Watts Industries MILUX User Manual

Chrono-thermostat

Hide thumbs Also See for MILUX:

Download this manual See also: User Manual

ATTERIES REPLACEMENT

Open the front panel by pressing on then left side

button. Then remove the front panel by opening it like

a window. You now have access to the batteries

& W

IMENSIONS

ECHNICAL CHARACTERISTICS

Measured temperature precision

Set temperature precision

Set temperature range

Regulation characteristics

Driving element

Connection

Batteries

IRING

How to change the batteries

Replace the three LR6 AA 1.5V batteries with new ones

IMPORTANT: You have 1 minute to change the batteries

0.1°C (or 0.1°F)

0.5°C (or 0.5°F)

5°C - 35°C for comfort and reduced, 0,5°C – 10°C for anti-freeze

- regulation speed: 7.5 cycle per hour (cycle of 8 minutes)

- regulation band:

2°K of proportional band (with adjusted power)

8A RELAY (with normally ON and normally OFF contacts).

3 points screw connector on the rear part of the box.

3x LR6 AA 1.5V Alkaline batteries.

(Alkaline cells recommended)

N. OPEN

N. CLOSED

COMMON

Page 1 How to change the batteries ATTERIES REPLACEMENT Open the front panel by pressing on then left side Replace the three LR6 AA 1.5V batteries with new ones button. Then remove the front panel by opening it like (Alkaline cells recommended) IMPORTANT: You have 1 minute to change the batteries a window.
Page 2: User Guide
MILUX Chrono-thermostat OVERVIEW The MILUX Chrono-thermostat is a programmable digital thermostat able to control and regulate directly the central heating (Electric, Gas, Oil) or a cooling system. It’s programmable function enables power savings in accordance to your every day life during a day or a week.
Page 3 MILUX regulation will now follow comfort temp. AUTOMATIC operating mode : MILUX Chrono-thermostat will follow automatically the program in accordance to the actual time. By pressing + or - key you can override the current set temperature until the next change in the program.
Page 4 OFF mode, maintain + and – keys pressed and press simultaneously on the Go to key. All the segments will lit up during a few seconds showing that the MILUX have been erased and restarted with factory defaults parameters. Defaults parameters are : 21°C 17°C...