hit counter script

ECG WSS-1 User Manual

Wireless digital pan & tilt

Advertisement

Quick Links

ECG
®
WIRELESS DIGITAL PAN & TILT
SURVEILLANCE SYSTEM
Model No. : WSS-1

USER MANUAL

Please read this user manual carefully before using this product!

Advertisement

Table of Contents
loading

Summary of Contents for ECG WSS-1

  • Page 1: User Manual

    ® WIRELESS DIGITAL PAN & TILT SURVEILLANCE SYSTEM Model No. : WSS-1 USER MANUAL Please read this user manual carefully before using this product!
  • Page 2: Packing List

    2.4 GHz Wireless Receiver (1) Power Adapters (2) AV Cable (1) Earphone (1) 2.5 to 3.5mm Earphone Adapter Antenna (1) *WSS-1= WSS-2 (Camera) + WSS-3 (Receiver) **WSS-6 = Ceiling/Wall Camera Mounting Bracket (sold seperately) Structure: Infrared LEDs CMOS Imaging Sensor...
  • Page 3: Installation Diagram

    Earphone Jack* Channel Sync Indicator (second LED) Antenna Volume Indicator Volume Control LCD Screen Brightness Control Control Button Channel Button Camera Lens Zoom Button Direction Pad Power Switch *Power Jack Battery Cover A/V Output Stand *2.5 to 3.5mm Adapter Included Installation Diagram: Camera Power...
  • Page 4: Installation

    ® WSS-1 Installation: Attach the antenna to the antenna plug at the back of the camera by screwing it in place. Then place the camera on a flat, stable surface. Connect one of the provided power adapters to the power jack and then into a power outlet, then slide the power switch to the ON position.
  • Page 5 receiver, with proper orientation as indicated on the battery compartment. If the receiver is left unused for an extended period of time, please disconnect it from the power adapter or remove batteries if they have been installed. Channel Synchronization (*for adding additional cameras only): Press and hold the Channel button on the receiver until the Learn- ing indicator flashes, and then press the Learning button on the back of the camera while the indicator flashes (about 8 seconds)
  • Page 6 ® WSS-1 Zooming: You can enlarge the picture seen on the receiver by two (2) times by pressing the ZOOM button once: press again to return to normal viewing mode. Channel Looping Setup: The receiver supports up to 4 cameras working at the same time.
  • Page 7: Specifications

    Specifications: Item Value Transmission Frequency ISM 2,400 - 2,483 MHz Transmission Power 1 7 3dBm Unobstructed Effective Range 1 ,000ft. (Min.) Spread Spectrum FHSS Modulation Mode GFSK ˚ ˚ Operating Temperature 32 F - 1 22 F Operating Humidity 1 5% - 85% Imaging Sensor Type CMOS Picture Total Pixels...
  • Page 8: Fcc Information

    Warnings: • WSS-1 should not be exposed to dripping or splashing liquid. No objects filled with liquids shall be placed on the unit. • Turn off the camera & receiver if the system is not in use.

This manual is also suitable for:

Wss-2Wss-3

Table of Contents