Table of Contents
Advertisement
Cisco ASR 1000 Series Router Power Supplies
Cisco ASR 1000 Series Router Power Supplies
All Cisco ASR 1000 Series Router configurations support AC and DC power supply options. The
modular chassis configurations support the installation of two power supplies for redundancy. When an
external power supply fails or is removed, the other power supply provides power requirements for the
chassis.
You are required to always have two power supplies installed in the chassis to insure sufficient cooling
for the box. The system fans are inside the power supply unit and must spin for cooling. No Cisco
ASR 1000 Series Router will operate for more than two to three minutes without two power supplies
installed. Since all the system fans can be powered by one power supply, it is not required for the second
power supply unit to be powered on, but it must be installed. Cisco IOS software specifically looks for
two power supplies in the chassis and will automatically initiate a shutdown if only one power supply is
detected.
This section contains the following topics:
•
•
•
•
Power Supply Requirements for All Cisco ASR 1000 Series Routers
This section contains power supply specifications for the Cisco ASR 1006, ASR 1004, and ASR 1002
routers. The following topics are covered:
•
•
•
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
2-14
Power Supply Requirements for All Cisco ASR 1000 Series Routers, page 2-14
Power Supplies for Cisco ASR 1006 Router, page 2-16
Power Supplies for Cisco ASR 1004 Router, page 2-21
Power Supplies for Cisco ASR 1002 Router, page 2-26
DC power supply input ratings and circuit breaker specifications
–
Maximum and minimum Amps for the branch circuit breakers
Maximum and minimum size of the AWG wire required for each circuit breaker.
–
AC and DC power supply types
AC and DC power supply ratings
Chapter 2
Cisco ASR 1000 Series Routers Components
OL-13208-01
Advertisement
Table of Contents
