Playing Clips; Playing Recorded Clips - Sony PXW-FS7 Operating Instructions Manual
Solid-state memory camcorder
Hide thumbs
Also See for PXW-FS7:
- Operating instructions manual (128 pages) ,
- Quick reference manual (93 pages) ,
- Before using (79 pages)
Table of Contents
Advertisement
4.
Special recording information
Displays the recording mode only if the clip was
recorded using a special recording mode.
For Slow & Quick Motion clips, the frame rate
is displayed on the right.
5.
Clip duration
6.
Creation date
Playing Clips
Playing Recorded Clips
You can play recorded clips when the camcorder
is in recording standby (Stby) mode.
1
Insert an XQD memory card for
playback.
2
Press the THUMBNAIL button.
3
Turn the SEL/SET dial (page 9) to move
the cursor to the thumbnail for the clip
you want to play.
4
Press the SEL/SET dial.
Playback begins from the start of the selected
clip.
You can control playback by pressing the
following buttons.
SEL/SET dial:
Pauses playback.
Press again to return to normal playback.
Press left/right buttons:
Jumps to start of clip/start of next clip.
Press and hold left/right buttons:
Fast reverse/forward.
Returns to normal playback when you release
the button.
CANCEL/BACK button:
Stops playback, and returns to recording
standby mode.
Notes
• There may be momentary picture breakup or still
image display at the boundary between clips. You
cannot operate the camcorder during this period.
• When you select a clip in the thumbnail screen and
begin playback, there may be momentary picture
breakup at the start of the clip. To view the start of the
clip without breakup, put the camcorder into playback
mode, pause, then use the left button of the SEL/SET
dial to return to the start of the clip, and start playback
again.
• You can also control playback using the supplied
remote control.
52
- Quick Links:
- Playing Clips
Hide quick links:
Advertisement
Table of Contents
