Table of Contents
Advertisement
1 2 4
Picture and Sound Controls
Adjusting the audi
Press the
Auto:
Manual:
3
A/V (arrow) buttons to select Auto or Manual.
This mode automatically adjusts the audio timing to meet
the video timing.
The time lag might be large between the image and sound
depending on the connected equipment (amplifier etc.). In
that case, select Manual.
You can manually adjust the audio signal timing to meet
the video signal timing.
4
Press the EXIT button.
Delay Adjustment
1
Press the SETUP button.
2
Select Sound > Digital Audio Output > Delay Adjustment and
press the OK button.
3
Press the _l/_ (arrow) buttons to adjust the audio signal timing (0 -
250ms) to meet the video signal timing.
4
Press the EXIT button.
NOlr£
.:o Thisfeature is grayedoutwhenAudioDelay is in Auto.
¢ A time lagwill occurwhenthevideosignalor audiosignalis changed.
Adjustthetiming accordingly.
¢ Whenadjustingthetiming,turn downthevolumeof theAV equipment
usedasfaraspossible.
Depending o n theequipment, n oiseetc.mayoccurwhenthesignalis
changed.
¢
Depending o n theconnected equipment ( amplifier, e tc.),adjustment
maynot bepossible.
¢ Whentheopticalaudio
output
setting(Auto,.--,POM)is changed, i t
maybe necessary t o adjustthetiming again.
•:o Donotuseotherthanfor audiooutputfromtheAVamplifier, e tc.
(Malfunction mayoccur)
Using the Dolby®Digital Dynamic Range Controlfeature
You can further compress Dolby _ Digital and Dolby* Digital Plus
dynamic range so you can switch from digital to analog broadcasts at the
same dynamic range.
1
Press the SETUP button.
2
Select Sound > Dynamic Range Control and press the OK button.
3
Press the A/V (arrow) buttons to select On.
Advertisement
Table of Contents
