Page 1
CANADA : http//biz.lgservice.com : http//www.lgservice.com : http//biz.lgservice.com PLASMA TV SERVICE MANUAL CHASSIS :PA-73E MODEL : 50PC5DC 50PC5DC-UC MODEL : 50PC5D 50PC5D-UC CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
An other abnormality exists that must be corrected before the receiver is returned to the customer. CANADA: LG Electronics Canada, Inc. 550 Matheson Boulevard East Mississauga, Ontario L4Z 4G3 : LG Customer Interactive Center P.O.Box 240007, 201 James Record Road Huntsville,...
DESCRIPTION OF CONTROLS FRONT PANEL INFORMATION Here shown may be somewhat different from your TV. Front Panel Controls Plasma TV Model Remote Control Sensor Power Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indica- tor blinks green and then illuminates green before the picture is displayed.
DESCRIPTION OF CONTROLS BACK PANEL INFORMATION Back Connection Panel Plasma TV Model AV IN 2 S-VIDEO Input Provides better picture quality than the video input. AUDIO Input VIDEO Input Connects the video signal from a video device. SERVICE VIDEO AUDIO RGB IN (PC) HDMI IN...
DESCRIPTION OF CONTROLS REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT TV INPUT Select the remote’s operating mode. Defaults to LG MODE POWER codes, refer to page 70 to reprogram. MODE VCR/DVD Control video cassette recorders or DVD players.
Page 7
DESCRIPTION OF CONTROLS POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: TV, AV1-2, Component 1-2, RGB-PC, HDMI1/DVI and HDMI2.
SPECIFICATIONS 42PC5D 50PC5D MODELS (42PC5D-UC) (50PC5D-UC) 41.3 x 30.2 x 12.2 inches 48.9 x 34.9 x 14.6 inches Including stand 1048.0 x 766.0 x 310.0 mm 1242.0 x 887.6 x 370.0 mm Dimensions 41.3 x 28.1 x 3.3 inches 48.9 x 32.6 x 3.5 inches (Width x Height x Depth) Excluding stand 1048.0 x 713.0 x 83.5 mm...
ADJUSTMENT INSTRUCTIONS 1. Application Object If you turn on a still screen more than 20 minutes (Especially These instructions are applied to all of the PDP TV, PA73E. Digital pattern(13 CH), Cross Hatch Pattern), an afterimage may occur in the black level part of the screen. 2.
Page 10
ADJUSTMENT INSTRUCTIONS (3) Click the first icon shown in fig.9. The window seen in fig.10 should appear. (3) Click the Send. (4) When you see (ISP COMPLETE) the download is complete. 3-4. Set Method (1) MCU Select: MTV512M64 (2) Option R/W Option: Auto Write(Verity) Jig Option: Myson Transmit Speed: Medium...
Page 11
ADJUSTMENT INSTRUCTIONS 4. USB S/W Download (Option) (5) Once the download is completed, remove the USB memory stick from the USB port. Press IN-START on the remote controller to check the upgraded S/W version at the 4-1. Overview top of the screen while the display is turned on. USB Download enables quick response to S/W upgrading and helps to configure the panel to the latest updates.
Page 12
ADJUSTMENT INSTRUCTIONS 5-3. Adjustment(42”/50”) Each PCB Assy must be checked by Check JIG Set before assembly. (Especially, be careful Power PCB Assy which can (1) Va Adjustment cause Damage to the PDP Module.) 1) Connect + terminal of D.M.M to Va pin of P812(50”: P805) and connect –...
Page 14
ADJUSTMENT INSTRUCTIONS 6-3. Adjustment 7-2. EDID DATA for PA-73E (1) Select Component1 as the input with 100% Horizontal Color Bar Pattern(HozTV31Bar) in 480i Mode [42PC5D-UC] (2) After receiving signal for at least 1 second, press the ADJ EDID for HDMI-1 (DDC (Display Data Channel) Data) Key on the Service R/C to enter the ‘Ez - Adjust’...
Page 16
ADJUSTMENT INSTRUCTIONS 8. Adjustment of White Balance [ Requirements for Automatic Adjustment 8-1. The Purpose and Principal of Color (1) The illuminance of surroundings 10 lux or less; preventing light in surroundings as much as Temperature Adjustment possible (1) Purpose: to reduce the difference in color temperature (2) The location of the Probe among modules 1) For PDP: place the color analyzer (CA-100, CA-100+,...
Page 17
ADJUSTMENT INSTRUCTIONS [ RS-232C Command [ Color temperature: Cool, Medium, Warm (Automatic Adjustment) [42PC5D-UC] & [50PC5D-UC] (1) When R Gain is fixed at 192, Control G Gain and B Gain by reducing them from 192. RS-232C COMMAND CENTER [CMD ID DATA] (DEFAULT)(Decimal) (Deci (2) When B Gain is fixed at 192,...
Page 18
ADJUSTMENT INSTRUCTIONS [ White Balanc High Level : 216gray [The standard coordinates and color temperature for CS-1000] Color Coordination ∆ uv Mode Temp Cool 0.276 0.283 11000K 0.0000 0.285 0.293 Medium 9300K 0.0000 Warm 0.314 0.324 6500K 0.0000 [The standard coordinates and color temperature for CA-100/100+ (CH 10)] Color Coordination ∆...
TROUBLESHOOTING GUIDE TV/CATV doesn’t display Could you measure voltage of TU4001 & IIC Check TU4001 Pin9(Video output) You should check power line lines? Can you see the normal signal? & IIC lines. Are they all normal? You should replace TUNER. Check the input(Pin63) of AV switch(IC5003).
Page 20
TROUBLESHOOTING GUIDE Video doesn’t display Check J5007 Pin3C J5007 may have problem. Replace this Jack. Can you see the normal waveform? Check the input(Pin1 or Pin8) of AV switch(IC5003). Pin1 is for video1,Pin8 is for After checking the Power of AV switch you should video 2.
Page 21
TROUBLESHOOTING GUIDE Component doesn’t display Check J5004,J5005. J5004,J5005 may have problem. Replace this Jack. Can you see the normal waveform? Check the input of Component After checking the input TR of component, you should switch(IC5001,IC5002). decide to replace component switch or not. Can you see the normal waveform? Check the output of Component After checking the Power of component switch you...
Page 22
TROUBLESHOOTING GUIDE RGB_PC doesn’t display Check input connect P7004. P7004 may have problem. Replace this Jack. Can you see the normal waveform? Check the input of Component switch(IC5002). After checking the input TR of RGBHV, you should Can you see the normal waveform? decide to replace these components or not.
Page 23
TROUBLESHOOTING GUIDE HDMI doesn’t display Check input connect P7007. P7007 may have problem. Replace this Jack. Can you see the normal waveform? After checking the Power of this chip, you should Check DDC communication lines(IC7013 Pin5,6) decide to replace this or not. After checking the Power of this chip, you should Check HDCP communication lines(IC7005 Pin5,6) decide to replace this or not.
Page 50
May, 2007 P/NO : MFL36737202 Printed in Korea CANADA: LG Electronics Canada, Inc. 550 Matheson Boulevard East Mississauga, Ontario L4Z 4G3 : LG Electronics Alabama, Inc. P.O.Box 240007, 201 James Record Road Bldg 3 Huntsville, AL 35824...