Powering On The Phone - Cisco 7920 Phone Manual

Unified wireless ip phone for cisco unified callmanager 5.0 (sccp)

Hide thumbs Also See for 7920:

Table of Contents

Powering On the Phone

After charging the battery, you must power on the phone to make and receive calls.

If you want to...

Power on the phone

Check signal strength The signal icon indicates the strength of the signal between the wireless access

Tips

• When the phone receives a weak signal, the phone displays this warning message, "Weak signal

detected" and sends a tone or vibration as specified in your active profile. See the "Choosing a

User Profile" section on page 49 for more information.

• When you move the phone out of signal range, you lose connection with the wireless LAN.

• When you reenter the range of the signal, you can press the

reconnect to the wireless network.

Then...

1. Press and hold the

2. You might need to use a username and password to access the wireless

network. For more information, see "Setting Username and Passwords"

section on page 17.

3. After completing authentication, the phone displays the main screen and

is ready to place or receive calls.

point and your phone. Your phone must have from 2—6 bars to place or

receive calls.

(red) key until the phone powers on.

(green key) to immediately

OL-9474-01

Table of Contents