features Increasing projection content in wide (WXGA) screen Making the most of the remote control You can use the remote control to perform operations such as enlarging With a computer that has a 16:10 WXGA wide LCD display, the image can be projected in the part of the image.
You can download EasyMP Network Projection from the following Web site. http://www.epson.com You can download Epson iProjection for free from the App Store or from Google play. Any fees incurred when communicating with the App Store or Google play are the responsibility of the customer.
Part Names and Functions Name Function Front/Top Front adjustable foot When setup on a surface such as a desk, extend the foot to adjust the position of the image. s "Adjusting the Image Position" p.41 Close when not using the projector to protect the lens. By A/V mute slide closing during projection you can hide the image and the sound.
Part Names and Functions Name Function Rear • Connects the projector to a computer using a USB cable, USB-B port and projects the images on the computer. s "Projecting with USB Display" p.33 • Connects the projector to a computer using a USB cable to use the Wireless Mouse function.
Part Names and Functions Name Function Base Rear feet When setup on a surface such as a desk, turn to extend and retract to adjust the horizontal tilt. s "Adjusting the Horizontal Tilt" p.41 When setup on a surface such as a desk, extend the foot to Front adjustable foot adjust the position of the image.
Part Names and Functions Name Function Control Panel [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur. s "Using the Help" p.104 • Stops the current function. [Esc] button • If pressed when the Configuration menu is displayed, it moves to the previous menu level.
Part Names and Functions Name Function Remote Control Power button Turns the projector power on or off. s "From Installation to Projection" p.31 Changes to images from the Computer port. [Computer] button Each time the button is pressed, the image cycles through [Video] button the S-Video, Video, and HDMI/MHL ports.
Page 16
Part Names and Functions Name Function Name Function • When the Configuration menu or the Help screen is [Split] button Each time the button is pressed, the image changes ] button displayed, it accepts and enters the current selection and between projecting two images simultaneously by moves to the next level.
Page 17
Part Names and Functions Name Function [MHL Menu] button Displays the settings menu for the device linked to the projector's MHL port. Switches to the image from the network connected device. [LAN] button Each time the button is pressed, it cycles through the [USB] button following images: •...
Part Names and Functions Replacing the remote control batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries.
Installing the Projector Installation Methods Warning • A special method of installation is required when suspending the projector The projector supports the following four different projection methods. from a ceiling (ceiling mount). If it is not installed correctly, it could fall Install the projector according to the conditions of the installation location.
Installing the Projector • Install the projector so that it is parallel to the screen. Screen Size and Approximate Projection Distance If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image. Projection size is determined by the distance from the projector to the screen.
Connecting Equipment The port name, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods. When using the supplied computer cable Connect the computer's display output port to the projector's Computer port.
Connecting Equipment Connecting a Smartphone or Tablet Device You can connect smartphones and tablet devices. By using a commercially available MHL cable, you can connect the MHL port on your device to the HDMI/MHL port on the projector. You can send the audio with the projected image. When you connect a smartphone or tablet device to the projector, the device starts charging when images are projected.
Connecting Equipment Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. When using a commercially available video or S-video cable Connect the video output port on the image source to the projector's Video port. Or, connect the S-video output port on the image source to the projector's S-Video port. You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio port using a commercially available audio cable.
Connecting Equipment Attention • Turn off the equipment you want to connect before connecting. If the input source is on when you connect it to the projector, it could cause a malfunction. • If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction. •...
Page 27
Connecting Equipment Attention • If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB devices should be connected to the projector directly. • When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk. •...
Connecting Equipment Installing the Wireless LAN Unit By installing the supplied or optional wireless LAN unit, you can project the computer screen that is connected to the wireless LAN over a network. Connect the wireless LAN unit to the projector's USB-A port. •...
Page 29
Connecting Equipment If the Wireless LAN unit is installed on the projector, press the [LAN] button on the remote control. The LAN standby screen is displayed. Check that the SSID and IP address information are displayed on the LAN standby screen, and then remove the Wireless LAN unit.
Projecting Images Open the A/V mute slide. From Installation to Projection Turn on your computer. This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. Change the computer's screen output. When using a laptop computer, you need to change the screen Attention output from the computer.
Projecting Images Automatically Detect Input Signals and Change The following screen is displayed while no image signals are input. the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Using the remote control Using the control panel When two or more image sources are connected, press the [Source Search] button until the target image is projected.
Projecting Images Switching to the Target Image by Remote Control Projecting with USB Display You can change directly to the target image by pressing the following You can use a USB cable to connect the projector to a computer to project buttons on the remote control.
OS X 10.7.x 32/64 bit OS X 10.8.x OS X 10.9.x For Windows 2000 Power PC G4 1GHz or faster Double-click Computer, EPSON PJ_UD, and then Recommended: Core Duo 1.83GHz or faster EMP_UDSE.EXE. Amount of 512 MB or more For Windows XP Memory Driver installation starts automatically.
• If nothing is projected for some reason, click All Programs - the USB cable. EPSON Projector - Epson USB Display - Epson USB Display Vx.xx on your computer. • If the USB Display setup folder is not displayed automatically •...
Page 36
Open Charms, and then select Search. Right-click (press and hold) Epson USB Display Ver.XXX. Select Uninstall from the app bar. Select Epson USB Display, and then select Uninstall. Follow the on-screen instructions to uninstall. For OS X Open the Applications folder, double-click USB Display, and then double-click Tool.
Adjusting Projected Images • Correcting manually (Quick Corner) Correcting Keystone Distortion Manually correct the four corners independently. You can correct keystone distortion using one of the following methods. • Correcting automatically (Auto V-Keystone) Automatically corrects vertical keystone distortion. • Correcting manually (H-Keystone Adjuster) Manually corrects horizontal keystone distortion using the horizontal keystone adjuster.
Adjusting Projected Images • Auto V-Keystone works only when Projection is set to Front from • When using horizontal keystone adjuster, set H-Keystone Adjuster the Configuration menu. to On. s Extended - Projection p.85 s Settings - Keystone - H/V-Keystone - H-Keystone Adjuster p.84 •...
Page 39
Adjusting Projected Images Press the [Menu] button while projecting. "Using the Configuration Menu" p.79 Using the remote control Using the control panel Select Keystone from Settings. Press the [ ] buttons to correct horizontal distortion. You can also set H/V-Keystone from the Configuration menu. Select Quick Corner, and then press the [ ] button.
Page 40
Adjusting Projected Images Using the [ ], [ ], [ ], and [ ] buttons on the remote control, or the [ ], [ ], [ ], and [ ] buttons on the control panel, correct the position of the corner. When you press the [ ] button, the screen shown in step 4 that allows you to select the area to be corrected is displayed.
Adjusting Projected Images Adjusting the Image Position If the [Esc] button is held down for about two seconds while the corner selection screen from step 4 is displayed, the following screen is displayed. Press the foot adjust lever to extend the front adjustable foot. You can adjust the position of the image by tilting the projector up to 12 degrees.
Adjusting Projected Images • Adjust the volume from the Configuration menu. Correcting the Focus Settings - Volume p.84 You can correct the focus using the focus ring. Caution Do not start at high volume. A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so that you can power on and then gradually increase the volume.
Adjusting Projected Images Press the [Menu] button. Mode Application "Using the Configuration Menu" p.79 Whiteboard Ideal for making presentations using a whiteboard. Using the remote control Using the control panel *1 This selection is only available when the input signal is RGB or when the source is USB Display, USB, or LAN.
Adjusting Projected Images Changing the aspect mode Auto Iris can only be set when the Color Mode is Dynamic or Theatre. Projecting images from video equipment or from the HDMI/MHL port Each time the [Aspect] button is pressed, the aspect mode changes in the Changing the Aspect Ratio of the Projected Image order Normal or Auto, 16:9, Full, Zoom, and Native.
Page 45
Adjusting Projected Images Projecting images from a computer If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the The following shows projection examples for each aspect mode. computer panel.
Projection Functions Left Right Screen Projecting Two Images Simultaneously (Split Screen Com‐ S-Vid‐ Video HDMI Screen) puter Dis‐ play You can simultaneously project images from two sources on the right and USB Dis‐ left of the screen. play Operating procedures Projecting on a split screen Press the [Split] button while projecting.
Page 48
Projection Functions Press the [Menu] button. Select each input source for Left and Right. The Split Screen Setup screen is displayed. Select Source, and then press the [ ] button. Only input sources that can be combined can be selected. "Input sources for split screen projection"...
Page 49
Projection Functions Switching the left and right screens The projected images will appear as shown below after setting the screen size. Use the following procedure to switch the projected images displayed on Equal Larger Left the left and right screens. Press the [Menu] button during split screen projection.
Projection Functions • Select Exit Split Screen from the Configuration menu. Projecting Without a Computer (PC Free) Settings - Split Screen - Split Screen Setup p.84 By connecting a USB storage device such as a USB flash drive or a USB hard disk to the projector, you can project the files stored on the device Restrictions during split screen projection without using a computer.
Projection Functions PC Free operating methods Type File Type (Ex‐ Notes tension) Although the following steps are explained based on the remote control, • Cannot project images with a resolution greater Movie .avi (Motion you can perform the same operations from the control panel. JPEG) than 1280x720.
Page 52
Projection Functions Projecting images • You can also insert a memory card into a USB card reader and then connect the reader to the projector. However, some commercially available USB card readers may not be compatible with the Press the [ ], [ ], [ ], or [ ] buttons to select the file or folder projector.
Projection Functions Rotating images Projecting the selected images or movies You can rotate the played images in 90˚ increments. The rotating function Attention is also available during Slideshow. Do not disconnect the USB storage device while it is being accessed. PC Free may not operate correctly.
Projection Functions Press the [ ], [ ], [ ], or [ ] buttons to position the cursor over the folder for the Slideshow that you want to run, and then press the [ ] button. Select Slideshow at the bottom right of the file list screen, and then press the [ ] button.
The following table shows the details for each item. Projecting Using a QR Code By reading a QR code displayed on the projected screen with Epson iProjection (V1.3.0 or later), you can easily project data on a smartphone or tablet device.
Projection Functions Setting the display method for QR codes Set the QR code display from the Configuration menu. Press the [Menu] button. "Using the Configuration Menu" p.79 Using the remote control Using the control panel Select Text & QR Code. Select Network Configuration from Network.
Make sure you read the QR code from in front of the screen so that it fits into the guide. If you are too far from the screen, the code Start Epson iProjection on your smartphone or tablet device. may not be read.
Projection Functions Each time you press the [A/V Mute] button or open/close the lens cover, Freezing the Image (Freeze) A/V Mute turns on or off. When Freeze is activated on moving images, the frozen image continues to Remote control Projector project on the screen, so you can project a moving image one frame at a time like a still photo.
Projection Functions You can select the shape of the pointer icon from the Configuration menu. s Settings - Pointer Shape p.84 Enlarging Part of the Image (E-Zoom) This is useful when you want to expand images to see them in greater Display the Pointer.
Projection Functions Move the Cross ( ) to the area of the image that you want to Using the Remote Control to Operate the Mouse enlarge. Pointer (Wireless Mouse) Remote control You can control the computer's mouse pointer from the projector's remote control.
Projection Functions Once set, the mouse pointer can be controlled as follows. • When any pair of adjacent [ ], [ ], [ ], or [ ] buttons are Moving the mouse pointer pressed at the same time, the pointer can be moved diagonally. ][ ][ ] buttons: •...
Projection Functions 1. Set the projector ID. Opera‐ Combinations Descriptions Set a unique projector ID for each of the target projectors so that you can tion limit which projector is being corrected. Possible Projector ID: 1 When 0 is selected with the 2.
Page 63
Projection Functions Select Projector ID from Extended. Selecting the ID for the projector you want to operate using the remote control Select the ID each time you turn on the projector. When the projector is turned on, the ID set for the remote control is 0. Point the remote control at the remote receiver of the target projector and press the [ID] button on the remote control.
Projection Functions Correcting Saving a User's Logo After setting up the projectors, correct the brightness and tone for each You can save the image that is currently being projected as a User's Logo. projector to reduce the differences. • Once a User's Logo has been saved, the logo cannot be returned to Correcting color differences the factory default.
Page 65
Projection Functions Move the box to select the part of the image to use as the User's Logo. You can perform the same operations from the projector's control panel. Remote control • When User's Logo Protection from Password Protection is You can save at 400x300 dots in size.
Page 66
Projection Functions When the message "Save this image as the User's Logo?" is displayed, select Yes. The image is saved. After the image has been saved, the message "Completed." is displayed. • When a User's Logo is saved, the previous User's Logo is erased.
Security Functions • User's Logo Protection The projector has the following enhanced security functions. Even if someone tries to change the User's Logo set by the owner of the • Password Protect projector, it cannot be changed. When User's Logo Protect is set to On, You can limit who can use the projector.
Security Functions When the message "Change the password?" is displayed, select Yes and • If Password Protect is already activated, you must enter the then press the [ ] button. The default password is set to "0000". Change password. this to your own desired Password. If you select No, the screen displayed If the password is entered correctly, the Password Protect in step 2 is displayed again.
"The projector's operation will be locked. Contact Epson as described in your documentation." Select Control Panel Lock from Settings. Epson Projector Contact List...
Security Functions You can release the control panel lock by one of the following two methods. • Select Off from Control Panel Lock. s Settings - Control Panel Lock p.84 • Press and hold down the [ ] button on the control panel for about seven seconds, a message is displayed and the lock is released.
EasyMP Monitor lets you carry out operations such as checking the status of multiple Epson projectors that are connected to a network at a computer Use Microsoft Internet Explorer 8.0 or later as the Web browser. Use Safari monitor, and controlling the projectors from the computer.
Monitoring and Controlling • Port Number Displaying the Web Remote screen The Web Remote function allows you to perform projector remote control operations with a Web browser. Displaying the Web Control screen Use the following procedure to display the Web Control screen. Display the Web Control screen.
Monitoring and Controlling Name Function Name Function [Computer] button Changes to images from the Computer port. [Volume] buttons [a] Decreases the volume. [a][b] [b] Increases the volume. Each time the button is pressed, the image cycles through [Video] button s "Adjusting the Volume" p.42 the Video, S-Video, and HDMI/MHL ports.
• Power Err. (Ballast) following preparations must be carried out. See the following to deal with problems or warnings. Install the USB communication driver (EPSON USB-COM Driver) to "Reading the Indicators" p.106 your computer. For information about the EPSON USB-COM Driver,...
Monitoring and Controlling contact your local dealer or the nearest address provided in the Item Command Epson Projector Contact List. USB Display SOURCE 51 Epson Projector Contact List SOURCE 52 SOURCE 53 Set USB Type B to Link 21L from the projector's Configuration menu.
Wireless LAN - IP Settings p.89 0899 Other communication errors If restarting the projector or EasyMP Network Projection does not solve the problem, contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List...
Using the Configuration Menu This section explains how to use the Configuration menu. Select a submenu item. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations.
List of Functions Top Menu Name Submenu Name Items or Setting Values Configuration Menu Table Video Signal Auto, NTSC, NTSC4.43, PAL, Settable items vary depending on the model being used and the image M-PAL, N-PAL, PAL60, and SECAM signal and source being projected. Aspect Normal, Auto, 16:9, Full, Zoom, Top Menu Name...
List of Functions Top Menu Name Submenu Name Items or Setting Values Top Menu Name Submenu Name Setting Values Sleep Mode On and Off Search Access Point Sleep Mode Timer 1 to 30 IP Settings DHCP, IP Address, Subnet Mask, and Gateway Address Lens Cover Timer On and Off...
List of Functions Submenu Function Image Menu Color Temp. (This item cannot be selected if Color Mode is set to sRGB Settable items vary depending on the image signal and source currently Adjusts the tint for the images. You can adjust tints in three stages being projected.
Page 83
List of Functions You cannot make settings on the Signal menu when the source is USB Submenu Function Display, USB, or LAN. Progressive (When a component video or RGB video is being input, this setting can only be adjusted if the signal being input is an interlaced signal (480i/576i/1080i).
List of Functions Submenu Function Settings Menu Overscan Changes the output image ratio (the range of the projected image). You can set the cropping range to Off, 4%, or 8%. When the source is HDMI, Auto is available. When Auto is selected, it automatically changes to Off or 8% according to the input signal.
List of Functions Submenu Function Submenu Function Pointer Shape You can select the shape of the pointer. Reset You can reset all adjustment values on the Settings menu to their default settings, except for User Button. Pointer 1: See the following to return all menu items to their default settings.
Page 86
List of Functions Submenu Function Submenu Function Display You can make settings related to the projector's display. Operation Direct Power On: Set to On to turn on the projector simply by plugging it in. Messages: When set to Off, the following items will not be displayed.
Displays available region information for the Wireless LAN unit being used. For more details, contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List • By using a Web browser of a computer connected to the projector...
List of Functions Notes on operating the Network menu Selecting from the top menu and sub menus, and changing selected items is the same as making operations from the Configuration menu. When done, make sure you go to the Complete menu, and select Yes, No, or Cancel.
Set the display format for the projector's network information. When a QR code is displayed, you can connect to the network by simply reading the QR code with Epson iProjection. The default value is Text & QR Code. s "Projecting Using a QR Code"...
Page 90
List of Functions Submenu Function Submenu Function Channel (This can only be set if Connection Mode is set to Quick.) IP Settings (This item can only be set if Connection Mode is set to Advanced.) Select the frequency band used by the wireless LAN from 1ch, 6ch, or 11ch.
List of Functions Security menu Submenu Function Passphrase Enter the passphrase. You can enter at least 8 and up to 63 single- Available when the Wireless LAN unit is installed. byte alphanumeric characters. When using it with EasyMP Network Projection, you do not need to input the passphrase in the computer if it is the initial (default) passphrase.
List of Functions Mail menu Submenu Function Address 1 Set‐ You can input the email address of the destination to send the When this is set, you receive an email notification if a problem or warning ting/Address 2 notification email to. You can register up to three destinations. occurs in the projector.
0 to 255) Bonjour Set this to On when connecting to the network using Bonjour. See Apple's Web site for more information on the Bonjour service. http://www.apple.com/ You can switch the EPSON Message Broadcasting function to Message Broad‐ enable or disable. casting...
List of Functions Submenu Function ECO Menu Sleep Mode When set to On, this automatically stops projection when no When you make ECO menu settings, the projector performs functions to image signal is being input and no operations are carried out for a specified length of time.
List of Functions Submenu Function Info Menu (Display Only) Version Displays the projector's firmware version. Lets you check the status of the image signals being projected and the status The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours of the projector.
Performing Batch Setup for Multiple Projectors Once the Configuration menu content has been set for one projector, you Setup Using a USB Flash Drive can use it to perform batch setup for multiple projectors (batch setup function). The batch setup function is only for projectors with the same This section explains how to perform batch setup using a USB flash drive.
Page 97
Performing Batch Setup for Multiple Projectors When the projector's indicators turn on as follows, release the [Esc] • Connect the USB flash drive directly to the projector. If the button. USB flash drive is connected to the projector through a USB hub, the settings may not be saved correctly.
Performing Batch Setup for Multiple Projectors When writing completes normally, the projector enters standby status. Power: Blue - On • When the USB flash drive contains 1 to 3 types of batch setup files, the file is reflected to the projector with the same When the projector is in standby status, remove the USB flash model number.
Performing Batch Setup for Multiple Projectors While holding down the [Menu] button on the remote control or Caution the control panel, connect the power cord to the projector. • Do not disconnect the power cord from the projector while the settings are being written.
Performing Batch Setup for Multiple Projectors When the projector's indicators turn on as follows, release the [Esc] Saving settings to a computer button. Disconnect the power cord from the projector, and check that all of the projector's indicators have turned off. Connect the computer's USB port to the projector's USB-B port with a USB cable.
Performing Batch Setup for Multiple Projectors When the projector's indicators turn on as follows, release Reflecting saved settings to other projectors the [Menu] button. Disconnect the power cord from the projector, and check that all of the projector's indicators have turned off. Connect the computer's USB port to the projector's USB-B port with a USB cable.
Stop using the projector, remove the power plug Caution from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Do not disconnect the power cord from the projector while the settings Projector Contact List.
Using the Help If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. Press the [Help] button. The Help screen is displayed. Using the remote control Using the control panel Using the remote control...
Page 105
Using the Help See the following if the Help function does not provide a solution to the problem. s "Problem Solving" p.106...
Problem Solving If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. See the following if the indicators do not show clearly what the problem might be. "When the Indicators Provide No Help" p.110 Reading the Indicators The projector is provided with the following four indicators.
Page 107
Internal Error Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Blue - Flash‐ Orange - Epson Projector Contact List...
Page 108
Epson Projector Contact List. Epson Projector Contact List If the lamp is cracked: Contact your local dealer or the nearest address provided in the Epson Projector Contact List. (Images cannot be projected until the lamp is replaced.) Epson Projector Contact List When using at an altitude of 1500 m or more, set High Altitude Mode to On.
Page 109
• If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Problem Solving Other Problems When the Indicators Provide No Help • No sound can be heard or the sound is faint p.117 If any of the following problems occur and the indicators do not offer a • There is noise in the audio (only when projecting USB display) p.118 solution, refer to the pages given for each problem.
Problem Solving Problems Relating to Images No images appear Check Remedy Did you press the [t] power button? Press the [t] power button to turn the power on. Are the indicators switched off? The power cord is not connected correctly or power is not being supplied. Connect the projector's power cord correctly.
Problem Solving Moving images are not displayed Check Remedy Is the computer's image signal being output to the LCD and the Change the image signal from the computer to external output only. Check your computer's documentation, or contact monitor? the computer's manufacturer. (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Are the contents of the moving image you are trying to project...
Problem Solving The message "No Signal" is displayed Check Remedy Are the cables connected correctly? Check that all the cables required for projection are securely connected. s "From Installation to Projection" p.31 Is the correct port selected? Change the image by pressing the [Source Search] button on the remote control or the control panel. s "Automatically Detect Input Signals and Change the Projected Image (Source Search)"...
Signal - Tracking, Sync. p.82 Is Transfer layered window selected? Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then clear the Transfer layered window check box. (Only when projecting USB Display) The mouse cursor flickers (only when projecting USB Display) Is Make the movement of the mouse pointer smooth.
Problem Solving The image is truncated (large) or small, the aspect is not suitable, or the image has been reversed Check Remedy Is a wide panel computer image being projected? Change the setting according to the signal for the connected equipment. (Only when projecting computer images) s Signal - Resolution p.82...
Problem Solving Check Remedy Are the cables connected correctly? Check that all the cables required for projection are securely connected. Check that no cables are disconnected and that there are no poor contacts in the cables. s "Connecting Equipment" p.23 Is the contrast adjusted correctly? Adjust the Contrast setting from the Configuration menu.
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List Is the Control Panel Lock set to Full Lock? Press the [t] power button on the remote control.
If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output. Is Output audio from the projector selected? Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select Output audio from the projector.
ECO - Standby Mode p.94 Did a fatal abnormality occur and the projector come to a sudden If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact stop? List. Epson Projector Contact List Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.
Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
Cleaning You should clean the projector if it becomes dirty or if the quality of Attention projected images starts to deteriorate. Do not rub the lens with harsh materials or subject the lens to shocks as it can easily become damaged. Caution Turn off the projector's power before cleaning.
Page 122
Cleaning • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s "Replacing the Air Filter" p.126 • It is recommended that you clean these parts at least once every three months.
You should always have a spare lamp unit ready in case it is needed. • We recommend the use of genuine EPSON option lamps. The use of non- genuine lamps may affect projection quality and safety. Any damage or The message is displayed for 30 seconds.
Page 124
Replacing Consumables Warning • When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that the lamp is cracked, and you should stand to the side of the lamp cover, not underneath it.
Page 125
Grip the raised section of the old lamp and remove it. If the Lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice. Epson Projector Contact List...
Replacing Consumables Replace the lamp cover. Replacing the Air Filter Air filter replacement period If the message is displayed frequently even though the air filter has been cleaned, replace the air filter. How to replace the air filter The air filter can be replaced even when the projector is suspended from a ceiling.
Page 127
Replacing Consumables Close the air filter cover. Dispose of used air filters properly in accordance with your local regulations. Filter frame: ABS Filter: Polyurethane foam Install the new air filter. Slide the air filter from the outside and press in until it firmly clicks into place.
Special expertise is required to suspend the projector from a ceiling. Contact A compact screen that can be carried easily. (Aspect Ratio 4:3) your local dealer or the nearest address provided in the Epson Projector 60" portable screen ELPSC27 Contact List.
Supported Monitor Displays Even when signals other than those mentioned above are input, it is likely Supported Resolutions that the image can be projected. However, not all functions may be supported. Computer signals (analog RGB) Signal Refresh Rate (Hz) Resolution (dots) Component video 60/72/75/85 640x480...
Specifications Projector General Specifications EB-W28 Product name Dimensions 297 (W) x 79 (H) x 234 (D) mm 0.59" Wide LCD panel size Display method Polysilicon TFT active matrix 1,024,000 Resolution WXGA (1280 (W) x 800 (H) dots) x 3 Manual Focus adjustment Manually (1-1.2)
Page 135
Specifications Mini DIN 4-pin S-Video port RCA pin jack x 2 Audio port HDMI (Audio is only supported by PCM) HDMI/MHL port USB connector (Type A) USB-A port *1, 2 USB connector (Type B) USB-B port Supports USB 2.0. However, USB ports are not guaranteed to operate all devices that support USB. USB 1.1 is not supported.
Page 136
Specifications This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
Page 137
CPU Boards and Power Supplies used with Class B Personal Computers Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference Epson America, Inc. in a residential installation. This equipment generates, uses, and can radiate Located at:...
Glossary This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. Ad hoc mode A method of wireless LAN connection that communicates with wireless LAN clients without using an access point. The ratio between an image's length and its height.
Page 140
Glossary An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and SNMP computers connected to a TCP/IP network. An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by sRGB computer operating systems (OS) and the Internet.
7 operating system ® ® Microsoft Windows 8 operating system Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this ® ® Microsoft Windows 8.1 operating system product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or In this guide, the operating systems above are referred to as "Windows...
Index Control panel ..........14 Control Panel Lock ........69 A/V Mute ............57 Gateway Address ......... 90 Control panel lock ........84 A/V Mute Timer .......... 94 Cross .............. 60 Air exhaust vent ........... 11 Air filter replacement period ....126 HDMI port ...........
Page 144
Index Light Optimizer ........... 94 Position ............83 Power indicator .......... 106 Screen size ........... 130 Power inlet ............ 12 Screen switching time ......... 55 Power On Protect ........67 Mail Notification ........74, 92 Security menu ..........91 Presentation ........... 42, 50 Mail Notification menu ......
Page 145
Index USB Type B ........... 86 USB-A port ........... 12 USB-B port ........... 12 User button ........... 85 User's Logo ........... 64 User's Logo Protection ........ 67 Video port ............. 12 Video signal ..........83 Volume ............85 Volume buttons ........... 14 Web Browser ..........