hit counter script
GE WF180 User Manual

GE WF180 User Manual

Through the wall exhaust fan

Advertisement

Quick Links

e
Through the Wall Exhaust Fan
User's Guide
Item Stock Number(s): WF180

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electric shock and injury to person, including the following:
1. Read all instructions before installing or using
exhaust fan.
2. Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
3. Before servicing or cleaning the unit, switch power
off at service panel and lock the service disconnecting
means to prevent power from being switched on
SAVE THESE INSTRUCTIONS
210575001 Rev. A 1-08
a

GENERAL SAFETY INFORMATION

accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
4. Installation work and electrical wiring must be done
by qualified person(s) in accordance with all applicable
codes and standards, including fire-related construction.
5. Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of
www.geelectrical.com
WF180
1 of 8

Advertisement

Table of Contents
loading

Summary of Contents for GE WF180

  • Page 1: Important Instructions

    WF180 Through the Wall Exhaust Fan User’s Guide Item Stock Number(s): WF180 IMPORTANT INSTRUCTIONS - OPERATING MANUAL READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Installation Instructions

    GENERAL SAFETY INFORMATION (Continued) fuel burning equipment to prevent back drafting. Follow Screws the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society for Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local code authorities.
  • Page 3 10. On the interior flange of the housing, apply a generous amount of caulking and install the housing through the hole and onto the casing strips and secure in place using screws or nails (not included) through the predrilled holes on the four corners of the housing.
  • Page 4 3. Pull the electrical wires through the electrical SECTION 4 opening of the interior housing. Remove one of the Completing the Installation electrical knockouts of the wiring compartment and 1. Reinstall the fan’s motor bracket by sliding in place run wires through the opening making sure to leave and tightening the screws.
  • Page 5: Troubleshooting Guide

    Troubleshooting Guide Trouble Probable Cause Suggested Remedy 1. Fan does not operate when the switch is on. 1a. A fuse may be blown or a circuit tripped. 1a. Replace fuse or reset circuit breaker. 1b. Connector plug from motor is not plugged in. 1b.
  • Page 6: Warranty

    God. This warranty contains the sole and exclusive warranty of GE for claims based on defects in these products. Upon the expiration of the warranty period, all such liability shall terminate. There are no other warranties, whether written, oral, implied or statutory.
  • Page 7: Replacement Parts Diagram

    REPLACEMENT PARTS DIAGRAM Qty. Description Replacement Part # Qty. Description Replacement Part # Interior Housing 5S2203001 Wire Compartment Cover 5S2203012 Exterior Housing 5S2203002 Polarized Receptacle 5S1999001 Bushing 5S2203003 Blade 5S2203013 5S2203004 Motor 5S2203014 Gasket 5S2203005 Motor Bracket 5S2203015 Spring 5S2203006 Mounting Screws 5S2203016 Damper...
  • Page 8 210575001 Rev. A 1-08 www.geelectrical.com 8 of 8...

Table of Contents