Page 1 Maintenance and Service Guide HP Pavilion ze2300 Notebook PC Compaq Presario M2300 Notebook PC Document Part Number: 383111-002 November 2005 This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides comprehensive information on identifying computer features, components, and spare parts;...
Page 2: Maintenance And Service Guide
Hewlett-Packard Company under license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Page 3: Table Of Contents
1 Product Description 1.1 Features ........1–2 1.2 Resetting the Computer.
Page 4 Contents 3 Illustrated Parts Catalog 3.1 Serial Number Location ..... . 3–1 3.2 Computer Major Components....3–2 3.3 Miscellaneous Plastics Kit .
Page 5 Contents 5 Removal and Replacement Procedures 5.1 Serial Number ......5–2 5.2 Disassembly Sequence Chart .
Page 6: Specifications
Contents 6 Specifications A Connector Pin Assignments B Power Cord Set Requirements C Screw Listing D Display Component Recycling Index Maintenance and Service Guide...
Page 7: Product Description
Product Description The HP Pavilion ze2300 Notebook PC 1 and the Compaq Presario M2300 Notebook PC 2 offer advanced modularity, Intel® Mobile Pentium® M and Celeron® M processors, and extensive multimedia support. HP Pavilion ze2300 and Compaq Presario M2300 Maintenance and Service Guide...
Page 8: Features
Product Description 1.1 Features ✎ Numerous references are made throughout this Maintenance and Service Guide to “full-featured” and “defeatured” computer models. A model is considered to be full-featured if it has 3 Universal Serial Bus ports and the following components: ■...
Page 9 ■ 15.0-inch XGA (1024 × 768) TFT display with over 16.7 million colors ■ 80-, 60-, or 40-GB high-capacity hard drive, varying by computer model ■ 256-MB DDR2 synchronous DRAM (SDRAM) at 400 MHz, expandable to 1.0 GB ■ Microsoft® Windows® XP Home Edition or Windows XP Professional, varying by computer model ■...
Page 10: Resetting The Computer
Product Description ■ Connectors: ❏ External monitor port ❏ Universal Serial Bus (USB) v. 2.0 (up to 3 ports) ❏ RJ-11 (modem) jack ❏ RJ-45 (network) jack ❏ Audio-out (headphone) jack ❏ Audio-in (microphone) jack ❏ Power ❏ IEEE 1394 digital port ❏...
Page 11: Power Management
3. Wait approximately 5 minutes. 4. Replace the RTC battery and reassemble the computer. 5. Connect AC power to the computer. Do not reinsert any battery packs at this time. 6. Turn on the computer. All passwords and all CMOS settings have been cleared. 1.3 Power Management The computer comes with power management features that extend battery operating time and conserve power.
Page 12: External Components
Product Description 1.4 External Components The external components on the front of the HP Pavilion ze2300 computer are shown below and described in Table 1-1. Front Components, HP Pavilion ze2300 1–6 Maintenance and Service Guide...
Page 13: Front Components
(microphone) jack Audio-out (headphone) jack Maintenance and Service Guide Table 1-1 Front Components HP Pavilion ze2300 Function Produce stereo sound. On: One or more optional internal wireless devices, such as a WLAN and/or a Bluetooth® module (select models only), are turned on.
Page 14 Product Description The external components on the front of the Compaq Presario M2300 computer are shown below and described in Table 1-2. Front Components, Compaq Presario M2300 1–8 Maintenance and Service Guide...
Page 15 (microphone) jack Audio-out (headphone) jack Maintenance and Service Guide Table 1-2 Front Components Compaq Presario M2300 Function Produce stereo sound. On: One or more optional internal wireless devices, such as a WLAN and/or a Bluetooth module (select models only), are turned on.
Page 16 Product Description The external components on the right side of the HP Pavilion ze2300 computer are shown below and described in Table 1-3. Right-Side Components, HP Pavilion ze2300 1–10 Maintenance and Service Guide...
Page 17 Maintenance and Service Guide Table 1-3 Right-Side Components HP Pavilion ze2300 Function Connect an optional USB device. Supports an optional digital memory card. Connects an optional 1394a device such as a scanner, digital camera, or digital camcorder.
Page 18 Product Description The external components on the right side of the Compaq Presario M2300 computer are shown below and described in Table 1-4. Right-Side Components, Compaq Presario M2300 1–12 Maintenance and Service Guide...
Page 19 Maintenance and Service Guide Table 1-4 Right-Side Components Compaq Presario M2300 Function Connect optional USB devices. Supports an optional digital memory card. Connects an optional 1394a device such as a scanner, digital camera, or digital camcorder.
Page 20 Product Description The external components on the left side of the HP Pavilion ze2300 computer are shown below and described in Table 1-5. Left-Side Components, HP Pavilion ze2300 1–14 Maintenance and Service Guide...
Page 21 *The computer has only one expansion port. The term expansion port 2 describes the type of expansion port. Maintenance and Service Guide Table 1-5 Left-Side Components HP Pavilion ze2300 Function Connects an AC adapter cable. Connects an optional VGA monitor or projector.
Page 22 Product Description The external components on the left side of the Compaq Presario M2300 computer are shown below and described in Table 1-6. Left-Side Components, Compaq Presario M2300 1–16 Maintenance and Service Guide...
Page 23 *The computer has only one expansion port. The term expansion port 2 describes the type of expansion port. Maintenance and Service Guide Table 1-6 Left-Side Components Compaq Presario M2300 Function Connects an AC adapter cable. Connects an optional VGA monitor or projector.
Page 24: Rear Panel Components
Product Description The external components on the rear panel of the HP Pavilion ze2300 computer are shown below and described in Table 1-7. Rear Panel Components, HP Pavilion ze2300 Item Component Battery bay Exhaust vent Ä To prevent overheating, do not obstruct vents. Do not allow a hard surface, such as a printer, or a soft surface, such as pillows, thick rugs, or clothing, to block airflow.
Page 25 The external components on the rear panel of the Compaq Presario M2300 computer are shown below an described in Table 1-8. Rear Panel Components, Compaq Presario M2300 Item Component Battery bay Exhaust vent Ä To prevent overheating, do not obstruct vents. Do not allow a hard surface, such as a printer, or a soft surface, such as pillows, thick rugs, or clothing, to block airflow.
Page 26 Product Description The computer keyboard components on the HP Pavilion ze2300 computer are shown below and described in Table 1-9. Keyboard Components, HP Pavilion ze2300 1–20 Maintenance and Service Guide...
Page 27: Keyboard Components
Keypad keys (15) num lock key Maintenance and Service Guide Table 1-9 Keyboard Components HP Pavilion ze2300 Function Perform system and application tasks. When combined with the fn key, several keys perform additional tasks as hotkeys. Enables caps lock and turns on the caps lock light.
Page 28 Product Description The computer keyboard components on the Compaq Presario M2300 computer are shown below and described in Table 1-10. Keyboard Components, Compaq Presario M2300 1–22 Maintenance and Service Guide...
Page 29 Arrow keys Keypad keys (15) num lock key Maintenance and Service Guide Table 1-10 Keyboard Components Compaq Presario M2300 Function Perform system and application tasks. When combined with the Fn key, the function keys perform additional tasks as hotkeys. Enables caps lock and turns on the caps lock light.
Page 30: Top Components
Product Description The computer top components on the HP Pavilion ze2300 are shown below and described in Table 1-11. Top Components, HP Pavilion ze2300 Item Component Left and right TouchPad buttons TouchPad Caps lock light Display switch 1–24 Table 1-11...
Page 31 HP Pavilion ze2300 (Continued) Item Component Power button Volume down button Volume mute button Mute light Volume up button Wireless button (select models only) Num lock light 6-in-1 Digital Media Slot light (select models only) TouchPad vertical scrolling region Maintenance and Service Guide...
Page 32 Product Description The top components on the Compaq Presario M2300 are shown below and described in Table 1-12. Top Components, Compaq Presario M2300 Item Component Left and right TouchPad buttons TouchPad Caps lock light Display switch 1–26 Table 1-12 Top Components...
Page 33 Compaq Presario M2300 (Continued) Item Component Wireless light (select models only) Power button Volume down button Volume up button Volume mute button Mute light Num lock light 6-in-1 Memory Reader light (select models only) TouchPad vertical and horizontal scroll regions...
Page 34: Bottom Components
Product Description The external components on the bottom of the HP Pavilion ze2300 are shown below and described in Table 1-13. Bottom Components, HP Pavilion ze2300 Item Component Battery bay Battery pack release latch Memory module compartment 1–28 Table 1-13...
Page 35 HP Pavilion ze2300 (Continued) Item Component Exhaust vents (4) Ä To prevent overheating, do not obstruct vents. Do not allow a hard surface, such as a printer, or a soft surface, such as pillows, thick rugs or clothing, to block airflow.
Page 36 Product Description The external components on the bottom of the Compaq Presario M2300 are shown below and described in Table 1-14. Bottom Components, Compaq Presario M2300 Item Component Battery bay Battery pack release latch Memory module compartment 1–30 Table 1-14...
Page 37 Compaq Presario M2300 (Continued) Item Component Exhaust vents (4) Ä To prevent overheating, do not obstruct vents. Do not allow a hard surface, such as a printer, or a soft surface, such as pillows, thick rugs, or clothing, to block airflow.
Page 38: Design Overview
Product Description 1.5 Design Overview This section presents a design overview of key parts and features of the computer. Refer to to identify replacement parts, and Replacement Procedures,” The system board provides the following device connections: ■ Memory module ■ Mini PCI communications module ■...
Page 39: Troubleshooting
Å WARNING: Only authorized technicians trained by HP should repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly-/module-level repair. Because of the complexity of the individual boards and subassemblies, do not attempt to make repairs at the component level or modifications to any printed wiring board.
Page 40: Accessing Computer Setup
Troubleshooting Accessing Computer Setup The information and settings in Computer Setup are accessed from the File, Security, Tools, and Advanced menus. 1. Open Computer Setup by turning on or restarting the computer. Press displayed in the lower-left corner of the screen. ❏...
Page 41: Selecting From The File Menu
4. To confirm the restoration, press 5. Select File > Save changes and exit, and then follow the instructions on the screen. When the computer restarts, the factory settings are restored, and any identification information you have entered is saved. Selecting from the File Menu Select System Information...
Page 42: Selecting From The Security Menu
System IDs 2–4 Table 2-2 Security Menu To Do This Enter, change, or delete an HP Administrator password. Enter, change, or delete a power-on password. ■ Enable/Disable stringent security. ■ Enable/Disable required password on restart. Enable/disable DriveLock; change a DriveLock user or master password.
Page 43: Selecting From The Tools Menu
Selecting from the Tools Menu Select HDD Self Test options Battery Information Memory Check Maintenance and Service Guide Table 2-3 Tools Menu To Do This Run a quick or comprehensive self-test on any hard drive in the system. View information about any battery packs in the computer.
Page 44: Selecting From The Advanced Menu
Troubleshooting Selecting from the Advanced Menu Select Language (or press f2) Boot options Device options 2–6 Table 2-4 Advanced Menu To Do This Change the Computer Setup language. ■ Enable/Disable MultiBoot, which sets a startup sequence that can include most bootable devices and media in the system.
Page 45: Troubleshooting Flowcharts
2.2 Troubleshooting Flowcharts Troubleshooting Flowcharts Overview Flowchart Description “Flowchart 2.1—Initial Troubleshooting” “Flowchart 2.2—No Power, Part 1” “Flowchart 2.3—No Power, Part 2” “Flowchart 2.4—No Power, Part 3” “Flowchart 2.5—No Power, Part 4” “Flowchart 2.6—No Video, Part 1” “Flowchart 2.7—No Video, Part 2” “Flowchart 2.8—Nonfunctioning Docking Device (if applicable)”...
Page 46 Troubleshooting Troubleshooting Flowcharts Overview (Continued) Flowchart Description 2.14 “Flowchart 2.14—No OS Loading, Optical Drive” 2.15 “Flowchart 2.15—No Audio, Part 1” 2.16 “Flowchart 2.16—No Audio, Part 2” 2.17 “Flowchart 2.17—Nonfunctioning Device” 2.18 “Flowchart 2.18—Nonfunctioning Keyboard” 2.19 “Flowchart 2.19—Nonfunctioning Pointing Device” 2.20 “Flowchart 2.20—No Network/Modem Connection”...
Page 47: Flowchart 2.1—Initial Troubleshooting
Flowchart 2.1—Initial Troubleshooting Begin troubleshooting. Is there power? Beeps, LEDs, or error messages? Is there video? (no boot) Is the OS loading? Is there sound? Maintenance and Service Guide Go to “Flowchart 2.2—No Power, Part 1.” Check LED board, speaker connections.
Page 48: Flowchart 2.2—No Power, Part
Troubleshooting Flowchart 2.2—No Power, Part 1 No power (power LED is off). Remove from docking device (if applicable). Power up on battery power? Power up on AC power? Power up in docking device? 1. Reseat the power cables in the docking device and at the AC outlet.
Page 49: Flowchart 2.3—No Power, Part
Flowchart 2.3—No Power, Part 2 Continued from “Flowchart 2.2—No Power, Part 1.” Visually check for debris in battery socket and clean if necessary. Power on? Check battery by recharging it, moving it to another computer, or replacing it. Power on? Done Maintenance and Service Guide Done...
Page 50: Flowchart 2.4—No Power, Part
Troubleshooting Flowchart 2.4—No Power, Part 3 Continued from “Flowchart 2.3—No Power, Part 2.” Plug directly into AC outlet. Power LED Reseat AC adapter in computer and at power source. Power on? Power outlet active? Replace power cord. Power on? 2–12 Done Done Internal or...
Page 51: Flowchart 2.5—No Power, Part
Flowchart 2.5—No Power, Part 4 Continued from “Flowchart 2.4—No Power, Part 3.” Open computer. Loose or damaged parts? Close computer and retest. Power on? Done Maintenance and Service Guide Reseat loose components and boards and replace damaged items. Replace the following items (if applicable). Check computer operation after each replacement: 1.
Page 52: Flowchart 2.6—No Video, Part
Troubleshooting Flowchart 2.6—No Video, Part 1 No video. Docking Device Stand-alone or docking device? Stand-alone Internal or external display*? Internal External Adjust brightness. Video OK? Replace the following one at a time. Test after each replacement. Check for bent pins on cable. Video OK? Done 2–14...
Page 53: Flowchart 2.7—No Video, Part
Flowchart 2.7—No Video, Part 2 Continued from “Flowchart 2.6—No Video, Part 1.” Remove computer from dock- ing device, if connected. Adjust display brightness. Video OK? Check that computer is properly seated in docking device, for bent pins on cable, and for monitor connection. Video OK? Adjust external monitor display.
Page 54 Troubleshooting Flowchart 2.8—Nonfunctioning Docking Device (if applicable) Nonfunctioning docking device. Reseat power cord in docking device and power outlet. Check voltage setting on docking device. Reset monitor cable connector at docking device. Docking device operating? Remove computer, replace docking device. 2–16 Reinstall computer into dock-...
Page 55: Flowchart 2.9—No Operating System (Os) Loading
Flowchart 2.9—No Operating System (OS) Loading No OS loading.* Reseat power cord in docking device and power outlet. *NOTE: Before beginning troubleshooting, always check cable connections, cable ends, and drives for bent or damaged pins. Maintenance and Service Guide No OS loading from hard drive, go to “Flowchart 2.10—No OS Loading, Hard Drive, Part 1.”...
Page 56 Troubleshooting Flowchart 2.10—No OS Loading, Hard Drive, Part 1 OS not loading from hard drive. Nonsystem disk message? Reseat external hard drive. OS loading? Boot from Check the setup utility for correct booting order. Boot from hard drive? Done 2–18 Go to “Flowchart 2.11—No OS Load-...
Page 57 Flowchart 2.11—No OS Loading, Hard Drive, Part 2 Continued from “Flowchart 2.10—No OS Loading, Hard Drive, Part 1.” 1. Replace Disc or diskette in 2. Replace drive? Remove disc or diskette and reboot. Boot from hard drive? Boot 2.13—No OS from diskette Loading, Dis- drive?
Page 58 Troubleshooting Flowchart 2.12—No OS Loading, Hard Drive, Part 3 Continued from “Flowchart 2.11—No OS Load- ing, Hard Drive, Part 2.” System files on hard drive? Virus hard drive? Run SCANDISK and check for bad sectors. Can bad sectors be fixed? Fix bad sectors.
Page 59: Flowchart 2.13—No Os Loading, Diskette Drive
Flowchart 2.13—No OS Loading, Diskette Drive OS not loading from diskette drive. Nonsystem disk message? Boot from another device? Diskette drive enabled in the Setup utility? Is diskette drive boot order cor- rect? Change boot priority using the setup utility. Maintenance and Service Guide Reseat diskette drive.
Page 60 Troubleshooting Flowchart 2.14—No OS Loading, Optical Drive No OS loading from CD-ROM or DVD-ROM drive. Boots from CD or DVD? Reseat drive. 2–22 Disc in drive? Install Try another bootable disc. bootable disc. Done Boots from CD or DVD? Booting from another 2.17—Nonfunction- device?
Page 61 Flowchart 2.15—No Audio, Part 1 No audio. Computer in docking device (if applicable)? Go to “Flowchart 2.16—No Audio, Part 2.” 2.17—Nonfunctioning Maintenance and Service Guide Turn up audio internally or externally. Undock Replace the following docking device compo- nents one at a time, as applicable. Check audio status after each change.
Page 62 Troubleshooting Flowchart 2.16—No Audio, Part 2 Continued from “Flowchart 2.15—No Audio, Part 1.” Audio driver in OS configured? Correct drivers for application? Connect to external speaker. Audio? 2–24 Reload audio drivers. Load drivers and set configuration in OS. Replace audio board and speaker connections...
Page 63 Flowchart 2.17—Nonfunctioning Device Unplug the nonfunctioning device from the computer and inspect cables and plugs for bent or broken pins Clear CMOS. Reattach device. Close computer, plug in power, and reboot. Device boots properly? Done Maintenance and Service Guide Nonfunctioning device.
Page 64 Troubleshooting Flowchart 2.18—Nonfunctioning Keyboard Keyboard not operating prop- erly. Connect computer to good external key- board. External device works? Reseat internal key- board connector (if applicable). Keyboard operating properly? Done 2–26 Replace system board. Replace internal keyboard or cable. Keyboard operating properly? Replace...
Page 65 Flowchart 2.19—Nonfunctioning Pointing Device Pointing device not operating properly. Connect computer to good external pointing device. External device works? Reseat internal pointing device connector (if applicable). Pointing device operating properly? Done Maintenance and Service Guide Replace system board. Replace internal pointing device or cable.
Page 66 Troubleshooting Flowchart 2.20—No Network/Modem Connection No network or modem connec- tion. Network or modem jack or have jack acti- active? Digital line? NIC/modem drivers and recon- configured in OS? Disconnect all power from the computer and open. Reseat NIC/modem (if applicable). 2–28 Replace jack vated.
Page 67: Illustrated Parts Catalog
Illustrated Parts Catalog This chapter provides an illustrated parts breakdown and a reference for spare part numbers and option part numbers. 3.1 Serial Number Location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer.
Page 68: Computer Major Components
Illustrated Parts Catalog 3.2 Computer Major Components Computer Major Components, HP Pavilion ze2300 3–2 Maintenance and Service Guide...
Page 69 Display assemblies (include wireless antenna transceivers and cables) 15.0-inch, XGA TFT with BrightView, for use on HP Pavilion ze2300 models 15.0-inch, XGA TFT, for use on HP Pavilion ze2300 M2300 models 15.0-inch, XGA TFT with BrightView, for use on Compaq Presario M2300 models 15.0-inch, XGA TFT, for use on Compaq Presario...
Page 70 Illustrated Parts Catalog Computer Major Components, Compaq Presario M2300 3–4 Maintenance and Service Guide...
Page 71 Denmark Europe and The Netherlands France French Canada Germany Greece Israel Italy Korea Norway For use on Compaq Presario M2300 models in: Europe and The Netherlands Korea Latin America Maintenance and Service Guide Table 3-1 381068-A41 Portugal 381068-201 Saudi Arabia...
Page 72 Illustrated Parts Catalog Computer Major Components, HP Pavilion ze2300 3–6 Maintenance and Service Guide...
Page 73 Spare Parts: Computer Major Components (Continued) Item Description Top covers (include TouchPad) For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models Speaker assemblies For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models Bluetooth modules...
Page 74 Illustrated Parts Catalog Computer Major Components, Compaq Presario M2300 3–8 Maintenance and Service Guide...
Page 75 Battery connector board System board (includes disk cell RTC battery) Base enclosures For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models Hard drives (include frame and connector) 5400-rpm, 40 GB 4200-rpm, 80 GB 4200-rpm, 60 GB...
Page 76 Illustrated Parts Catalog Computer Major Components, HP Pavilion ze2300 3–10 Maintenance and Service Guide...
Page 77 Item Description Miscellaneous Plastics Kit For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models Includes: Hard drive cover (includes two captive screws) Memory module compartment cover (includes 2 captive screws) Mini PCI compartment cover (includes 2 captive screws)
Page 78 Illustrated Parts Catalog Computer Major Components, Compaq Presario M2300 3–12 Maintenance and Service Guide...
Page 79 For use on HP Pavilion ze2300 models: 8X DVD-ROM drive 24X DVD/CD-RW Combo Drive 8X DVD±RW/R and CD-RW Dual Layer Combo Drive For use on Compaq Presario M2300 models: 8X DVD-ROM drive 24X DVD/CD-RW Combo Drive 8X DVD±RW/R and CD-RW Dual Layer Combo Drive Battery packs 12-cell, 8.8-AHr...
Page 80: Miscellaneous Plastics Kit
Illustrated Parts Catalog 3.3 Miscellaneous Plastics Kit Miscellaneous Plastics Kit 3–14 Maintenance and Service Guide...
Page 81 Spare Part Number Information Item Description Miscellaneous Plastics Kit For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models Includes: Memory module compartment cover Mini PCI compartment cover Hard drive cover PC Card slot space saver and computer feet...
Page 82: Mass Storage Devices
Illustrated Parts Catalog 3.4 Mass Storage Devices Mass Storage Devices 3–16 Maintenance and Service Guide...
Page 83 For use on HP Pavilion ze2300 models: 8X DVD-ROM drive 24X DVD/CD-RW Combo Drive 8X DVD±RW/R and CD-RW Dual Layer Combo Drive For use on Compaq Presario M2300 models: 8X DVD-ROM drive 24X DVD/CD-RW Combo Drive 8X DVD±RW/R and CD-RW Dual Layer Combo Drive...
Page 84: Miscellaneous (Not Illustrated)
Audio Y cable 2 HP backpack HP remote control Logo Kits For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models Notebook entertainment cable 2 USB travel mouse Wired headset with volume control 65-watt AC adapter Screw Kit (includes the following screws;...
Page 85: Spare Part
Miscellaneous (not illustrated) Spare Part Information (Continued) Description Power cords, for use in: Australia and New Zealand Belgium, Europe, Finland, France, Germany, Greece, the Netherlands, Norway, Portugal, Spain, and Sweden Brazil Canada, French Canada, Latin America, Thailand, and The United States Denmark Hong Kong and the United Kingdom Israel...
Page 86: Sequential Part Number Listing
Keyboard for use on Compaq Presario M2300 models in the Netherlands 367777-AB1 Keyboard for use on Compaq Presario M2300 models in Taiwan 367777-AD1 Keyboard for use on Compaq Presario M2300 models in Korea 371693-001 Wired headset with volume control 371694-001 HP remote control 371790-001...
Page 87 Sequential Spare Part Number Listing (Continued) Spare Part Number Description 373026-001 Mini PCI communications module, 802.11b/g Intel (for use in the rest of the world) 373047-001 Mini PCI communications module, 802.11b/g Broadcomm (for use in most of the world) 373048-001 Mini PCI communications module, 802.11b/g Broadcomm (for use in the rest of the world) 373979-001...
Page 88 Display assembly, 15.0-inch, XGA TFT, for use on Compaq Presario M2300 models (includes wireless antenna transceivers and cables) 381068-001 Keyboard for use on HP Pavilion ze2300 models in Asia Pacific, Australia, Canada, Hong Kong, the People’s Republic of China, and the United States 381068-031...
Page 89 Number Description 381068-201 Keyboard for use on HP Pavilion ze2300 models in Brazil 381068-331 Keyboard for use on HP Pavilion ze2300 models in Europe and The Netherlands 381068-A41 Keyboard for use on HP Pavilion ze2300 models in Belgium 381068-AB1 Keyboard for use on HP Pavilion ze2300 models in Taiwan...
Page 90 382416-001 USB/S-Video controller board 382417-001 Display hinge brackets for use on HP Pavilion ze2300 models 382418-001 Hinge covers (for use only on Compaq Presario M2300 models) 382907-001 LED board for use on Compaq Presario M2300 models (includes cable) 383189-001 Speaker assembly for use on Compaq Presario M2300 models...
Page 91 TI 802.11 b/g WLAN module, for use in most of the world 392591-001 TI 802.11 b/g WLAN module, for use in the rest of the world 394452-001 Display assembly, 15.0-inch, XGA TFT, for use on HP Pavilion ze2300 models (includes wireless antenna transceivers and cables) 394453-001...
Page 92 Illustrated Parts Catalog Sequential Spare Part Number Listing (Continued) Spare Part Number Description 395143-001 Keyboard cover for use with HP Pavilion ze2300 models with wireless capability 395145-001 Keyboard cover for use with HP Pavilion ze2300 models without wireless capability 395436-001...
Page 93: Removal And Replacement Preliminaries
Removal and Replacement This chapter provides essential information for proper and safe removal and replacement service. 4.1 Tools Required You will need the following tools to complete the removal and replacement procedures: ■ Magnetic screwdriver ■ Phillips P0 screwdriver ■ Flat-bladed screwdriver ■...
Page 94: Service Considerations
Removal and Replacement Preliminaries 4.2 Service Considerations The following sections include some of the considerations that you should keep in mind during disassembly and assembly procedures. ✎ As you remove each subassembly from the computer, place the subassembly (and all accompanying s) away from the work area to prevent damage.
Page 95: Preventing Damage To Removable Drives
4.3 Preventing Damage to Removable Drives Removable drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a removable drive, or loss of information, observe the following precautions: ■ Before removing or inserting a hard drive, shut down the computer.
Page 96: Preventing Electrostatic Damage
Removal and Replacement Preliminaries 4.4 Preventing Electrostatic Damage Many electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, the discharge contains enough power to alter device parameters or melt silicon junctions.
Page 97: Packaging And Transporting Precautions
4.5 Packaging and Transporting Precautions Use the following grounding precautions when packaging and transporting equipment: ■ To avoid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes. ■ Protect all electrostatic-sensitive parts and assemblies with conductive or approved containers or packaging. ■...
Page 98: Workstation Precautions
Removal and Replacement Preliminaries 4.6 Workstation Precautions Use the following grounding precautions at workstations: ■ Cover the workstation with approved static-shielding material (refer to ■ Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. ■...
Page 99 Other grounding equipment recommended for use in preventing electrostatic damage includes: ■ Antistatic tape ■ Antistatic smocks, aprons, and sleeve protectors ■ Conductive bins and other assembly or soldering aids ■ Nonconductive foam ■ Conductive tabletop workstations with ground cords of one megohm resistance ■...
Page 100: Typical Electrostatic Voltage Levels
Removal and Replacement Preliminaries Table 4-1 shows how humidity affects the electrostatic voltage levels generated by different activities. Typical Electrostatic Voltage Levels Event Walking across carpet Walking across vinyl floor Motions of bench worker Removing DIPS from plastic tube Removing DIPS from vinyl tray Removing DIPS from Styrofoam Removing bubble pack from PCB Packing PCBs in foam-lined box...
Page 101: Removal And Replacement Procedures
Removal and Replacement This chapter provides removal and replacement procedures. There are 66 screws, in 8 different sizes, that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement.
Page 102: Serial Number
Removal and Replacement Procedures 5.1 Serial Number Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the computer. Serial Number Location 5–2 Maintenance and Service Guide...
Page 103: Disassembly Sequence Chart
5.2 Disassembly Sequence Chart Use the chart below to determine the section number to be referenced when removing computer components. Disassembly Sequence Chart Section Description Preparing the Computer for Disassembly Battery pack Hard Drive Computer Feet Optical Drive Memory Module Mini PCI Communications Module Ä...
Page 104 5.23 System Board 5–4 # of Screws Removed HP Pavilion ze2300 = 4 Compaq Presario M2300 = 6 HP Pavilion ze2300 = 23 Compaq Presario M2300 = 25 1 loosened HP Pavilion ze2300 = 2 Compaq Presario M2300 = 4...
Page 105: Preparing The Computer For Disassembly
5.3 Preparing the Computer for Disassembly Before you begin any removal or installation procedures: 1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system. 2.
Page 106: Hard Drive
Removal and Replacement Procedures b. Slide and hold the battery release latch 1 to the left. (The front edge of the battery pack disengages from the computer.) c. Lift the front edge of the battery pack 2 up and swing it back.
Page 107 ✎ The hard drive cover is included in the Miscellaneous Plastics Kits, spare part numbers 382400-001 (for use on HP Pavilion ze2300 models) and 382401-001 (for use on Compaq Presario M2300 models). Removing the Hard Drive Cover Maintenance and Service Guide Removal and Replacement Procedures 5–7...
Page 108 Removal and Replacement Procedures 5. Grasp the mylar tab 1 and lift the hard drive until it disconnects from the computer. 6. Remove the hard drive 2 from the hard drive bay. Removing the Hard Drive 5–8 Maintenance and Service Guide...
Page 109 7. Remove the four PM2.5×4.0 screws 1 that secure the hard drive frame to the hard drive. 8. Lift the frame 2 up to remove if from the hard drive. 9. Slide the hard drive connector 3 toward you and remove it. Removing the Hard Drive Frame and Connector Reverse the above procedure to reassemble and install the hard drive.
Page 110: Computer Feet
Removal and Replacement Procedures 5.5 Computer Feet The computer feet are adhesive-backed rubber pads. The feet are available using spare part number 408482-001. The feet attach to the base enclosure as illustrated below. Replacing the Computer Feet 5–10 Maintenance and Service Guide...
Page 111: Optical Drive
For use on HP Pavilion ze2300 models: 8X DVD-ROM drive 24X DVD/CD-RW Combo Drive 8X DVD±RW/R and CD-RW Dual Layer Combo Drive For use on Compaq Presario M2300 models: 8X DVD-ROM drive 24X DVD/CD-RW Combo Drive 8X DVD±RW/R and CD-RW Dual Layer Combo Drive 1.
Page 112 Removal and Replacement Procedures 2. Remove the PM2.0×7.0 screw 1 that secures the optical drive to the computer. 3. Insert a thin tool, such as a paper clip 2, into the media tray release hole. (The optical drive media tray releases from the optical drive.) 4.
Page 113: Memory Module
5.7 Memory Module Memory Module Spare Part Number Information 512-MB 256-MB 128-MB 1. Prepare the computer for disassembly (refer to Maintenance and Service Guide Removal and Replacement Procedures Section 381395-001 381394-001 403573-001 403572-001 5.3). 5–13...
Page 114 ✎ The memory module compartment cover is included in the Miscellaneous Plastics Kits, spare part numbers 382400-001 (for use on HP Pavilion ze2300 models) and 382401-001 (for use on Compaq Presario M2300 models). Removing the Memory Module Compartment Cover 5–14...
Page 115 6. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module. (The right side of the module rises away from the computer.) 7. Slide the module 2 away from the socket at an angle. ✎...
Page 116: Mini Pci Communications Module
Removal and Replacement Procedures 5.8 Mini PCI Communications Module Mini PCI Communications Module Spare Part Number Information Broadcomm 802.11b/g wireless local access network (WLAN) module for use in most of the world) Broadcomm 802.11b/g WLAN module for use in the rest of the world Intel 802.11b/g WLAN module for use in most of the world Intel 802.11b/g WLAN module for use in the rest of the world...
Page 117 ✎ The Mini PCI compartment cover is included in the Miscellaneous Plastics Kits, spare part numbers 382400-001 (for use on HP Pavilion ze2300 models) and 382401-001 (for use on Compaq Presario M2300 models). Removing the Mini PCI Compartment Cover Maintenance and Service Guide Removal and Replacement Procedures 5–17...
Page 118 Removal and Replacement Procedures ✎ Before disconnecting the cables, make note of which wireless antenna cable is attached to which antenna clip on the Mini PCI communications module. 7. Disconnect the wireless antenna cables 1 from the Mini PCI communications module. 8.
Page 119: Keyboard Cover
5.9 Keyboard Cover Keyboard Cover Spare Part Number Information For use on HP Pavilion ze2300 models with wireless capability (includes wireless button and light) For use on HP Pavilion ze2300 models without wireless capability (includes wireless button and light) For use on Compaq Presario M2300 models with wireless...
Page 120 Removal and Replacement Procedures 3. Remove the two PM2.0×8.0 screws that secure the keyboard cover to the computer. Removing the Keyboard Cover Screws 5–20 Maintenance and Service Guide...
Page 121 4. Turn the computer display-side up with the front panel toward you. 5. Open the computer as far as possible. 6. Insert a flat blade tool into the keyboard cover notches behind cover disengages from the computer. 7. Remove the keyboard cover. Removing the Keyboard Cover Reverse the above procedure to install the keyboard cover.
Page 122: Led Board
Removal and Replacement Procedures 5.10 LED Board LED Board Spare Part Number Information For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models 1. Prepare the computer for disassembly 2. Remove the keyboard cover 5–22 382415-001...
Page 123 3. Release the zero insertion force (ZIF) connector to which the keyboard cable is connected and disconnect the keyboard cable 1 from the system board. 4. Remove the two PM2.0×4.0 screws 2 that secure the LED board to the computer. 5.
Page 124: Keyboard
The Netherlands France French Canada Germany Greece Israel Italy Korea Norway For use on Compaq Presario M2300 models in: Europe and The Netherlands Korea Latin America 1. Prepare the computer for disassembly 2. Remove the keyboard cover 5–24 381068-A41 Portugal...
Page 125 Removal and Replacement Procedures 3. Remove the four PM2.0×3.0 screws that secure the keyboard to the computer. Removing the Keyboard Screws Maintenance and Service Guide 5–25...
Page 126 Removal and Replacement Procedures 4. Lift the rear edge of the keyboard and swing it toward you until it rests on the palm rest. Releasing the Keyboard 5–26 Maintenance and Service Guide...
Page 127 5. Release the ZIF connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 from the system board. 6. Remove the keyboard. Disconnecting the Keyboard Cable Reverse the above procedure to install the keyboard. Maintenance and Service Guide Removal and Replacement Procedures 5–27...
Page 128: Display Assembly
Display Assembly Spare Part Number Information 15.0-inch, XGA TFT with BrightView, for use on HP Pavilion ze2300 models 15.0-inch, XGA TFT, for use on HP Pavilion ze2300 M2300 models 15.0-inch, XGA TFT with BrightView, for use on Compaq Presario M2300 models 15.0-inch, XGA TFT, for use on Compaq Presario M2300...
Page 129 2. Turn the computer upside down with the front panel toward you. 3. Disconnect the wireless antenna cables from the Mini PCI communications module 1. 4. Remove the cables from the clip 2 in the base enclosure. Disconnecting and Removing the Wireless Antenna Cables Maintenance and Service Guide Removal and Replacement Procedures 5–29...
Page 130 Removal and Replacement Procedures 5. Turn the computer display-side up with the front toward you. 6. Open the display. 7. Disconnect the display cable 1 from the system board. 8. Remove the wireless antenna cables from the clips 2 in the top cover.
Page 131 Failure to follow this caution can result in damage to the display assembly. ✎ Steps 9 and 10 apply only to HP Pavilion ze2300 models. See steps 11 and 12 in this section for information on removing the display assembly on Compaq Presario M2300 models.
Page 132 Failure to follow this caution can result in damage to the display assembly. ✎ Steps 11 and 12 apply only to Compaq Presario M2300 models. 11. Remove the six PM2.0×7.0 screws 1 that secure the display assembly to the computer.
Page 133: Base Enclosure
5.13 Base Enclosure Base Enclosure Spare Part Number Information For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models 1. Prepare the computer for disassembly and remove the following components: a. Hard drive b. Optical drive c.
Page 134 Removal and Replacement Procedures ✎ Steps 3 through 5 apply only to HP Pavilion ze2300 models. See steps 6 through 8 in this section for information on removing the base enclosure screws on Compaq Presario M2300 models. 3. Remove the three PM2.0×8.0 screws 1 and the two PM2.0×4.0 screws 2 that secure the base enclosure to the...
Page 135 2 Seven PM2.0×8.0 screws that secure the base enclosure the computer 3 Six PM2.0×4.0 screws that secure the base enclosure the computer Removing the Base Enclosure Screws, Part 2, HP Pavilion ze2300 Models Only Maintenance and Service Guide Removal and Replacement Procedures 5–35...
Page 136 Removal and Replacement Procedures ✎ Steps 6 through 8 apply only to Compaq Presario M2300 models. 6. Remove the six PM2.0×8.0 screws 1 and the PM2.0×4.0 screw 2 that secure the base enclosure to the computer. Removing the Base Enclosure Screws, Part 1, Compaq Presario M2300 Models Only 5–36...
Page 137 8. Remove the three PM2.0×4.0 screws 1 and the fifteen PM2.0×8.0 screws 2 that secure the base enclosure to the computer. Removing the Base Enclosure Screws, Part 2, Compaq Presario M2300 Models Only Maintenance and Service Guide Removal and Replacement Procedures 5–37...
Page 138 Removal and Replacement Procedures ✎ Steps 9 and 10 apply to both HP Pavilion ze2300 and Compaq Presario M2300 models. 9. Lift the rear edge of the base enclosure 1 until it disengages from the computer. 10. Slide the base enclosure 2 back and remove it.
Page 139: Rtc Battery
5.14 RTC Battery ✎ The RTC battery is spared with the system board spare part kits. If the battery needs to be replaced, use an “ML1220” model battery. 1. Prepare the computer for disassembly and remove the following components: a. Hard drive b.
Page 140 Removal and Replacement Procedures 2. Remove the RTC battery from the socket on the system board. Removing the RTC Battery Reverse the above procedure to install the RTC battery. Make sure the battery is installed with the “+” side facing up. 5–40 Maintenance and Service Guide...
Page 141: Speaker Assembly
5.15 Speaker Assembly Speaker Assembly Spare Part Number Information For use on HP Pavilion ze2300 models For use on Compaq Presario M2300 models 1. Prepare the computer for disassembly and remove the following components: a. Hard drive b. Optical drive c.
Page 142 Removal and Replacement Procedures 2. Disconnect the speaker cable 1 from the system board. 3. Lift the speaker 2 straight up to remove it from the top cover. Removing the Speaker Assembly Reverse the above procedure to install the speaker assembly. 5–42 Maintenance and Service Guide...
Page 143: Heat Sink
Removal and Replacement Procedures 5.16 Heat Sink Heat Sink Spare Part Number Information Heat sink (includes thermal pad) 395436-001 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: a. Hard drive (Section 5.4) b. Optical drive (Section 5.6) c.
Page 144 Removal and Replacement Procedures 2. Disconnect the fan cable 1 from the system board. 3. Remove the three PM2.0×4.0 screws 2 that secure the heat sink to the top cover. 4. Remove the heat sink 3. Removing the Heat Sink Reverse the above procedure to install the heat sink.
Page 145: Fan
5.17 Fan Fan Spare Part Number Information Fan (includes thermal pad) 1. Prepare the computer for disassembly and remove the following components: a. Hard drive b. Optical drive c. Memory module compartment cover d. Mini PCI compartment cover e. Keyboard cover f.
Page 146 Removal and Replacement Procedures 3. Remove the two PM2.0×4.0 screws 1 that secure the fan to the heat sink. 4. Remove the fan 2. Removing the Fan Reverse the above procedure to install the fan. 5–46 Maintenance and Service Guide...
Page 147: Processor
5.18 Processor Processor Spare Part Number Information Intel Pentium M 750 (1.80-GHz) with 400-MHz front-side bus (FSB) Intel Pentium M 740 (1.70-GHz) with 400-MHz FSB Intel Pentium M 735A (1.70-GHz) with 400-MHz FSB Intel Pentium M 730 (1.60-GHz) with 400-MHz FSB Intel Pentium M 725A (1.60-GHz) with 400-MHz FSB Intel Celeron M 380 (1.70-GHz) with 400-MHz FSB Intel Celeron M 370 (1.50-GHz) with 400-MHz FSB...
Page 148 Removal and Replacement Procedures 2. Turn the processor locking screw 1 one-quarter turn counterclockwise until you feel a click. 3. Lift the processor 2 straight up and remove it. ✎ The gold triangle 3 on the processor should be aligned in the front right corner when you install the processor.
Page 149: Battery Connector Board
5.19 Battery Connector Board Battery Connector Board Spare Part Number Information Battery connector board 1. Prepare the computer for disassembly and remove the following components: a. Hard drive b. Optical drive c. Memory module compartment cover d. Mini PCI compartment cover e.
Page 150 Removal and Replacement Procedures 3. Remove the PM2.0×4.0 screw that secures the battery connector board to the top cover. Removing the Battery Connector Board Screw 5–50 Maintenance and Service Guide...
Page 151 4. Turn the top cover upside down with the front panel toward you. 5. Remove the PM2.0×4.0 screw 1 that secures the battery connector board to the top cover. 6. Slide the battery connector board 2 toward the rear panel until it disconnects from the system board.
Page 152: Power Connector Board
Removal and Replacement Procedures 5.20 Power Connector Board Power Connector Board Spare Part Number Information Power connector board 1. Prepare the computer for disassembly and remove the following components: a. Hard drive b. Optical drive c. Memory module compartment cover d.
Page 153 2. Remove the two PM2.0×4.0 screws 1 that secure the power connector board to the top cover. 3. Slide the power connector board 2 toward the rear panel until it disconnects it from the system board. 4. Remove the power connector board 3. Removing the Power Connector Board Reverse the above procedure to install the power connector board.
Page 154: Usb/S-Video Controller Board
Removal and Replacement Procedures 5.21 USB/S-Video Controller Board ✎ This section applies only to full-featured models. USB/S-Video Controller Board Spare Part Number Information USB/S-Video controller board 1. Prepare the computer for disassembly and remove the following components: a. Hard drive b.
Page 155 2. Remove the PM2.0×4.0 screw 1 that secures the USB/S-Video controller board to the top cover. 3. Lift up on the right side of the board 2 to disconnect it from the system board. 4. Remove the USB/S-Video controller board. Removing the USB/S-Video Controller Board Reverse the above procedure to install the USB/S-Video controller board.
Page 156: Bluetooth Module
Removal and Replacement Procedures 5.22 Bluetooth Module ✎ This section applies only to full-featured models. Bluetooth Module Spare Part Number Information Bluetooth module 1. Prepare the computer for disassembly and remove the following components: a. Hard drive b. Optical drive c.
Page 157 3. Remove the two PM1.5×3.5 screws 1 that secure the Bluetooth module to the USB/S-Video controller board. 4. Disconnect the Bluetooth module cable 2 from the USB/S-Video controller board. 5. Remove the Bluetooth module 3. Removing the Bluetooth Module Reverse the above procedure to install the Bluetooth module. Maintenance and Service Guide Removal and Replacement Procedures 5–57...
Page 158: System Board
Removal and Replacement Procedures 5.23 System Board System Board Spare Part Number Information System board ✎ All system board spares kits include a disk cell RTC battery. ✎ When replacing the system board, ensure that the following components are removed from the defective system board and installed on the replacement system board: ■...
Page 159 1. Prepare the computer for disassembly remove the following components: a. Hard drive b. Optical drive c. Keyboard cover d. LED board e. Keyboard f. Display assembly g. Base enclosure h. Speaker assembly i. Battery connector board j. Power connector board k.
Page 160 Removal and Replacement Procedures 3. Release the ZIF connector 1 to which the TouchPad cable is connected and disconnect the cable 2 from the system board. Disconnecting the TouchPad Cable 5–60 Maintenance and Service Guide...
Page 161 4. Turn the top cover upside down with the front toward you. ✎ Step 5 applies only to HP Pavilion ze2300 models. See step 6 in this section for information on removing the system board screws on Compaq Presario M2300 models.
Page 162 Removal and Replacement Procedures ✎ Step 6 applies only to Compaq Presario M2300 models. 6. Remove the four PM2.0×4.0 screws that secure the system board to the top cover. Removing the System Board Screws, Compaq Presario M2300 Models Only 5–62...
Page 163 7. Flex the left edge of the top cover 1 out until the 1394 connector 2 disengages from the top cover. 8. Lift the left side of the system board 3 until the 1394 connector is clear. 9. Flex the front edge of the top cover 4 until the audio connectors 5 and LED section 6 of the system board disengage from the top cover.
Page 164 Removal and Replacement Procedures 10. Slide the system board to the left at an angle and remove it. Removing the System Board Reverse the above procedure to install the system board. 5–64 Maintenance and Service Guide...
Page 165 This chapter provides physical and performance specifications. Dimensions HP Pavilion ze2300 Height (varies from front to back) Width Depth Compaq Presario M2300 Height (varies from front to back) Width Depth Weight (varies by configuration) HP Pavilion ze2300 Compaq Presario M2300...
Page 166 Specifications Temperature Operating Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Operating (14.7 to 10.1 psia) Nonoperating (14.7 to 4.4 psia) Shock Operating Nonoperating Random Vibration Operating Nonoperating ✎ Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this range of temperatures. 6–2 Table 6-1 Computer (Continued)
Page 167 Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Maintenance and Service Guide Table 6-2 15.0-inch, XGA, Display 22.9 cm 30.0 cm 38.1 cm Up to 16.8 million 250:1 150 nits typical 0.264 ×...
Page 168: Hard Drives
Specifications Dimensions Height Width Weight Interface type Transfer rate Synchronous (maximum) Security Seek times (typical read, including setting) Single track Average Maximum † Logical blocks Disk rotational speed Operating temperature ✎ Certain restrictions and exclusions apply. Consult Customer Care for details. *1 GB = 1 billion bytes when referring to hard drive storage capacity.
Page 169 Primary 6-cell, Li-Ion Battery Pack Dimensions Height Width Depth Weight Energy Voltage Amp-hour capacity Watt-hour capacity Temperature Operating Nonoperating Maintenance and Service Guide Table 6-4 2.00 cm 9.40 cm 13.40 cm 0.34 kg 11.1 V 4.4 Ah 48 Wh 5°C to 45°C 0°C to 60°C Specifications 0.79 in...
Page 170 Specifications DVD±RW/R and CD-RW Dual Layer Combo Drive Applicable disc Center hole diameter 1.5 cm (0.59 in) Disc diameter Standard disc Mini disc 6–6 Table 6-5 Read: DVD-R, DVD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), CD-ROM (Mode 1 and 2) CD Digital Audio CD-XA ready (Mode 2, Form 1 and 2) CD-I ready (Mode 2, Form...
Page 171 DVD±RW/R and CD-RW Dual Layer Combo Drive (Continued) Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate CD-R (24X) CD-RW (10X) CD-ROM (24X) DVD (8X) Multiword DMA mode 2 Startup time Stop time Maintenance and Service Guide Table 6-5 1.2 mm (0.047 in)
Page 172 Specifications Applicable disc Center hole diameter Disc diameter Standard disc Mini disc 6–8 Table 6-6 DVD/CD-RW Combo Drive Read: DVD-R, DVD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), CD-ROM (Mode 1 and 2) CD Digital Audio CD-XA ready (Mode 2, Form 1 and 2) CD-I ready (Mode 2, Form 1 and 2) CD-R, CD-RW...
Page 173 DVD/CD-RW Combo Drive (Continued) Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate CD-R (24X) CD-RW (10X) CD-ROM (24X) DVD (8X) Multiword DMA mode 2 Startup time Stop time Maintenance and Service Guide Table 6-6 1.2 mm (0.047 in) 0.74 µm...
Page 174 Specifications Applicable disc Center hole diameter Disc diameter Standard disc Mini disc Disc thickness 6–10 Table 6-7 8X DVD-ROM Drive DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18) CD-ROM (Mode 1 and 2) CD Digital Audio CD-XA ready (Mode 2, Form 1 and 2) CD-I ready (Mode 2, Form 1 and 2) CD-R CD-RW...
Page 175 8X DVD-ROM Drive (Continued) Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate CD-R (24X) CD-RW (10X) CD-ROM (24X) DVD (8X) Multiword DMA mode 2 Startup time Stop time Maintenance and Service Guide Table 6-7 0.74 µm CD media <...
Page 176: System Dma
Specifications Hardware DMA DMA0 DMA1 DMA2 DMA3 DMA4 DMA5 DMA6 DMA7 6–12 Table 6-8 System DMA System Function Not applicable Not applicable Not applicable Not applicable Direct memory access controller Available for PC Card Not assigned Not assigned Maintenance and Service Guide...
Page 177: System Interrupts
Hardware IRQ IRQ0 IRQ1 IRQ2 IRQ3 IRQ4 IRQ5* IRQ6 IRQ7* IRQ8 IRQ9* IRQ10* IRQ11 *Default configuration ✎ PC Card may assert IRQ3, IRQ4, IRQ5, IRQ7, or IRQ20. Maintenance and Service Guide Table 6-9 System Interrupts System Function System timer Quick Launch buttons Cascaded USB2 Enhanced Host Controller—24CD COM1...
Page 178 Specifications System Interrupts (Continued) Hardware IRQ IRQ12 IRQ13 IRQ14 IRQ15 IRQ17 IRQ17 IRQ17 IRQ19 IRQ19 IRQ19 IRQ20 IRQ20 IRQ21 IRQ21 IRQ21 IRQ22 IRQ23 *Default configuration ✎ PC Card may assert IRQ3, IRQ4, IRQ5, IRQ7, or IRQ20. 6–14 Table 6-9 System Function Synaptics PS/2 port pointing device Numeric data processor Primary IDE channel...
Page 179 I/O Address (hex) 0x00000000-0x00000CF7 0x00000000-0x00000CF7 0x00000020-0x00000021 0x0000002E-0x0000002F 0x00000040-0x00000043 0x00000060-0x00000060 0x00000061-0x00000061 0x00000062-0x00000062 0x00000064-0x00000064 0x00000066-0x00000066 0x00000070-0x00000071 0x00000072-0x00000073 0x00000080-0x0000008F 0x00000092-0x00000092 0x000000A0-0x000000A1 0x000000B0-0x000000B1 0x000000C0-0x000000DF 0x000000F0-0x000000FE 0x00000170-0x00000177 Maintenance and Service Guide Table 6-10 System I/O Addresses System Function (shipping configuration) PCI bus Direct memory access controller Programmable interrupt controller System board resources System timer...
Page 180 Specifications System I/O Addresses (Continued) I/O Address (hex) 0x000001F0-0x000001F7 0x00000220-0x0000022F 0x00000274-0x00000277 0x00000279-0x00000279 0x00000280-0x00000293 0x00000376-0x00000376 0x000003B0-0x000003BB 0x000003B0-0x000003BB 0x000003C0-0x000003DF 0x000003C0-0x000003DF 0x000003F6-0x000003F6 0x0000040B-0x0000040B 0x000004D0-0x000004D1 0x000004D6-0x000004D6 0x00000530-0x00000537 0x00000870-0x0000087F 0x00000A79-0x00000A79 0x00000C00-0x00000C01 0x00000C14-0x00000C14 0x00000C50-0x00000C52 0x00000C6C-0x00000C6C 6–16 Table 6-10 System Function (shipping configuration) Primary IDE Channel System board resources ISAPNP Read Data Port ISAPNP Read Data Port System board resources...
Page 181 System I/O Addresses (Continued) I/O Address (hex) 0x00000C6F-0x00000C6F 0x00000CD4-0x00000CD5 0x00000CD6-0x00000CD7 0x00000CD8-0x00000CDF 0x00000D00-0x0000FFFF 0x00000F40-0x00000F47 0x00001080-0x00001080 0x00008000-0x0000805F 0x00008100-0x000081FF 0x00008400-0x0000840F 0x00008410-0x0000841F 0x00009000-0x00009FFF 0x00009000-0x00009FFF 0x0000A000-0x0000A0FF 0x0000F000-0x0000FFFF 0x0000FD00-0x0000FDFF 0x0000FE00-0x0000FEFF Maintenance and Service Guide Table 6-10 System Function (shipping configuration) System board resources System board resources System board resources System board resources PCI bus...
Page 182: System Memory Map
Specifications Memory Map Address (hex) 0xD4100000-0xD41FFFFF 0xD4100000-0xD41FFFFF 0xD8000000-0xDBFFFFFF 0xD8000000-0xDBFFFFFF 0xFAC00000-0xFEBFFFFF 0xF6C00000-0xFABFFFFF 0xD4000000-0xD4000FFF 0xD4001000-0xD4001FFF 0xD4002000-0xD4002FFF 0xD4003000-0xD40033FF 0xFFF80000-0xFFFFFFFF 0xE0000000-0xE03FFFFF 0xE0000000-0xE03FFFFF 0x0000-0x0FFF 6–18 Table 6-11 System Memory Map System Function (shipping configuration) PCI standard PCI-to-PCI bridge ATI MOBILITY RADEON Xpress 200 Series PCI standard PCI-to-PCI bridge ATI MOBILITY RADEON Xpress 200 Series PCI standard PCI-to-PCI bridge PCI standard PCI-to-PCI bridge...
Page 183 System Memory Map (Continued) Memory Map Address (hex) 0xD4208000-0xD42087FF 0xD4200000-0xD4203FFF 0xD4204000-0xD4205FFF 0xFFEFF000-0xFFEFFFFF 0xFFEFE000-0xFFEFEFFF 0xF2C00000-0xF6BFFFFF 0xD4206000-0xD4207FFF 0xD4209000-0xD42090FF 0xD4208C00-0xD4208CFF 0xD4208800-0xD42088FF Maintenance and Service Guide Table 6-11 System Function (shipping configuration) Texas Instruments OHCI Compliant IEEE 1394 Host Controller Texas Instruments OHCI Compliant IEEE 1394 Host Controller Broadcomm 802.11b/g WLAN Texas Instruments PCIxx21/x515 Cardbus...
Page 184 Specifications System Memory Map (Continued) Memory Map Address (hex) 0xD4209400-0xD42094FF 0xD4003400-0xD40034FF 0xD4003800-0xD40038FF 0xFEC00000-0xFEC00FFF 0xFEE00000-0xFEE00FFF 0xA0000-0xBFFFF 0xA0000-0xBFFFF 0xA0000-0xBFFFF 0xD6000-0xD7FFF 0xDC000-0xDDFFF 0xDD000-0xDDFFF 0xE0000-0xFFFFF 0x40000000-0xFFFFFFFF 6–20 Table 6-11 System Function (shipping configuration) Realtek RTL8139/810x Family Fast Ethernet Conexant AC-Link Audio SoftV90 Data Fax Modem with SmartCP System board resources System board resources PCI bus...
Page 185: Connector Pin Assignments
Connector Pin Assignments Signal +5 VDC Data – Maintenance and Service Guide Table A-1 Universal Serial Bus Signal Data + Ground A–1...
Page 186 Connector Pin Assignments Signal Transmit + Transmit – Receive + Unused A–2 Table A-2 RJ-45 (Network) Signal Unused Receive – Unused Unused Maintenance and Service Guide...
Page 187 Signal S-VHS color (C) signal Composite video signal S-VHS intensity (Y) signal S-VHS color ground Maintenance and Service Guide Connector Pin Assignments Table A-3 S-Video-Out Signal TV-CD S-VHS intensity ground Composite video ground A–3...
Page 188: External Monitor
Connector Pin Assignments Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog A–4 Table A-4 External Monitor Signal +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock Maintenance and Service Guide...
Page 189 Signal Unused Ring Maintenance and Service Guide Table A-5 RJ-11 (Modem) Signal Unused Unused Unused Connector Pin Assignments A–5...
Page 190 Connector Pin Assignments Signal Audio signal in Audio signal in Signal Audio out, left channel Audio out, right channel A–6 Table A-6 Audio-In (Microphone) Table A-7 Audio-Out (Headphone) Signal Ground Signal Ground Maintenance and Service Guide...
Page 191: Power Cord Set Requirements
Power Cord Set Requirements 3-Conductor Power Cord Set The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 or 220 to 240 volts AC. The power cord set included with the computer meets the requirements for use in the country where the equipment is purchased.
Page 192: General Requirements
Power Cord Set Requirements General Requirements The requirements listed below are applicable to all countries. ■ The length of the power cord set must be at least 1.5 m (5.0 ft) and a maximum of 2.0 m (6.5 ft). ■ All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used.
Page 193 Country-Specific Requirements 3-Conductor Power Cord Set Requirements Country/Region Australia Austria Belgium Canada Denmark Finland France Germany Italy Japan ✎ NOTES: 1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country where it will be used.
Page 194 Power Cord Set Requirements 3-Conductor Power Cord Set Requirements (Continued) Country/Region Korea The Netherlands Norway People’s Republic of China Sweden Switzerland Taiwan United Kingdom United States ✎ NOTES: 1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm² conductor size.
Page 195: Screw Listing
All screws listed in this appendix are available in the Miscellaneous Screw Kits, spare part numbers 382402-001 (for use on HP Pavilion ze2300 models) and 382403-001 (for use on Compaq Presario M2300 models). Maintenance and Service Guide...
Page 196 Screw Listing Where used: Two screws that secure the hard drive cover to the computer (screws are captured on the cover by C clips; documented in Two screws that secure the memory module compartment cover to the computer (screws are captured on the cover by C clips; documented in Section 5.7) One screw that secures the Mini PCI compartment cover to the computer...
Page 197 Where used: 4 screws that secure the hard drive frame to the hard drive (documented in Section 5.4) Phillips PM2.5×4.0 Screw Locations Maintenance and Service Guide Table C-2 Phillips PM2.5×4.0 Screw Color Qty. Silver Screw Listing Length Thread 4.0 mm 2.5 mm Head Width...
Page 198 Screw Listing Where used: One screw that secures the optical drive to the computer (documented in Section 5.6) Phillips PM2.0×7.0 Screw Location C–4 Table C-3 Phillips PM2.0×7.0 Screw Color Qty. Black Length Thread 7.0 mm 2.0 mm Maintenance and Service Guide Head Width 4.0 mm...
Page 199 Phillips PM2.0×7.0 Screw (Continued) Where used: 4 screws that secure the display assembly on the HP Pavilion ze2300 computer (documented in Phillips PM2.0×7.0 Screw Locations Maintenance and Service Guide Table C-3 Color Qty. Length Black 7.0 mm Section 5.12) Screw Listing...
Page 200 Screw Listing Phillips PM2.0×7.0 Screw (Continued) Where used: 6 screws that secure the display assembly on the Compaq Presario M2300 computer (documented in Phillips PM2.0×7.0 Screw Locations C–6 Table C-3 Color Qty. Length Black 7.0 mm Section 5.12) Maintenance and Service Guide...
Page 201 Where used: 2 screws that secure the keyboard cover to the computer (documented in Section 5.9) Phillips PM2.0×8.0 Screw Locations Maintenance and Service Guide Table C-4 Phillips PM2.0×8.0 Screw Color Qty. Black Screw Listing Length Thread 8.0 mm 2.0 mm Head Width 4.0 mm...
Page 202 Screw Listing Phillips PM2.0×8.0 Screw (Continued) Where used: 3 screws that secure the base enclosure to the computer on the HP Pavilion ze2300 (documented in Phillips PM2.0×8.0 Screw Locations C–8 Table C-4 Color Qty. Black Section 5.13) Length Thread 8.0 mm 2.0 mm...
Page 203 Phillips PM2.0×8.0 Screw (Continued) Where used: 7 screws that secure the base enclosure to the computer on the HP Pavilion ze2300 (documented in Phillips PM2.0×8.0 Screw Locations Maintenance and Service Guide Table C-4 Color Qty. Black Section 5.13) Screw Listing...
Page 204 Screw Listing Phillips PM2.0×8.0 Screw (Continued) Where used: 6 screws that secure the base enclosure on the Compaq Presario M2300 (documented in Section Phillips PM2.0×8.0 Screw Locations C–10 Table C-4 Color Qty. Black 5.13) Length Thread 8.0 mm 2.0 mm...
Page 205 Phillips PM2.0×8.0 Screw (Continued) Where used: 15 screws that secure the base enclosure on the Compaq Presario M2300 (documented in Section Phillips PM2.0×8.0 Screw Locations Maintenance and Service Guide Table C-4 Color Qty. Black 5.13) Screw Listing Length Thread 8.0 mm 2.0 mm...
Page 206 Screw Listing Where used: 2 screws that secure the LED board to the computer (documented in Section 5.10) Phillips PM2.0×4.0 Screw Locations C–12 Table C-5 Phillips PM2.0×4.0 Screw Color Qty. Silver Length Thread 4.0 mm 2.0 mm Maintenance and Service Guide Head Width 4.0 mm...
Page 207 Phillips PM2.0×4.0 Screw (Continued) Where used: 2 screws that secure the base enclosure to the HP Pavilion ze2300 (documented in Section Phillips PM2.0×4.0 Screw Locations Maintenance and Service Guide Table C-5 Color Qty. Silver 5.13) Screw Listing Length Thread 4.0 mm 2.0 mm...
Page 208 Screw Listing Phillips PM2.0×4.0 Screw (Continued) Where used: 6 screws that secure the base enclosure to the HP Pavilion ze2300 (documented in Section Phillips PM2.0×4.0 Screw Locations C–14 Table C-5 Color Qty. Silver 5.13) Length Thread 4.0 mm 2.0 mm...
Page 209 Phillips PM2.0×4.0 Screw (Continued) Where used: One screw that secures the base enclosure to the Compaq Presario M2300 (documented in Section Phillips PM2.0×4.0 Screw Location Maintenance and Service Guide Table C-5 Color Qty. Silver 5.13) Screw Listing Length Thread 4.0 mm 2.0 mm...
Page 210 Screw Listing Phillips PM2.0×4.0 Screw (Continued) Where used: 3 screws that secure the base enclosure on the Compaq Presario M2300 (documented in Section Phillips PM2.0×4.0 Screw Locations C–16 Table C-5 Color Qty. Silver 5.13) Length Thread 4.0 mm 2.0 mm...
Page 211 Phillips PM2.0×4.0 Screw (Continued) Where used: Three screws that secure the heat sink to the computer (documented in Section 5.16) One screw that secures the battery connector board to the computer (documented in Section Two screws that secure the power connector board to the computer (documented in Section One screw that secures the USB/S-Video controller board to the computer...
Page 212 Screw Listing Phillips PM2.0×4.0 Screw (Continued) Where used: 2 screws that secure the fan to the heat sink (documented in Phillips PM2.0×4.0 Screw Locations C–18 Table C-5 Color Qty. Length Silver 4.0 mm Maintenance and Service Guide Head Thread Width 2.0 mm 4.0 mm Section...
Page 213 Phillips PM2.0×4.0 Screw (Continued) Where used: One screw that secures the battery connector board to computer (documented in Section Phillips PM2.0×4.0 Screw Location Maintenance and Service Guide Table C-5 Color Qty. Silver 5.19) Screw Listing Length Thread 4.0 mm 2.0 mm Head Width 4.0 mm...
Page 214 Screw Listing Phillips PM2.0×4.0 Screw (Continued) Where used: 2 screws that secure the system board on the HP Pavilion ze2300 (documented in Section Phillips PM2.0×4.0 Screw Locations C–20 Table C-5 Color Qty. Silver 5.23) Length Thread 4.0 mm 2.0 mm...
Page 215 Phillips PM2.0×4.0 Screw (Continued) Where used: 4 screws that secure the system board on the Compaq Presario M2300 (documented in Section Phillips PM2.0×4.0 Screw Locations Maintenance and Service Guide Table C-5 Color Qty. Silver 5.23) Screw Listing Length Thread 4.0 mm 2.0 mm...
Page 216 Screw Listing Where used: 4 screws that secure the keyboard to the computer (documented in Section 5.11) Phillips PM2.0×3.0 Screw Locations C–22 Table C-6 Phillips PM2.0×3.0 Screw Color Qty. Black Length Thread 3.0 mm 2.0 mm Maintenance and Service Guide Head Width 4.0 mm...
Page 217 Where used: 5 screws that secure the base enclosure on the HP Pavilion ze2300 (documented in Section Phillips PM2.0×16.0 Screw Locations Maintenance and Service Guide Table C-7 Phillips PM2.0×16.0 Screw Color Qty. Black 5.13) Screw Listing Length Thread 16.0 mm 2.0 mm...
Page 218 Screw Listing Where used: 2 screws that secure the Bluetooth module to the computer (documented in Section 5.22) Phillips PM1.5×3.5 Screw Locations C–24 Table C-8 Phillips PM1.5×3.5 Screw Color Qty. Silver Length Thread 3.5 mm 1.5 mm Maintenance and Service Guide Head Width 3.0 mm...
Page 219 Careful handling should be exercised when removing these components. ✎ Materials Disposal This HP product contains mercury in the display assembly backlight and may require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact...
Page 220 Display Component Recycling This appendix provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight 1 and the LCD panel 2. ✎ Disassembly procedures differ from one display assembly to another. The procedures provided in this appendix are general disassembly instructions.
Page 221 Display Component Recycling Perform the following steps to disassemble the display assembly: 1. Remove all screw covers 1 and screws 2 that secure the display bezel to the display assembly. Removing the Display Bezel Screw Covers and Screws Maintenance and Service Guide D–3...
Page 222 Display Component Recycling 2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel until the bezel disengages from the display assembly. 3. Remove the display bezel 3. Removing the Display Bezel D–4 Maintenance and Service Guide...
Page 223 Display Component Recycling 4. Disconnect all LCD panel cables 1 from the display inverter and remove the inverter 2. Removing the Display Inverter Maintenance and Service Guide D–5...
Page 224 Display Component Recycling 5. Remove all screws 1 that secure the LCD panel to the display enclosure. 6. Remove the LCD panel 2 from the display enclosure. Removing the LCD Panel D–6 Maintenance and Service Guide...
Page 225 Display Component Recycling 7. Turn the LCD panel upside down. 8. Remove all screws that secure the LCD panel frame to the LCD panel. Removing the LCD Panel Frame Screws Maintenance and Service Guide D–7...
Page 226 Display Component Recycling 9. Use a sharp-edged tool to cut the tape 1 that secures the side of the LCD panel to the LCD panel frame. 10. Remove the LCD panel frame 2 from the display panel. Removing the LCD Panel Frame D–8 Maintenance and Service Guide...
Page 227 11. Remove the screws 1 that secure the backlight cover to the LCD panel. 12. Lift the top edge of the backlight cover 2 and swing it forward. 13. Remove the backlight cover. Removing the Backlight Cover Maintenance and Service Guide Display Component Recycling D–9...
Page 228 Display Component Recycling 14. Turn the LCD panel right-side up. 15. Remove the backlight cables 1 from the clip 2 in the LCD panel. Releasing the Backlight Cables D–10 Maintenance and Service Guide...
Page 229 Display Component Recycling 16. Turn the LCD panel upside down. 17. Remove the backlight frame from the LCD panel. Removing the Backlight Frame Maintenance and Service Guide D–11...
Page 230 Display Component Recycling Å WARNING: The backlight contains mercury. Caution should be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 18. Slide the backlight out of the backlight frame. Removing the Backlight D–12 Maintenance and Service Guide...
Page 231 19. Disconnect the display cable 1 from the LCD panel. 20. Remove the screws 2 that secure the LCD panel to the LCD rear panel. 21. Release the LCD panel 3 from the LCD rear panel. 22. Release the tape 4 that secures the LCD panel to the LCD rear panel.
Page 232 Display Component Recycling 23. Remove the LCD panel. Removing the LCD Panel 24. Recycle the backlight and LCD panel. D–14 Maintenance and Service Guide...
Page 233 1394 port 1–11 6-in-1 Digital Media Slot 1–11 6-in-1 Digital Media Slot light 1–11 1–25 6-in-1 Memory Reader 1–13 6-in-1 Memory Reader light 1–13 1–27 AC adapter, spare part number 3–18 3–20 arrow keys 1–21 audio troubleshooting 2–23 audio Y cable 2, spare part number 3–18 audio-in jack location 1–7...
Page 234 Index components bottom 1–28 front 1–6 keyboard 1–20 left-side 1–14 rear 1–16 right-side 1–10 top 1–24 computer feet illustrated 3–14 locations 5–10 spare part number 3–15 3–26 Computer Setup Advanced Menu 2–6 File Menu 2–3 overview 2–1 Security Menu 2–4 Tools Menu 2–5 Computer Setup defaults 2–2 computer specifications 6–1...
Page 235 DVD-ROM drive OS loading problems 2–22 precautions 4–3 removal 5–11 spare part number 3–13 3–17 3–23 specifications 6–10 electrostatic discharge 4–4 4–8 exhaust vents 1–18 1–29 1–31 expansion port 2 1–15 external monitor port location 1–15 pin assignments A–4 removal 5–45 spare part number 3–7 3–24 5–45...
Page 236 Index heat sink removal 5–43 spare part number 3–7 3–26 5–43 hinge cover, spare part numbers 3–3 I/O address specifications 6–15 IDE drive light 1–7 interrupt specifications 6–13 keyboard removal 5–24 spare part numbers 3–5 3–20 3–22 5–24 troubleshooting 2–26 keyboard components 1–20 1–22 keyboard cover...
Page 237 modem jack location 1–15 pin assignments A–5 modem, troubleshooting 2–28 monitor port location 1–15 pin assignments A–4 mouse, spare part number 3–18 3–20 mute button 1–25 mute light 1–25 network jack location 1–15 pin assignments A–2 network, troubleshooting 2–28 nonfunctioning device, troubleshooting 2–16 notebook entertainment cable 2, spare part number 3–18...
Page 238 Index removal/replacement preliminaries 4–1 procedures 5–1 right-side components 1–10 1–12 RJ-11 jack location 1–15 pin assignments A–5 RJ-45 jack location 1–15 pin assignments A–2 Screw Kit, spare part number 3–18 3–24 screw listing C–1 SD Card memory module, spare part numbers 3–13 3–26 security cable slot 1–11 serial number 3–1...
Page 239 nonfunctioning device 2–16 2–25 OS loading 2–17 overview 2–1 pointing device 2–27 power 2–10 video 2–14 Universal Serial Bus (USB) port location 1–11 1–17 pin assignments A–1 USB digital drive, spare part number 3–17 USB travel mouse, spare part number 3–18 USB/S-Video controller board removal 5–54 spare part numbers 3–7...

This manual is also suitable for:

Pavilion ze2300 Compaq presario,presario m2301 Compaq presario,presario m2302 Compaq presario,presario m2305 Compaq presario,presario m2308 Compaq presario,presario m2310 ... Show all

HP Compaq Presario M2300 Maintenance And Service Manual

1 Product Description

2 Troubleshooting

3 Illustrated Parts Catalog

4 Removal and Replacement Preliminaries

5 Removal and Replacement Procedures

Quick Links

Troubleshooting

Related Manuals for HP Compaq Presario M2300

Summary of Contents for HP Compaq Presario M2300

This manual is also suitable for:

Table of Contents