hit counter script
Panasonic SA-AKX36LMK Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Stereo System
  5. SA-AKX36LMK
  6. Service manual

Panasonic SA-AKX36LMK Service Manual

Cd stereo system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Please refer to the original service manual for:
CD Mechanism Unit , Order No. PSG1102001CE
Speaker system SB-AKX36LM-K, Order No. MEX1305006CE
Nota: El idioma original de este Manual de Servicio es en idioma inglés, sin embargo algunas notas
aquí mencionadas serán escritas en español para mejor descripción para Centros de Servicio de México.

TABLE OF CONTENTS

CD Stereo System
SA-AKX36LMK
Model No.
Product Color: (K)...Black Type
prevention
© Panasonic Corporation 2013. All rights reserved.
Unauthorized copying and distribution is a violation
of law.
MEX1305005CE
electrostatic
breakdown

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SA-AKX36LMK

Summary of Contents for Panasonic SA-AKX36LMK

  • Page 1: Table Of Contents

    2.3. Service caution based on Legal restrictions 6.2. Main Unit Key Button Operation 2.4. Handling Precautions for Traverse Unit 7 Installation Instructions 7.1. Speaker and A/C Connection © Panasonic Corporation 2013. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 8 Service Mode 8.1. Cold-Start 8.2. Doctor Mode Table 8.3. Reliability Test Mode (CD Mechanism Unit) 8.4. Self-Diagnostic Mode 8.5. Self-Diagnostic Error Code Table 8.6. Sales Demonstration Lock Function 9 Troubleshooting Guide 10 Disassembly and Assembly Instructions 10.1. Screw Types 10.2.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent X-RADIATION, shock, fire, or other hazards.

  • Page 4: Before Repair And Adjustment

    1.3. Before Repair and Adjustment Caution: DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent. Current consumption at AC 127 V, 60 Hz in FM Tuner at volume minimum mode should be ~ 500 mA. 1.4.

  • Page 5: Power Supply Using Smps

    1.5. Power Supply using SMPS This model uses SMPS Module to Pow e r up th e unit. Below is th e part number of th e SMPS Model. N 0 AB3G L 0 0001 Figure 1- 3...

  • Page 6: Safety Parts Information

    1.6. Safety Parts Information Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Exploded View & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.

  • Page 7: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).

  • Page 8: Precaution Of Laser Diode

    2.2. Precaution of Laser Diode Caution: This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wavelength: 790 nm (CD) Maximum output radiation power from pickup: 100 µW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings: 1.

  • Page 9: Service Caution Based On Legal Restrictions

    2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).

  • Page 10: Handling Precautions For Traverse Unit

    2.4. Handling Precautions for Traverse Unit The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit. Cautions to Be Taken in Handling the Optical Pickup Unit 2.4.1.

  • Page 11: Grounding For

    2.5. Grounding for electrostatic breakdown prevention • As for parts that use optical pick-up (laser diode), the optical pick-up is destroyed by the static electricity of the working environ- ment. Repair in the working environment that is grounded. 2.5.1. Worktable grounding •...

  • Page 12: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 13: Firmware Update Procedure

    3.2. Firmware Update Procedure Start Write encrypted UPD bin to CD-R Turn On main set Insert CD-R (with UPD bin) and close TOC reading "CHECKING" "NO PLAY" process end Writing starts: "0%" -> "20%" -> "40%" -> "60%" -> "80%" -> 100%" "GOOD"...

  • Page 14: Specifications

    4 Specifications Sección del amplificador Sección de USB Puerto USB Potencia de salida RMS en modo estéreo USB estándar USB 2,0 velocidad total Canal frontal (ambos canales controlados) 275 W por canal (3 ), 1 kHz, 30% THD Compatibilidad con formato de archivos de medios MP3 (*.mp3) Potencia total del modo estéreo RMS 550 W (30% THD)

  • Page 15: General/Introduction

    5 General/Introduction 5.1. Media Information...

  • Page 16: Location Of Controls And Components

    6 Location of Controls and Components 6.1. Remote Control Key Button Operation Interruptor de alimentación en espera/conectada Pulse este interruptor para cambiar del modo de alimentación conectada al modo de SLEEP PLAY/ alimentación en espera o viceversa. En el modo de alimentación en espera, la unidad AUTO OFF consume una pequeña cantidad de corriente.

  • Page 17: Main Unit Key Button Operation

    6.2. Main Unit Key Button Operation CONTROL – VOLUME MEMORY REC - ILLUMINATION ALBUM/TRACK LATIN MEMORY/ PRESET EQ MANUAL EQ RADIO/ TUNEMODE D.BASS EXT-IN USB REC OPEN CLOSE MUSIC PORT Seleccionar la opción Configurar el modo de edición para USB y memoria interna Botones directos de la lista de reproducción de la memoria interna Pulse para agregar una pista a la lista de reproducción correspondiente.

  • Page 18: Installation Instructions

    7 Installation Instructions 7.1. Speaker and A/C Connection Cómo realizar las conexiones Conecte los bafles. Conecte los cables de los bafles a las terminales del Conecte el cable de alimentación de sólo después mismo color. de haber hecho todas las demás conexiones. Rojo Corriente alterna = Negro...

  • Page 19: Service Mode

    8 Service Mode 8.1. Cold-Start Here is the procedure to carry out cold-start or initialize to shipping mode. 1. Unplug AC power cord 2. Press & hold [POWER] button 3. Plug AC power cord while [POWER] button being pressed FL Display will show “_ _ _ _ _ _ _ _” 4.

  • Page 20: Doctor Mode Table

    8.2. Doctor Mode Table 8.2.1. Doctor Mode Table 1 Item Key Operation FL Display Mode Name Description Front Key Doctor Mode To enter into Doctor Mode In CD Mode: 1. Press [ ] button on main unit follow by [4] and [7] on remote control.
  • Page 21 8.2.2. Doctor Mode Table 2 Item Key Operation FL Display Mode Name Description Front Key Volume Setting To check the volume setting of the In Doctor Mode: Check main unit. 1. Press [7], [8], [9] button on the remote control. Press [7]: VOL50 Volume Press [8]: VOL35...
  • Page 22 8.2.3. Doctor Mode Table 3 Item Key Operation FL Display Mode Name Description Front Key To display result of In Doctor Mode : Self- Adjustment self-adjustment for CD. 1. Press [10] [4] button Test on the remote control. Display of auto adjustment result Reference table: ERROR Code...

  • Page 23: Reliability Test Mode (Cd Mechanism Unit)

    8.3. Reliability Test Mode (CD Mechanism Unit) Below is the process flow chart of the aging test for the CD Mechanism Unit . OPEN First Track Operation Access OPEN wait First Track for 1 s Play 5 s CLOSE Count up Last Track Operation Access...

  • Page 24: Self-Diagnostic Mode

    8.4. Self-Diagnostic Mode Item Key Operation FL Display Mode Name Description Front Key Self Diagnostic To enter into self diagnostic checking Step 1: Select CD mode Mode (Ensure no disc is inserted). Step 2: Press & hold [ ] button follow by [ ] on main unit for 2 seconds.

  • Page 25: Sales Demonstration Lock Function

    8.5.2. CD Mechanism Error Code Table (CD Mechanism Unit) Error Code Diagnostic Contents Description of error Automatic FL Display Remarks CD H15 CD Open Abnormal During operation Press [ ] on main unit for POS_SW_R On fail to be next error. detected with 4 sec.

  • Page 26: Troubleshooting Guide

    9 Troubleshooting Guide "Contents for this section is not available at time of issue"...

  • Page 27: Disassembly And Assembly Instructions

    10 Disassembly and Assembly Instructions • Illustration is based on SA-AKX36 Caution Note: • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service manual) •...

  • Page 28: Disassembly Flow Chart

    10.2. Disassembly Flow Chart 10.4.Top Cabinet 10.16. Fan Unit 10.10. Rear Panel 10.5. Front panel Unit 10.6. Panel P.C.B., 10.11. Main P.C.B. LED P.C.B. and Mic P.C.B. 10.7. Remote Sensor 10.12.Digital Amplifier P.C.B. IC (IC6000) 10.13.SMPS Module 10.8. USB P.C.B. 10.9.

  • Page 29: Main Components And P.c.b. Locations

    10.3. Main Components and P.C.B. Locations...

  • Page 30: Disassembly Of Top Cabinet

    10.4. Disassembly of Top Cabinet Step 4 Slightly lift up both sides of Top Cabinet in an outward direction as shown. Step 1 Remove 2 screws on each side. Step 5 Remove the Top Cabinet. Step 2 Remove 5 screws. Step 3 Slightly pull both side of Top Cabinet outwards as arrow shown.

  • Page 31: Disassembly Of Front Panel Unit

    10.5. Disassembly of Front Panel Step 3 Release tab at the left side of Front Panel Unit. Unit • Refer to “Disassembly of Top Cabinet”. Step 1 Detach 5P Cable at the connector (CN2002) on Main P.C.B.. Step 2 Detach 30P FFC at the connector (CN2000) on Main P.C.B..

  • Page 32: Disassembly Of Panel P.c.b., Led P.c.b. And Mic P.c.b

    Step 4 Release tabs at bottom. Step 6 Remove the Front Panel Unit as arrow shown. 10.6. Disassembly of Panel P.C.B., LED P.C.B. and Mic P.C.B. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Front Panel Unit”. Step 5 Release tab at the right side of Front Panel Unit.
  • Page 33 Step 3 Remove 7 screws. Step 5 Lift up the Panel P.C.B. and LED P.C.B. from Front Panel Unit. Step 4 Release catches by following the sequences (1-8). Caution: During assembling, ensure that LED P.C.B. is properly insert to Front Panel Unit.

  • Page 34: Disassembly Of Remote Sensor P.c.b

    Caution: During assembling, ensure that Panel P.C.B. is Caution: During assembling, ensure that Mic P.C.B. is seated properly through the located & fully catched. seated properly through the located & fully catched. 10.7. Disassembly of Remote Sensor P.C.B. • Refer to “Disassembly of Top Cabinet”. •...

  • Page 35: Disassembly Of Usb P.c.b

    10.8. Disassembly of USB P.C.B. 10.9. Disassembly of CD Lid • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Front Panel Unit”. • Refer to “Disassembly of Front Panel Unit”. Step 1 Remove 1 screw.

  • Page 36: Disassembly Of Rear Panel

    10.10. Disassembly of Rear Panel Step 5 Lift up Inner Chassis Unit to release the catch between the Inner Chassis Unit and the Rear Panel. Refer to “Disassembly of Top Cabinet”. Step 1 Remove 9 screws. Step 6 Release 2 tabs. Step 7 Remove Rear Panel.

  • Page 37: Disassembly Of Main P.c.b

    10.11. Disassembly of Main P.C.B. Step 8 Remove the Main P.C.B.. Caution: During assembling, ensure that Main P.C.B. is • Refer to “Disassembly of Top Cabinet”. seated properly through the located & fully guided. • Refer to “Disassembly of Rear Panel”. Step 1 Detach 5P Cable at the connector (CN2002) on Main P.C.B..

  • Page 38: Disassembly Of Digital Amplifier Ic (Ic6000)

    10.12. Disassembly of Digital Ampli- Step 4 Desolder the pins of the Digital Amplifier IC (IC6000). Step 5 Remove the Digital Amplifier IC (IC6000). fier IC (IC6000) • Refer to “Disassembly of Main P.C.B.”. 10.12.1. Disassembly of Digital Amplifier IC (IC6000) Caution: Handle the Main P.C.B.

  • Page 39: Disassembly Of Smps Module

    Step 3 Fix Heatsink spacers onto Main Heatsink.. 10.13. Disassembly of SMPS Module Caotion: Ensure that the Heatsink Spacers are properly and Voltage Selector P.C.B. located and seated flatly onto Main Heatsink. Step 4 Apply grease to the Main Heatsink as indicate in the dia- •...

  • Page 40: Disassembly Of Cd Mechanism Unit

    10.14. Disassembly of CD Mecha- Step 3 Detach 10P FFC at a connector (CN8251) on Main nism Unit P.C.B.. Refer to “Disassembly of Top Cabinet”. Step 4 Detach 24P FFC at a connector (FP8201) on Main Refer to “Disassembly of Front Panel Unit”. P.C.B..

  • Page 41: Disassembly Of Cd Interface P.c.b

    Step 8 Release 2 catches. Step 10 Remove 2 screws. Step 9 Lift up and remove the Inner Chassis Unit. Step 11 Remove the CD Mechanism Unit. 10.15. Disassembly of CD Interface P.C.B. • Refer to “Disassembly of Top Cabinet”. Caution: During assembling, ensure that Inner Chassis Unit is catched onto Rear Panel properly.

  • Page 42: Disassembly Of Fan Unit

    10.16. Disassembly of Fan Unit • Refer to “Disassembly of Top Cabinet”. Step 1 Remove 1 screw. Step 2 Detach 2P Wire at a connector (CN1001) on the Main P.C.B.. Step 3 Release 1 catch. Step 4 Remove the Fan Unit. Caution: During assembling, ensure that Fan Unit is catched onto Rear Panel properly.

  • Page 43: Service Position

    11 Service Position Note: For description of the disassembly procedures, see 11.2. Checking of Main P.C.B. (Side the Section 10. 11.1. Checking of Panel P.C.B., LED Step 1 Remove Top Cabinet. P.C.B. and Mic P.C.B. Step 2 Remove Rear Panel. Step 3 Remove Main P.C.B..

  • Page 44: Checking Of Main P.c.b. (Side A)

    Step 6 Attach 13P Cable at a connector (CON2) on the SMPS 11.3. Checking of Main P.C.B. (Side Module. Step 7 Attach 30P FFC at a connector (CN2000) on the Main P.C.B.. Step 1 Remove Top Cabinet. Step 8 Attach 10P FFC at a connector (CN8251) on the Main Step 2 Remove Front Panel Unit.

  • Page 45: Block Diagram

    12 Block Diagram 12.1. Servo & System Control : USB SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE MAIN P.C.B. IC8001 MN6627992AB SERVO PROCESSOR USB P.C.B. IC7704 C3ABMY000027 CN6400 16M SDRAM USB PORT 1 VBUS TC - 1 A0 ~ A11 CN2002...
  • Page 46 : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : USB SIGNAL LINE MN101EF16ZXW Este material se encuentra sin programar, debe ser programado. IC2006 MAIN P.C.B. RFKWMAKX36LM grabado del modelo base AKX36PN-K PANEL P.C.B. MEMORY LED P.C.B. MICROPROCESSOR QR6001, QR6003,QR6004 LED DIMMER...

  • Page 47: Ic Terminal Chart

    12.2. IC Terminal Chart IC7704 IC8001 16M SDRAM SERVO PROCESSOR SIGNAL NAME PORT NAME PIN NO PIN NO PORT NAME IC7704 IC8001 16M SDRAM SERVO PROCESSOR SIGNAL NAME PORT NAME PIN NO PIN NO PORT NAME DQ0 / DQ15 2 / 49 DQ1 / DQ14 3 / 48 DQ2 / DQ13...

  • Page 48: Audio

    12.3. Audio : CD AUDIO INPUT SIGNAL LINE : AUX/TUNER/MUSIC PORT AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : AM SIGNAL LINE : FM SIGNAL LINE MAIN P.C.B. IC6100 C0JBAR000367 AUDIO SELECTOR ANA SEL2 ANA SEL2 9 A(LSB) 10 B(MSB) QR6100 FROM/TO...

  • Page 49: Power Supply

    12.4. Power Supply MAIN P.C.B. SMPS MODULE PW +32.5V +32.5V PW SYS3R3V +3.3V CN1000* SYS3V3 PW SYS3R3V PW +6V PW +5V PW +5V IC2030 C0DBZYY00311 HIGH SIDE SWITCH PW +5V VBUS VBUS 1 VIN VOUT IC1003 FROM/TO C0DBAYY01594 SERVO & SYSTEM CONTROL +6V DC-DC AC INLET CONVERTER...
  • Page 50 MAIN P.C.B. PW 6V IC1000 C0DBGYY03909 +3.3V VOLTAGE REGULATOR PW 3V3,PW 3R3V DIG,PW 3R3V DAC,PW 3R3V CD PW +6V PW 6V PW 3V3 3 VIN VOUT 2 +3.3V D1001 D1002 DC DET PWR DC DET PWR QR1000 DC DETECT Q1000 PW 16V +12V VOLTAGE PW 12V...

  • Page 51: Wiring Connection Diagram

    13 Wiring Connection Diagram TO SMPS MODULE P.C.B. JK6000 CN6001 CN1000* TO SPEAKERS CN6002 JK6002 MAIN P.C.B. VR6100 (SIDE B) AUX IN PANEL P.C.B. (SOLDER SIDE) VOLUME CN2000 CN6003 JK51 FM ANT CN2001 JK52 CN2002 FP9003 AM ANT FP8201 CN8251 T6000 (SWITCHING TRANSFORMER) CN1001...

  • Page 52: Schematic Diagram

    14 Schematic Diagram 14.1. Schematic Diagram Notes • This schematic diagram may be modified at any time with the development of new technology. Notes: S6000: Playlist 2 switch. S6001: Playlist 3 switch. S6002: Playlist 4 switch. S6003: Playlist 1 switch. S6004: Playlist 5 switch.

  • Page 53: Main (Cd Servo/Micon/Damp) Circuit

    14.2. MAIN (CD Servo/Micon/Damp) Circuit SCHEMATIC DIAGRAM - 1 MAIN (CD SERVO) CIRCUIT : +B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : USB SIGNAL LINE BOOT_MODE_DET LB8402 R8032 J0JHC0000045 C8076 PW_3V3 R8031 C8050 30 29 21 20 19 16 15...
  • Page 54 SCHEMATIC DIAGRAM - 2 MAIN (CD SERVO) CIRCUIT : +B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : USB SIGNAL LINE FP8201 R8201 R8202 CD/DVD SW R8203 R8204 R8205 TO OPTICAL PICKUP UNIT PD_GND LB8204 J0JBC0000134 VREF...
  • Page 55 SCHEMATIC DIAGRAM - 3 MAIN (CD SERVO) CIRCUIT : +B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : USB SIGNAL LINE C8509 C8513 C8508 LB8501 J0JHC0000045 77 76 75 74 67 66 63 62 60 59 53 52 51 50...
  • Page 56 SCHEMATIC DIAGRAM - 4 : +B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : FM SIGNAL LINE MAIN (MICON) CIRCUIT : -B SIGNAL LINE : AUX/TUNER/MUSIC PORT AUDIO INPUT SIGNAL LINE : AM SIGNAL LINE : USB SIGNAL LINE CD: MAIN (CD SERVO): SCHEMATIC DIAGRAM - 1 ~ 3 DA: MAIN (DAMP): SCHEMATIC DIAGRAM - 8...
  • Page 57 SCHEMATIC DIAGRAM - 5 : +B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : FM SIGNAL LINE MAIN (MICON) CIRCUIT : -B SIGNAL LINE : AUX/TUNER/MUSIC PORT AUDIO INPUT SIGNAL LINE : AM SIGNAL LINE : USB SIGNAL LINE R8041 PW_3V3...
  • Page 58 SCHEMATIC DIAGRAM - 6 : +B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : FM SIGNAL LINE MAIN (MICON) CIRCUIT : -B SIGNAL LINE : AUX/TUNER/MUSIC PORT AUDIO INPUT SIGNAL LINE : AM SIGNAL LINE : USB SIGNAL LINE TO MAIN (MICON) CIRCUIT (1/4)
  • Page 59 SCHEMATIC DIAGRAM - 7 : +B SIGNAL LINE : CD AUDIO INPUT SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE : FM SIGNAL LINE MAIN (MICON) CIRCUIT : -B SIGNAL LINE : AUX/TUNER/MUSIC PORT AUDIO INPUT SIGNAL LINE : AM SIGNAL LINE : USB SIGNAL LINE TO MAIN (MICON) CIRCUIT (2/4)
  • Page 60 SCHEMATIC DIAGRAM - 8 MAIN (DAMP) CIRCUIT : +B SIGNAL LINE : AUDIO OUTPUT SIGNAL LINE HEATSINK* IC6000 R6050 C1AB00003986 R6007 POWER AMPLIFIER C6005 C6024 0.033 R6300 C6018 GVDD_AB BST_A C6019 C6028 0.033 R6301 BST_B R6058 R6046 R6068 C6069 OC_ADJ C6045 C6049 100K...

  • Page 61: Panel Circuit

    14.3. Panel Circuit SCHEMATIC DIAGRAM - 9 PANEL CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE : MUSIC PORT AUDIO INPUT SIGNAL LINE FL6000 A2BB00000184 FL DISPLAY C6002 C6018 1000P C6016 1000P C6015 1000P C6014 1000P C6013 1000P C6011 1000P C6009 1000P...
  • Page 62 SCHEMATIC DIAGRAM - 10 PANEL CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE : MUSIC PORT AUDIO INPUT SIGNAL LINE CN6001 GREEN_LED LED_GREEN RED_LED LED_RED VP_DET FL_GND DGND PW_+15V +15V MPORT_R MPORT_R MPORT_GND MPORT_GND MPORT_L MPORT_L MPORT_SW MPORT_SW JOG_ROTA JOG_ROTA JOG_ROTB JOG_ROTB...

  • Page 63: Usb, Music Port, Memory Led, Remote Sensor & Cd Interface Circuit

    14.4. USB, Music Port, Memory LED, Remote Sensor & CD Interface Circuit SCHEMATIC DIAGRAM - 11 USB CIRCUIT MUSIC PORT CIRCUIT : +B SIGNAL LINE : USB SIGNAL LINE : MUSIC PORT AUDIO INPUT SIGNAL LINE CN6400 ZJ6400* VBUS VBUS JK6301 MAIN (MICON) USB PORT...

  • Page 64: Printed Circuit Board

    15 Printed Circuit Board 15.1. Main P.C.B. MAIN P.C.B. (RD-DAK116-PX) C1023 D6501 C6519 C6510 C6521 C6060 C6516 C6048 R6062 C6047 C1005 C6070 C6059 R6061 R2055 R6521 C6045 R6520 R6060 C6049 C2051 R2300 R6501 R6069 R6068 C6062 C6061 R6058 R6504 R2309 C2300 R6506 QR1000...
  • Page 65 MAIN P.C.B. (RD-DAK116-PX) L6301 JK6000 HEATSINK Q1000 Q6300 R6132 CN1000* 1-R+ (TO SMPS MODULE P.C.B.) C6027 R6057 Q6002 Q6007 R1005 2-R- R1008 R6055 TO SPEAKERS C6025 R6011 Q6001 C6068 C6030 R1016 3-L+ C6040 R6070 IC1000 L1000 IC1003 C1019 C6513 C6044 R1042 C6511 IC6000...
  • Page 66 PAVCCZ Oracle report PISTA MAIN DE SINGAPORE Ref. No. Part No. Name & Description Ref. No. Part No. Name & Description RD-DAK116-PX P.C.B. MAIN pista completa. Uso de los Centros de Servicio R6502 D0GB472JA065 SURFACE MOUNTING MULTILAYER CERAMIC CAPA REP4902K AKX36LM MAIN REP BLOCK R6505 D0GB472JA065...
  • Page 67 PAVCCZ Oracle report Ref. No. Part No. Name & Description Ref. No. Part No. Name & Description SURFACE MOUNTING MULTILAYER CERAMIC CAPACITORS , C6047 F1H1H102B047 C6527 F1J1A106A043 Surface mounting multilayer ceramic capa RECTANGULAR TYPE (1608 TYPE) SURFACE MOUNTING MULTILAYER CERAMIC CAPACITORS , C6048 F1H1H102B047 C8065...
  • Page 68 PAVCCZ Oracle report Ref. No. Part No. Name & Description Ref. No. Part No. Name & Description SURFACE MOUNTING MULTILAYER CERAMIC CAPACITORS , RECTANGULAR C8506 F1G1A1040006 CHIP ERAMIC CAPACITOR F1H1H3R0B050 TYPE (1608 TYPE) C8507 F1G1A1040006 CHIP ERAMIC CAPACITOR C6504 F1H1H472A219 CHIP CAPACITOR C8508 F1G1A1040006...
  • Page 69 PAVCCZ Oracle report Ref. No. Part No. Name & Description Ref. No. Part No. Name & Description R6103 D0GB102JA065 SURFACE MOUNTING OTHER FIXED RESISTORS D0GBR00J0004 SURFACE MOUNTING FIXED RESISTORS , RECTANGULAR TYPE R8252 D0GB102JA065 SURFACE MOUNTING OTHER FIXED RESISTORS LB8203 D0GBR00J0004 SURFACE MOUNTING FIXED RESISTORS , RECTANGULAR TYPE R8263...
  • Page 70 PAVCCZ Oracle report Ref. No. Part No. Name & Description Ref. No. Part No. Name & Description R2306 D0GB101JA065 Surface mounting fixed resistors , recta RPQ3003 PARTITION PAD A R2307 D0GB101JA065 Surface mounting fixed resistors , recta RPQ3004 PARTITION PAD B R2308 D0GB101JA065 Surface mounting fixed resistors , recta...

  • Page 71: Panel, Usb, Music Port & Memory Led

    15.2. Panel, USB, Music Port & Memory LED P.C.B. PANEL P.C.B. (RAIM13X363A) USB P.C.B. (RAIM13X363A) S6203 (POWER) CN6400 S6204 S6207 (MEMORY (USB R6200 REC/PAUSE) S6200 REC/PAUSE) S6202 S6206 (LATIN (MANUAL EQ) (D.BASS) R6206 USB PORT PRESET EQ) W1004 CN6001 W1005 R6203 W1122 W1116...

  • Page 72: Remote Sensor & Cd Interface P.c.b

    15.3. Remote Sensor & CD Interface P.C.B. REMOTE SENSOR P.C.B. (RAIM13X363A) CD INTERFACE P.C.B. (RAIM13X363A) M7302* (SPINDLE MOTOR) CN6500 IR6500 S7201 (RESET) SENSOR CN7002 CN7001 M7301* TO LOADING P.C.B. (TRAVERSE (CD MECHANISM MOTOR) UNIT BRS11C) 3556A 3556A NOTE: " * " REF IS FOR INDICATION ONLY SA-AKX36LM-K REMOTE SENSOR / CD INTERFACE P.C.B.

  • Page 73: Voltage & Waveform Chart

    Z16 Appendix Information of Schematic Diagram Voltage & Waveform Chart 16.1. Note: • Indication Voltage Values are in standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in voltage values, depending on the internal impedance of the DC circuit tester. •...
  • Page 74 16.1.2. Main P.C.B. (2/5) REF NO. IC2007 MODE CD PLAY STANDBY REF NO. IC2030 MODE CD PLAY STANDBY REF NO. IC6000 MODE CD PLAY 12.1 12.2 STANDBY 12.1 12.2 IC6000 REF NO. MODE CD PLAY 12.1 27.9 27.0 16.4 16.4 32.0 32.0 32.0 16.4 16.4 32.0 32.0 32.0 16.3 16.4 STANDBY 12.1 27.9 27.0...
  • Page 75 16.1.3. Main P.C.B. (3/5) REF NO. IC7704 MODE CD PLAY STANDBY IC7704 REF NO. MODE CD PLAY STANDBY REF NO. IC8001 MODE CD PLAY STANDBY REF NO. IC8001 MODE CD PLAY STANDBY REF NO. IC8001 MODE CD PLAY STANDBY REF NO. IC8001 MODE CD PLAY...
  • Page 76 16.1.4. Main P.C.B. (4/5) REF NO. IC8251 MODE CD PLAY STANDBY REF NO. IC8251 MODE CD PLAY STANDBY REF NO. IC8401 MODE CD PLAY STANDBY REF NO. IC8501 MODE CD PLAY STANDBY REF NO. IC8501 MODE CD PLAY STANDBY REF NO. IC8501 MODE CD PLAY...
  • Page 77 16.1.5. Main P.C.B. (5/5) REF NO. IC8501 MODE CD PLAY STANDBY REF NO. Q1000 Q1001 Q1002 Q1003 Q1004 MODE CD PLAY 12.4 12.4 12.0 16.0 16.0 12.0 STANDBY 12.4 12.4 12.0 16.0 16.0 12.0 REF NO. Q1005 Q2001 Q2500 Q6001 Q6002 MODE CD PLAY...
  • Page 78 16.1.7. Waveform Table 4Vp-p(50nsec/div) 3.2Vp-p(50nsec/div) 1.8Vp-p(10usec/div) 2.8Vp-p(10usec/div) 2.4Vp-p(1usec/div) 32Vp-p(1usec/div) 3.4Vp-p(500nsec/div) 3.2Vp-p(10usec/div) 2.4Vp-p(1usec/div) 2.5Vp-p(200usec/div) 3.4Vp-p(100nsec/div)

  • Page 79: Exploded View And Replacement Parts List

    17 Exploded View and Replacement Parts List 17.1. Exploded View and Mechanical replacement Part List 17.1.1. Cabinet Parts Location *ZJ6700 FL6000 (MEMORY LED P.C.B.) CN6003 (PANEL P.C.B.) CN6002 CN6500 IR6500 VR6200 (REMOTE SENSOR P.C.B.) T6000 CN6001 VR6100 *ZJ6000 *ZJ6400 (USB P.C.B.) (MUSIC PORT P.C.B.) *ZJ6300 CN6400...
  • Page 80 JK6002 JK52 JK6000 *D-AMP HEATSINK UNIT JK51 CN1001 FP9003 CN8251 CN2002 (BRS11C) CN2001 (MAIN P.C.B.) CN2000 FP8201 *CN1000 (SMPS MODULE) CN7002 (CD INTERFACE P.C.B.) CN7001 S7201 SA-AKX36LM-K NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY. CABINET DRAWINGS...
  • Page 81 17.1.2. Packaging ACCESSORIES BAG REMOTE CONTROL N2QAYB000850 SA-AKX36 AC CORD K2CB2CB00022 OI BOOK RQTM0197 FM INDOOR ANTENNA RSAX0002 SB-AKX36 AM LOOP ANTENNA N1DYYYY00011 F R O N T R P G M 0 2 8 2 POLYFOAM (TOP) RPNM0262T SC-AKX36LM-K POLYFOAM (BOTTOM) RPNM0262B PACKAGING DRAWINGS...
  • Page 82 17.1.3. Mechanical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description RHD30007-K2J SCREW CABINET CHASSIS RHD30111-31 SCREW RHD30119-S SCREW L6FALEFH0030 FAN UNIT RHDX031008 SCREW REE1730 10P FFC (MAIN-CD RMNV0079-1 FL HOLDER INTERFACE)
  • Page 83 Safety Ref. Part No. Part Name & Qty Remarks Description RGQ0744-W VOLUME LIGHT SHEET RKW1025-QL FL WINDOW RGU2848-KL POWER BUTTON TRAVERSE DECK RD-DDL106-PX BRS1.1C LOADER U RAE1036Z-V TRAVERSE ASS'Y XTN2+6GFJ SCREW PACKING MATERI- RPGM0282 PACKING CASE RPNM0262T/B POLYFOAM RPFX0198-1 MIRAMAT ACCESSORIES N2QAYB000850 REMOTE CONTROL...

  • Page 84: Electrical Replacement Part List

    17.2. Electrical Replacement Part List...
  • Page 85 Safety Ref. No. Part No. Name & Description Safety Ref. No. Part No. Name & Description RAIM13X363A CONJUNTO PANEL Pista con componentes para servicio S6103 EVQ21405RJ TACK SWITCH REPM13X363A CONJUNTO MANUAL S6104 EVQ21405RJ TACK SWITCH CN6001 K1MN30B00046 CONECTOR S6105 EVQ21405RJ TACK SWITCH CN6002 K1KA04A00553...
  • Page 86 W1116 ERJ3GEY0R00V CHIP JUMPER W1117 ERJ3GEY0R00V CHIP JUMPER W1118 ERJ6GEY0R00V CHIP JUMPER W1119 ERJ6GEY0R00V CHIP JUMPER W1120 ERJ8GEY0R00V CHIP JUMPER W1121 ERJ8GEY0R00V CHIP JUMPER W1122 ERJ8GEY0R00V CHIP JUMPER W1123 ERJ6GEY0R00V CHIP JUMPER W1124 ERJ8GEY0R00V CHIP JUMPER C6008 F1H1H331B052 CAPACITOR SMT C6010 F1H1H331B052 CAPACITOR SMT...

This manual is also suitable for:

Sb-akx36Sa-akx36

Table of Contents