Table of Contents
Advertisement
24
EN
Basic Recording
Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (
pg. 25) or timer recording (
the recording will resume automatically when power is
restored to the recorder unless the recorder's memory backup
has expired.
NOTE:
If a power outage exceed the recorder's memory backup
time, Recording Resume Function does not work.
A
Insert a cassette with the record safety tab intact.
The recorder checks the tape information for Programme
Navigation. For details, refer to "Navigation" (
B
Press PR +/– or the number keys. Or push the JOG dial
and turn it to the left or right to select the channel you
wish to record.
C
Press SP/LP/EP (
front display panel or TV screen. Press SP/LP/EP (
again to change the setting while the tape speed is
displayed on the TV screen.
In EP mode, the recording time is extended three times.
If you record a programme in EP mode on this recorder, it is
recommended to play back the EP-recorded tape on this
recorder.
It is not possible to select EP mode if "COLOUR SYSTEM" is
set to "MESECAM"
D
Press and hold
press
If "O.S.D." is set to "ON" (
screen while an index code is being marked.
When "DIRECT REC" is set to "ON" (
button just after pressing
the remote control), the recorder may not function properly.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
If "DIRECT REC" is set to "ON", the programme that appears
on the TV screen will be recorded (
E
Press
You can select channel during the Record Pause mode.
F
Press
Then press
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
pg. 28, 30, 32),
Load a cassette.
Choose a programme.
Set the tape speed.
). The current setting appears on the
p
. (
pg. 52
Start recording.
and press
7
4
on the recorder.
7
pg. 49), "MARK" blinks on the
on the recorder (or
7
pg. 27)
Pause/Resume recording.
. Press
to resume recording.
9
4
Stop recording.
on the remote control or
8
to remove the cassette.
0
Record safety tab
RECORDING
pg. 36).
p
)
on the remote control, or
50), if you press any
and
7
4
pg. 50).
on the recorder.
0
)
on
Hide quick links:
Advertisement
Table of Contents
