hit counter script
Epson EB-595Wi User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EB-595Wi
  6. User manual

Epson EB-595Wi User Manual

Hide thumbs Also See for EB-595Wi:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
User's Guide
http://www.pureglare.com.au

Advertisement

Table of Contents
loading

Related Manuals for Epson EB-595Wi

Summary of Contents for Epson EB-595Wi

  • Page 1 User’s Guide http://www.pureglare.com.au...

  • Page 2: Notations Used In This Guide

    Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. The indications and their meaning are as follows. Make sure you understand them properly before reading the guide. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

  • Page 3: Table Of Contents

    Touch Unit (EB-595Wi only) ........
  • Page 4 Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) ..104 Using Your Finger for Interactive Touch Operations (EB-595Wi Saving a User's Logo ......... . . 106 only) .
  • Page 5 Network Menu ..........136 Problems with the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only) ..161 Notes on Operating the Network Menu .
  • Page 6 Screen Size and Projection Distance ......185 Cannnot Adjust the Angle of Touch Unit (EB-595Wi only) ....165 Projection Distance (for EB-595Wi/EB-585Wi/EB-585W/EB-575Wi/EB-575W) .

  • Page 7: Introduction

    Introduction This chapter explains the projector's features and the part names. http://www.pureglare.com.au...

  • Page 8: Projector Features

    Connecting to a Network and Projecting Images from the Computer's Screen You can perform the following operations using EasyMP Network Projection and EasyMP Multi PC Projection found on the supplied EPSON Projector Software CD-ROM. • Sharing the projector over a network...

  • Page 9: Enhanced Security Functions

    • Projecting multiple computer screens at the same time • Projecting images from portable devices over a network By using EasyMP Multi PC Projection, you If Epson iProjection is installed on your can project up to four screens at the same time smartphone or tablet device, you can from a computer on the network, or from wirelessly project data from the device.
  • Page 10 Projector Features "Optional Accessories" p.184 http://www.pureglare.com.au...

  • Page 11: Part Names And Functions

    Part Names and Functions Name Function Front/Side Exhaust vent for air used to cool the projector internally. Air exhaust vent Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent.

  • Page 12: Top/Side

    Function Top/Side Receives signals from the interactive pen. Easy Interactive Function receiver s "Using the Interactive Features (EB-595Wi/EB-585Wi/ (EB-595Wi/EB-585Wi/EB-575Wi only)" p.64 EB-575Wi only) Detects obstacles that are interfering with the projection Obstacle sensor area. s "Cleaning the Obstacle Sensor" p.171 Receives signals from the remote control.

  • Page 13: Interface

    Mouse Pointer (Wireless Mouse)" p.104 • Connects the projector to a computer via the supplied USB cable to use the interactive pen as a mouse (EB-595Wi/EB-585Wi/EB-575Wi only). s "Controlling Computer Features from a Projected Screen (Computer Interactive Mode)" p.68 Connects a LAN cable to connect to a network.

  • Page 14: Base

    EB-575Wi only) connect the optional remote control cable set (ELPKC28) to the projectors. When the cable set is connected, the interactive pen operates smoothly. s "Connecting Multiple Projectors (EB-595Wi/ EB-585Wi/EB-575Wi only)" p.42 Connects the power cord to the projector. Power inlet s "Getting Ready to Project"...

  • Page 15: Attaching The Feet (Only Models With Feet Supplied)

    Part Names and Functions Name Function Pass a commercially available wire lock through here and Security cable installation point lock it in place. Do not pass drop-prevention wires through here when mounting the projector on a wall or suspending it from a ceiling.

  • Page 16: Control Panel

    Part Names and Functions Name Function Control Panel • Performs keystone correction. [w][v] button s "H/V-Keystone" p.52 • If pressed when the Configuration menu or the Help screen is displayed, these buttons select menu items and setting values. s "Using the Configuration Menu" p.125 s "Using the Help"...

  • Page 17: Remote Control

    Part Names and Functions Name Function Remote Control Turns the projector power on or off. [Power] button s "Getting Ready to Project" p.45 Each time you press the button, the input changes between [Computer] button images from the Computer1 port and the Computer2 port.
  • Page 18 "Settings Menu" p.131 Pauses or resumes image playback. [Freeze] button The following item is assigned by default. • For EB-595Wi/EB-585Wi/EB-575Wi: Auto s "Freezing the Image (Freeze)" p.102 Calibration [a] Decreases the volume. [Volume] buttons • For EB-585W/EB-580/EB-575W/EB-570: Power [a][b] [b] Increases the volume.

  • Page 19: Replacing The Remote Control Batteries

    [Pen Mode] button Changes between operating the computer or drawing Safety Instructions using the interactive pen. s "Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only)" p.64 Remove the battery cover. Each time the button is pressed, the color mode changes. [Color Mode] button While pushing the battery cover catch, lift the cover up.

  • Page 20: Remote Control Operating Range

    If the batteries are not used correctly, they could explode or leak causing a fire, injury, or damage to the product. Interactive Pen (EB-595Wi/EB-585Wi/EB-575Wi Reattach the battery cover. only) Press the battery cover until it clicks into place.

  • Page 21: Replacing The Battery For The Interactive Pen

    • Hold the pen close to the projected screen, and press to use. Replacing the Battery for the Interactive Pen s "Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only)" p.64 When you press the button, the battery light on the interactive pen lights or s "Optional Accessories"...

  • Page 22: Replacing The Tip Of The Interactive Pen

    Part Names and Functions Remove the battery cover. Replace the battery cover. While pushing the battery cover catch, lift the cover up. Press the battery cover until it clicks into place. Replace the old battery with a new battery. Replacing the Tip of the Interactive Pen Slide the batteries in negative side first.

  • Page 23: Pen Tray (Eb-595Wi/Eb-585Wi/Eb-575Wi Only)

    Part Names and Functions Pen Tray (EB-595Wi/EB-585Wi/EB-575Wi only) Touch Unit (EB-595Wi only) Front When the dial cover is not attached Name Function Attach the pen tray to a whiteboard or wall. Name Function Fixing points Remove to use the adjustment dials.

  • Page 24: Rear

    Attention • Do not connect the Touch Unit to any devices except for EB-595Wi. The device could malfunction, or laser light could leak beyond the limit. • Make sure you use the supplied Touch Unit connection cable. Operations are not possible with a commercially available cable.

  • Page 25: Preparing The Projector

    Preparing the Projector This chapter explains how to install the projector and connect projection sources. http://www.pureglare.com.au...

  • Page 26: Installing The Projector

    Installing the Projector • We recommend using a smooth, board type screen without any Installation Methods unevenness. If the projection screen is uneven, there may be distortions in the projected image. The projector supports the following six different installation methods. Install the projector according to the installation location.

  • Page 27: When Using The Interactive Features (Eb-595Wi/Eb-585Wi/Eb-575Wi Only)

    Installing the Projector • Project images from in front of • Project images from behind a When Using the Interactive Features (EB-595Wi/EB-585Wi/ the screen. (Front projection) translucent screen. (Rear projec‐ EB-575Wi only) tion) Project from in front of the screen when using the interactive features. Set Projection to Front/Upside Down or Front.

  • Page 28: Setting Up The Touch Unit (Eb-595Wi Only)

    Extended - Easy Interactive Function - Advanced - Sync of Projectors p.135 Setting up the Touch Unit (EB-595Wi only) When using the Touch Unit, install the projector using one of the following methods. The Touch Unit cannot be used if another installation method is used.

  • Page 29: Connecting Equipment

    Connecting Equipment The port name, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods. When using the optional computer cable Connect the computer's display output port to the projector's Computer1 or Computer2 port.
  • Page 30 Connecting Equipment • When connecting to the Audio1, Audio2, and Computer1 ports, we recommend connecting cables to the ports in the following order: Audio1, Audio2, and then Computer1. • You can also set the port used for audio input from the Configuration menu. s Extended - A/V Settings - Audio Output p.132 •...

  • Page 31: Connecting A Smartphone Or Tablet Device

    Connecting Equipment Connecting a Smartphone or Tablet Device You can connect smartphones and tablet devices. By using a commercially available MHL cable, you can connect the MHL port on your device to the HDMI1/MHL port on the projector. You can send the audio with the projected image. When you connect a smartphone or tablet device to the projector, the device starts charging when images are projected.

  • Page 32: Connecting Image Sources

    Connecting Equipment Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. When using a commercially available video cable Connect the video output port on the image source to the projector's Video port using a commercially available video cable. You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio port using a commercially available audio cable.
  • Page 33 Connecting Equipment Attention • Turn off the equipment you want to connect before connecting. If the input source is on when you connect it to the projector, it could cause a malfunction. • If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction. http://www.pureglare.com.au...
  • Page 34 Connecting Equipment • You can also set the port used for audio input from the Configuration menu. s Extended - A/V Settings - Audio Output p.132 • When projecting an image source connected to the Monitor Out/Computer2 port, set the Monitor Out Port to Computer2 from the Configuration menu. s Extended - Operation - Monitor Out Port p.132 •...

  • Page 35: Connecting Usb Devices

    Connecting Equipment Connecting USB Devices You can connect devices such as USB memory, the optional Document Camera, and USB compatible hard disks and digital cameras. Using the USB cable supplied with the USB device, connect the USB device to the USB-A port on the projector. When the USB device is connected, you can project image files on the USB memory or digital camera using PC Free.
  • Page 36 Connecting Equipment Attention • If you use a USB hub, operation may not be performed correctly. Devices such as digital cameras and USB devices should be connected to the projector directly. • When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk. •...

  • Page 37: Connecting A Microphone

    Connecting Equipment Connecting a Microphone You can output microphone audio from the projector's speaker by connecting a commercially available dynamic microphone. • Plug-in-power is not supported. • Adjust Mic Input Level if the microphone audio is difficult to hear, or if it is too loud resulting in a crackling sound. s Settings - Mic Input Level p.131 •...

  • Page 38: Connecting External Equipment

    Connecting Equipment Connecting External Equipment You can output images and audio by connecting an external monitor or speaker. When outputting images to an external monitor Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor. When outputting audio to an external speaker Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
  • Page 39 • Setting gauges for functions such as Keystone, Configuration menu, or Help screens are not output to the external monitor. • Content drawn using the interactive features is not displayed on an external monitor (EB-595Wi/EB-585Wi/EB-575Wi only). Content drawn using the supplied Easy Interactive Tools can be displayed on an external monitor.

  • Page 40: Connecting A Lan Cable

    Connecting Equipment Connecting a LAN Cable Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN cable. By connecting a computer to the projector over a network, you can project images and check the status of the projector. To prevent malfunctions, use a category 5 or higher shielded LAN cable.

  • Page 41: Installing The Optional Wireless Lan Unit

    Connecting Equipment Connect the Wireless LAN unit to the wireless LAN unit installation Installing the Optional Wireless LAN Unit section. Remove both of the cable cover fixing screws to open the cable cover. http://www.pureglare.com.au...

  • Page 42: Connecting Multiple Projectors (Eb-595Wi/Eb-585Wi/Eb-575Wi Only)

    Connecting Equipment Connecting Multiple Projectors (EB-595Wi/EB-585Wi/EB-575Wi only) When using the interactive features in the same room as multiple versions of the same projector, you need to connect the optional remote control cable set (ELPKC28) to the SYNC port on each projector. Interactive pen operations are stabilized by linking the projectors using cables.
  • Page 43 Connecting Equipment • When connecting three or more projectors, you do not need to connect the first projector to the last projector. • When using the projector in the same room as another projector that does not support cable connection, set Wired Sync Mode to Mode 2 from the Configuration menu.

  • Page 44: Basic Usage

    Basic Usage This chapter explains how to project and adjust images. http://www.pureglare.com.au...

  • Page 45: Projecting Images

    Projecting Images Connect the projector to an electrical outlet with the power cord. Getting Ready to Project Turn on the projector. This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. Warning Caution When turning on the projector, do not look into the projection lens.

  • Page 46: Automatically Detect Input Signals And Change The Projected Image (Source Search)

    Projecting Images Automatically Detect Input Signals and Change After projecting the image, adjust the image if necessary. s "Correcting Keystone Distortion" p.52 the Projected Image (Source Search) s "Correcting the Focus" p.57 Press the [Source Search] button to project images from the port currently receiving an image.

  • Page 47: Switching To The Target Image Using The Remote Control

    Projecting Images • You can make settings so that images are projected from the same Switching to the Target Image Using the Remote input port the next time the projector is turned on. Control s Extended - Operation - Startup Source Search p.132 •...

  • Page 48: Projecting With Usb Display

    You can send the computer's audio with the projected image. Windows 8.1 Pro 32- and 64-bit Set USB Type B to USB Display/Easy Interactive Function or Wireless Windows 8.1 Enterprise 32- and Mouse/USB Display to use USB Display on EB-595Wi/EB-585Wi/ 64-bit EB-575Wi. Mobile Pentium III 1.2 GHz or faster Extended - USB Type B p.132...

  • Page 49: Connecting For The First Time

    - EPSON PJ_UD - EMP_UDSE.EXE on your computer. using the supplied or a commercially available USB cable. • If nothing is projected, click All Programs - EPSON Projector - Epson USB Display - Epson USB Display For Windows 2000 or Windows XP, a message asking you if Ver.x.xx on your computer.

  • Page 50: Uninstalling

    Click Start, and then click Control Panel. • If the USB Display Setup folder is not displayed automatically Click Uninstall a program under Programs. in the Finder, double-click EPSON PJ_UD - USB Display Installer on your computer. Select Epson USB Display, and then click Uninstall.
  • Page 51 Projecting Images Follow the on-screen instructions to uninstall. For OS X Double-click Applications - USB Display - Tool. Run USB Display Uninstaller. http://www.pureglare.com.au...

  • Page 52: Adjusting Projected Images

    Adjusting Projected Images Correction angle: Approx. 3˚ right and left/Approx. 3˚ up and down Correcting Keystone Distortion Press the [ ] or [ ] buttons on the control panel during You can correct keystone distortion using one of the following methods. projection to display the Keystone screen.

  • Page 53: Quick Corner

    Adjusting Projected Images Press the following buttons to correct keystone distortion. Quick Corner Press the [ ] or [ ] buttons to correct vertical distortion. This allows you to manually correct each of the four corners of the projected image separately. Press the [Menu] button while projecting.
  • Page 54 Adjusting Projected Images Select Quick Corner, and then press the [Enter] button. When the message "If this setting is changed, the image may be distorted."is displayed, press the [Enter] button again. Select the corner to correct using the [ ], [ ], [ ], and[ ] buttons on the remote control, or the [ ], [...

  • Page 55: Adjusting The Image Size

    Adjusting Projected Images Perform Adjust Zoom or Keystone. Adjusting the Image Size "Adjusting the Image Size" p.55 Press the [Wide] and [Tele] buttons on the control panel to adjust the size "Correcting Keystone Distortion" p.52 of the projected image. The Image Shift screen is displayed after you have made adjustments. Adjust the projection position using the [ ], [ ], [ ], and [ ]...

  • Page 56: Adjusting The Vertical Position Of The Image (Models Supplied With The Feet Only)

    Adjusting Projected Images Press the [Esc] button to close the adjustment screen. Raising the Height of the Image The adjustment screen disappears if no operation is performed after approximately 10 seconds. • You cannot adjust the image position when Zoom is set to the maximum Wide position.

  • Page 57: Correcting The Focus

    Adjusting Projected Images Select Pattern from Settings. Extend the rear foot. Select Test Pattern, and then press the [Enter] button. Retract the rear foot. When projecting images on a 4:3 screen using a wide-screen projector, set Pattern Type to Pattern 5 and select Pattern Display.
  • Page 58 Adjusting Projected Images Open the air filter cover. Focus to the center-bottom ( ) of the projected screen. Move the focus lever to adjust the focus. http://www.pureglare.com.au...

  • Page 59: Adjusting The Volume

    Adjusting Projected Images To remove the Test Pattern, press the [Esc] button on the remote Check that the focus matches the corners ( ) of the projected control or the control panel. screen. If any areas are out of focus, use the focus lever to adjust until the corners are the same focus.

  • Page 60: Selecting The Projection Quality (Selecting Color Mode)

    Adjusting Projected Images Each time you press the [Color Mode] button, the Color Mode name is Selecting the Projection Quality (Selecting Color displayed on the screen and the Color Mode changes. Mode) Remote control You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting.

  • Page 61: Changing The Aspect Ratio Of The Projected Image

    The setting is stored for each Color Mode. Press the [Menu] button to finish making settings. Changing the Aspect Mode (EB-595Wi/EB-585Wi/EB-585W/ EB-575Wi/EB-575W only) Auto Iris can only be set when the Color Mode is set to Dynamic or Theatre.
  • Page 62 Adjusting Projected Images Aspect mode Input Signal XGA 1024X768(4:3) WXGA 1280X800(16:10) 16:9 Full Zoom Normal or Auto 16:9 Full Zoom Native Native Projecting Images from a Computer The following shows projection examples for each aspect mode. Aspect mode Input Signal XGA 1024X768(4:3) WXGA 1280X800(16:10) If parts of the image are missing, set the Resolution setting to Wide...

  • Page 63: Changing The Aspect Mode (Eb-580/Eb-570 Only)

    Adjusting Projected Images Changing the Aspect Mode (EB-580/EB-570 only) 16:9 Projecting Images from Video Equipment Projecting Images from a Computer Each time the [Aspect] button is pressed, the aspect mode changes in the order 4:3 and 16:9. Each time the [Aspect] button is pressed, the aspect mode changes in the order Normal, 4:3, and 16:9.

  • Page 64: Using The Interactive Features

    Using the Interactive Features (EB-595Wi/EB-585Wi/EB-575Wi only) Follow the instructions in these sections to use the interactive features. http://www.pureglare.com.au...

  • Page 65: Interactive Feature Modes

    • In annotation mode, you can use interactive pens or your finger (EB-595Wi) to add notes to content projected from a computer, tablet, document camera, or other source. This helps you emphasize projected information or include additional notes for more effective lessons or presentations.

  • Page 66: Drawing On A Projected Image (Annotation Mode)

    Annotation mode lets you project from a computer, tablet, video device, or other source and add notes to your projected content using the interactive pens or your finger (EB-595Wi). You can use both pens at the same time. You can also use both pens and your finger at the same time (EB-595Wi).

  • Page 67: Using The Projected Screen As A Whiteboard (Whiteboard Mode)

    Using the Projected Screen as a Whiteboard (Whiteboard Mode) You can use the interactive pens or your finger (EB-595Wi) to write or draw on the projection surface just as you would on a chalkboard or dry erase board. You can use both pens at the same time. You can also use •...

  • Page 68: Controlling Computer Features From A Projected Screen (Computer Interactive Mode)

    • Windows 8.1 Enterprise (32- and 64-bit) You can navigate, select, and interact with your computer programs from OS X the projected screen using the interactive pens or your finger (EB-595Wi), • Mac OS X 10.5.x just as you would with a mouse.
  • Page 69 - Set the Pen Operation Mode setting to Mode 2 in the Easy the [Enter] button. Interactive Function setting in the projector's Extended menu (EB-595Wi). - Go to Control Panel > Hardware and Sound > Table PC Settings > Setup to launch the setup program and configure the interactive features.
  • Page 70 Interactive Feature Modes • For EB-595Wi: Select one of the following according to the operating system of the connected computer. - Windows XP or earlier: Select Mode 1. - Windows Vista, Windows 7, Windows 8, and OS X: Select Mode - Linux: Select Mode 3.

  • Page 71: Easy Interactive Driver System Requirements (Os X Only)

    "Using the Interactive Pens" p.73 Next time, it is displayed on the side from which you last opened the toolbar. "Using Your Finger for Interactive Touch Operations (EB-595Wi only) " p.80 • If the icon is not displayed, set the Pen Mode Icon "Interacting with the Screen"...

  • Page 72: Installing Easy Interactive Driver On Os X

    Interactive Tools Operation Guide in the Document CD-ROM for details. Turn on your computer. Insert the EPSON Projector Software for Easy Interactive Function CD into the computer. You see the EPSON window. Double-click the Install Navi icon in the EPSON window.

  • Page 73: Using The Interactive Pens

    To turn on the pen, tap the pen tip or press the button on the side. When you are finished using the pen, leave the pen as it is far from the projection screen. "Interactive Pen (EB-595Wi/EB-585Wi/EB-575Wi only)" p.20 Attention •...

  • Page 74: Pen Calibration

    - Set the Pen Operation Mode setting to Mode 1 or Mode 3 • To select a projected item, such as an icon, tap the projection (EB-595Wi). surface with the pen tip. - Set the Enable Right Click setting to On.

  • Page 75: Calibrating Automatically

    Using the Interactive Pens Calibrating Automatically You need to calibrate the first time you use your projector, and you do not need the pens or a computer for Auto Calibration. Press the [Menu] button, select the Extended menu, and press the [Enter] button.

  • Page 76: Calibrating Manually

    Using the Interactive Pens Select the Easy Interactive Function setting and press the [Enter] Adjust the focus if necessary, by opening the air filter cover on the button. side of the projector and sliding the focus lever. Press the [Enter] button to select Yes. A pattern appears then disappears, and the system is calibrated.
  • Page 77 Using the Interactive Pens Press the [Enter] button to select Yes. A flashing green circle appears in the upper left corner of your projected image. Touch the center of the circle with the tip of the pen. The circle disappears, and you see another circle below the first one.

  • Page 78: Adjusting The Pen Operation Area

    Using the Interactive Pens Switch to computer interactive mode, if necessary. "Using Computer Interactive Mode" p.68 Press the [Menu] button, select the Extended menu, and press the [Enter] button. • Make sure you are not blocking the signal between the pen and the interactive receiver.
  • Page 79 Using the Interactive Pens In the PC Interactive section, select Advanced and press the [Enter] button. The mouse pointer moves toward the top left corner. When the mouse pointer stops at the top left corner of the image, touch the tip of the pointer with the pen. The mouse pointer moves toward the bottom right corner.

  • Page 80: Using Your Finger For Interactive Touch Operations (Eb-595Wi Only)

    Using Your Finger for Interactive Touch Operations (EB-595Wi only) You can use your finger to perform the same functions as the interactive Warning pen when the Touch Unit is installed. • Children using touch operations with their fingers should always be accompanied by an adult.

  • Page 81: Using Interactive Touch Operations With Your Finger

    You can use your finger to interact with the projected screen, just as you would use an interactive pen (EB-595Wi). You can use either a pen or your You can perform the following touch operations with your finger: finger, or use both at the same time.

  • Page 82: Calibrating For Touch Operations With Your Finger

    • To scroll up or down the page, or move backward or forward in a browser window, use gestures such as flicks. Calibration coordinates the positioning of your finger with the location of your cursor (EB-595Wi). If the cursor location and your finger position do not match, you need to calibrate again. http://www.pureglare.com.au...
  • Page 83 Using Your Finger for Interactive Touch Operations (EB-595Wi only) Select the Easy Interactive Function setting and press the [Enter] • The positioning of your finger is usually adjusted when the Touch button. Unit is installed. See the Installation Guide for details.
  • Page 84 Using Your Finger for Interactive Touch Operations (EB-595Wi only) Touch and hold the center of the circle with your finger until the circle disappears and the another circle appears, then release it. The following screen appears. • For the most accurate calibration, make sure you touch the center of the circle.
  • Page 85 Using Your Finger for Interactive Touch Operations (EB-595Wi only) • If you touch the wrong position, press the [Esc] button on the remote control or control panel. This returns you to the previous dot. You cannot go back by two dots.

  • Page 86: Interacting With The Screen

    Interacting with the Screen • To switch between annotation mode and whiteboard mode, select the Follow these instructions to interact with the projected image or control the projector. following icon in the toolbar. Switching the Interactive Mode You can easily switch the interactive mode using the toolbar. •...

  • Page 87: Annotation Mode And Whiteboard Mode Toolbars

    Interacting with the Screen Redoes the last undo. Annotation Mode and Whiteboard Mode Toolbars The annotation mode toolbar or the whiteboard mode toolbar lets you draw and write on the projected screen. The toolbar also lets you easily switch to Selects a white or black background or one of four patterns annotation or whiteboard mode.

  • Page 88: Selecting Line Width And Color

    Palette setting in the projector's Extended menu. s Extended - Easy Interactive Function - General - Advanced - Color Palette p.135 Select the tool, then use the pen or your finger (EB-595Wi) to write or draw on the projection surface. http://www.pureglare.com.au...

  • Page 89: Selecting Whiteboard Templates

    Interacting with the Screen When multiple people draw on the projected screen using the multiple pens, you can select different colors and line widths for each pen. When using touch operations, all users share the same color and line width. Turns off the projector.

  • Page 90: Selecting Network Device Display From The Projector Control Toolbar

    You can select the image source from computers that are running EasyMP Multi PC Projection, and smartphones or tablets that are running Epson iProjection. You can change the projected screen by selecting from among up to 50 devices.
  • Page 91 - Hear sound from the projector (it is turned off temporarily) - Change the settings using the projector's configuration menu - Project an image using EasyMP Multi PC Projection or Epson iProjection You see the selected user's screen image. When you change the user, repeat these steps.

  • Page 92: Using The Interactive Features Over A Network

    Using the Interactive Features over a Network You can use your projector in computer interactive mode over a network. • You can only use one pen or one finger (EB-595Wi) at a time. • The response may be slower over the network.
  • Page 93 Epson does not guarantee the connection to the projector on a different subnet using EasyMP Network Projection even if you meet the above requirements. When considering the implementation, be sure to test the connection in your network environment.

  • Page 94: Windows Pen Input And Ink Tools

    Windows Pen Input and Ink Tools If you are using Windows 8.1, Windows 8, Windows 7, or Windows Vista, you can use the pen input and Ink tools to add handwritten input and annotations to your work. You can also use the pen input and Ink features over a network when you set the interactive features to be available on your network.

  • Page 95: Using Windows Pen Input And Ink Features

    > All Programs > Accessories > Tablet PC > Tablet PC Input Panel. You can write in the box using the pen or your finger (EB-595Wi), then select from a variety of options to edit and convert the text. http://www.pureglare.com.au...

  • Page 96: Useful Functions

    Useful Functions This chapter explains useful functions for giving presentations and so on, and the security functions. http://www.pureglare.com.au...

  • Page 97: Projection Functions

    Projection Functions Type File Type (Ex‐ Notes Projecting Images Stored on a USB Storage Device tension) (PC Free) • Cannot project images with a resolution greater .avi (Motion JPEG) than 1280 x 720. By connecting a USB storage device such as a USB memory or a USB hard •...

  • Page 98: Pc Free Operating Methods

    Projection Functions PC Free Operating Methods • You can also insert a memory card into a USB card reader and then connect the reader to the projector. However, some commercially Although the following steps are explained based on the remote control, available USB card readers may not be compatible with the you can perform the same operations from the control panel.

  • Page 99: Projecting The Selected Images Or Movies

    Projection Functions While projecting, press the [ ] or [ ] button. If not all of the files and folders are displayed on the current screen, press the []] button on the remote control, or position the cursor on Next Page at the bottom of the screen and press the [Enter] button.

  • Page 100: Projecting Image Files In A Folder In Sequence (Slideshow)

    Projection Functions When projection is finished, you are returned to the file list screen. Use the [ ], [ ], [ ], and [ ] buttons to select the image file you want to project. Projecting Image Files in a Folder in Sequence (Slideshow) You can project the image files in a folder in sequence, one at a time.

  • Page 101: Image File Display Settings And Slideshow Operation Settings

    Projection Functions screen, projection starts again from the beginning when it reaches When the following Option screen is displayed, set each of the the end. items. "Image File Display Settings and Slideshow Operation Settings" Enable the settings by positioning the cursor on the target item and p.101 pressing the [Enter] button.

  • Page 102: Hiding The Image And Sound Temporarily (A/V Mute)

    Projection Functions • If you use this function when projecting moving images, the images Use the [ ], [ ], [ ], and [ ] buttons to position the cursor and sound continue to be played back by the source, and you cannot over OK, and then press the [Enter] button.

  • Page 103: Pointer Function (Pointer)

    Projection Functions Move the Pointer icon ( • Audio does not stop. • For moving images, the images continue to play back while the Remote control screen is frozen, so it is not possible to resume projection from the point where the screen was frozen. •...

  • Page 104: Using The Remote Control To Operate The Mouse Pointer (Wireless Mouse)

    Projection Functions Start E-Zoom. Enlarge. Remote control Press the [ ] button to display the Cross ( [z] button: Expands the area each time Remote control it is pressed. You can expand quickly by holding the button down. [x] button: Reduces images that have been enlarged.
  • Page 105 Use the following procedure to enable the Wireless Mouse function. [Enter] button: Left click. Press quickly twice to double-click. Set USB Type B to Wireless Mouse/USB Display from the Configuration menu (EB-595Wi/EB-585Wi/EB-575Wi only). Extended - USB Type B p.132 Drag and drop...

  • Page 106: Saving A User's Logo

    - When Extended - USB Type B is set to anything other than • Once a User's Logo has been saved, the logo cannot be returned to Wireless Mouse/USB Display (EB-595Wi/EB-585Wi/EB-575Wi only). the factory default. - When projecting images from a device connected to the HDMI1/ •...
  • Page 107 Projection Functions Move the box to select the part of the image to use as the User's Logo. You can perform the same operations from the projector's control panel. Remote control • When User's Logo Protection from Password Protection is set to On, a message is displayed and the User's Logo cannot You can save at 400x300 dots in size.

  • Page 108: Saving User Pattern

    Projection Functions Select the zoom factor from the zoom setting screen. Project the image you want to use as the User Pattern, and then press the [Menu] button. "Using the Configuration Menu" p.125 Using Remote Control Using the Control Panel When the message "Save this image as the User's Logo?"...
  • Page 109 Projection Functions If User Pattern is selected when Keystone, E-Zoom, Aspect, Adjust Zoom, or Image Shift are being performed, the function currently being performed is temporarily canceled. When "Do you want to use the currently projected image as the User Pattern?" is displayed, select Yes. When you press the [ ] button, the message "Do you save this image as the User Pattern?"...

  • Page 110: Security Functions

    Security Functions • User's Logo Protection The projector has the following enhanced security functions. Even if someone tries to change the User's Logo set by the owner of the • Password Protection projector, it cannot be changed. When User's Logo Protection is set to You can limit who can use the projector.

  • Page 111: Entering The Password

    Security Functions Remote control • If Password Protection is already activated, you must enter the password. If the password is entered correctly, the Password Protection setting menu is displayed. s "Entering the Password" p.111 • When the password is set, stick the supplied password protect sticker in a visible position on the projector as a further theft deterrent.

  • Page 112: Restricting Operation (Control Panel Lock)

    30 times in succession, the following message is displayed and the projector does not accept any more Password entries. "The projector's operation will be locked. Contact Epson as described in your documentation." Epson Projector Contact List Restricting Operation (Control Panel Lock) Do one of the following to lock the operation buttons on the control panel.

  • Page 113: Anti-Theft Lock

    Security Functions Select Yes when the confirmation message is displayed. Anti-Theft Lock The control panel buttons are locked according to the setting you chose. The projector is equipped with the following types of anti-theft security devices. You can release the control panel lock by one of the following •...

  • Page 114: Monitoring And Controlling

    EasyMP Monitor lets you carry out operations such as checking the status of multiple Epson projectors that are connected to a network at a computer Use Microsoft Internet Explorer 8.0 or later as the Web browser. Use Safari monitor, and controlling the projectors from the computer.

  • Page 115: Displaying The Web Control Screen

    Monitoring and Controlling Items that Can only Be Set with a Web Browser • Enter the user ID even if the password setting is disabled. The • SNMP Community Name (up to 32 single-byte alphanumeric characters) user ID cannot be changed. •...

  • Page 116: Using The Mail Notification Function To Report Problems

    Monitoring and Controlling Name Function Changes pages in files such as PowerPoint files when using [Page] buttons [Up] [Down] the following projection methods. • When using the Wireless Mouse function s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.104 •...

  • Page 117: Reading Error Notification Mail

    Management Using SNMP Sender: Email Address 1 Email title: EPSON Projector By setting SNMP to On in the Configuration menu, notification messages are sent to the specified computer when a problem or warning occurs. This...

  • Page 118: Esc/Vp21 Commands

    For more details, contact your local dealer or the nearest address provided turned on, a colon ":" (3Ah) is returned. in the Epson Projector Contact List. When a command is input, the projector executes the command and Epson Projector Contact List returns a ":", and then accepts the next command.

  • Page 119: About Pjlink

    Monitoring and Controlling • Projector input port name: RS-232C About PJLink <At the projector> <At the computer> PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols.

  • Page 120: About Crestron Roomview

    This manual describes how to perform operations on your computer using EPSON a Web browser. • Model name displayed for "Product name information query" • You can only enter single-byte alphanumeric characters and symbols. EPSON 595 • The following functions cannot be used while using Crestron EPSON 585 ® RoomView EPSON 580 s "Changing Settings Using a Web Browser (Web Control)"...
  • Page 121 Monitoring and Controlling Start a Web browser on the computer. Button Function A/V Mute Turns the video and audio on or off. Enter the IP address of the projector in the address field of the s "Hiding the Image and Sound Temporarily (A/V Web browser, and press the Enter key on the keyboard.
  • Page 122 Monitoring and Controlling Button Function Performs the same operation as the [Enter] button on the remote control. s "Remote Control" p.17 Menu Displays and closes the Configuration menu. Auto If clicked while projecting analog RGB signals from Computer1 port or Computer2 port, automatically optimizes the image by adjusting the Tracking, Sync., and Position.
  • Page 123 Monitoring and Controlling Item Function Item Function DHCP Select the Enabled check box to use DHCP. You cannot New Password Enter the new password when changing the password to enter an IP address if DHCP is enabled. open the operation window. (Up to 26 single-byte alphanumerical characters) IP Address Enter the IP address to assign to the currently connected...

  • Page 124: Configuration Menu

    Configuration Menu This chapter explains how to use the Configuration menu and its functions. http://www.pureglare.com.au...

  • Page 125: Using The Configuration Menu

    Using the Configuration Menu This section explains how to use the Configuration menu. Select a submenu item. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations.

  • Page 126: List Of Functions

    List of Functions Top Menu Name Submenu Name Items or Setting Values Configuration Menu Table Video Signal Auto, NTSC, NTSC4.43, PAL, Settable items vary depending on the model being used and the image M-PAL, N-PAL, PAL60, and SECAM signal and source being projected. Aspect Normal, Auto, 4:3, 16:9, Full, Top Menu Name...

  • Page 127: Network Menu

    List of Functions Top Menu Name Submenu Name Items or Setting Values Top Menu Name Submenu Name Items or Setting Values Display Messages, Display Background, Video Signal Startup Screen, A/V Mute, Refresh Rate Toolbars, Pen Mode Icon, Sync Info Projector Control Status User's Logo Serial Number...

  • Page 128: Image Menu

    List of Functions "Automatically Detect Input Signals and Change the Projected Image Top Menu Name Submenu Name Items or Setting Values (Source Search)" p.46 IP Address Display On and Off Security menu Security Off, WPA2-PSK, and WPA/WPA2-PSK p.140 Passphrase Wired LAN menu IP Settings DHCP, IP Address, Subnet Mask, and Gateway Address...

  • Page 129: Signal Menu

    List of Functions Sub-menu Function Signal Menu You can adjust the overall tint of the image. The image is tinted Color Temp. blue when a high value is selected and tinted red when a low value Settable items vary depending on the image signal and source currently is selected.
  • Page 130 List of Functions Sub-menu Function Sub-menu Function (Only available when analog RGB computer signals are being You can select the input signal from the S-Video port or the Tracking Video Signal input.) Video port. If set to Auto, video signals are recognized automatically.

  • Page 131: Settings Menu

    Power Consumption, Info, Progressive, Test Pattern, Resolution, Mic Input Level, Pattern Display, Auto Control Panel You can use this to restrict operation of the projector's control Calibration (EB-595Wi/EB-585Wi/EB-575Wi only) panel. Lock s "Restricting Operation (Control Panel Lock)" p.112 http://www.pureglare.com.au...

  • Page 132: Extended Menu

    Easy Interactive Function s "Using the Interactive Features If a pattern is displayed for a long time, a residual (EB-595Wi/ (EB-595Wi/EB-585Wi/EB-575Wi only)" p.64 image may be visible in projected images. EB-585Wi/ See the following table for more details. EB-575Wi only) s "Easy Interactive Function Setting Items"...
  • Page 133 Set Time. the same source as the last time the projector was used. Pen Mode Icon (EB-595Wi/EB-585Wi/EB-575Wi only): Set Monitor Out Port: Changes the input and output for the whether or not to always display the icon to change the pen Computer2/Monitor Out ports.
  • Page 134 Easy Interactive Function: Allows you to use the interactive A/V Settings USB Type B Communication On.) (EB-595Wi/ features to operate computers (computer interactive mode). EB-585Wi/ USB Display and Wireless Mouse functions are not To perform the following functions when the projector is in EB-575Wi only) available.

  • Page 135: Easy Interactive Function Setting Items

    Touch Unit. • Power: Set to On to turn on the power for the Touch Unit. s "Connecting Multiple Projectors (EB-595Wi/ • Angle Adjustment: Performs angle adjustment for laser EB-585Wi/EB-575Wi only)"...

  • Page 136: Network Menu

    Sub-menu Function pen area is automatically adjusted as the resolution for the Pen Operation For EB-595Wi connected computer changes. Set to Off if you do not want to Set the operation modes for the interactive pen or touch Mode automatically adjust the pen area that has been manually operations depending on the operating system on the connected adjusted.

  • Page 137: Notes On Operating The Network Menu

    The Network menu contains items that require input of alphanumerics For more details, contact your local dealer or the nearest address provided in during setup. In this case, the following software keyboard is displayed. Use the Epson Projector Contact List. the [ ], [...

  • Page 138: Basic Menu

    List of Functions Basic Menu • Each time the CAPS key is selected and the [Enter] button is pressed, it switches between upper case and lower case. • Each time the SYM1/2 key is selected and the [Enter] button is pressed, it sets and changes the symbol keys for the section enclosed by the frame.

  • Page 139: Wireless Lan Menu

    List of Functions Sub-menu Function Sub-menu Function When set to On, you have to enter the keyword when you try to Set the connection mode to use when connecting the projector Projector Key‐ Connection word connect the projector to a computer via a network. As a result, Mode and a computer via a wireless LAN.

  • Page 140: Security Menu

    List of Functions Security Menu Sub-menu Function (This can be set only if Connection Mode is set to Advanced.) IP Settings You can make network settings. DHCP: Set to On to make network settings using DHCP . If this is set to On, you cannot set any more addresses. IP Address: You can input the IP address assigned to the projector.

  • Page 141: Wired Lan Menu

    List of Functions Type of security Wired LAN Menu When the optional wireless LAN unit is installed and being used in Advanced connection mode, it is strongly recommended that you set security. WPA is an encryption standard that improves the security for wireless networks.

  • Page 142: Mail Menu

    List of Functions Sub-menu Function Sub-menu Function To prevent the IP address from being displayed on Network Info You can input the port number for the SMTP server. The default IP Address Dis‐ Port Number play in the Network menu and on the LAN Standby screen, set this to value is 25.

  • Page 143: Others Menu

    Set this to On when connecting to the network using Bonjour. See Apple's Web site for more information on the Bonjour service. http://www.apple.com/ Message Broad‐ You can switch the EPSON Message Broadcasting function to enable or disable. casting Sub-menu Function Set to On to monitor the projector using SNMP.

  • Page 144: Reset Menu

    List of Functions Reset Menu ECO Menu Resets all of the network settings. When you make ECO menu settings, the projector performs functions to save power. When power saving settings have been enabled, a leaf icon is displayed next to each submenu. Sub-menu Function To reset all of the Network settings, select Yes.

  • Page 145: Info Menu (Display Only)

    List of Functions Sub-menu Function Sub-menu Function (This item can only be set when Power Consumption is set to You can reset all adjustment values on the ECO menu to their Light Optimizer Reset Normal or Auto.) default settings, except for Standby Mode. See the following to return all menu items to their default settings.

  • Page 146: Reset Menu

    List of Functions Sub-menu Function Reset Menu You can display the source name for the connected Source equipment currently being projected. Input Signal You can display the content of Input Signal set in the Signal menu according to the source. You can display the resolution.

  • Page 147: Performing Batch Setup For Multiple Projectors

    Performing Batch Setup for Multiple Projectors Once the Configuration menu content has been set for one projector, you can use it to perform batch setup for multiple projectors (batch setup function). Use one of the following methods. • Setup using a USB memory. •...

  • Page 148: Troubleshooting

    Troubleshooting This chapter describes how to identify problems and what to do if a problem is found. http://www.pureglare.com.au...

  • Page 149: Using The Help

    Using the Help If a problem occurs with the projector, the Help screen is displayed to assist Confirm the selection. you by pressing the Help button. You can solve problems by answering the Using Remote Control Using the Control Panel questions.

  • Page 150: Problem Solving

    Problem Solving If you are having a problem with the projector, first check the projector's indicators and see "Reading the Indicators". See the following if the indicators do not show clearly what the problem might be. "When the Indicators Provide No Help" p.154 Reading the Indicators The projector is provided with the following four indicators.
  • Page 151 Temp Internal Error Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Blue - Flash‐ Orange - Epson Projector Contact List...
  • Page 152 Epson Projector Contact List. Epson Projector Contact List If the lamp is cracked: Contact your local dealer or the nearest address provided in the Epson Projector Contact List. (Images cannot be projected until the lamp is replaced.) Epson Projector Contact List When using at an altitude of 1500 m or more, set High Altitude Mode to On.
  • Page 153 If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List • See the following if the projector is not operating properly, even though the indicators are all showing normal.

  • Page 154: When The Indicators Provide No Help

    Moving images played back from a computer appear black and • Cannot perform touch operations correctly (EB-595Wi only) p.164 the images are not projected • Cannnot Adjust the Angle of Touch Unit (EB-595Wi only) • Projection stops automatically p.165 p.156 •...

  • Page 155: Problems Relating To Images

    Problem Solving Problems Relating to Images No Images Appear Check Remedy Did you press the [t] power button? Press the [t] power button to turn the power on. Are all of the indicators off? The power cord is not connected correctly or power is not being supplied. Connect the projector's power cord correctly.

  • Page 156: Moving Images Are Not Displayed (Only The Moving Image Portion Turns Black)

    Problem Solving Moving Images Are Not Displayed (only the Moving Image Portion Turns Black) Check Remedy Is the computer's image signal being output to the LCD and the Change the image signal from the computer to external output only. Check your computer's documentation, or contact monitor? the computer's manufacturer.

  • Page 157: The Message No Signal Is Displayed

    Problem Solving The Message "No Signal" Is Displayed Check Remedy Are the cables connected correctly? Check that all the cables required for projection are securely connected. s "Getting Ready to Project" p.45 Is the correct port selected? Change the image by pressing the [Source Search] button on the remote control or the control panel. s "Automatically Detect Input Signals and Change the Projected Image (Source Search)"...

  • Page 158: Interference Or Distortion Appear In Images

    Signal - Tracking, Sync. p.129 Is Transfer layered window selected? Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then clear the Transfer layered window checkbox. (Only when projecting USB Display)

  • Page 159: The Mouse Cursor Flickers (Only When Projecting Usb Display)

    Is Make the movement of the mouse pointer smooth. selected? Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select the Make the movement of the mouse pointer smooth. checkbox. (Windows 2000 is unavailable.) Windows Aero becomes unavailable if this is selected in Windows 7 and Windows Vista.

  • Page 160: Image Colors Are Not Right

    Problem Solving Image Colors Are Not Right Check Remedy Do the input signal settings match the signals from the connected Change the following settings according to the signal for the connected equipment. device? • When the image is from a device connected to the Computer1 or Computer2 port. s Signal - Input Signal p.129 •...

  • Page 161: Problems When Projection Starts

    Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List Is the Control Panel Lock set to Full Lock? Press the [t] power button on the remote control.

  • Page 162: Cannot Operate A Computer From The Projected Screen After Connecting To The Computer

    Is the Pen Operation Mode set correctly? For EB-595Wi: When using interactive pens or your finger as you would use a mouse, set the Pen Operation Mode from the Configuration menu according to the operating system of the connected computer.

  • Page 163: Computer's Mouse Does Not Work Correctly

    Connect the optional remote control cable set (ELPKC28). If you do not have a remote control cable set, change the Distance of Projectors setting from the Configuration menu. s "Connecting Multiple Projectors (EB-595Wi/EB-585Wi/EB-575Wi only)" p.42 s Extended - Easy Interactive Function - Advanced Distance of Projectors p.135...

  • Page 164: The Response Time For The Interactive Pen Is Slow (Only When Projecting Usb Display)

    Interactive pen operations may be slow when Windows Aero is enabled. Disable Windows Aero on the computer being used. Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select the Disable Windows Aero and improve the tracking of the interactive pen. checkbox.

  • Page 165: Cannnot Adjust The Angle Of Touch Unit (Eb-595Wi Only)

    Problem Solving Cannnot Adjust the Angle of Touch Unit (EB-595Wi only) Check Remedy Are there spacers attached to the back of Touch Unit? When securing the Touch Unit with screws, you must attach the supplied spacers to the screw holes. Check that spacers are attached to the back of the Touch Unit.

  • Page 166: No Sound Can Be Heard From The Microphone

    If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output. Is Output audio from the projector selected? Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select the Output audio from the projector checkbox.

  • Page 167: The Remote Control Does Not Work

    Did a fatal abnormality occur and the projector come to a sudden When the projector comes to a sudden stop, email cannot be sent. stop? If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.

  • Page 168: Cannot Change Settings Using A Web Browser

    Problem Solving Check Remedy Is the Mail Notification function set correctly in the Configuration An error notification email is sent according to the Mail settings in the Configuration menu. Check if it is set correctly. menu? s "Mail Menu" p.142 Cannot Change Settings Using a Web Browser Check Remedy...

  • Page 169: About Event Id

    Wireless LAN - IP Settings p.139 0899 Other communication errors If restarting the projector or EasyMP Network Projection does not solve the problem, contact your local dealer or the nearest address provided in the Epson Projector Contact List. Epson Projector Contact List http://www.pureglare.com.au...

  • Page 170: Maintenance

    Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come. http://www.pureglare.com.au...

  • Page 171: Cleaning

    Cleaning You should clean the projector if it becomes dirty or if the quality of Attention projected images starts to deteriorate. Do not rub the lens with harsh materials or subject the lens to shocks, as it can easily become damaged. Caution Before cleaning, turn off the projector's power and unplug the power cable.

  • Page 172: Cleaning The Air Filter

    Cleaning Open the air filter cover. Attention Press the tabs on the air filter cover and open the cover. Do not rub the obstacle sensor with harsh materials or subject the sensor to shocks. Damage on the surface of the sensor may cause malfunctions. Cleaning the Air Filter Clean the air filter and the air intake vent when the following message is displayed.
  • Page 173 Cleaning Remove the air filter. Replace the air filter. Grip the tab in the center of the air filter, and pull the air filter straight out. Remove any dust remaining on the air filter by using a vacuum cleaner from the front. http://www.pureglare.com.au...
  • Page 174 Cleaning Close the air filter cover. • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s "Replacing the Air Filter" p.179 • It is recommended that you clean these parts at least once every three months.

  • Page 175: Replacing Consumables

    It is time to replace the lamp when: • The following message is displayed. "It is time to replace your lamp. Please contact your Epson projector reseller or visit www.epson.com to purchase." • The projected image gets darker or starts to deteriorate.

  • Page 176: How To Replace The Lamp

    If the lamp is still hot, burns or other injuries may result. It takes • We recommend the use of genuine Epson option lamps. The use of non- approximately one hour after the power has been turned off for the lamp to sufficiently cool down.
  • Page 177 Replacing Consumables Wait until the lamp has sufficiently cooled down, and then remove When the projector is mounted on a wall or suspended from a the lamp cover at the top of the projector. ceiling and you need to replace the lamp, remove the lamp Loosen the lamp cover fixing screw with the screwdriver supplied cover carefully and support it with your hand to prevent it from with the new lamp unit or a cross-head screwdriver.
  • Page 178 Insert the new lamp along the guide rail in the correct direction so local dealer for further advice. that it fits in place, push in firmly, and then press the handle down. Tighten the two lamp fixing screws. Epson Projector Contact List http://www.pureglare.com.au...

  • Page 179: Resetting The Lamp Hours

    Replacing Consumables Attach the lamp cover. Only reset the lamp hours after the lamp has been replaced. Otherwise, the lamp replacement period will not be indicated correctly. Replacing the Air Filter Air Filter Replacement Period If the message is displayed frequently even though the air filter has been cleaned, replace the air filter.
  • Page 180 Replacing Consumables Open the air filter cover. Remove the air filter. Press the tabs on the air filter cover and open the cover. Grip the tab in the center of the air filter, and pull the air filter straight out. http://www.pureglare.com.au...
  • Page 181 Replacing Consumables Install the new air filter. Close the air filter cover. http://www.pureglare.com.au...
  • Page 182 Replacing Consumables Dispose of used air filters properly in accordance with your local regulations. Material of the frame part: Polypropylene Material of the filter part: Polypropylene http://www.pureglare.com.au...

  • Page 183: Appendix

    Appendix http://www.pureglare.com.au...

  • Page 184: Optional Accessories And Consumables

    Computer cable ELPKC10 (20 m - for mini D-Sub15-pin/mini D-Sub 15pin) Special expertise is required to suspend the projector. Contact your local dealer or the nearest address provided in the Epson Projector Contact List. Component video cable ELPKC19 Epson Projector Contact List...

  • Page 185: Screen Size And Projection Distance

    Screen Size and Projection Distance The distance between the projector and the bottom of the screen (when Projection Distance (for EB-595Wi/EB-585Wi/ mounting on a wall or ceiling, or installing vertically) EB-585W/EB-575Wi/EB-575W) The distance between the projector and the top of the screen (when placing...

  • Page 186: Projection Distance (For Eb-580/Eb-570)

    Screen Size and Projection Distance 16:9 Screen Size Minimum (Wide) to Minimum Minimum Maximum (Tele) (Wide) (Wide) 60" 133x75 35.9 - 49.2 13.6 88.3 70" 155x87 42.2 - 57.9 104.2 80" 177x100 48.6 - 60 20.5 120.1 90" 199x112 55 - 60 23.9 Projection distance 97"...
  • Page 187 Screen Size and Projection Distance Unit: cm 16:9 Screen Size Minimum (Wide) to Minimum Minimum Maximum (Tele) (Wide) (Wide) 52" 115x65 35.3 - 48.5 17.7 82.5 60" 133x75 41.1 - 56.3 21.5 96.2 70" 155x87 48.3 - 60 26.3 113.4 80"...

  • Page 188: Supported Monitor Displays

    Supported Monitor Displays Signal Refresh Rate (Hz) Resolution (dots) Supported Resolutions MAC21” 1152x870 *1 EB-595Wi/EB-585Wi/EB-585W/EB-575Wi/EB-575W only Computer Signals (Analog RGB) *2 Only compatible when Wide is selected as the Resolution from the Signal Refresh Rate (Hz) Resolution (dots) Configuration menu.

  • Page 189: Mhl Input Signal

    SDTV (480i/480p) 720x480 SDTV (576i/576p) 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24/30/50/60 1920x1080 * EB-595Wi/EB-585Wi/EB-585W/EB-575Wi/EB-575W only MHL Input Signal Signal Refresh Rate (Hz) Resolution (dots) 640x480 SDTV (480i/480p) 720x480 SDTV (576i/576p) 720x576 HDTV (720p) 50/60 1280x720...

  • Page 190: Specifications

    Specifications Projector General Specifications EB-595Wi EB-585Wi EB-585W Product name 367 (W) x 155 (H) x 375 (D) mm (not including raised section) Dimensions 0.59" Wide LCD panel size Polysilicon TFT active matrix Display method 1,024,000 Resolution WXGA (1280 (W) x 800 (H) dots)x 3...
  • Page 191 Specifications EB-575Wi EB-575W EB-580 EB-570 Product name 367 (W) x 155 (H) x 375 (D) mm (not including raised section) Dimensions 0.59" Wide 0.55" LCD panel size Polysilicon TFT active matrix Display method 1,024,000 786,432 Resolution WXGA (1280 (W)x 800 (H) dots)x 3 XGA (1024 (W) x 768 (H) dots)x 3 Manual Focus adjustment...
  • Page 192 Specifications Connectors Computer1 port Mini D-Sub 15-pin (female) Computer2 input/Monitor Out Mini D-Sub 15-pin (female) ports RCA pin jack Video port Mini DIN 4-pin S-Video port Stereo mini pin jack Audio1 port Stereo mini pin jack Audio2 port Stereo mini pin jack Audio port Stereo mini pin jack Mic port...
  • Page 193 Specifications This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 3˚ it could be damaged and cause an accident. http://www.pureglare.com.au...
  • Page 194 CPU Boards and Power Supplies used with Class B Personal Computers Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference Epson America, Inc. in a residential installation. This equipment generates, uses, and can radiate Located at:...
  • Page 195 Specifications FCC Statement for Verification This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. http://www.pureglare.com.au...

  • Page 196: Appearance

    Appearance Units: mm http://www.pureglare.com.au...
  • Page 197 Appearance Without feet With feet Units: mm http://www.pureglare.com.au...

  • Page 198: Glossary

    AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. AMX Device Discovery Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON). See the AMX Web site for more details.
  • Page 199 Glossary The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be Refresh Rate scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh rate and is expressed in hertz (Hz).

  • Page 200: General Notes

    • Removing the label of conformance Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the...

  • Page 201: General Notice

    Crestron and Crestron RoomView are registered trademarks of Crestron Electronics, Inc. Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. ©SEIKO EPSON CORPORATION 2014. All rights reserved.

This manual is also suitable for:

Eb-585wiEb-575wiEb-575wEb-570Eb-585wEb-580

Table of Contents

Save PDF