REVISION HISTORY EX2T CHASSIS 9-888-103-06 MODEL PART NO. : KLV-26S550A KLV-32S530A KLV-32S550A KLV-32S550A/L KLV-32S550A/T KLV-37S550A SUFFIX DATE SUPP / CORR DESCRIPTION 2009/01 1st Issue 2009/03 Supp-1 Part Information Change: Addition of: i) Removal and Installation of Rear Cover and Switch Unit removal.
OPERATION. REPLACE THESE COMPONENTS WITH 6) Check the line cords for cracks and abrasion. SONY PARTS WHOSE PART NUMBERS APPEAR AS Recommend the replacement of any such line cord to the SHOWN IN THIS MANUAL OR IN SUPPLEMENTS customer.
370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com – 4 –...
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W SECTION 2 SELF DIAGNOSTIC FUNCTION 2-1. Overview of Control Buttons 2-4. LED Pattern When safety shutdown occurs, Standby LED display reports the cause by using the blinking patterns as indicated below. 2.0 sec 2.0 sec 0.3 sec 0.3 sec...
1) The illustrations provided in this section might have slight difference from actual sets. 2) Refer to Removal & Installation of Rear Cover and Switch Unit Procedure in Section 1 Safety Notes. 4-1. KLV-26S550A 4-1-1. Rear Cover Removal 4-1-2. Stand Assy Removal...
--> avoid disconnection of wires. 2. Make sure wires are kept away from sharp edges, heatsinks & other Hook high-temperature parts. 5-1. KLV-26S550A 5-1-1. Wire Dressing overview. P5-6 P5-6 5-1-2. Insert Connector Assy 10p and Speaker Connector Assy 4P. – 12 –...
Page 14
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 5-1-3. Insert Connector Assy 14P 1) Attach Sheet Core, C (X2) to frame bottom as shown. 2) Insert Conn Assy 14P to inverter and GT3 PWB as shown. Attach Sheet Core, C as shown. Dress SP Conn Assy 4P;...
Page 15
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 5-1-5. Power Cord Wire Dressing CISPR model Non CISPR model 1) Install Ferrite core to AC power cord at specified position as shown. 1) Install AC cord holder to AC power cord at specified position 2) Install AC cord holder to AC power cord at specified position as shown.
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 5-2. KLV-32S530A, 32S550A, 32S550A/L, 32S550A/T 5-2-1. Wire Dressing overview . Non-CISPR model CISPR model P4-5 P4-5 5-2-2. Insert Connector Assy 10P and SP Connector Assy 4P Left Speaker Right Speaker 1) Insert Connector Assy 10P to HT1 PWB. Attach HT1 PWB 1) Insert Connector Assy 10P to SW unit.
Page 17
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 5-2-3. Attach C Sheet Core and Insert Connector Assy 14P 1) Attach Sheet Core, C to frame bottom as shown. 2) Attach Sheet Core, C to main bracket as shown. 3) Insert Conn Assy 14P to inverter and GT3 PWB as shown. Attach Sheet Core, C as shown. Attach Sheet Core, C Attach Sheet Core, C to to Main Bracket (X1).
Page 18
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 5-2-5. AC Power Cord Wire Dressing Non-CISPR model 1) Install AC cord holder to AC power cord at specified position as shown. 2) Then install the AC power cord with holder into under cover. 3) Lastly, dress AC power cord using pin, wire A6101 as shown.
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 5-3. KLV-37S550A 5-3-1. Wire Dressing overview. CISPR model Non-CISPR model P5-6 P5-6 P3-4 P3-4 5-3-2. Insert Connector Assy 10P and SP Connector Assy 4P 1) Insert Connector Assy 10P to HT1 PWB. Attach HT1 PWB to Light Guide on Bezel. 2) Insert SP Conn Assy 4P to speaker as shown.
Page 20
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 5-3-4. Attach C Sheet Core and Insert Connector Assy 14P 1) Attach Sheet Core, C (X3) to frame bottom as shown. 2) Insert Conn Assy 14P to inverter and G4T PWB as shown. Attach Sheet Core, C as shown. Do not cover screw hole with Sheet Core, C...
Page 21
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 5-3-6. Install AC Cord Holder and Power Cord Non-CISPR model 1) Install AC cord holder to AC power cord at specified position as shown. 2) Then install the AC power cord with holder into under cover. 3) Keep the AC power cord away from surrounding parts.
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W SECTION 6 SERVICE ADJUSTMENTS 6-1. Accessing Diagnostic Menu 6-3. Control keys via Remote Commander. Buttons on the Remote Commander to access the service 1. While TV set on standby, press the following sequence on menu items and adjust the data values.
Page 23
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 6-4-3. White Balance Adjustment 6-4-2. Resetting the User Menu- Factory Reset Test Pattern: While TV on standby mode, press the following sequence a) Connect video signal of white to video input on the Remote commander. b) Restort to original value : Color temp=0, Picture=Max,Brightness=50,Backlight=max While TV on standby mode, press the following sequence...
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 7-1-3. HT1 Board HT 1 HT 1 HT 1 HT 1 BO ARD BO ARD BO ARD BO ARD IC 1000 C N1000 C N1000 Q 1000 B T B O A R D C N1000 Q 1001 C N1000...
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 7-4. SCHEMATIC DIAGRAM 7-5. PRINTED WIRING BOARDS Board Function Note I/O, AV INPUT/OUTPUT, HDMI, Due to complexity of the board, performing PC,I, HP/AUDIO/LOC TOP/DDR/ component level field repairs are not POWER DC/ TUNER.FM.IF/ recommended.
/or replaced. 7-685-648-79 SCREW +BVTP 3X12 TYPE2 IT-3 Note: The illustrations provided in this section might have slight difference from actual set. 8-1. KLV-26S550A 8-1-1. REAR CABINET AND STAND ASSY REF. NO. PART NO. DESCRIPTION REMARK...
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK *********************************************************************** 9-1. KLV-26S550A MISCELLANEOUS * A-1663-488-A HT1 MOUNT ***************** ************ 1-487-326-11 SWITCH UNIT * A-1665-115-A GT3 COMPLETE (EXCEPT 26S550A RUSSIA)
Page 42
32S550A/L SOUTH AFRICA, 32S550A/T ME) 1-487-326-11 SWITCH UNIT 4-130-985-41 MANUAL, INSTRUCTION (PERSIAN) (32S530A(ME), 32S550A ME , 4-103-642-11 EMBLEM, SONY NO8 (32S550A(IRAN)) 32S550A/L SOUTH AFRICA, 32S550A/T ME) 4-130-985-51 MANUAL, INSTRUCTION (RUSSIAN) (32S530A(ME), 32S550A (ME, RUSSIA), *************************************************************************** 32S550A/L (RUSSIA, SOUTH AFRICA), 32S550A/T (ME, RUSSIA))
Page 43
1-487-326-11 SWITCH UNIT 4-130-985-11 MANUAL, INSTRUCTION (ENGLISH) 4-100-136-01 SHEET(CORE), C (32S550A(IRAN)) (37S550A (GE, ME, NEW ZEALAND, 4-103-642-21 EMBLEM, SONY NO. 8 (37S550A(IRAN)) SOUTH AFRICA, TUNISIA)) 4-130-985-21 MANUAL, INSTRUCTION (CHINESE) (37S550A (GE, ME)) *********************************************************************** 4-130-985-31 MANUAL, INSTRUCTION (ARABIAN) (37S550A (ME, TUNISIA))
Page 44
SUPPLEMENT-1 EX2T CHASSIS MODEL COMMANDER DEST. MODEL COMMANDER DEST. KLV-26S550A KLV-32S550A/L RM-GA016 & GE, India, ME, RM-GA016 & GE, ME, Philippines, RM-GA016W Philippines, Russia, (Blue) RM-GA016W Russia, South Africa South Africa, Thailand KLV-32S550A/T RM-GA016 & GE, ME, Philippines, KLV-32S530A RM-GA016 & ME, Thailand...
Page 45
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W SECTION 1 SAFETY NOTES 1-7. Removal of Rear Cover Procedure Note: For Screws informations, Please refer to Section 4 : Disassembly . Push point at Switch Unit. 3) Remove Rear Cover from Switch Unit while Photo show the position during rear cover pushing at Switch Unit towards inner set.
Page 46
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W SECTION 2 SELF DIAGNOSTIC FUNCTION 2-7. Triage Chart 2-7-1. KLV-26S550A, 32S530A, 32S550A, 32S550A/L, 32S550A/T Failure No Power Sound NG Picture NG Panel Speaker 2-7-2. KLV-37S550A Failure No Power Sound NG Picture NG Panel Speaker –...
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W SECTION 3 TROUBLE SHOOTING 3-1. Flowchart 3-1-1. NO POWER NO POWER No Power Check AC cable connection AC cable NG STBY_VCC(GT3:6.2V, G4T:5.6V) CN7000_7pin on BT2 Board GT3, G4T Board NG BT2 or Switch Unit NG 3-1-2.
Page 48
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 3-1-3. PICTURE NG PICTURE NG PICTURE NG All input have problem BT2 Board NG Backlight on? BT2 Board GT3, G4T Board NG UI of some picture setting correct? LVDS harness connection or BT2 board or Panel NG Set correctly or reset by menu –...
Page 49
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 3-2. Board Replacement Order 3-2-1. LED 2x or 4x BLINKING LED 2x or 4 x BLINKING Replace(OK) GT3 or Finish Replace BT2 3-2-2. LED 8x BLINKING LED 8x BLINKING Replace(OK) Speaker Replace BT2 Finish –...
Page 50
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W 3-2-3. LED 6x BLINKING LED 6x BLINKING Replace(OK) GT3 or Replace(OK) Replace Panel Module Finish 3-2-4. LED 7x BLINKING LED 8x BLINKING Replace(OK) Finish Replace Panel Module – 50 –...
Page 51
SUPPLEMENT-2 EX2T CHASSIS MODEL COMMANDER DEST. MODEL COMMANDER DEST. KLV-26S550A RM-GA016 & GE, India, Sogul, Iran, RM-GA016W Saudi Arabia, Singapore, ARM, Indonesia, Philippines, Russia, South Africa, Thailand Vietnam. SUBJECT : Part Information Change: Addition of: i) Stand Assy ii) Fall lock belt bag assy This supplement shows only variant information for the new model(s).
Page 52
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W SECTION 8 EXPLODED VIEWS 8-1. KLV-26S550A 8-1-1. REAR CABINET AND STAND ASSY REF. NO. PART NO. DESCRIPTION REMARK X-2349-157-1 STAND ASSY (M1) (26S550A (INDIA, PHILIPINES, THAILAND, VIETNAM)) – 52 –...
Page 53
KLV-32S530A, 26, 32, 37 S550A RM-GA016 RM-GA016W SECTION 9 ELECTRICAL PARTS LIST REF NO. PART NO. DESCRIPTION REMARK X-2348-140-2 BAG ASSY, FALL LOCK BELT (26S550A) – 53 –...
Page 54
KLV-32S530A, 26, 32, 37 S550A RM-GA016 SUPPLEMENT-3 EX2T CHASSIS MODEL COMMANDER DEST. MODEL COMMANDER DEST. KLV-32S550A/L RM-GA016 Hong Kong, KLV-32S530A RM-GA016 SOGUL, Thailand (Blue) Malaysia, SOGUL, Iran, Saudi Arabia, KLV-32S550A RM-GA016 Hong Kong, Singapore, ARM, Malaysia, India, Iran, Indonesia, SOGUL, Phillipines, Vietnam Saudi Arabia, South Africa...
This supplement shows only variant information for the new model(s). Other information remains the same as in the original issue. SECTION 4: DISASSEMBLY 4-1. KLV-26S550A/1, 26S550A/3 4-1-1. R2 Board and Rear Cover Removal (Refer Page 8) Remove R Bracket (Top)
Page 58
KLV-26, 32, 37 S550A RM-GA016 4-2. KLV-32S550A/1, 32S550A/3 4-2-1. R2 and Rear Cover Removal (refer page 9) Remove R Bracket (Top) Two screws (+BVTP 3 X 14) Disconnect CN001 R2 Board Two screw Three screws (+PSW M3 X 5) (+BVTP 3 X 12) Twelve screws (BVTP2 4 X 16) Two screw...
Page 59
KLV-26, 32, 37 S550A RM-GA016 SECTION 5 SERVICE ADJUSTMENT (refer page 21) Preset "Test" button on remote commander 6. The following menu appears on the screen. Function Settings 1. Press the following buttons simultaneously on the Hotel Mode remote commander RM-GA016 for a few seconds. TV / Remote Controls Both Controls Freeze...
KLV-26, 32, 37 S550A RM-GA016 Disable Hotel Menu Mode 1. While TV set is on standby, press the following sequence on the remote commander(RM-GA016). TEST On screen POWER Red Button Volume (-) display 2. Press 'Menu' on the remote commander. 3.
Page 61
KLV-26, 32, 37 S550A RM-GA016 7-3. CIRCUIT BOARD LOCATION 7-3-1 KLV-26S550A/1, 26S550A/3 (refer page 32) R2 Board (In actual case, R2 board is attached at Rear Cover) 7-3-2 KLV-32S550A/1, 32S550A/3 (refer page 32) R2 Board (In actual case, R2 board is attached at Rear Cover) –...
Page 62
KLV-26, 32, 37 S550A RM-GA016 7-3-3 KLV-37S550A/1, 37S550A/3 (refer page 33) R2 Board (In actual case, R2 board is attached at Rear Cover) – 62 –...
Page 63
KLV-26, 32, 37 S550A RM-GA016 7-4. SCHEMATIC DIAGRAM 7-5. PRINTED WIRING BOARDS (refer page 34) Board Function Note Hotel Mode Due to complexity of the board, performing component level field repairs are not recommended. Complete board replacement is required if service is necessary.
Specifications Model name KLV-37S550A KLV-32S550A KLV-32S530A KLV-26S550A System LCD (Liquid Crystal Display) Panel Panel System TV System B/G, I, D/K, M Colour System PAL, PAL60, SECAM, NTSC4.43, NTSC3.58 Channel Coverage B/G: VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41...