Page 1: Quick Start Guide
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DNX891HD/ DNX7710BT/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX/ DNX5710BT...
Page 2: Table Of Contents
How to Make a Phone Call ........15 • In this manual, each model name is abbreviated as follows. Installation ..............17 DNX8 – DNX891HD: DNX7 – DNX7710BT, DNX771HD: About this Unit ............25 DNX6 – DNX691HD: DNX5 –...
Page 3: Precautions
• When you purchase optional accessories, check play. In such a situation, remove the disc and wait with your Kenwood dealer to make sure that they for the condensation to evaporate. If the unit still work with your model and in your area.
Page 4: Acquiring Gps Signal
Acquiring GPS signal How to reset your unit The ﬁrst time you turn on this unit, you must wait If the unit fails to operate properly, press the Reset while the system acquires satellite signals for the button. The unit returns to the factory settings. ﬁrst time.
Page 5: Information
Neither other factors that may aﬀect safety or timing while Kenwood nor Garmin shall be liable for problems driving. or accidents resulting from failure to observe the Use the navigation system only as a navigational aid.
Page 6: First Step
Various setup screens appear automatically before scanning color. (Instruction Manual P.99) using. After setting, touch [ Initial setup EXT SW (DNX891HD, DNX7710BT only) Control the external devices. (Instruction Manual When you first turn on the unit, the screen of the P.104) configuration setting will appear.
Page 7: Ipod/Iphone Connection Setup
iPod/iPhone connection setup Application link setup When you first select iPod as a source, the setting When you first select Apps as a source, the setting screen of the iPod/iPhone connection will appear. screen for the connection with the device installed the apps will appear.
Page 8: Functions Of The Buttons On The Front Panel
Functions of the Buttons on the Front Panel DNX891HD/ DNX7710BT/ DNX771HD Name/Motion Name/Motion 6 TEL (Reset) • If the unit or the connected unit fails to • Displays the Hands Free screen (Instruction operate properly, the unit returns to factory Manual P.85).
Page 9 DNX691HD/ DNX571HD/ DNX571EX/ DNX5710BT Name/Motion Name/Motion 1 Disc insert slot 7 TEL • A slot to insert a disc media. • Displays the Hands Free screen (Instruction Manual P.85). • Pressing for 1 second displays the Voice • Ejects the disc. Recognition screen.
Page 10: Common Operations
Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. (DNX891HD, DNX7710BT only) : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source.
Page 11: How To Use The Navigation System
Garmin and JVC KENWOOD will not be responsible for any traﬃc ﬁnes or citations that you may receive for failing to follow all applicable traﬃc laws and signs.
Page 12 1) While navigating a route, touch [ ] and You can purchase updated map data from then touch [Where To?]. Garmin or ask your Kenwood dealer or 2) Search for the extra stop. Kenwood service center for details. 3) Touch [Go!].
Page 13: How To Play Music
✎ NOTE How to Play Music • For the details of the necessary cable and adapter to connect with iPod/iPhone, refer to You can play audio files from music CD, disc media, “iPod/iPhone connection” (P.26). USB storage device and iPod. To disconnect the iPod/iPhone ✎...
Page 14: How To Play Movie/Picture
Operation (P.39) in the Instruction Manual. Searches the previous/next content. How to Play Movie/Picture or move the cursor in the center You can play DVD video, Video CD (VCD), movie files Fast forwards or Fast backwards (Disc media, from disc media, iPod and picture files from USB CD, USB device only).
Page 15: Siriusxm
✎ NOTE Recalling the preset station • For operations on the source control screen, see 1) Touch [P#]. How to Play Music (P.13). You can also display the preset list by However, searching by category/link/album artwork touching the frequency display in the center. ✎...
Page 16 1) Touch [ ] (incoming calls), [ ] (missed calls), or [ ] (outgoing calls). 2) Select the phone number from the list. 3) Touch [ Call using the phonebook 1) Touch [ 2) Select the name from the list. 3) Select the number from the list.
Page 17: Installation
• Insulate unconnected wires with vinyl tape or other Installation similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected Before Installation wires or the terminals. • Connect the speaker wires correctly to the terminals to Before installation of this unit, please note the which they correspond.
Page 18 (3 m) Japanese cars 7 or 8 Car Bracket DNX891HD, DNX7710BT, DNX771HD only DNX891HD only 7 or 8 ✎ NOTE • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).
Page 19 1) Attach accessory 9 to the unit. 1) Cut out accessory 5 as illustrated. Cutting line General Motors cars (DNX891HD) 1) Cut out accessory 5 to meet the shape of the opening of the center console. 2) Attach accessory 5 to the unit.
Page 20 GPS antenna Microphone unit GPS antenna is installed inside of the car. It should 1) Check the installation position of the microphone (accessory =). be installed as horizontally as possible to allow easy reception of the GPS satellite signals. 2) Clean the installation surface. To mount the GPS antenna inside your vehicle: 3) Remove the separator of the microphone (accessory =), and stick the microphone to the...
Page 21 Removing the trim plate Removing the unit 1) Engage the catch pins on the extraction key 1) Remove the trim plate by referring to step 1 in (accessory4) and remove the two locks on the “Removing the trim plate”. lower level. 2) Insert the two extraction key (accessory4) Lower the trim plate (accessory9) and pull it deeply into the slots on each side, as shown.
Page 22: System Connection
Green/Red To CMOS-3xx series (Optional Accessory) Blue/Red To Relay Box. camera control terminal (DNX891HD, DNX7710BT only) If no connections are made, Green/White (DNX891HD, DNX7710BT, do not let the cable come out DNX771HD only) RELAY from the tab.
Page 23: Connecting Wires To Terminals
Connecting wires to terminals Fuse (10A) Fuse (10A) Ignition key switch Accessory 1 Red (Ignition wire) White/Black Yellow (Battery wire) To front left speaker Car fuse White Car fuse Black (Ground wire) (Main fuse) (To car chassis) Gray/Black To front right speaker Gray Battery...
Page 24: Optional Accessory Connection
HDMI/MHL terminal, remove iPod/ AV-IN2 (CA-C3AV; Optional Accessory) the ﬁxture. After connecting the input cable, put the ﬁxture again. iDatalink connector (DNX891HD/ DNX771HD/ HDMI/ MHL connector DNX691HD/ DNX571HD/ DNX571EX only) SiriusXM Connect Vehicle Tuner connector (DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX only) ✎...
Page 25: About This Unit
Bluetooth SIG, Inc. and any use of such marks by • ABOUT DIVX VIDEO: DivX® is a digital video JVC KENWOOD Corporation is under license. Other format created by DivX, LLC, a subsidiary of Rovi trademarks and trade names are those of their Corporation.
Page 26: Ipod/Iphone Connection
• The terms HDMI and HDMI High-Deﬁnition Android connection Multimedia Interface, and the HDMI logo are To connect the Android device with this unit, trademarks or registed trademarks of HDMI the cable (sold separately) and the profile which Licensing LLC in the United States and other your Android device supports are necessary as countries.
Page 27: Connectable Ipod/Iphone
applications can be controlled from this unit. The NOTE operable functions depend on the application. • In the application on your device, log in and create Refer to “Apps Operation” (P.51) in the Instruction an account with Pandora. Manual. • (If you are not already a registered user, an account •...
Page 28 DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ Location: Top plate DNX571EX: DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ FCC WARNING DNX571EX: IC (Industry Canada) Notice This equipment may generate or use radio frequency energy. Changes or modiﬁcations to this This device complies with Industry Canada licence- equipment may cause harmful interference unless exempt RSS standard(s).
Page 29 CALIFORNIA, USA This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con...
Page 31 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Page 32 What Do You Want To Do? Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM. In this manual, you will learn various convenient functions of the system. Click the icon of the media you want to play. With one-click, you can jump to the section of each media!
Page 33 ontents Before Use Radio and HD Radio™ Tunzwer Operation 2 WARNING _______________________ 4 Radio/HD Radio Tuner Basic Operation __ 58 How to Read this Manual Memory Operation __________________ 61 Basic Operations Selecting Operation _________________ 62 Functions of the Buttons Traffic Information __________________ 64 on the Front Panel _________________ 6 Receive Mode ______________________ 64 Turning on the Unit _________________ 10...
Page 34 Setting Up Troubleshooting Monitor Screen Setup _______________ 92 Problems and Solutions ______________ 122 View Camera Control ________________ 93 Error Messages _____________________ 123 System Setup ______________________ 93 Resetting the Unit __________________ 125 Display Setup ______________________ 98 Appendix Navigation Setup ___________________ 101 Playable Media and Files _____________ 126 Camera Setup ______________________ 102 Status Bar Indicator Items ____________ 130...
Page 35: Before Use
• When you purchase optional accessories, • Do not use disc type accessories. check with your Kenwood dealer to make • Clean from the center of the disc and move sure that they work with your model and in outward.
Page 36: How To Read This Manual
Return to the Top page How To Read This Manual ow to Read this Manual Link header You can refer each section or top page Return to the Top page CD, Disc, iPod, USB device with one-click. Operation title Search Operation Introduces the function.
Page 37: Basic Operations
Basic Operations asic Operations unctions of the Buttons on the Front Panel DNX891HD/ DNX7710BT/ DNX771HD NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.
Page 38 Return to the Top page Basic Operations Number Name Motion ﬁ (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.125). • This indicator flashes when the vehicle ignition is off (P.96). ∞, 5 (Vol) •...
Page 39 Return to the Top page Basic Operations DNX691HD/DNX571HD/DNX5710BT/DNX571EX NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. • In this manual, each model name is abbreviated as follows. DNX691HD: DNX571HD, DNX571EX, DNX5710BT: If above icons are showed, read the article applicable to the unit you use.
Page 40 Return to the Top page Basic Operations Number Name Motion Disc insert • A slot to insert a disc media. slot 0 (Eject) • Ejects the disc. • Pressing for 1 second ejects the disc forcibly. ﬁ (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.125).
Page 41: Turning On The Unit
Return to the Top page Basic Operations urning on the Unit The method of turning on is different depending on the model. Press the <MENU> button. The unit is turned on. ● To turn off the unit: Press the <MENU> button for 1 second. If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.11).
Page 42: Initial Setup
Return to the Top page Basic Operations Initial setup Perform this setup when you use this unit first time or when you reset the unit (P.125). Set each item as follows. Locale Select the country for the navigation system. The language, the distance unit, and the gasoline unit are set. After setting, touch [Enter].
Page 43 Return to the Top page Basic Operations EXT SW (DNX891HD, DNX7710BT only) Control the external devices. 1 Touch [SET]. 2 Set device name, output pattern, and pulse set for each device. Then, touch [6]. EXT SW setup (P.96). For detailed operation, see Camera Set the parameters for the camera.
Page 44: How To Play Media
Return to the Top page Basic Operations ● To eject the disc: ow to Play Media Press the <0> button. Music CD and disc media Press the <0> button. USB device Connect the USB device with the USB cable. The panel opens. Insert the disc into the slot.
Page 45: Operating With The Top Menu Screen
Return to the Top page Basic Operations perating with the Top Menu Screen Most functions can be performed from the Top Menu screen. Touch [Menu] on any screen. NOTE • If [Menu] is not displayed during video/picture playback, press the <MENU>...
Page 46 Return to the Top page Basic Operations From this screen, you can perform the following functions. Function Icon Operation Switch the audio source Touch the icon of the desired source. etc. Switch the video source Touch the icon of the desired video source.
Page 47: Common Operations
(common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. (DNX891HD, DNX7710BT only) : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen.
Page 48 Return to the Top page Basic Operations Flick scrolling You can scroll the list screen by flicking the screen up/down or right/left.
Page 49: Navigation Operation
Return to the Top page Basic Operations avigation Operation For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen Press the <NAV> button. The navigation screen appears. Control audio from the navigation screen You can control audio sources while the navigation screen is displayed.
Page 50 Return to the Top page Basic Operations Touch [ ] or [ ] in the navigation screen. Touching this area displays the audio screen. : Displays the navigation and control : Displays the navigation and current keys of the current source. video/picture playback display.
Page 51: Oem Features Operation
Return to the Top page Basic Operations EM Features Operation By connecting this unit to the bus system of the vehicle using an iDataLink (commercially available), this unit can access the satellite radio source provided for the vehicle and vehicle information can be displayed on this unit.
Page 52 Return to the Top page Basic Operations : Displays information about the air : Displays information about the conditioner of the vehicle. instruments such as a speedometer. : Displays information about the tire : Displays information about the pressures of the vehicle. Parking Distance Sensor of the vehicle.
Page 53: Dvd/Video Cd (Vcd) Operation
Return to the Top page DVD/Video CD Operation VD/Video CD (VCD) Operation DVD/VCD Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE Switching the operation mode • Set the remote control mode switch to DVD mode before starting operation, see (P.119).
Page 54 Return to the Top page DVD/Video CD Operation 5 Sub function menu The following functions can be performed by using keys in this area. • Repeats the current content: Touch [ ]. Each time you touch the key, repeat mode switches in the following sequence;...
Page 55 Touch to display the SETUP Menu screen. See AUDIO] Controlling Audio (P.106). Touch to display the Audio Control screen. See EXT SW] (DNX891HD, DNX7710BT only) External Device Control (P.104). Touch to control the external device power supply. For details, see [ REAR...
Page 56: Dvd Disc Menu Operation
Return to the Top page DVD/Video CD Operation Highlight control DVD Disc Menu Operation Highlight control lets you control the DVD You can set up some items in the DVD-VIDEO menu by touching the menu key directly on disc menu. the screen.
Page 57: Zoom Control For Dvd And Vcd
Return to the Top page DVD/Video CD Operation DVD play mode setting Zoom Control For DVD And VCD You can select DVD play mode. You can enlarge Playback screen for DVD and VCD. Touch [Next] in the Menu Control screen. For VCD, touch illustrated area during playback.
Page 58 Return to the Top page DVD/Video CD Operation * This function may not be performed depending on the disc. NOTE • You cannot touch the menu keys directly on the screen when zooming.
Page 59: Dvd Setup
Return to the Top page DVD/Video CD Operation DVD Setup You can set up the DVD playback functions. NOTE • Each operation in this section can be started from Operating the Top Menu screen. For details, see with the Top Menu Screen (P.14).
Page 60: Language Setup
Return to the Top page DVD/Video CD Operation Language setup Stream Information Displays the present source information. This setting is for the language used in the The stream (Dolby Digital, Linear PCM, MPEG, menu, subtitle, and voice. You cannot setup WMA or AAC) appears.
Page 61: Disc Setup
Return to the Top page DVD/Video CD Operation Parental level Disc setup Sets a parental level. You cannot setup this Performs setup when using disc media. item during DVD playback. Touch [SET] of [DISC SETUP]. Touch [SET] of [Parental Level]. DISC SETUP screen appears.
Page 62 Return to the Top page DVD/Video CD Operation...
Page 63: Cd/Audio And Visual Files/ Ipod/App Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation D/Audio and Visual Files/iPod/App Operation Music/Video/Picture Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE Switching the operation • Set the remote controller mode switch to AUD mode before starting operation, see mode (P.119).
Page 64 Return to the Top page CD/Audio and Visual Files/iPod/App Operation • iPod (P.35) • Pandora (P.45) • iHeartRadio (P.48) • Apps (P.51) Music CD and disc media NOTE • In this manual, “Music CD” will be referred to as the general CDs which include music tracks in. “Disc media”...
Page 65 Return to the Top page CD/Audio and Visual Files/iPod/App Operation 7 Sub function menu Sub function Various functions can be performed by using keys in this area. For details on the keys, see menu (P.38). 8 List switching key Touch to switch between the track list and the CD-TEXT display (CD)/ID3 tag information (disc media only).
Page 66 Return to the Top page CD/Audio and Visual Files/iPod/App Operation USB device and iPod NOTE • The screen shot below is for USB device. It may be different from the one for iPod. Simple Control screen List Control screen 1 Information display Displays the following information.
Page 67 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Picture/video screen 9 Searching file area (picture/video file only) • Touch to search the next/previous file. • During slide show in USB mode, touching each area searches the next/previous music file. •...
Page 68 Touch to display the SETUP Menu screen. See AUDIO] Controlling Audio (P.106). Touch to display the Audio Control screen. See EXT SW] (DNX891HD, DNX7710BT only) External Device Control (P.104). Touch to control the external device power supply. For details, see [ REAR...
Page 69 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Sub function menu Music CD Disc media iPod USB device The following functions can be performed by using keys in this area. Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following sequence;...
Page 70: Search Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation Other search Search Operation When you want to narrow the list down, You can search music, video or picture files there are other search ways. by the following operations. This function is not available when music CD is the current source.
Page 71 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Category search (USB device and iPod Link search (USB device and iPod only) only) Touch the desired item from the left part of the screen. You can select from Touch the desired category from the artist, album, genre and composer.
Page 72 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Folder search (USB device and disc Picture search (USB device only) media only) Touch the desired picture. Touch the desired folder. The selected picture appears in full screen. Folders in the selected source are displayed See number 9-10 in USB device and iPod in the center.
Page 73 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Search from album artwork Touch [ 3 ] on the selected artwork. The first song in the album is played. (USB device and iPod only) In addition, you can create your original You can search music files by selecting the playlist from this screen.
Page 74 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Favorite list NOTE You can create an original playlist of your • The favorite list is played to the right starting with favorite 10 albums by selecting album the selected album. artworks.
Page 75: Movie Control
Return to the Top page CD/Audio and Visual Files/iPod/App Operation Movie Control You can adjust the movie playback from a disc media. In the playback screen, touch illustrated area. Movie Control screen appears. Perform desired operation as follows. Changes subtitle language Touch [Subtitle].
Page 76: Pandora® Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation Pandora® Operation You can listen to the Pandora® on this unit by controlling the application installed in the iPhone or Bluetooth device. To enter Pandora mode, touch [Pandora] icon in the Top Menu screen. NOTE •...
Page 77 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Multi function menu Sub function menu The following functions can be performed by The following functions can be performed by using keys in this area. using keys in this area. Status bar in center Searches for a station.
Page 78 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Station list screen Genre list screen You can perform the following functions You can perform the following functions from this screen. from this screen. The selected genre is created as a new Selects the station station.
Page 79: Iheartradio Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation iHeartRadio Operation You can listen to the iHeartRadio on this unit by controlling the application installed in the iPhone or Android. To enter iHeartRadio mode, touch [iHeartRadio] icon in the Top Menu screen. NOTE •...
Page 80 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Multi function menu Station search You can list and select station. Touch [ ] in the control screen. The following functions can be performed by using keys in this area. The Station Search screen appears.
Page 81 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Discovery tuner My stations edit Touch [ ] in the Station Search You can set the variety level in a custom screen. station. Station Edit screen appears. Touch [ ] in the control screen. Select the station to delete from My The Discovery tuner select screen appears.
Page 82: Apps Operation
Return to the Top page CD/Audio and Visual Files/iPod/App Operation Apps Operation You can listen to music or watch video from the Apps operating on iPod touch/iPhone or Android. To enter Apps mode, touch [APPS] icon in the Top Menu screen. NOTE •...
Page 83: Usb/Ipod/Divx Setup
CD/Audio and Visual Files/iPod/App Operation USB setup USB/iPod/DivX Setup You can perform setup when using USB/ Set each item as follows. iPod/ DivX (DNX891HD/ DNX7710BT/ DNX5710BT). NOTE • Each operation in this section can be started from Operating the Top Menu screen. For details, see with the Top Menu Screen (P.14).
Page 84: Ipod Setup
Return to the Top page CD/Audio and Visual Files/iPod/App Operation iPod setup Set each item as follows. AudioBook Speed Sets the audio book playback speed. Select from [Slow], [Normal] (default), and [Fast]. Wide Screen* Sets Wide Screen. Set [ON] (default) or [OFF]. On Screen iPod Sets how to display the information of the iPod.
Page 85 Return to the Top page CD/Audio and Visual Files/iPod/App Operation iPod/iPhone connection setup NOTE Touch [iPod Connection Setup] in the • For the details of the necessary cable and adapter iPod Settings screen. Music/ to connect with iPod/iPhone, refer to Video/Picture Basic Operation (P.32).
Page 86 Return to the Top page CD/Audio and Visual Files/iPod/App Operation...
Page 87 Return to the Top page CD/Audio and Visual Files/iPod/App Operation Application link setup Select the way to connect the device with this unit. Sets the device an application is installed in and the app is selected as the source. Touch [CHANGE]. When selecting [iPod / iPhone] USB + AV-IN Select when connecting with KCA-iP202.
Page 88 Return to the Top page CD/Audio and Visual Files/iPod/App Operation DivX(R) VOD (DNX891HD/ NOTE DNX7710BT/ DNX5710BT) • This setup can be set when in STANDBY source. • For the details of the necessary cable and adapter This feature is available only for Central and to connect with iPod/iPhone and Android, refer to South America sales area.
Page 89: Radio And Hd Radio™ Tunzwer Operation
• Set the remote control mode switch to AUD mode before starting operation, see (P.119). • HD Radio broadcasting can be received only by the DNX891HD, DNX771HD, DNX691HD, DNX571HD, and DNX571EX. • HD Radio broadcasting is for North American sales area only.
Page 90 Return to the Top page Radio and HD Radio Tuner Operation 6 Preset list Displays the list of preset stations or channels and the information. 7 Sub function menu The following functions can be performed by using keys in this area. •...
Page 91 Touch to display the SETUP Menu screen. See AUDIO] Controlling Audio (P.106). Touch to display the Audio Control screen. See EXT SW] (DNX891HD, DNX7710BT only) External Device Control (P.104). Touch to control the external device power supply. For details, see [ REAR Touch to mute the rear speaker.
Page 92: Memory Operation
Return to the Top page Radio and HD Radio Tuner Operation Manual memory Memory Operation You can store the current receiving station or Auto memory channel in memory. Select a station or channel you wish to You can store stations with good reception in store in memory.
Page 93: Selecting Operation
Return to the Top page Radio and HD Radio Tuner Operation Search by program type Selecting Operation (FM tuner and HD Radio tuner only) Preset select You can tune to a station with a specific You can list and select memorized station or program type when listening to FM.
Page 94 Return to the Top page Radio and HD Radio Tuner Operation Direct search (HD Radio tuner Category/Channel search (HD only) Radio tuner only) You can tune in by entering the desired You can specify the desired category and frequency or channel number. select a channel.
Page 95: Traffic Information
Return to the Top page Radio and HD Radio Tuner Operation Traffic Information Receive Mode (HD Radio tuner (HD Radio tuner only) only) You can listen and watch the traffic You can set the radio broadcasts receive information automatically when a traffic mode.
Page 96: Bookmark
Return to the Top page Radio and HD Radio Tuner Operation Bookmark list Bookmark (HD Radio tuner only) Displaying a list of registered bookmarks and detailed information and QR code of the Stores tag information (title, artist, album, song. URL, and description) about the song you are listening to now.
Page 97 Return to the Top page Radio and HD Radio Tuner Operation Bookmark delete Touch [ Deletes all the selected bookmark(s) Deleting a bookmark. Touch [ ] in the control screen. The multi function menu appears. Touch [ ] in the multi function menu. List select screen appears.
Page 98 Return to the Top page Radio and HD Radio Tuner Operation...
Page 99: Siriusxm® Operation
Return to the Top page SiriusXM Operation iriusXM® Operation SiriusXM® Basic Operation Most functions can be controlled from the source control screen. Before use • SiriusXM® Satellite Radio operation requires the connection of the optional SiriusXM Connect Vehicle Tuner and service.
Page 100 Return to the Top page SiriusXM Operation 4 Preset key/Multi function menu Recalls the memorized channel. When touched for 2 seconds, store the current receiving channel in memory. When switched, various functions can be performed by using keys in this area. Multi function menu (P.69).
Page 101 Touch to display the SETUP Menu screen. See AUDIO] Controlling Audio (P.106). Touch to display the Audio Control screen. See EXT SW] (DNX891HD only) External Device Control (P.104). Touch to control the external device power supply. For details, see [ REAR...
Page 102: Memory Operation
Return to the Top page SiriusXM Operation Memory Operation Selecting Operation Manual memory Preset select You can store the current receiving station or You can list and select memorized station or channel in memory. channel. Selecting from the multi function menu Select a station or channel you wish to store in memory.
Page 103: Direct Search
Return to the Top page SiriusXM Operation Direct search Category/Channel search You can tune in by entering the desired You can specify the desired category and frequency or channel number. select a channel. Touch illustrated area. Touch [ ] in the control screen. The multi function menu appears.
Page 104: Content Alert
Return to the Top page SiriusXM Operation Content alert When a broadcast program related to the registered artist, song or team starts, a message appears to allow you to switch the current channel to the relevant channel. When the broadcast of the registered content starts, an Alert screen appears.
Page 105: Siriusxm Replay
Return to the Top page SiriusXM Operation Program list SiriusXM Replay™ Touching this plays back the displayed You can replay last 60 minutes of current program. channel. [Info Change] Touch [SiriusXM] in the Top Menu. Touching this allows you to switch among the Artist name, Song title, Category name, and Content info cyclically.
Page 106: Smart Favorites, Tunestart
Return to the Top page SiriusXM Operation Smart Favorites, TuneStart™ TuneScan™ Station memory number 1 though 6 of TuneScan™ is a feature that plays samples current band are Smart Favorite channels. from the starts of multiple buffered songs SiriusXM Vehicle Tuner automatically from each of the Smart Favorite channels buffered the broadcast audio content of the that predominantly play music selections.
Page 107: Siriusxm Setup
Return to the Top page SiriusXM Operation Parental code SiriusXM Setup You can set a SiriusXM parental code. NOTE Touch [Change] of [Parental Code] in • Each operation in this section can be started from the SiriusXM SETUP screen. Operating the Top Menu screen.
Page 108 Return to the Top page SiriusXM Operation Parental control NOTE • Touch [All Channels] to display all the channels. Parental control is a feature that provides the user with the ability to prevent unauthorized access to mature content and user selected Touch each channel list and set on or channels.
Page 109 Return to the Top page SiriusXM Operation Skip channel select Content alerts setup You can set the undesired channels to skip. You can turn on or off the Content alerts function. Touch [SET] of [Skip Channel Select]. Touch [ON] or [OFF] of [Content alerts] Skip Category Select screen appears.
Page 110 Return to the Top page SiriusXM Operation Content alerts Content Set City select for Traffic & Weather Jump You can set a content for Content alerts. You can select a city for which traffic Touch [SET] of [Content alerts Content information or weather forecast is to be Set] in the SiriusXM SETUP screen.
Page 111 Return to the Top page SiriusXM Operation TuneStart™ Reset Touch [ON] or [OFF] of [Tune Start] in Touch [Reset] of [SiriusXM Reset] for 2 the SiriusXM SETUP screen. seconds in the SiriusXM SETUP screen. Turns the Tune start on or off. All SiriusXM setting returns to default.
Page 112 Return to the Top page SiriusXM Operation...
Page 113: Bluetooth Control
Bluetooth SETUP screen appears. See the following section for each setting. Sound codec • Registering the Bluetooth Unit (P.83) SBC, AAC, MP3, aptX (DNX891HD, DNX7710BT only) • Connecting the Bluetooth unit (P.83) NOTE • For the cell-phones verified for compatibility, access the following URL: http://www.kenwood.com/cs/ce/bt/.
Page 114: Connecting The Bluetooth Unit
Return to the Top page Bluetooth Control Registering the Bluetooth Unit Connecting the Bluetooth unit Touch the device name you want to Touch [Search]. connect. Searched Device List screen appears. Profile select screen appears. NOTE NOTE • You cannot register the Bluetooth unit when you •...
Page 115: Playing Bluetooth Audio Device
Setting Up (P.92). • [ SETUP]: Touch to display the SETUP Menu screen. See • [ EXT SW] Control the external device power supply. (DNX891HD, DNX7710BT only) External Device Control (P.104). For details, see • [ REAR ]: Touch to mute the rear speaker.
Page 116: Using Hands-Free Unit
Return to the Top page Bluetooth Control Select a dialing method. Using Hands-Free Unit You can use telephone function by connecting the Bluetooth telephone to this unit. Making a call Press the <TEL> button. See the following table for each method. Call by entering a phone number 1 Touch [ 2 Enter a phone number with number keys.
Page 117: Receiving A Call
Return to the Top page Bluetooth Control Receiving a call *1 You can sort the list to begin with touched character. Touch [ ] to answer a phone call or ] to reject an incoming call. • Characters with no corresponding name will not appear.
Page 118: Phone Number Preset
Return to the Top page Bluetooth Control Phone number preset Operations during a call Adjust the receiver volume You can register frequently used phone numbers to this unit. Press the <∞> or <5> button. Enter the number you want to register in Hands Free screen.
Page 119: Smartphone Link
Return to the Top page Bluetooth Control Voice Recognition Smartphone Link You can access the voice recognition function You can receive Garmin’s traffic information of the cell-phone connected to this unit. and weather forecast by connecting You can search the cell-phone phonebook your Android smartphone in which the by voice.
Page 120 Return to the Top page Bluetooth Control...
Page 121: Hands-Free Setup
Return to the Top page Bluetooth Control Set each item as follows. Hands-Free Setup You can perform various setup about handsfree function. Touch [Menu] on any screen. Touch [SETUP]. SETUP Menu screen appears. Touch [Bluetooth]. Bluetooth SETUP screen appears. Bluetooth HF/Audio Select the speakers to output the sound from Touch [TEL SET-UP] in the Bluetooth cell-phone (such as phone call voice and...
Page 122 Return to the Top page Bluetooth Control Sort Order Sets how to arrange the cell-phone phonebook. First: Arranges in the order of first name. Last (Default): Arranges in the order of last name. Echo Cancel Level Adjusts the level of echo cancellation. Default is “0”.
Page 123: Setting Up
Return to the Top page Setting Up etting Up Bright / Tint* / Color* / Contrast / Black / Monitor Screen Setup Sharpness* You can adjust image quality in iPod video, Adjusts each item. picture file, menu screen, etc. Dimmer Touch the lower left area of any screen Select dimmer mode.
Page 124: View Camera Control
• Set up the user interface (P.94) • Adjust touch panel (P.95) • Set up securityl (P.96) • Set up external switch (DNX891HD, 1 Guideline DNX7710BT only) (P.96) Touching each time turns on or off the • Set up memory (P.97)
Page 125: User Interface
Return to the Top page Setting Up User interface AUD Key Longer than 1 Second You can setup user interface parameters. You can set the operation performed when the AUDIO key is pressed for 1 second. Select from Touch [User Interface] in the list. ”V.OFF”/”CAM”.
Page 126: Touch Panel Adjustment
Return to the Top page Setting Up Touch panel adjustment Language setup Touch [SET] of [Language] in the User Interface screen. Touch [Touch] in the System Menu screen. Language Setting screen appears. Touch Panel Adjustment screen appears. Set each item as follows. Follow the instruction on the screen and touch the center of each Select Mode...
Page 127: Security Setup
Return to the Top page Setting Up Security setup EXT SW setup (DNX891HD, DNX7710BT) A red indicator will blink on the unit after the ACC is set to OFF, warning potential thieves. Set up the external switch power mode. If turned to “ON” (default), the security...
Page 128: Setup Memory
Return to the Top page Setting Up Setup memory Follow the instruction on the screen. Audio Control, AV-IN SETUP, Camera, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored.
Page 129: Display Setup
Return to the Top page Setting Up Monitor angle control Display Setup Touch [Menu] on any screen. You can adjust the position of the monitor. Touch [SETUP]. Touch [Angle] in the Display Menu SETUP Menu screen appears. screen. Angle setup screen appears. Touch [Display].
Page 130: Panel Color Coordinate
Return to the Top page Setting Up Panel color coordinate Registering original color You can register your original color. You can set the screen and button Touch [Adjust] in the Panel Color illumination color. Coordinate screen. The selectable items differ depending on the Panel Color RGB Coordinate screen unit.
Page 131: Changing Background Image
Return to the Top page Setting Up Changing background image display returns to the Background screen. You can load an image from the connected NOTE USB device and set it for the background • Touching [ ] rotates counter clockwise. image.
Page 132: Navigation Setup
Return to the Top page Setting Up Navigation Setup You can set navigation parameters. Touch [Menu] on any screen. Touch [SETUP]. SETUP Menu screen appears. Touch [Navigation]. Navigation SETUP screen appears. Set each item as follows. NAV Interrupt Speaker Selects speakers used for voice guidance of the navigation system.
Page 133: Camera Setup
Return to the Top page Setting Up R-CAM Settings* Camera Setup Adjusts the CMOS-300 series with ID 1 set. You can set camera parameters. For details, see the instruction manual of your camera. Touch [Menu] on any screen. Front Camera* Touch [SETUP].
Page 134: Software Information
Return to the Top page Setting Up Software Information AV Input Setup Check the software version of this unit. You can set AV input parameters. Touch [Menu] on any screen. Touch [Menu] on any screen. Touch [SETUP]. Touch [SETUP]. SETUP Menu screen appears. SETUP Menu screen appears.
Page 135: Av Output Interface Setup
Return to the Top page Setting Up AV Output Interface Setup External Device Control (DNX891HD, DNX7710BT only) You can select an AV source to be output at the AV OUTPUT port. Default is “VIDEO1”. Control the external device power supply.
Page 136 Return to the Top page Setting Up...
Page 137: Controlling Audio
Return to the Top page Controlling Audio ontrolling Audio Setting Audio NOTE • Each operation in this section can be started from the multi function menu. Touch [Audio SETUP]. You can adjust the various settings such as audio balance or subwoofer level. Touch [Menu] on any screen.
Page 138 NOTE • Select “None” if you have no speakers. Touch the speaker you wish to adjust and set each item as follows. Tweeter (DNX891HD, DNX7710BT, DNX691HD only) You can set the tweeter when you are selecting front speakers. None, Small, Middle, Large X’over...
Page 139 Adjusts the tweeter level. (When front is adjustment of sound output for each channel) to selected on Speaker Select screen) have the highest surround effects. Gain (DNX891HD, DNX7710BT, DNX691HD only) Adjusts the front speaker, rear speaker, or subwoofer level. Phase* Sets the phase of subwoofer output.
Page 140 Return to the Top page Controlling Audio DSP select Speaker location setup In the Car Type screen, touch [Location]. You can select whether using DSP (Digital Speaker Location screen appears. Signal Processor) System. Select the speaker locations using [3]. Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen.
Page 141: Controlling General Audio
Return to the Top page Controlling Audio Controlling General Audio Equalizer Control You can adjust equalizer by selecting the Touch [Audio Control]. optimized setting for each category. Touch [Equalizer]. Set each item as follows. Equalizer screen appears. Fader #/Balance # Adjust the volume balance around the touched area.
Page 142 Loudness Sets the amounts of boost of low and high NOTE tones. • [iPod] is available only during iPod source. DNX891HD, DNX7710BT, DNX691HD: “OFF”, “Low”, “High” Controlling equalizer manually DNX771HD, : “OFF”, “ON” This setting cannot be performed when you SW Level select [iPod] in the Equalizer screen.
Page 143: Zone Control
• Output from the subwoofer (P.110) • Subwoofer Level/ Bass Boost • Equalizer Control/ Space Enhancer (DNX891HD, DNX7710BT, DNX691HD)/ Listening Position (P.110, 113, 115) • DSP Bypass Control/ Speaker Setup/ Car Type (P.109, 107, 108) Setup •...
Page 144: Sound Effect
• This setting is not available during HD Radio tuner source. See the following section for each setting. • Set space enhancer (DNX891HD, DNX7710BT, DNX691HD) (P.113) • Set drive equalizer (P.114) • Set up elevation (DNX891HD, DNX7710BT, DNX691HD) (P.114) • Set up realizer or supreme (DNX891HD, DNX7710BT, DNX691HD) (P.115)
Page 145 You can raise the sound position heard from [Drive Equalizer+]. the speakers virtually. Touch [Elevation] in the Sound Effect screen. DNX891HD, DNX7710BT, DNX691HD: The sound quality is automatically optimized to meet the current car speed by GPS. Elevation screen appears.
Page 146: Listening Position
Return to the Top page Controlling Audio Realizer and Supreme Listening Position (DNX891HD, DNX7710BT, You can adjust the sound effects according DNX691HD) to your listening position. You can restore the sound lost due to audio Touch [Position]. compression to a realistic sound.
Page 147 Return to the Top page Controlling Audio Position DTA control NOTE • Make fine adjustment of the delay time of the You can fine-adjust your listening position. speaker output specified here to have a more suitable environment for your vehicle. In Position screen, touch [Adjust].
Page 148 Return to the Top page Controlling Audio...
Page 149: Remote Control
Remote control emote control This unit can be operated using the remote control. For DNX891HD, DNX7710BT, DNX691HD, and DNX5710BT, the remote control is supplied with the unit. For DNX771HD, DNX571HD and DNX571EX the remote control is the optional accessory (KCA- RCDV331).
Page 150: Functions Of The Remote Control Buttons
Return to the Top page Remote control Functions of the Remote control Buttons Switching the operation mode Direct search mode The functions operated from the remote Using the remote control, you can jump control differ depending on the position of directly to the desired file, track chapter, etc.
Page 151 Return to the Top page Remote control Location of Function Name the mode switch − Switches to the source to be played. In hands-free mode, hangs up the phone. − Switches between the navigation and the source screens. MENU Stops playing and memorizes the last point where the disc stopped.
Page 152 Return to the Top page Remote control Location of Function Name the mode switch VOICE Switches navigation display on/off. Displays the DVD menu. Turns the playback control on or off while playing VCD. Speaks the voice guidance. 10 VIEW AUD, DVD Switches the AV source to be output.
Page 153: Troubleshooting
Return to the Top page Troubleshooting roubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring.
Page 154: Error Messages
Mecha Error The disc player is malfunctioning. Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error An unplayable disc is inserted. Change the disc.
Page 155 Return to the Top page Troubleshooting Error Message Cause Solution Disconnected The iPod/Bluetooth audio player Change the source to any source other than (iPod) is selected as a source although iPod/Bluetooth. Connect an iPod/Bluetooth no iPod/Bluetooth audio player is audio player, and change the source to iPod/ connected.
Page 156: Resetting The Unit
Return to the Top page Troubleshooting Resetting the Unit If the unit or the connected unit fails to operate properly, reset the unit. Press the <Reset> button. The unit returns to factory settings. NOTE • Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device How to connected can damage the data stored in the USB device.
Page 157: Appendix
× Super audio CD Only CD layer can be played. *1 Incompatible with 8 cm (3 inch) discs. *2 Function of DNX891HD, DNX7710BT, DNX5710BT ‡ : Playback is possible. % : Playback is partly possible. × : Playback is impossible.
Page 158 *Mass-storage-class USB device only impossible. • DivX (.divx, .div, .avi) (A “DualDisc” is a disc with one surface containing DVD Function of DNX891HD, DNX7710BT, DNX5710BT standard signals and the other surface containing DVD only music CD signals.) • H.264/MPEG-4 AVC (.mp4, .m4v) Mass-storage-class USB device only ■...
Page 159 Changing the browse item will display a correct title, etc. • When the iPod is connected to this unit, “KENWOOD” or “✓” is displayed on the iPod to indicate that you cannot operate the iPod.
Page 160 Return to the Top page Appendix...
Page 161: Status Bar Indicator Items
Return to the Top page Appendix Status Bar Indicator Items Shown below is a list of indicators displayed on the status bar in the screen. Current status of this unit is displayed on the bar. Status bar C-REP ■ General The chapter repeat function is on.
Page 162 Return to the Top page Appendix VER1 The VCD version is 1. Indicates the reception state of traffic information. VER2 • White: TP is being received. The VCD version is 2. • Orange: TP is not being received. The repeat function is on. ■...
Page 163: Region Codes In The World
Return to the Top page Appendix Region Codes in the World The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. ■ DVD disc marks ■ Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing.
Page 164: Dvd Language Codes
Return to the Top page Appendix DVD Language Codes Code Language Code Language Code Language Afar Interlingua Kirundi Abkhazian Interlingue Romanian Afrikaans Inupiak Russian Amharic Indonesian Kinyarwanda Arabic Icelandic Sanskrit Assamese Italian Sindhi Aymara Japanese Sangho Azerbaijani Javanese Serbo-Croatian Bashkir Georgian Singhalese Byelorussian...
Page 165: Specifications
DNX5710BT : Line of sight approx. 10m (32.8 ft) : 0.010 % (1 kHz) Audio Codec S/N Ratio (dB) SBC/ AAC/ MP3/ aptX (DNX891HD, DNX7710BT only) DNX891HD, DNX7710BT : 100 dB (DVD-Video 96 kHz) DNX771HD, DNX691HD, DNX571HD, DNX571EX, DNX5710BT : 98 dB (DVD-Video 96 kHz)
Page 166 • HFP (V1.6) (Hands Free Profile) : -50 – +10 dB • SPP (Serial Port Profile) • SDP (Service Discovery Profile) ■ Digital FM tuner section (DNX891HD, • A2DP (Advanced Audio Distribution Profile) DNX771HD, DNX691HD, DNX571HD, • AVRCP (V1.4) (Audio/Video Remote Control Profile) DNX571EX) •...
Page 167 : 2.0 kg (4.4 lbs) Speaker Impedance : 4 – 8 Ω NOTE ■ External SW (DNX891HD, DNX7710BT) • Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels Maximum Power Supply Current may not light or may light incorrectly.
Page 168: About This Unit
Bluetooth SIG, Inc. and any use of such marks • ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® by JVC KENWOOD Corporation is under license. device must be registered in order to play purchased Other trademarks and trade names are those of their DivX Video-on-Demand (VOD) movies.
Page 169 Return to the Top page Appendix • About Pandora®: • libFLAC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,20 Requirements for listening to the Pandora® are as 07,2008,2009 Josh Coalson follows: iPhone or iPod touch Redistribution and use in source and binary forms, with or without modification, are permitted provided •...
Page 170 Return to the Top page Appendix • About iHeartRadio®: Requirements for using iHeartAuto™ are as follows: iPhone or iPod touch • Use an Apple iPhone or iPod touch running iOS5 or later. • Search for “iHeartAuto” in the Apple App Store to find and install the most current version of the iHeartAuto™...
Page 171 Return to the Top page Appendix DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX: DNX571EX: ■ FCC WARNING ■ IC (Industry Canada) Notice This equipment may generate or use radio This device complies with Industry Canada licence- frequency energy. Changes or modifications to this exempt RSS standard(s).
Page 172 Return to the Top page Appendix ■ CALIFORNIA, USA This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. ■ Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de...
Page 174 GPS NAVIGATION SYSTEM DNX891HD DNX771HD DNX691HD DNX571HD DNX571EX GPS NAVIGATION INSTRUCTION MANUAL © IM382_Nav_K_En_00...
Page 175 Contents Navigation End-User License Agreements Starting a Route Previewing Multiple Routes Following a Route Getting Started Using the Navigation Map Using the Navigation System Adding a Point to a Route Help When You Need It Taking a Detour Searching Help Topics Stopping the Route Status Bar Icons Using Suggested Routes...
Page 176 Using the Apps Traffic Information About Smartphone Link Traffic Subscription Activation Downloading Smartphone Link Understanding Traffic Connecting to Smartphone Link Traffic Data Using Smartphone Link Sending a Location from Your Phone About the Traffic Icon Disabling Calls While Connected Traffic on Your Route About Garmin Live Services Viewing Traffic on Your Route Subscribing to Garmin Live Services...
Page 177: End-User License Agreements
Software License Agreement under copyright laws and international copyright treaties. The Garmin Products are licensed, not BY USING THE DNX891HD / DNX771HD / sold. The structure, organization and code of DNX691HD / DNX571HD / DNX571EX, YOU AGREE the Software and Application are valuable trade TO BE BOUND BY THE TERMS AND CONDITIONS OF secrets of Garmin and/or its third-party providers.
Page 178 otherwise connected to or in communication for solely personal use, or if applicable, for use with vehicles, and which are capable of dispatch, in your business’ internal operations, and not for service bureau, time-sharing, resale or other fleet management or similar applications where the Content is used by a central control center in similar purposes.
Page 179 End-User License Agreements (ii) the useful life of the purchaser’s smartphone LICENSORS, including the licensors, service (if applicable), or (iii) as long as Garmin receives providers, channel partners, suppliers and affiliated Content from its third party content supplier, companies of Garmin and its licensors, DISCLAIM whichever of the three periods is shortest.
Page 180 OR UPLOADED OR OTHERWISE OBTAINED services, processes, hypertext links to third parties THROUGH THE SOFTWARE IS DONE AT YOUR or other Content by trade name, trademark, OWN DISCRETION AND RISK. YOU WILL BE manufacturer, supplier or otherwise does not SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR necessarily constitute or imply its endorsement, ELECTRONIC COMMUNICATION DEVICE OR ANY sponsorship or recommendation by Garmin or...
Page 181 End-User License Agreements (ii) Garmin terminates this Agreement for any The above terms and conditions shall be governed reason, including, but not limited to, if Garmin by the laws of Kansas, without giving effect to (i) its finds that you have violated any of the terms of conflict of laws provisions, or (ii) the United Nations this Agreement.
Page 182 Platform Services. If your Application is provided access to Location Platform Services, by accessing such Location Platform Services you agree to application of the Nokia Terms of Service at http:// here.com/services/terms and the Nokia Privacy Policy at http://www.nokia.com/global/privacy/ privacy/policy/privacy-policy/. English...
Page 183 agree to use it at your own risk. HERE or TPTP (and Traffic End User License Agreement their respective affiliates) and Garmin Ltd. (and Your Garmin product may be equipped to receive its subsidiaries) make no warranty of fitness or traffic data.
Page 184 terms of this Agreement. Your traffic subscription agency, or any federal official refuses to use the may not be transferred to another person or legend provided herein, the Contracting Officer, another Garmin product. Traffic services are in federal government agency, or any federal official part geographically restricted to the reception must notify HERE prior to seeking additional or and transmission range of the radio transmitters in...
Page 185: Getting Started
Getting Started The first time you use your Kenwood Navigation System, you need to set up your system. The Help menu provides additional information. Help When You Need It WARNING See "Safety Precautions and Important Information" Select Apps > Help to view information in the Quick Start Guide for product warnings and about using the device.
Page 186: Satellite Signals
Adding a Shortcut Satellite Signals You can add shortcuts to the Where To? menu. A After your vehicle is turned on, the navigation shortcut can point to a location, a category, or a system begins acquiring satellite signals. The search tool. The Where To? menu can contain up to system may need a clear view of the sky to acquire 36 shortcut icons.
Page 187: Finding Locations
Finding Locations The navigation system offers many methods for finding locations. The detailed maps loaded in your navigation system contain locations, such as restaurants, hotels, and auto services. You can use categories to browse for nearby businesses and attractions. Finding a Location by Category Enter a search term.
Page 188: Finding Fuel Stations And Prices
Finding Fuel Stations and Prices Finding a City Before you can use this feature, you must Before you can find a city, you must add a subscribe to the Fuel Price service, and your shortcut to the cities search tool (page 13).
Page 189: Finding A Location Using Coordinates
Finding Locations Finding a Location Using Coordinates Select an option: Before you can find a location using coordinates, • Select a location marker. you must add a shortcut to the coordinates • Select a point, such as a street, intersection, or search tool (page 13). address location. You can find a location using latitude and If necessary, select the location description longitude coordinates.
Page 190: Going Home
Going Home Select an area on the map. Select Where To? > Go Home. The address of the location appears at the bottom of the screen. Editing Your Home Location Information Select the location description. Select Where To? > Saved > Home. Select Set Location. Select > > Edit. Saving a Location Enter your changes.
Page 191: Starting A Route To A Saved Location
Finding Locations Starting a Route to a Saved Location Assigning Categories to a Saved Location You can add custom categories to organize your Select Where To? > Saved. saved locations. ⁄ If necessary, select a category, or select All Saved Places. •...
Page 192: Navigation
Navigation You can create, customize, and edit your routes. Starting a Route Using the Navigation Map Search for a location (page 14). From the main menu, select View Map. Select a location. If the zoom controls are hidden, select the map to display the zoom controls.
Page 193: Adding A Point To A Route
Navigation Adding a Point to a Route Using Suggested Routes Before you can use this feature, you must save at While navigating a route, select least one location and enable the travel history return to the main menu. feature (page 17).
Page 194: Navigating To An Exit
Navigating to an Exit Adding a Custom Avoidance Area Custom avoidances allow you to avoid specific From the map, select > Exit Services > areas and sections of road. You can enable and disable custom avoidances as needed. Select Go!. Select Settings >...
Page 195: Deleting Custom Avoidances
Navigation Deleting Custom Avoidances Select Settings > Navigation > Custom Avoidances. Select an option: • To delete all custom avoidances, select • To delete one custom avoidance, select the avoidance, and select > Delete. Enabling Advanced Detours Select Settings > Navigation > Advanced Detours. Taking a Detour Around Specified Areas You can take a detour for a specified distance along your route or detour around specific roads.
Page 196: The Map Pages
The Map Pages You can customize which data appear on the map and view upcoming turns and current location information. Customizing the Map Layers Changing the Map Perspective You can customize which data appear on the Select Settings > Map & Vehicle > Driving map, such as icons for points of interest and road Map View.
Page 197: Viewing A List Of Turns
The Map Pages Viewing a List of Turns Viewing Junctions When you are navigating a route, you can view all While navigating a route, you can view the of the turns and maneuvers for your entire route junctions on major roadways. When you approach and the distance between turns.
Page 198: Resetting Trip Information
Resetting Trip Information From the map, select > Trip Computer. Select > Reset All. Select an option: • When not navigating a route, select Select All to reset every data field, except the speedometer, on the page. • Select Reset Trip Data to reset the information on the trip computer. • Select Reset Max. Speed to reset the maximum speed. • Select Reset Trip B to reset the odometer. Viewing Current Location Information You can use the Where Am I? page to view information about your current location.
Page 199: Using The Apps
Before you can connect to Smartphone Link, you must download and install the Smartphone Link application on your phone. Start Smartphone Link on your phone. See your other Kenwood system manuals and your phone owner's manual for connection information. appears in the status bar on your device when Smartphone Link is connected.
Page 200: About Garmin Live Services
About Garmin Live Services About ecoRoute Before you can use Garmin Live Services, your The ecoRoute™ feature calculates your vehicle device must be connected to a supported phone fuel economy, carbon footprint, and the fuel price (page 26). running Smartphone Link of navigating to a destination, and offers tools for improving fuel efficiency.
Page 201: Taking The Ecochallenge
Using the Apps Taking the ecoChallenge Viewing Your Fuel Economy The ecoChallenge helps you maximize your fuel Select Apps > ecoRoute™ > Fuel Economy. economy by scoring your driving habits. The higher your ecoChallenge scores, the more fuel The graph along the bottom shows your you save.
Page 202: Exporting A Mileage Report
Viewing the Weather Forecast Before you can use this feature, your device must Connect a USB mass storage device to your be connected to a supported phone running Kenwood unit. (page 26). This feature is not Smartphone Link available in all areas.
Page 203: Viewing Weather Alerts
Using the Apps Viewing Weather Alerts Editing a Trip Itinerary While you are traveling with your device, weather Select Apps > Trip Planner. alerts may appear on the map. You can also view a map of weather alerts near your current Select a saved trip.
Page 204: Using The World Clock
Using the World Clock Select Apps > World Clock. If necessary, select a city, enter a city name, and select Done. Viewing the World Map Select Apps > World Clock > Nighttime hours appear in the shaded area of the map. Finding Parking Before you can use this feature, you must subscribe to the Dynamic Parking service, and your device must be connected to a supported phone running Smartphone Link...
Page 205: Traffic Information
Traffic information is not available on all models or in all areas. Traffic Data Using Smartphone Link NOTICE Garmin and JVC KENWOOD is not responsible for You can purchase a traffic subscription to receive the accuracy or timeliness of the traffic information.
Page 206: Traffic On Your Route
Traffic on Your Route Viewing Traffic on the Map When calculating your route, the navigation The traffic map shows color-coded traffic flow system examines the current traffic and and delays on nearby roads. automatically optimizes the route for the shortest From the map, select time.
Page 207: About Traffic Cameras
Traffic Information About Traffic Cameras The traffic subscription code cannot be reused. You must obtain a new code each Before you can use this feature, you must time you renew your service. If you own subscribe to the photoLive service, and your multiple FM traffic receivers, you must device must be connected to a supported phone obtain a new code for each receiver. running Smartphone Link (page 26). This feature is not available in all areas.
Page 208: Customizing The Settings
Customizing the Settings You can customize the settings of your GPS navigation system. Customizing the Navigation System Changing the Navigation Settings Select Settings. Select Settings > Navigation. • Calculation Mode—sets route preference. Select a setting category. • Avoidances—sets road features to avoid on a route. •...
Page 209: Updating The Time Settings
Customizing the Settings Updating the Time Settings Restoring Settings You can restore a category of settings or all Select Settings > Units & Time. settings to the factory default values. • Current Time—select Automatic to update the time Select Settings. automatically.
Page 210: Appendix
Follow the on-screen instructions. WARNING Updating the Map Data Garmin and JVC KENWOOD are not responsible for You can purchase updated map data from Garmin the consequences of using custom POI databases, or ask your Kenwood dealer or Kenwood service or for the accuracy of custom POI databases.
Page 211 For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com/Kenwood. © 2014 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
Page 214 SOUS GARANTIE (d) Deteitos au danos em decorr!ncia de consertos reatizados por pessoas nao autorizadas: JVC KENWOOD DO BRASIL COMERCIO DE ELETRONICOS LTDA saul dans les cas ou les produits Kenwood sontemploy!s dans Au cas...

This manual is also suitable for:

Dnx7710bt Dnx771hd Dnx571ex Dnx5710bt Dnx691hd Dnx571hd

Kenwood DNX891HD Quick Start Manual

Ñ 2 English

Table of Contents

Before Use

How to Read this Manual

Basic Operations

DVD/Video CD (VCD) Operation

CD/Audio and Visual Files/ Ipod/App Operation

Radio and HD Radio™ Tunzwer Operation

Siriusxm® Operation

Bluetooth Control

Setting up

Controlling Audio

Remote Control

Troubleshooting

Appendix

Gps Navigation System

End-User License Agreements

Getting Started

Finding Locations

Navigation

The Map Pages

Using the Apps

Traffic Information

Customizing the Settings

Appendix

Quick Links

Quick Start Guide

Chapters

Related Manuals for Kenwood DNX891HD

Summary of Contents for Kenwood DNX891HD