Panasonic Viera TC-L32DT30 Owner's Manual page 50
32”/37” class 1080p lcd hdtv
Hide thumbs
Also See for Viera TC-L32DT30:
- Specifications (2 pages) ,
- Technical manual (80 pages) ,
- Owner's manual (74 pages)
Table of Contents
Advertisement
Available languages
Available languages
Settings
PC adjustments
HDMI settings
• Some menus are grayed out depending on the input signal or condition.
(e.g. "3:2 pulldown" will be grayed out if the input signal is high definition or you are viewing photos, etc.)
Advanced
picture
50
Items
Item Description
Reset to defaults
Resets PC adjustments.
Sync
H & V
On green
Dot clock
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or
is blurred.
H-position
Adjusts the horizontal position.
V-position
Adjusts the vertical position.
Clock phase
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase
so that a clear picture appears.
●
It may not be possible to display a clear picture due to poor input signals.
Input
Switches to wide display.
●
VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),
resolution
WXGA (1,280×768 pixels)
●
Options change depending on signals
H-frequency
Displays the H (Horizontal)/V (Vertical) frequencies.
Display range
V-frequency
Horizontal: 15 - 110 kHz
Vertical:
HDMI/DVI RGB
Auto/
range (HDMI 1-4)
Standard
(16-235)/
Nonstandard
Contents type
Off/Auto/Photo/
(HDMI 1-4)
Graphics
3D Y/C filter
Off/On
Color matrix
SD/HD
Block NR
Off/On
Mosquito NR
Off/On
Motion Picture
Off/Weak/Strong
Pro 5
Black level
Dark/Light
3:2 pulldown
Off/On/Auto
24p Direct in
60Hz/48Hz
(3D mode only)
The H and V sync signals are input from the HD/VD connector. (p. 58)
Uses a synchronized signal on the Video G signal, which is
input from the G connector. (p. 58)
48 - 120 Hz
Prevents the blown out highlights and blocked up shadows when
a wide-range signal is received. Selects between standard RGB
range (16-235 bits) or non-compliance (0-255 bits).
Auto: Switches the RGB range (Standard (16-235)/Nonstandard)
depending on the HDMI signal information.
Sets content type to each HDMI input.
Auto: Switches content type automatically depending on the
HDMI signal information.
Photo: Best setting for JPEG viewing.
Graphics: Best setting for On-Screen display of connected
equipment.
Minimizes noise and cross-color in the picture.
Selects image resolution of component-connected devices.
SD: Standard Definition
Only used with 480p video signal.
Reduces noise of specific digital signals of DVD, Cable box, etc.
Reduces HDTV flicker noise in the contoured sections of an
image.
Improved moving picture quality by reducing motion blur.
Selects Dark or Light. Valid only for external input signals.
Adjusts the picture recorded in 24 fps for optimum quality.
48Hz: Achieves more cinematic playback by reproducing the
movie contents at twice the speed of 24 frames per second.
HD: High Definition
Hide quick links:
Advertisement
Chapters
Table of Contents
