Table of Contents
Advertisement
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press
or to select Reset.
2
Press OK.
3
A confi rmation message will appear. Press or
to select Yes, and then press OK.
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
1
From the PICTURE menu, press or to
select Active Backlight Control.
2
Press or to select On or Off .
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
1
Press MENU, and then press or to display
the SOUND menu.
SOUND
MTS
Dual
Balance
Advanced Sound Settings
Audio Distortion Control
TV Mounting
Dynamic Range Control
Audio Level Offset
2
Press or to select MTS, and then press
or to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode to
Mono.
Noise will be reduced and reception may improve.
NOTE:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to Auto, then press s to switch to e
Mono (monaural).
Using the TV's features
Auto
Dual 1
0
On
Stand
Off
0
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
1
From the SOUND menu, press or to select
Dual.
2
Press or to select Dual 1 or Dual 2.
NOTE:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV
is turned off .
Selecting the stereo programmes
1
When a stereo programme is received,
d Stereo appears.
4
ABCD
Press s to select the stereo/monaural mode.
2
d Stereo and e Mono appear cyclically on
the screen.
Selecting the bilingual programmes
1
When a bilingual programme is received,
j Dual appears.
2
Press s to select the sound to be heard. The
sound diff ers according to the transmission
system: NICAM or German stereo/bilingual
broadcast.
Display
NICAM
j Dual 1
Sub I sound
J Dual 2
Sub II sound
e Mono
Main sound
NOTE:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the e Mono 2
mode will mitigate the problem.
1
When a monaural programme is received, e
Mono appears.
Stereo
Sound to be heard
German stereo/
bilingual broadcast
Main sound
Sub sound
—
21
Hide quick links:
Advertisement
Table of Contents
